| Amlogic Meson I2C controller | |
| Required properties: | |
| - compatible: must be "amlogic,meson6-i2c" or "amlogic,meson-gxbb-i2c" | |
| - reg: physical address and length of the device registers | |
| - interrupts: a single interrupt specifier | |
| - clocks: clock for the device | |
| - #address-cells: should be <1> | |
| - #size-cells: should be <0> | |
| For details regarding the following core I2C bindings see also i2c.txt. | |
| Optional properties: | |
| - clock-frequency: the desired I2C bus clock frequency in Hz; in | |
| absence of this property the default value is used (100 kHz). | |
| Examples: | |
| i2c@c8100500 { | |
| compatible = "amlogic,meson6-i2c"; | |
| reg = <0xc8100500 0x20>; | |
| interrupts = <0 92 1>; | |
| clocks = <&clk81>; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| }; |