| /* | |
| * Broadcom specific AMBA | |
| * PCI Core | |
| * | |
| * Copyright 2005, 2011, Broadcom Corporation | |
| * Copyright 2006, 2007, Michael Buesch <m@bues.ch> | |
| * Copyright 2011, 2012, Hauke Mehrtens <hauke@hauke-m.de> | |
| * | |
| * Licensed under the GNU/GPL. See COPYING for details. | |
| */ | |
| #include "bcma_private.h" | |
| #include <linux/export.h> | |
| #include <linux/bcma/bcma.h> | |
| /************************************************** | |
| * R/W ops. | |
| **************************************************/ | |
| u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address) | |
| { | |
| pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address); | |
| pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR); | |
| return pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_DATA); | |
| } | |
| static void bcma_pcie_write(struct bcma_drv_pci *pc, u32 address, u32 data) | |
| { | |
| pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address); | |
| pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR); | |
| pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_DATA, data); | |
| } | |
| static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u16 phy) | |
| { | |
| u32 v; | |
| int i; | |
| v = BCMA_CORE_PCI_MDIODATA_START; | |
| v |= BCMA_CORE_PCI_MDIODATA_WRITE; | |
| v |= (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << | |
| BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); | |
| v |= (BCMA_CORE_PCI_MDIODATA_BLK_ADDR << | |
| BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); | |
| v |= BCMA_CORE_PCI_MDIODATA_TA; | |
| v |= (phy << 4); | |
| pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); | |
| udelay(10); | |
| for (i = 0; i < 200; i++) { | |
| v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); | |
| if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) | |
| break; | |
| usleep_range(1000, 2000); | |
| } | |
| } | |
| static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u16 device, u8 address) | |
| { | |
| int max_retries = 10; | |
| u16 ret = 0; | |
| u32 v; | |
| int i; | |
| /* enable mdio access to SERDES */ | |
| v = BCMA_CORE_PCI_MDIOCTL_PREAM_EN; | |
| v |= BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL; | |
| pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, v); | |
| if (pc->core->id.rev >= 10) { | |
| max_retries = 200; | |
| bcma_pcie_mdio_set_phy(pc, device); | |
| v = (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << | |
| BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); | |
| v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); | |
| } else { | |
| v = (device << BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD); | |
| v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD); | |
| } | |
| v = BCMA_CORE_PCI_MDIODATA_START; | |
| v |= BCMA_CORE_PCI_MDIODATA_READ; | |
| v |= BCMA_CORE_PCI_MDIODATA_TA; | |
| pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); | |
| /* Wait for the device to complete the transaction */ | |
| udelay(10); | |
| for (i = 0; i < max_retries; i++) { | |
| v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); | |
| if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) { | |
| udelay(10); | |
| ret = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_DATA); | |
| break; | |
| } | |
| usleep_range(1000, 2000); | |
| } | |
| pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); | |
| return ret; | |
| } | |
| static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u16 device, | |
| u8 address, u16 data) | |
| { | |
| int max_retries = 10; | |
| u32 v; | |
| int i; | |
| /* enable mdio access to SERDES */ | |
| v = BCMA_CORE_PCI_MDIOCTL_PREAM_EN; | |
| v |= BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL; | |
| pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, v); | |
| if (pc->core->id.rev >= 10) { | |
| max_retries = 200; | |
| bcma_pcie_mdio_set_phy(pc, device); | |
| v = (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << | |
| BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); | |
| v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); | |
| } else { | |
| v = (device << BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD); | |
| v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD); | |
| } | |
| v = BCMA_CORE_PCI_MDIODATA_START; | |
| v |= BCMA_CORE_PCI_MDIODATA_WRITE; | |
| v |= BCMA_CORE_PCI_MDIODATA_TA; | |
| v |= data; | |
| pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); | |
| /* Wait for the device to complete the transaction */ | |
| udelay(10); | |
| for (i = 0; i < max_retries; i++) { | |
| v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); | |
| if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) | |
| break; | |
| usleep_range(1000, 2000); | |
| } | |
| pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); | |
| } | |
| static u16 bcma_pcie_mdio_writeread(struct bcma_drv_pci *pc, u16 device, | |
| u8 address, u16 data) | |
| { | |
| bcma_pcie_mdio_write(pc, device, address, data); | |
| return bcma_pcie_mdio_read(pc, device, address); | |
