| #ifndef _MAPPI2_PLD_H | |
| #define _MAPPI2_PLD_H | |
| /* | |
| * include/asm-m32r/mappi2/mappi2_pld.h | |
| * | |
| * Definitions for Extended IO Logic on MAPPI2 board. | |
| * based on m32700ut_pld.h | |
| * | |
| * This file is subject to the terms and conditions of the GNU General | |
| * Public License. See the file "COPYING" in the main directory of | |
| * this archive for more details. | |
| */ | |
| #ifndef __ASSEMBLY__ | |
| /* FIXME: | |
| * Some C functions use non-cache address, so can't define non-cache address. | |
| */ | |
| #define PLD_BASE (0x10c00000 /* + NONCACHE_OFFSET */) | |
| #define __reg8 (volatile unsigned char *) | |
| #define __reg16 (volatile unsigned short *) | |
| #define __reg32 (volatile unsigned int *) | |
| #else | |
| #define PLD_BASE (0x10c00000 + NONCACHE_OFFSET) | |
| #define __reg8 | |
| #define __reg16 | |
| #define __reg32 | |
| #endif /* __ASSEMBLY__ */ | |
| /* CFC */ | |
| #define PLD_CFRSTCR __reg16(PLD_BASE + 0x0000) | |
| #define PLD_CFSTS __reg16(PLD_BASE + 0x0002) | |
| #define PLD_CFIMASK __reg16(PLD_BASE + 0x0004) | |
| #define PLD_CFBUFCR __reg16(PLD_BASE + 0x0006) | |
| #define PLD_CFCR0 __reg16(PLD_BASE + 0x000a) | |
| #define PLD_CFCR1 __reg16(PLD_BASE + 0x000c) | |
| /* MMC */ | |
| #define PLD_MMCCR __reg16(PLD_BASE + 0x4000) | |
| #define PLD_MMCMOD __reg16(PLD_BASE + 0x4002) | |
| #define PLD_MMCSTS __reg16(PLD_BASE + 0x4006) | |
| #define PLD_MMCBAUR __reg16(PLD_BASE + 0x400a) | |
| #define PLD_MMCCMDBCUT __reg16(PLD_BASE + 0x400c) | |
| #define PLD_MMCCDTBCUT __reg16(PLD_BASE + 0x400e) | |
| #define PLD_MMCDET __reg16(PLD_BASE + 0x4010) | |
| #define PLD_MMCWP __reg16(PLD_BASE + 0x4012) | |
| #define PLD_MMCWDATA __reg16(PLD_BASE + 0x5000) | |
| #define PLD_MMCRDATA __reg16(PLD_BASE + 0x6000) | |
| #define PLD_MMCCMDDATA __reg16(PLD_BASE + 0x7000) | |
| #define PLD_MMCRSPDATA __reg16(PLD_BASE + 0x7006) | |
| /* Power Control of MMC and CF */ | |
| #define PLD_CPCR __reg16(PLD_BASE + 0x14000) | |
| /*==== ICU ====*/ | |
| #define M32R_IRQ_PC104 (5) /* INT4(PC/104) */ | |
| #define M32R_IRQ_I2C (28) /* I2C-BUS */ | |
| #if 1 | |
| #define PLD_IRQ_CFIREQ (40) /* CFC Card Interrupt */ | |
| #define PLD_IRQ_CFC_INSERT (41) /* CFC Card Insert */ | |
| #define PLD_IRQ_CFC_EJECT (42) /* CFC Card Eject */ | |
| #define PLD_IRQ_MMCCARD (43) /* MMC Card Insert */ | |
| #define PLD_IRQ_MMCIRQ (44) /* MMC Transfer Done */ | |
| #else | |
| #define PLD_IRQ_CFIREQ (34) /* CFC Card Interrupt */ | |
| #define PLD_IRQ_CFC_INSERT (35) /* CFC Card Insert */ | |
| #define PLD_IRQ_CFC_EJECT (36) /* CFC Card Eject */ | |
