| * NXP PNX I2C Controller | |
| Required properties: | |
| - reg: Offset and length of the register set for the device | |
| - compatible: should be "nxp,pnx-i2c" | |
| - interrupts: configure one interrupt line | |
| - #address-cells: always 1 (for i2c addresses) | |
| - #size-cells: always 0 | |
| - interrupt-parent: the phandle for the interrupt controller that | |
| services interrupts for this device. | |
| Optional properties: | |
| - clock-frequency: desired I2C bus clock frequency in Hz, Default: 100000 Hz | |
| Examples: | |
| i2c1: i2c@400a0000 { | |
| compatible = "nxp,pnx-i2c"; | |
| reg = <0x400a0000 0x100>; | |
| interrupt-parent = <&mic>; | |
| interrupts = <51 0>; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| }; | |
| i2c2: i2c@400a8000 { | |
| compatible = "nxp,pnx-i2c"; | |
| reg = <0x400a8000 0x100>; | |
| interrupt-parent = <&mic>; | |
| interrupts = <50 0>; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| clock-frequency = <100000>; | |
| }; |