| /* |
| * Driver for Realtek RTS51xx USB card reader |
| * |
| * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2, or (at your option) any |
| * later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, see <http://www.gnu.org/licenses/>. |
| * |
| * Author: |
| * wwang (wei_wang@realsil.com.cn) |
| * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/blkdev.h> |
| #include <linux/kthread.h> |
| #include <linux/sched.h> |
| #include <linux/kernel.h> |
| |
| #include <scsi/scsi.h> |
| #include <scsi/scsi_cmnd.h> |
| #include <scsi/scsi_device.h> |
| #include <linux/cdrom.h> |
| |
| #include <linux/usb.h> |
| #include <linux/slab.h> |
| #include <linux/usb_usual.h> |
| |
| #include "usb.h" |
| #include "transport.h" |
| #include "protocol.h" |
| #include "debug.h" |
| #include "scsiglue.h" |
| |
| #define DRV_NAME "ums-realtek" |
| |
| MODULE_DESCRIPTION("Driver for Realtek USB Card Reader"); |
| MODULE_AUTHOR("wwang <wei_wang@realsil.com.cn>"); |
| MODULE_LICENSE("GPL"); |
| |
| static int auto_delink_en = 1; |
| module_param(auto_delink_en, int, S_IRUGO | S_IWUSR); |
| MODULE_PARM_DESC(auto_delink_en, "enable auto delink"); |
| |
| #ifdef CONFIG_REALTEK_AUTOPM |
| static int ss_en = 1; |
| module_param(ss_en, int, S_IRUGO | S_IWUSR); |
| MODULE_PARM_DESC(ss_en, "enable selective suspend"); |
| |
| static int ss_delay = 50; |
| module_param(ss_delay, int, S_IRUGO | S_IWUSR); |
| MODULE_PARM_DESC(ss_delay, |
| "seconds to delay before entering selective suspend"); |
| |
| enum RTS51X_STAT { |
| RTS51X_STAT_INIT, |
| RTS51X_STAT_IDLE, |
| RTS51X_STAT_RUN, |
| RTS51X_STAT_SS |
| }; |
| |
| #define POLLING_INTERVAL 50 |
| |
| #define rts51x_set_stat(chip, stat) \ |
| ((chip)->state = (enum RTS51X_STAT)(stat)) |
| #define rts51x_get_stat(chip) ((chip)->state) |
| |
| #define SET_LUN_READY(chip, lun) ((chip)->lun_ready |= ((u8)1 << (lun))) |
| #define CLR_LUN_READY(chip, lun) ((chip)->lun_ready &= ~((u8)1 << (lun))) |
| #define TST_LUN_READY(chip, lun) ((chip)->lun_ready & ((u8)1 << (lun))) |
| |
| #endif |
| |
| struct rts51x_status { |
| u16 vid; |
| u16 pid; |
| u8 cur_lun; |
| u8 card_type; |
| u8 total_lun; |
| u16 fw_ver; |
| u8 phy_exist; |
| u8 multi_flag; |
| u8 multi_card; |
| u8 log_exist; |
| union { |
| u8 detailed_type1; |
| u8 detailed_type2; |
| } detailed_type; |
| u8 function[2]; |
| }; |
| |
| struct rts51x_chip { |
| u16 vendor_id; |
| u16 product_id; |
| char max_lun; |
| |
| struct rts51x_status *status; |
| int status_len; |
| |
| u32 flag; |
| struct us_data *us; |
| |
| #ifdef CONFIG_REALTEK_AUTOPM |
| struct timer_list rts51x_suspend_timer; |
| unsigned long timer_expires; |
| int pwr_state; |
| u8 lun_ready; |
| enum RTS51X_STAT state; |
| int support_auto_delink; |
| #endif |
| /* used to back up the protocol chosen in probe1 phase */ |
| proto_cmnd proto_handler_backup; |
| }; |
| |
| /* flag definition */ |
| #define FLIDX_AUTO_DELINK 0x01 |
| |
| #define SCSI_LUN(srb) ((srb)->device->lun) |
| |
| /* Bit Operation */ |
| #define SET_BIT(data, idx) ((data) |= 1 << (idx)) |
| #define CLR_BIT(data, idx) ((data) &= ~(1 << (idx))) |
| #define CHK_BIT(data, idx) ((data) & (1 << (idx))) |
| |
| #define SET_AUTO_DELINK(chip) ((chip)->flag |= FLIDX_AUTO_DELINK) |
| #define CLR_AUTO_DELINK(chip) ((chip)->flag &= ~FLIDX_AUTO_DELINK) |
| #define CHK_AUTO_DELINK(chip) ((chip)->flag & FLIDX_AUTO_DELINK) |
| |
| #define RTS51X_GET_VID(chip) ((chip)->vendor_id) |
| #define RTS51X_GET_PID(chip) ((chip)->product_id) |
| |
| #define VENDOR_ID(chip) ((chip)->status[0].vid) |
| #define PRODUCT_ID(chip) ((chip)->status[0].pid) |
| #define FW_VERSION(chip) ((chip)->status[0].fw_ver) |
| #define STATUS_LEN(chip) ((chip)->status_len) |
