| Maxim MAX77686 multi-function device | |
| MAX77686 is a Multifunction device with PMIC, RTC and Charger on chip. It is | |
| interfaced to host controller using i2c interface. PMIC and Charger submodules | |
| are addressed using same i2c slave address whereas RTC submodule uses | |
| different i2c slave address,presently for which we are statically creating i2c | |
| client while probing.This document describes the binding for mfd device and | |
| PMIC submodule. | |
| Bindings for the built-in 32k clock generator block and | |
| regulators are defined in ../clk/maxim,max77686.txt and | |
| ../regulator/max77686.txt respectively. | |
| Required properties: | |
| - compatible : Must be "maxim,max77686"; | |
| - reg : Specifies the i2c slave address of PMIC block. | |
| - interrupts : This i2c device has an IRQ line connected to the main SoC. | |
| - interrupt-parent : The parent interrupt controller. | |
| Example: | |
| max77686: pmic@09 { | |
| compatible = "maxim,max77686"; | |
| interrupt-parent = <&wakeup_eint>; | |
| interrupts = <26 0>; | |
| reg = <0x09>; | |
| }; |