| Faraday Technology timer | |
| This timer is a generic IP block from Faraday Technology, embedded in the | |
| Cortina Systems Gemini SoCs and other designs. | |
| Required properties: | |
| - compatible : Must be one of | |
| "faraday,fttmr010" | |
| "cortina,gemini-timer", "faraday,fttmr010" | |
| "moxa,moxart-timer", "faraday,fttmr010" | |
| "aspeed,ast2400-timer" | |
| "aspeed,ast2500-timer" | |
| - reg : Should contain registers location and length | |
| - interrupts : Should contain the three timer interrupts usually with | |
| flags for falling edge | |
| Optionally required properties: | |
| - clocks : a clock to provide the tick rate for "faraday,fttmr010" | |
| - clock-names : should be "EXTCLK" and "PCLK" for the external tick timer | |
| and peripheral clock respectively, for "faraday,fttmr010" | |
| - syscon : a phandle to the global Gemini system controller if the compatible | |
| type is "cortina,gemini-timer" | |
| Example: | |
| timer@43000000 { | |
| compatible = "faraday,fttmr010"; | |
| reg = <0x43000000 0x1000>; | |
| interrupts = <14 IRQ_TYPE_EDGE_FALLING>, /* Timer 1 */ | |
| <15 IRQ_TYPE_EDGE_FALLING>, /* Timer 2 */ | |
| <16 IRQ_TYPE_EDGE_FALLING>; /* Timer 3 */ | |
| clocks = <&extclk>, <&pclk>; | |
| clock-names = "EXTCLK", "PCLK"; | |
| }; |