| |
| #define STATUS_SUCCESS 0 |
| #define STATUS_FAIL 1 |
| |
| /* Check card reader function */ |
| #define SUPPORT_DETAILED_TYPE1(chip) \ |
| CHK_BIT((chip)->status[0].function[0], 1) |
| #define SUPPORT_OT(chip) \ |
| CHK_BIT((chip)->status[0].function[0], 2) |
| #define SUPPORT_OC(chip) \ |
| CHK_BIT((chip)->status[0].function[0], 3) |
| #define SUPPORT_AUTO_DELINK(chip) \ |
| CHK_BIT((chip)->status[0].function[0], 4) |
| #define SUPPORT_SDIO(chip) \ |
| CHK_BIT((chip)->status[0].function[1], 0) |
| #define SUPPORT_DETAILED_TYPE2(chip) \ |
| CHK_BIT((chip)->status[0].function[1], 1) |
| |
| #define CHECK_PID(chip, pid) (RTS51X_GET_PID(chip) == (pid)) |
| #define CHECK_FW_VER(chip, fw_ver) (FW_VERSION(chip) == (fw_ver)) |
| #define CHECK_ID(chip, pid, fw_ver) \ |
| (CHECK_PID((chip), (pid)) && CHECK_FW_VER((chip), (fw_ver))) |
| |
| static int init_realtek_cr(struct us_data *us); |
| |
| /* |
| * The table of devices |
| */ |
| #define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ |
| vendorName, productName, useProtocol, useTransport, \ |
| initFunction, flags) \ |
| {\ |
| USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ |
| .driver_info = (flags) \ |
| } |
| |
| static const struct usb_device_id realtek_cr_ids[] = { |
| # include "unusual_realtek.h" |
| {} /* Terminating entry */ |
| }; |
| |
| MODULE_DEVICE_TABLE(usb, realtek_cr_ids); |
| |
| #undef UNUSUAL_DEV |
| |
| /* |
| * The flags table |
| */ |
| #define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ |
| vendor_name, product_name, use_protocol, use_transport, \ |
| init_function, Flags) \ |
| { \ |
| .vendorName = vendor_name, \ |
| .productName = product_name, \ |
| .useProtocol = use_protocol, \ |
| .useTransport = use_transport, \ |
| .initFunction = init_function, \ |
| } |
| |
| static struct us_unusual_dev realtek_cr_unusual_dev_list[] = { |
| # include "unusual_realtek.h" |
| {} /* Terminating entry */ |
| }; |
| |
| #undef UNUSUAL_DEV |
| |
| static int rts51x_bulk_transport(struct us_data *us, u8 lun, |
| u8 *cmd, int cmd_len, u8 *buf, int buf_len, |
| enum dma_data_direction dir, int *act_len) |
| { |
| struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *)us->iobuf; |
| struct bulk_cs_wrap *bcs = (struct bulk_cs_wrap *)us->iobuf; |
| int result; |
| unsigned int residue; |
| unsigned int cswlen; |
| unsigned int cbwlen = US_BULK_CB_WRAP_LEN; |
| |
| /* set up the command wrapper */ |
| bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN); |
| bcb->DataTransferLength = cpu_to_le32(buf_len); |
| bcb->Flags = (dir == DMA_FROM_DEVICE) ? US_BULK_FLAG_IN : 0; |
| bcb->Tag = ++us->tag; |
| bcb->Lun = lun; |
| bcb->Length = cmd_len; |
| |
| /* copy the command payload */ |
| memset(bcb->CDB, 0, sizeof(bcb->CDB)); |
| memcpy(bcb->CDB, cmd, bcb->Length); |
| |
| /* send it to out endpoint */ |
| result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, |
| bcb, cbwlen, NULL); |
| if (result != USB_STOR_XFER_GOOD) |
| return USB_STOR_TRANSPORT_ERROR; |
| |
| /* DATA STAGE */ |
| /* send/receive data payload, if there is any */ |
| |
| if (buf && buf_len) { |
| unsigned int pipe = (dir == DMA_FROM_DEVICE) ? |
| us->recv_bulk_pipe : us->send_bulk_pipe; |
| result = usb_stor_bulk_transfer_buf(us, pipe, |
| buf, buf_len, NULL); |
| if (result == USB_STOR_XFER_ERROR) |
| return USB_STOR_TRANSPORT_ERROR; |
| } |
| |
| /* get CSW for device status */ |
| result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, |
| bcs, US_BULK_CS_WRAP_LEN, &cswlen); |
| if (result != USB_STOR_XFER_GOOD) |
| return USB_STOR_TRANSPORT_ERROR; |
| |
| /* check bulk status */ |
| if (bcs->Signature != cpu_to_le32(US_BULK_CS_SIGN)) { |