| } | |
| /************************************************** | |
| * Early init. | |
| **************************************************/ | |
| static void bcma_core_pci_fixcfg(struct bcma_drv_pci *pc) | |
| { | |
| struct bcma_device *core = pc->core; | |
| u16 val16, core_index; | |
| uint regoff; | |
| regoff = BCMA_CORE_PCI_SPROM(BCMA_CORE_PCI_SPROM_PI_OFFSET); | |
| core_index = (u16)core->core_index; | |
| val16 = pcicore_read16(pc, regoff); | |
| if (((val16 & BCMA_CORE_PCI_SPROM_PI_MASK) >> BCMA_CORE_PCI_SPROM_PI_SHIFT) | |
| != core_index) { | |
| val16 = (core_index << BCMA_CORE_PCI_SPROM_PI_SHIFT) | | |
| (val16 & ~BCMA_CORE_PCI_SPROM_PI_MASK); | |
| pcicore_write16(pc, regoff, val16); | |
| } | |
| } | |
| /* | |
| * Apply some early fixes required before accessing SPROM. | |
| * See also si_pci_fixcfg. | |
| */ | |
| void bcma_core_pci_early_init(struct bcma_drv_pci *pc) | |
| { | |
| if (pc->early_setup_done) | |
| return; | |
| pc->hostmode = bcma_core_pci_is_in_hostmode(pc); | |
| if (pc->hostmode) | |
| goto out; | |
| bcma_core_pci_fixcfg(pc); | |
| out: | |
| pc->early_setup_done = true; | |
| } | |
| /************************************************** | |
| * Workarounds. | |
| **************************************************/ | |
| static u8 bcma_pcicore_polarity_workaround(struct bcma_drv_pci *pc) | |
| { | |
| u32 tmp; | |
| tmp = bcma_pcie_read(pc, BCMA_CORE_PCI_PLP_STATUSREG); | |
| if (tmp & BCMA_CORE_PCI_PLP_POLARITYINV_STAT) | |
| return BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE | | |
| BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY; | |
| else | |
| return BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE; | |
| } | |
| static void bcma_pcicore_serdes_workaround(struct bcma_drv_pci *pc) | |
| { | |
| u16 tmp; | |
| bcma_pcie_mdio_write(pc, BCMA_CORE_PCI_MDIODATA_DEV_RX, | |
| BCMA_CORE_PCI_SERDES_RX_CTRL, | |
| bcma_pcicore_polarity_workaround(pc)); | |
| tmp = bcma_pcie_mdio_read(pc, BCMA_CORE_PCI_MDIODATA_DEV_PLL, | |
| BCMA_CORE_PCI_SERDES_PLL_CTRL); | |
| if (tmp & BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN) | |
| bcma_pcie_mdio_write(pc, BCMA_CORE_PCI_MDIODATA_DEV_PLL, | |
| BCMA_CORE_PCI_SERDES_PLL_CTRL, | |
| tmp & ~BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN); | |
| } | |
| /* Fix MISC config to allow coming out of L2/L3-Ready state w/o PRST */ | |
| /* Needs to happen when coming out of 'standby'/'hibernate' */ | |
| static void bcma_core_pci_config_fixup(struct bcma_drv_pci *pc) | |
| { | |
| u16 val16; | |
| uint regoff; | |
| regoff = BCMA_CORE_PCI_SPROM(BCMA_CORE_PCI_SPROM_MISC_CONFIG); | |
| val16 = pcicore_read16(pc, regoff); | |
| if (!(val16 & BCMA_CORE_PCI_SPROM_L23READY_EXIT_NOPERST)) { | |
| val16 |= BCMA_CORE_PCI_SPROM_L23READY_EXIT_NOPERST; | |
| pcicore_write16(pc, regoff, val16); | |
| } | |
| } | |
| /************************************************** | |
| * Init. | |
| **************************************************/ | |
| static void bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc) | |
| { | |
| bcma_pcicore_serdes_workaround(pc); | |
| bcma_core_pci_config_fixup(pc); | |
| } | |
| void bcma_core_pci_init(struct bcma_drv_pci *pc) | |
| { | |
| if (pc->setup_done) | |
| return; | |
| bcma_core_pci_early_init(pc); | |
| if (pc->hostmode) | |
| bcma_core_pci_hostmode_init(pc); | |
| else | |
| bcma_core_pci_clientmode_init(pc); | |
| } | |
| void bcma_core_pci_power_save(struct bcma_bus *bus, bool up) | |
| { | |
| struct bcma_drv_pci *pc; | |
| u16 data; | |
| if (bus->hosttype != BCMA_HOSTTYPE_PCI) | |
| return; | |
| pc = &bus->drv_pci[0]; | |
| if (pc->core->id.rev >= 15 && pc->core->id.rev <= 20) { | |
| data = up ? 0x74 : 0x7C; | |
| bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, | |
| BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7F64); | |
| bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, | |
| BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data); | |
| } else if (pc->core->id.rev >= 21 && pc->core->id.rev <= 22) { | |
| data = up ? 0x75 : 0x7D; | |
| bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, | |
| BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7E65); | |
| bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, | |
| BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data); | |
| } | |
| } | |
| EXPORT_SYMBOL_GPL(bcma_core_pci_power_save); | |
| static void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend) | |
| { | |
| u32 w; | |
| w = bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG); | |
| if (extend) | |
| w |= BCMA_CORE_PCI_ASPMTIMER_EXTEND; | |
| else | |
| w &= ~BCMA_CORE_PCI_ASPMTIMER_EXTEND; | |
| bcma_pcie_write(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG, w); | |
| bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG); | |
| } | |
| void bcma_core_pci_up(struct bcma_drv_pci *pc) | |
| { | |
| bcma_core_pci_extend_L1timer(pc, true); | |
| } | |
| void bcma_core_pci_down(struct bcma_drv_pci *pc) | |
| { | |
| bcma_core_pci_extend_L1timer(pc, false); | |
| } |