| EEPROMs (I2C) | |
| Required properties: | |
| - compatible : should be "<manufacturer>,<type>", like these: | |
| "atmel,24c00", "atmel,24c01", "atmel,24c02", "atmel,24c04", | |
| "atmel,24c08", "atmel,24c16", "atmel,24c32", "atmel,24c64", | |
| "atmel,24c128", "atmel,24c256", "atmel,24c512", "atmel,24c1024" | |
| "catalyst,24c32" | |
| "microchip,24c128" | |
| "ramtron,24c64" | |
| "renesas,r1ex24002" | |
| The following manufacturers values have been deprecated: | |
| "at", "at24" | |
| If there is no specific driver for <manufacturer>, a generic | |
| device with <type> and manufacturer "atmel" should be used. | |
| Possible types are: | |
| "24c00", "24c01", "24c02", "24c04", "24c08", "24c16", "24c32", "24c64", | |
| "24c128", "24c256", "24c512", "24c1024", "spd" | |
| - reg : the I2C address of the EEPROM | |
| Optional properties: | |
| - pagesize : the length of the pagesize for writing. Please consult the | |
| manual of your device, that value varies a lot. A wrong value | |
| may result in data loss! If not specified, a safety value of | |
| '1' is used which will be very slow. | |
| - read-only: this parameterless property disables writes to the eeprom | |
| Example: | |
| eeprom@52 { | |
| compatible = "atmel,24c32"; | |
| reg = <0x52>; | |
| pagesize = <32>; | |
| }; |