| usb_stor_dbg(us, "Signature mismatch: got %08X, expecting %08X\n", |
| le32_to_cpu(bcs->Signature), US_BULK_CS_SIGN); |
| return USB_STOR_TRANSPORT_ERROR; |
| } |
| |
| residue = bcs->Residue; |
| if (bcs->Tag != us->tag) |
| return USB_STOR_TRANSPORT_ERROR; |
| |
| /* |
| * try to compute the actual residue, based on how much data |
| * was really transferred and what the device tells us |
| */ |
| if (residue) |
| residue = residue < buf_len ? residue : buf_len; |
| |
| if (act_len) |
| *act_len = buf_len - residue; |
| |
| /* based on the status code, we report good or bad */ |
| switch (bcs->Status) { |
| case US_BULK_STAT_OK: |
| /* command good -- note that data could be short */ |
| return USB_STOR_TRANSPORT_GOOD; |
| |
| case US_BULK_STAT_FAIL: |
| /* command failed */ |
| return USB_STOR_TRANSPORT_FAILED; |
| |
| case US_BULK_STAT_PHASE: |
| /* |
| * phase error -- note that a transport reset will be |
| * invoked by the invoke_transport() function |
| */ |
| return USB_STOR_TRANSPORT_ERROR; |
| } |
| |
| /* we should never get here, but if we do, we're in trouble */ |
| return USB_STOR_TRANSPORT_ERROR; |
| } |
| |
| static int rts51x_bulk_transport_special(struct us_data *us, u8 lun, |
| u8 *cmd, int cmd_len, u8 *buf, int buf_len, |
| enum dma_data_direction dir, int *act_len) |
| { |
| struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf; |
| struct bulk_cs_wrap *bcs = (struct bulk_cs_wrap *) us->iobuf; |
| int result; |
| unsigned int cswlen; |
| unsigned int cbwlen = US_BULK_CB_WRAP_LEN; |
| |
| /* set up the command wrapper */ |
| bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN); |
| bcb->DataTransferLength = cpu_to_le32(buf_len); |
| bcb->Flags = (dir == DMA_FROM_DEVICE) ? US_BULK_FLAG_IN : 0; |
| bcb->Tag = ++us->tag; |
| bcb->Lun = lun; |
| bcb->Length = cmd_len; |
| |
| /* copy the command payload */ |
| memset(bcb->CDB, 0, sizeof(bcb->CDB)); |
| memcpy(bcb->CDB, cmd, bcb->Length); |
| |
| /* send it to out endpoint */ |
| result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, |
| bcb, cbwlen, NULL); |
| if (result != USB_STOR_XFER_GOOD) |
| return USB_STOR_TRANSPORT_ERROR; |
| |
| /* DATA STAGE */ |
| /* send/receive data payload, if there is any */ |
| |
| if (buf && buf_len) { |
| unsigned int pipe = (dir == DMA_FROM_DEVICE) ? |
| us->recv_bulk_pipe : us->send_bulk_pipe; |
| result = usb_stor_bulk_transfer_buf(us, pipe, |
| buf, buf_len, NULL); |
| if (result == USB_STOR_XFER_ERROR) |
| return USB_STOR_TRANSPORT_ERROR; |
| } |
| |
| /* get CSW for device status */ |
| result = usb_bulk_msg(us->pusb_dev, us->recv_bulk_pipe, bcs, |
| US_BULK_CS_WRAP_LEN, &cswlen, 250); |
| return result; |
| } |
| |
| /* Determine what the maximum LUN supported is */ |
| static int rts51x_get_max_lun(struct us_data *us) |
| { |
| int result; |
| |
| /* issue the command */ |
| us->iobuf[0] = 0; |
| result = usb_stor_control_msg(us, us->recv_ctrl_pipe, |
| US_BULK_GET_MAX_LUN, |
| USB_DIR_IN | USB_TYPE_CLASS | |
| USB_RECIP_INTERFACE, |
| 0, us->ifnum, us->iobuf, 1, 10 * HZ); |
| |
| usb_stor_dbg(us, "GetMaxLUN command result is %d, data is %d\n", |
| result, us->iobuf[0]); |
| |
| /* if we have a successful request, return the result */ |
| if (result > 0) |
| return us->iobuf[0]; |
| |
| return 0; |
| } |
| |
| static int rts51x_read_mem(struct us_data *us, u16 addr, u8 *data, u16 len) |
| { |
| int retval; |
| u8 cmnd[12] = { 0 }; |
| u8 *buf; |
| |
| buf = kmalloc(len, GFP_NOIO); |
| if (buf == NULL) |
| return USB_STOR_TRANSPORT_ERROR; |
| |
| usb_stor_dbg(us, "addr = 0x%x, len = %d\n", addr, len); |
| |
| cmnd[0] = 0xF0; |
| cmnd[1] = 0x0D; |
| cmnd[2] = (u8) (addr >> 8); |
| cmnd[3] = (u8) addr; |
