| ltc2978 | |
| Required properties: | |
| - compatible: should contain one of: | |
| * "lltc,ltc2974" | |
| * "lltc,ltc2975" | |
| * "lltc,ltc2977" | |
| * "lltc,ltc2978" | |
| * "lltc,ltc2980" | |
| * "lltc,ltc3880" | |
| * "lltc,ltc3882" | |
| * "lltc,ltc3883" | |
| * "lltc,ltc3886" | |
| * "lltc,ltc3887" | |
| * "lltc,ltm2987" | |
| * "lltc,ltm4675" | |
| * "lltc,ltm4676" | |
| - reg: I2C slave address | |
| Optional properties: | |
| - regulators: A node that houses a sub-node for each regulator controlled by | |
| the device. Each sub-node is identified using the node's name, with valid | |
| values listed below. The content of each sub-node is defined by the | |
| standard binding for regulators; see regulator.txt. | |
| Valid names of regulators depend on number of supplies supported per device: | |
| * ltc2974, ltc2975 : vout0 - vout3 | |
| * ltc2977, ltc2980, ltm2987 : vout0 - vout7 | |
| * ltc2978 : vout0 - vout7 | |
| * ltc3880, ltc3882, ltc3886 : vout0 - vout1 | |
| * ltc3883 : vout0 | |
| * ltm4676 : vout0 - vout1 | |
| Example: | |
| ltc2978@5e { | |
| compatible = "lltc,ltc2978"; | |
| reg = <0x5e>; | |
| regulators { | |
| vout0 { | |
| regulator-name = "FPGA-2.5V"; | |
| }; | |
| vout2 { | |
| regulator-name = "FPGA-1.5V"; | |
| }; | |
| }; | |
| }; |