| RT5660 audio CODEC | |
| This device supports I2C only. | |
| Required properties: | |
| - compatible : "realtek,rt5660". | |
| - reg : The I2C address of the device. | |
| Optional properties: | |
| - clocks: The phandle of the master clock to the CODEC | |
| - clock-names: Should be "mclk" | |
| - realtek,in1-differential | |
| - realtek,in3-differential | |
| Boolean. Indicate MIC1/3 input are differential, rather than single-ended. | |
| - realtek,poweroff-in-suspend | |
| Boolean. If the codec will be powered off in suspend, the resume should be | |
| added delay time for waiting codec power ready. | |
| - realtek,dmic1-data-pin | |
| 0: dmic1 is not used | |
| 1: using GPIO2 pin as dmic1 data pin | |
| 2: using IN1P pin as dmic1 data pin | |
| Pins on the device (for linking into audio routes) for RT5660: | |
| * DMIC L1 | |
| * DMIC R1 | |
| * IN1P | |
| * IN1N | |
| * IN2P | |
| * IN3P | |
| * IN3N | |
| * SPO | |
| * LOUTL | |
| * LOUTR | |
| Example: | |
| rt5660 { | |
| compatible = "realtek,rt5660"; | |
| reg = <0x1c>; | |
| }; |