| cmnd[4] = (u8) (len >> 8); |
| cmnd[5] = (u8) len; |
| |
| retval = rts51x_bulk_transport(us, 0, cmnd, 12, |
| buf, len, DMA_FROM_DEVICE, NULL); |
| if (retval != USB_STOR_TRANSPORT_GOOD) { |
| kfree(buf); |
| return -EIO; |
| } |
| |
| memcpy(data, buf, len); |
| kfree(buf); |
| return 0; |
| } |
| |
| static int rts51x_write_mem(struct us_data *us, u16 addr, u8 *data, u16 len) |
| { |
| int retval; |
| u8 cmnd[12] = { 0 }; |
| u8 *buf; |
| |
| buf = kmemdup(data, len, GFP_NOIO); |
| if (buf == NULL) |
| return USB_STOR_TRANSPORT_ERROR; |
| |
| usb_stor_dbg(us, "addr = 0x%x, len = %d\n", addr, len); |
| |
| cmnd[0] = 0xF0; |
| cmnd[1] = 0x0E; |
| cmnd[2] = (u8) (addr >> 8); |
| cmnd[3] = (u8) addr; |
| cmnd[4] = (u8) (len >> 8); |
| cmnd[5] = (u8) len; |
| |
| retval = rts51x_bulk_transport(us, 0, cmnd, 12, |
| buf, len, DMA_TO_DEVICE, NULL); |
| kfree(buf); |
| if (retval != USB_STOR_TRANSPORT_GOOD) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| static int rts51x_read_status(struct us_data *us, |
| u8 lun, u8 *status, int len, int *actlen) |
| { |
| int retval; |
| u8 cmnd[12] = { 0 }; |
| u8 *buf; |
| |
| buf = kmalloc(len, GFP_NOIO); |
| if (buf == NULL) |
| return USB_STOR_TRANSPORT_ERROR; |
| |
| usb_stor_dbg(us, "lun = %d\n", lun); |
| |
| cmnd[0] = 0xF0; |
| cmnd[1] = 0x09; |
| |
| retval = rts51x_bulk_transport(us, lun, cmnd, 12, |
| buf, len, DMA_FROM_DEVICE, actlen); |
| if (retval != USB_STOR_TRANSPORT_GOOD) { |
| kfree(buf); |
| return -EIO; |
| } |
| |
| memcpy(status, buf, len); |
| kfree(buf); |
| return 0; |
| } |
| |
| static int rts51x_check_status(struct us_data *us, u8 lun) |
| { |
| struct rts51x_chip *chip = (struct rts51x_chip *)(us->extra); |
| int retval; |
| u8 buf[16]; |
| |
| retval = rts51x_read_status(us, lun, buf, 16, &(chip->status_len)); |
| if (retval != STATUS_SUCCESS) |
| return -EIO; |
| |
| usb_stor_dbg(us, "chip->status_len = %d\n", chip->status_len); |
| |
| chip->status[lun].vid = ((u16) buf[0] << 8) | buf[1]; |
| chip->status[lun].pid = ((u16) buf[2] << 8) | buf[3]; |
| chip->status[lun].cur_lun = buf[4]; |
| chip->status[lun].card_type = buf[5]; |
| chip->status[lun].total_lun = buf[6]; |
| chip->status[lun].fw_ver = ((u16) buf[7] << 8) | buf[8]; |
| chip->status[lun].phy_exist = buf[9]; |
| chip->status[lun].multi_flag = buf[10]; |
| chip->status[lun].multi_card = buf[11]; |
| chip->status[lun].log_exist = buf[12]; |
| if (chip->status_len == 16) { |
| chip->status[lun].detailed_type.detailed_type1 = buf[13]; |
| chip->status[lun].function[0] = buf[14]; |
| chip->status[lun].function[1] = buf[15]; |
| } |
| |
| return 0; |
| } |
| |
| static int enable_oscillator(struct us_data *us) |
| { |
| int retval; |
| u8 value; |
| |
| retval = rts51x_read_mem(us, 0xFE77, &value, 1); |
| if (retval < 0) |
| return -EIO; |
| |
| value |= 0x04; |
| retval = rts51x_write_mem(us, 0xFE77, &value, 1); |
| if (retval < 0) |
| return -EIO; |
| |
| retval = rts51x_read_mem(us, 0xFE77, &value, 1); |
| if (retval < 0) |
| return -EIO; |
| |
| if (!(value & 0x04)) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| static int __do_config_autodelink(struct us_data *us, u8 *data, u16 len) |
| { |
| int retval; |
| u8 cmnd[12] = {0}; |
| u8 *buf; |
| |
| usb_stor_dbg(us, "addr = 0xfe47, len = %d\n", len); |
| |
| buf = kmemdup(data, len, GFP_NOIO); |
| if (!buf) |
| return USB_STOR_TRANSPORT_ERROR; |
| |
| cmnd[0] = 0xF0; |
| cmnd[1] = 0x0E; |
| cmnd[2] = 0xfe; |
| cmnd[3] = 0x47; |
| cmnd[4] = (u8)(len >> 8); |
| cmnd[5] = (u8)len; |
| |
| retval = rts51x_bulk_transport_special(us, 0, cmnd, 12, buf, len, DMA_TO_DEVICE, NULL); |
| kfree(buf); |
