| * Clock bindings for Freescale i.MX6 Quad | |
| Required properties: | |
| - compatible: Should be "fsl,imx6q-ccm" | |
| - reg: Address and length of the register set | |
| - interrupts: Should contain CCM interrupt | |
| - #clock-cells: Should be <1> | |
| The clock consumer should specify the desired clock by having the clock | |
| ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6qdl-clock.h | |
| for the full list of i.MX6 Quad and DualLite clock IDs. | |
| Examples: | |
| #include <dt-bindings/clock/imx6qdl-clock.h> | |
| clks: ccm@020c4000 { | |
| compatible = "fsl,imx6q-ccm"; | |
| reg = <0x020c4000 0x4000>; | |
| interrupts = <0 87 0x04 0 88 0x04>; | |
| #clock-cells = <1>; | |
| }; | |
| uart1: serial@02020000 { | |
| compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; | |
| reg = <0x02020000 0x4000>; | |
| interrupts = <0 26 0x04>; | |
| clocks = <&clks IMX6QDL_CLK_UART_IPG>, <&clks IMX6QDL_CLK_UART_SERIAL>; | |
| clock-names = "ipg", "per"; | |
| }; |