| Generic SYSCON mapped register reset driver | |
| This is a generic reset driver using syscon to map the reset register. | |
| The reset is generally performed with a write to the reset register | |
| defined by the register map pointed by syscon reference plus the offset | |
| with the mask defined in the reboot node. | |
| Required properties: | |
| - compatible: should contain "syscon-reboot" | |
| - regmap: this is phandle to the register map node | |
| - offset: offset in the register map for the reboot register (in bytes) | |
| - mask: the reset value written to the reboot register (32 bit access) | |
| Default will be little endian mode, 32 bit access only. | |
| Examples: | |
| reboot { | |
| compatible = "syscon-reboot"; | |
| regmap = <®mapnode>; | |
| offset = <0x0>; | |
| mask = <0x1>; | |
| }; |