| if (retval != USB_STOR_TRANSPORT_GOOD) { |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int do_config_autodelink(struct us_data *us, int enable, int force) |
| { |
| int retval; |
| u8 value; |
| |
| retval = rts51x_read_mem(us, 0xFE47, &value, 1); |
| if (retval < 0) |
| return -EIO; |
| |
| if (enable) { |
| if (force) |
| value |= 0x03; |
| else |
| value |= 0x01; |
| } else { |
| value &= ~0x03; |
| } |
| |
| usb_stor_dbg(us, "set 0xfe47 to 0x%x\n", value); |
| |
| /* retval = rts51x_write_mem(us, 0xFE47, &value, 1); */ |
| retval = __do_config_autodelink(us, &value, 1); |
| if (retval < 0) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| static int config_autodelink_after_power_on(struct us_data *us) |
| { |
| struct rts51x_chip *chip = (struct rts51x_chip *)(us->extra); |
| int retval; |
| u8 value; |
| |
| if (!CHK_AUTO_DELINK(chip)) |
| return 0; |
| |
| retval = rts51x_read_mem(us, 0xFE47, &value, 1); |
| if (retval < 0) |
| return -EIO; |
| |
| if (auto_delink_en) { |
| CLR_BIT(value, 0); |
| CLR_BIT(value, 1); |
| SET_BIT(value, 2); |
| |
| if (CHECK_ID(chip, 0x0138, 0x3882)) |
| CLR_BIT(value, 2); |
| |
| SET_BIT(value, 7); |
| |
| /* retval = rts51x_write_mem(us, 0xFE47, &value, 1); */ |
| retval = __do_config_autodelink(us, &value, 1); |
| if (retval < 0) |
| return -EIO; |
| |
| retval = enable_oscillator(us); |
| if (retval == 0) |
| (void)do_config_autodelink(us, 1, 0); |
| } else { |
| /* Autodelink controlled by firmware */ |
| |
| SET_BIT(value, 2); |
| |
| if (CHECK_ID(chip, 0x0138, 0x3882)) |
| CLR_BIT(value, 2); |
| |
| if (CHECK_ID(chip, 0x0159, 0x5889) || |
| CHECK_ID(chip, 0x0138, 0x3880)) { |
| CLR_BIT(value, 0); |
| CLR_BIT(value, 7); |
| } |
| |
| /* retval = rts51x_write_mem(us, 0xFE47, &value, 1); */ |
| retval = __do_config_autodelink(us, &value, 1); |
| if (retval < 0) |
| return -EIO; |
| |
| if (CHECK_ID(chip, 0x0159, 0x5888)) { |
| value = 0xFF; |
| retval = rts51x_write_mem(us, 0xFE79, &value, 1); |
| if (retval < 0) |
| return -EIO; |
| |
| value = 0x01; |
| retval = rts51x_write_mem(us, 0x48, &value, 1); |
| if (retval < 0) |
| return -EIO; |
| } |
| } |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int config_autodelink_before_power_down(struct us_data *us) |
| { |
| struct rts51x_chip *chip = (struct rts51x_chip *)(us->extra); |
| int retval; |
| u8 value; |
| |
| if (!CHK_AUTO_DELINK(chip)) |
| return 0; |
| |
| if (auto_delink_en) { |
| retval = rts51x_read_mem(us, 0xFE77, &value, 1); |
| if (retval < 0) |
| return -EIO; |
| |
| SET_BIT(value, 2); |
| retval = rts51x_write_mem(us, 0xFE77, &value, 1); |
| if (retval < 0) |
| return -EIO; |
| |
| if (CHECK_ID(chip, 0x0159, 0x5888)) { |
| value = 0x01; |
| retval = rts51x_write_mem(us, 0x48, &value, 1); |
| if (retval < 0) |
| return -EIO; |
| } |
| |
| retval = rts51x_read_mem(us, 0xFE47, &value, 1); |
| if (retval < 0) |
| return -EIO; |
| |
| SET_BIT(value, 0); |
| if (CHECK_ID(chip, 0x0138, 0x3882)) |
| SET_BIT(value, 2); |
| retval = rts51x_write_mem(us, 0xFE77, &value, 1); |
| if (retval < 0) |
| return -EIO; |
| } else { |
| if (CHECK_ID(chip, 0x0159, 0x5889) || |
| CHECK_ID(chip, 0x0138, 0x3880) || |
| CHECK_ID(chip, 0x0138, 0x3882)) { |
| retval = rts51x_read_mem(us, 0xFE47, &value, 1); |
| if (retval < 0) |
| return -EIO; |
| |
| if (CHECK_ID(chip, 0x0159, 0x5889) || |
| CHECK_ID(chip, 0x0138, 0x3880)) { |
| SET_BIT(value, 0); |
| SET_BIT(value, 7); |
| } |
| |
| if (CHECK_ID(chip, 0x0138, 0x3882)) |
| SET_BIT(value, 2); |
| |
| /* retval = rts51x_write_mem(us, 0xFE47, &value, 1); */ |
| retval = __do_config_autodelink(us, &value, 1); |
| if (retval < 0) |
| return -EIO; |
| } |
| |
| if (CHECK_ID(chip, 0x0159, 0x5888)) { |
| value = 0x01; |
