| * HTS221 STM humidity + temperature sensor |
| |
| Required properties: |
| - compatible: should be "st,hts221" |
| - reg: i2c address of the sensor / spi cs line |
| |
| Optional properties: |
| - interrupt-parent: should be the phandle for the interrupt controller |
| - interrupts: interrupt mapping for IRQ. It should be configured with |
| flags IRQ_TYPE_LEVEL_HIGH or IRQ_TYPE_EDGE_RISING. |
| |
| Refer to interrupt-controller/interrupts.txt for generic interrupt |
| client node bindings. |
| |
| Example: |
| |
| hts221@5f { |
| compatible = "st,hts221"; |
| reg = <0x5f>; |
| interrupt-parent = <&gpio0>; |
| interrupts = <0 IRQ_TYPE_EDGE_RISING>; |
| }; |
