| * Clock bindings for Freescale i.MX27 | |
| Required properties: | |
| - compatible: Should be "fsl,imx27-ccm" | |
| - reg: Address and length of the register set | |
| - interrupts: Should contain CCM interrupt | |
| - #clock-cells: Should be <1> | |
| The clock consumer should specify the desired clock by having the clock | |
| ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx27-clock.h | |
| for the full list of i.MX27 clock IDs. | |
| Examples: | |
| clks: ccm@10027000{ | |
| compatible = "fsl,imx27-ccm"; | |
| reg = <0x10027000 0x1000>; | |
| #clock-cells = <1>; | |
| }; | |
| uart1: serial@1000a000 { | |
| compatible = "fsl,imx27-uart", "fsl,imx21-uart"; | |
| reg = <0x1000a000 0x1000>; | |
| interrupts = <20>; | |
| clocks = <&clks IMX27_CLK_UART1_IPG_GATE>, | |
| <&clks IMX27_CLK_PER1_GATE>; | |
| clock-names = "ipg", "per"; | |
| }; |