| retval = rts51x_write_mem(us, 0x48, &value, 1); |
| if (retval < 0) |
| return -EIO; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void fw5895_init(struct us_data *us) |
| { |
| struct rts51x_chip *chip = (struct rts51x_chip *)(us->extra); |
| int retval; |
| u8 val; |
| |
| if ((PRODUCT_ID(chip) != 0x0158) || (FW_VERSION(chip) != 0x5895)) { |
| usb_stor_dbg(us, "Not the specified device, return immediately!\n"); |
| } else { |
| retval = rts51x_read_mem(us, 0xFD6F, &val, 1); |
| if (retval == STATUS_SUCCESS && (val & 0x1F) == 0) { |
| val = 0x1F; |
| retval = rts51x_write_mem(us, 0xFD70, &val, 1); |
| if (retval != STATUS_SUCCESS) |
| usb_stor_dbg(us, "Write memory fail\n"); |
| } else { |
| usb_stor_dbg(us, "Read memory fail, OR (val & 0x1F) != 0\n"); |
| } |
| } |
| } |
| #endif |
| |
| #ifdef CONFIG_REALTEK_AUTOPM |
| static void fw5895_set_mmc_wp(struct us_data *us) |
| { |
| struct rts51x_chip *chip = (struct rts51x_chip *)(us->extra); |
| int retval; |
| u8 buf[13]; |
| |
| if ((PRODUCT_ID(chip) != 0x0158) || (FW_VERSION(chip) != 0x5895)) { |
| usb_stor_dbg(us, "Not the specified device, return immediately!\n"); |
| } else { |
| retval = rts51x_read_mem(us, 0xFD6F, buf, 1); |
| if (retval == STATUS_SUCCESS && (buf[0] & 0x24) == 0x24) { |
| /* SD Exist and SD WP */ |
| retval = rts51x_read_mem(us, 0xD04E, buf, 1); |
| if (retval == STATUS_SUCCESS) { |
| buf[0] |= 0x04; |
| retval = rts51x_write_mem(us, 0xFD70, buf, 1); |
| if (retval != STATUS_SUCCESS) |
| usb_stor_dbg(us, "Write memory fail\n"); |
| } else { |
| usb_stor_dbg(us, "Read memory fail\n"); |
| } |
| } else { |
| usb_stor_dbg(us, "Read memory fail, OR (buf[0]&0x24)!=0x24\n"); |
| } |
| } |
| } |
| |
| static void rts51x_modi_suspend_timer(struct rts51x_chip *chip) |
| { |
| struct us_data *us = chip->us; |
| |
| usb_stor_dbg(us, "state:%d\n", rts51x_get_stat(chip)); |
| |
| chip->timer_expires = jiffies + msecs_to_jiffies(1000*ss_delay); |
| mod_timer(&chip->rts51x_suspend_timer, chip->timer_expires); |
| } |
| |
| static void rts51x_suspend_timer_fn(unsigned long data) |
| { |
| struct rts51x_chip *chip = (struct rts51x_chip *)data; |
| struct us_data *us = chip->us; |
| |
| switch (rts51x_get_stat(chip)) { |
| case RTS51X_STAT_INIT: |
| case RTS51X_STAT_RUN: |
| rts51x_modi_suspend_timer(chip); |
| break; |
| case RTS51X_STAT_IDLE: |
| case RTS51X_STAT_SS: |
| usb_stor_dbg(us, "RTS51X_STAT_SS, intf->pm_usage_cnt:%d, power.usage:%d\n", |
| atomic_read(&us->pusb_intf->pm_usage_cnt), |
| atomic_read(&us->pusb_intf->dev.power.usage_count)); |
| |
| if (atomic_read(&us->pusb_intf->pm_usage_cnt) > 0) { |
| usb_stor_dbg(us, "Ready to enter SS state\n"); |
| rts51x_set_stat(chip, RTS51X_STAT_SS); |
| /* ignore mass storage interface's children */ |
| pm_suspend_ignore_children(&us->pusb_intf->dev, true); |
| usb_autopm_put_interface_async(us->pusb_intf); |
| usb_stor_dbg(us, "RTS51X_STAT_SS 01, intf->pm_usage_cnt:%d, power.usage:%d\n", |
| atomic_read(&us->pusb_intf->pm_usage_cnt), |
| atomic_read(&us->pusb_intf->dev.power.usage_count)); |
| } |
| break; |
| default: |
| usb_stor_dbg(us, "Unknown state !!!\n"); |
| break; |
| } |
| } |
| |
| static inline int working_scsi(struct scsi_cmnd *srb) |
| { |
| if ((srb->cmnd[0] == TEST_UNIT_READY) || |
| (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL)) { |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| static void rts51x_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) |
| { |
| struct rts51x_chip *chip = (struct rts51x_chip *)(us->extra); |
| static int card_first_show = 1; |
| static u8 media_not_present[] = { 0x70, 0, 0x02, 0, 0, 0, 0, |
| 10, 0, 0, 0, 0, 0x3A, 0, 0, 0, 0, 0 |
| }; |
