| TI/National Semiconductor LP3943 MFD driver | |
| Required properties: | |
| - compatible: "ti,lp3943" | |
| - reg: I2C slave address. From 0x60 to 0x67. | |
| LP3943 consists of two sub-devices, lp3943-gpio and lp3943-pwm. | |
| For the LP3943 GPIO properties please refer to: | |
| Documentation/devicetree/bindings/gpio/gpio-lp3943.txt | |
| For the LP3943 PWM properties please refer to: | |
| Documentation/devicetree/bindings/pwm/pwm-lp3943.txt | |
| Example: | |
| lp3943@60 { | |
| compatible = "ti,lp3943"; | |
| reg = <0x60>; | |
| gpioex: gpio { | |
| compatible = "ti,lp3943-gpio"; | |
| gpio-controller; | |
| #gpio-cells = <2>; | |
| }; | |
| pwm3943: pwm { | |
| compatible = "ti,lp3943-pwm"; | |
| #pwm-cells = <2>; | |
| ti,pwm0 = <8 9 10>; | |
| ti,pwm1 = <15>; | |
| }; | |
| }; |