| static u8 invalid_cmd_field[] = { 0x70, 0, 0x05, 0, 0, 0, 0, |
| 10, 0, 0, 0, 0, 0x24, 0, 0, 0, 0, 0 |
| }; |
| int ret; |
| |
| if (working_scsi(srb)) { |
| usb_stor_dbg(us, "working scsi, intf->pm_usage_cnt:%d, power.usage:%d\n", |
| atomic_read(&us->pusb_intf->pm_usage_cnt), |
| atomic_read(&us->pusb_intf->dev.power.usage_count)); |
| |
| if (atomic_read(&us->pusb_intf->pm_usage_cnt) <= 0) { |
| ret = usb_autopm_get_interface(us->pusb_intf); |
| usb_stor_dbg(us, "working scsi, ret=%d\n", ret); |
| } |
| if (rts51x_get_stat(chip) != RTS51X_STAT_RUN) |
| rts51x_set_stat(chip, RTS51X_STAT_RUN); |
| chip->proto_handler_backup(srb, us); |
| } else { |
| if (rts51x_get_stat(chip) == RTS51X_STAT_SS) { |
| usb_stor_dbg(us, "NOT working scsi\n"); |
| if ((srb->cmnd[0] == TEST_UNIT_READY) && |
| (chip->pwr_state == US_SUSPEND)) { |
| if (TST_LUN_READY(chip, srb->device->lun)) { |
| srb->result = SAM_STAT_GOOD; |
| } else { |
| srb->result = SAM_STAT_CHECK_CONDITION; |
| memcpy(srb->sense_buffer, |
| media_not_present, |
| US_SENSE_SIZE); |
| } |
| usb_stor_dbg(us, "TEST_UNIT_READY\n"); |
| goto out; |
| } |
| if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) { |
| int prevent = srb->cmnd[4] & 0x1; |
| if (prevent) { |
| srb->result = SAM_STAT_CHECK_CONDITION; |
| memcpy(srb->sense_buffer, |
| invalid_cmd_field, |
| US_SENSE_SIZE); |
| } else { |
| srb->result = SAM_STAT_GOOD; |
| } |
| usb_stor_dbg(us, "ALLOW_MEDIUM_REMOVAL\n"); |
| goto out; |
| } |
| } else { |
| usb_stor_dbg(us, "NOT working scsi, not SS\n"); |
| chip->proto_handler_backup(srb, us); |
| /* Check whether card is plugged in */ |
| if (srb->cmnd[0] == TEST_UNIT_READY) { |
| if (srb->result == SAM_STAT_GOOD) { |
| SET_LUN_READY(chip, srb->device->lun); |
| if (card_first_show) { |
| card_first_show = 0; |
| fw5895_set_mmc_wp(us); |
| } |
| } else { |
| CLR_LUN_READY(chip, srb->device->lun); |
| card_first_show = 1; |
| } |
| } |
| if (rts51x_get_stat(chip) != RTS51X_STAT_IDLE) |
| rts51x_set_stat(chip, RTS51X_STAT_IDLE); |
| } |
| } |
| out: |
| usb_stor_dbg(us, "state:%d\n", rts51x_get_stat(chip)); |
| if (rts51x_get_stat(chip) == RTS51X_STAT_RUN) |
| rts51x_modi_suspend_timer(chip); |
| } |
| |
| static int realtek_cr_autosuspend_setup(struct us_data *us) |
| { |
| struct rts51x_chip *chip; |
| struct rts51x_status *status = NULL; |
| u8 buf[16]; |
| int retval; |
| |
| chip = (struct rts51x_chip *)us->extra; |
| chip->support_auto_delink = 0; |
| chip->pwr_state = US_RESUME; |
| chip->lun_ready = 0; |
| rts51x_set_stat(chip, RTS51X_STAT_INIT); |
| |
| retval = rts51x_read_status(us, 0, buf, 16, &(chip->status_len)); |
| if (retval != STATUS_SUCCESS) { |
| usb_stor_dbg(us, "Read status fail\n"); |
| return -EIO; |
| } |
| status = chip->status; |
| status->vid = ((u16) buf[0] << 8) | buf[1]; |
| status->pid = ((u16) buf[2] << 8) | buf[3]; |
| status->cur_lun = buf[4]; |
| status->card_type = buf[5]; |
| status->total_lun = buf[6]; |
| status->fw_ver = ((u16) buf[7] << 8) | buf[8]; |
| status->phy_exist = buf[9]; |
| status->multi_flag = buf[10]; |
| status->multi_card = buf[11]; |
| status->log_exist = buf[12]; |
| if (chip->status_len == 16) { |
| status->detailed_type.detailed_type1 = buf[13]; |
| status->function[0] = buf[14]; |
| status->function[1] = buf[15]; |
| } |
| |
| /* back up the proto_handler in us->extra */ |
| chip = (struct rts51x_chip *)(us->extra); |
| chip->proto_handler_backup = us->proto_handler; |
| /* Set the autosuspend_delay to 0 */ |
| pm_runtime_set_autosuspend_delay(&us->pusb_dev->dev, 0); |
| /* override us->proto_handler setted in get_protocol() */ |
| us->proto_handler = rts51x_invoke_transport; |
| |
| chip->timer_expires = 0; |
| setup_timer(&chip->rts51x_suspend_timer, rts51x_suspend_timer_fn, |
| (unsigned long)chip); |
| fw5895_init(us); |
| |
| /* enable autosuspend function of the usb device */ |
| usb_enable_autosuspend(us->pusb_dev); |
| |
| return 0; |
| } |
| #endif |
| |
| static void realtek_cr_destructor(void *extra) |
| { |
| struct rts51x_chip *chip = extra; |
| |
| if (!chip) |
| return; |
| |
| #ifdef CONFIG_REALTEK_AUTOPM |
| if (ss_en) { |
| del_timer(&chip->rts51x_suspend_timer); |
| chip->timer_expires = 0; |
| } |
| #endif |
| kfree(chip->status); |
| } |
| |
| #ifdef CONFIG_PM |
| static int realtek_cr_suspend(struct usb_interface *iface, pm_message_t message) |
| { |
| struct us_data *us = usb_get_intfdata(iface); |
| |
| /* wait until no command is running */ |
| mutex_lock(&us->dev_mutex); |
| |
| config_autodelink_before_power_down(us); |
| |
| mutex_unlock(&us->dev_mutex); |
| |
| return 0; |
| } |
| |
| static int realtek_cr_resume(struct usb_interface *iface) |
| { |
| struct us_data *us = usb_get_intfdata(iface); |
| |
| fw5895_init(us); |
| config_autodelink_after_power_on(us); |
| |
| return 0; |
| } |
| #else |
| #define realtek_cr_suspend NULL |
| #define realtek_cr_resume NULL |
| #endif |
| |
| static int init_realtek_cr(struct us_data *us) |
| { |
| struct rts51x_chip *chip; |
| int size, i, retval; |
| |
| chip = kzalloc(sizeof(struct rts51x_chip), GFP_KERNEL); |
| if (!chip) |
| return -ENOMEM; |
| |
| us->extra = chip; |
| us->extra_destructor = realtek_cr_destructor; |
| us->max_lun = chip->max_lun = rts51x_get_max_lun(us); |
| chip->us = us; |
| |
| usb_stor_dbg(us, "chip->max_lun = %d\n", chip->max_lun); |
| |
| size = (chip->max_lun + 1) * sizeof(struct rts51x_status); |
| chip->status = kzalloc(size, GFP_KERNEL); |
| if (!chip->status) |
| goto INIT_FAIL; |
| |
| for (i = 0; i <= (int)(chip->max_lun); i++) { |
| retval = rts51x_check_status(us, (u8) i); |
| if (retval < 0) |
| goto INIT_FAIL; |
| } |
| |
| if (CHECK_FW_VER(chip, 0x5888) || CHECK_FW_VER(chip, 0x5889) || |
| CHECK_FW_VER(chip, 0x5901)) |
| SET_AUTO_DELINK(chip); |
| if (STATUS_LEN(chip) == 16) { |
| if (SUPPORT_AUTO_DELINK(chip)) |
| SET_AUTO_DELINK(chip); |
| } |
| #ifdef CONFIG_REALTEK_AUTOPM |
| if (ss_en) |
| realtek_cr_autosuspend_setup(us); |
| #endif |
| |
| usb_stor_dbg(us, "chip->flag = 0x%x\n", chip->flag); |
| |
| (void)config_autodelink_after_power_on(us); |
| |
| return 0; |
| |
| INIT_FAIL: |
| if (us->extra) { |
| kfree(chip->status); |
| kfree(us->extra); |
| us->extra = NULL; |
| } |
| |
| return -EIO; |
| } |
| |
| static struct scsi_host_template realtek_cr_host_template; |
| |
| static int realtek_cr_probe(struct usb_interface *intf, |
| const struct usb_device_id *id) |
| { |
| struct us_data *us; |
| int result; |
| |
| dev_dbg(&intf->dev, "Probe Realtek Card Reader!\n"); |
| |
| result = usb_stor_probe1(&us, intf, id, |
| (id - realtek_cr_ids) + |
| realtek_cr_unusual_dev_list, |
| &realtek_cr_host_template); |
| if (result) |
| return result; |
| |
| result = usb_stor_probe2(us); |
| |
| return result; |
| } |
| |
| static struct usb_driver realtek_cr_driver = { |
| .name = DRV_NAME, |
| .probe = realtek_cr_probe, |
| .disconnect = usb_stor_disconnect, |
| /* .suspend = usb_stor_suspend, */ |
| /* .resume = usb_stor_resume, */ |
| .reset_resume = usb_stor_reset_resume, |
| .suspend = realtek_cr_suspend, |
| .resume = realtek_cr_resume, |
| .pre_reset = usb_stor_pre_reset, |
| .post_reset = usb_stor_post_reset, |
| .id_table = realtek_cr_ids, |
| .soft_unbind = 1, |
| .supports_autosuspend = 1, |
| .no_dynamic_id = 1, |
| }; |
| |
| module_usb_stor_driver(realtek_cr_driver, realtek_cr_host_template, DRV_NAME); |