| #define PLD_IRQ_MMCCARD (37) /* MMC Card Insert */ | |
| #define PLD_IRQ_MMCIRQ (38) /* MMC Transfer Done */ | |
| #endif | |
| #if 0 | |
| /* LED Control | |
| * | |
| * 1: DIP swich side | |
| * 2: Reset switch side | |
| */ | |
| #define PLD_IOLEDCR __reg16(PLD_BASE + 0x14002) | |
| #define PLD_IOLED_1_ON 0x001 | |
| #define PLD_IOLED_1_OFF 0x000 | |
| #define PLD_IOLED_2_ON 0x002 | |
| #define PLD_IOLED_2_OFF 0x000 | |
| /* DIP Switch | |
| * 0: Write-protect of Flash Memory (0:protected, 1:non-protected) | |
| * 1: - | |
| * 2: - | |
| * 3: - | |
| */ | |
| #define PLD_IOSWSTS __reg16(PLD_BASE + 0x14004) | |
| #define PLD_IOSWSTS_IOSW2 0x0200 | |
| #define PLD_IOSWSTS_IOSW1 0x0100 | |
| #define PLD_IOSWSTS_IOWP0 0x0001 | |
| #endif | |
| /* CRC */ | |
| #define PLD_CRC7DATA __reg16(PLD_BASE + 0x18000) | |
| #define PLD_CRC7INDATA __reg16(PLD_BASE + 0x18002) | |
| #define PLD_CRC16DATA __reg16(PLD_BASE + 0x18004) | |
| #define PLD_CRC16INDATA __reg16(PLD_BASE + 0x18006) | |
| #define PLD_CRC16ADATA __reg16(PLD_BASE + 0x18008) | |
| #define PLD_CRC16AINDATA __reg16(PLD_BASE + 0x1800a) | |
| #if 0 | |
| /* RTC */ | |
| #define PLD_RTCCR __reg16(PLD_BASE + 0x1c000) | |
| #define PLD_RTCBAUR __reg16(PLD_BASE + 0x1c002) | |
| #define PLD_RTCWRDATA __reg16(PLD_BASE + 0x1c004) | |
| #define PLD_RTCRDDATA __reg16(PLD_BASE + 0x1c006) | |
| #define PLD_RTCRSTODT __reg16(PLD_BASE + 0x1c008) | |
| /* SIO0 */ | |
| #define PLD_ESIO0CR __reg16(PLD_BASE + 0x20000) | |
| #define PLD_ESIO0CR_TXEN 0x0001 | |
| #define PLD_ESIO0CR_RXEN 0x0002 | |
| #define PLD_ESIO0MOD0 __reg16(PLD_BASE + 0x20002) | |
| #define PLD_ESIO0MOD0_CTSS 0x0040 | |
| #define PLD_ESIO0MOD0_RTSS 0x0080 | |
| #define PLD_ESIO0MOD1 __reg16(PLD_BASE + 0x20004) | |
| #define PLD_ESIO0MOD1_LMFS 0x0010 | |
| #define PLD_ESIO0STS __reg16(PLD_BASE + 0x20006) | |
| #define PLD_ESIO0STS_TEMP 0x0001 | |
| #define PLD_ESIO0STS_TXCP 0x0002 | |
| #define PLD_ESIO0STS_RXCP 0x0004 | |
| #define PLD_ESIO0STS_TXSC 0x0100 | |
| #define PLD_ESIO0STS_RXSC 0x0200 | |
| #define PLD_ESIO0STS_TXREADY (PLD_ESIO0STS_TXCP | PLD_ESIO0STS_TEMP) | |
| #define PLD_ESIO0INTCR __reg16(PLD_BASE + 0x20008) | |
| #define PLD_ESIO0INTCR_TXIEN 0x0002 | |
| #define PLD_ESIO0INTCR_RXCEN 0x0004 | |
| #define PLD_ESIO0BAUR __reg16(PLD_BASE + 0x2000a) | |
| #define PLD_ESIO0TXB __reg16(PLD_BASE + 0x2000c) | |
| #define PLD_ESIO0RXB __reg16(PLD_BASE + 0x2000e) | |
| /* SIM Card */ | |
| #define PLD_SCCR __reg16(PLD_BASE + 0x38000) | |
| #define PLD_SCMOD __reg16(PLD_BASE + 0x38004) | |
| #define PLD_SCSTS __reg16(PLD_BASE + 0x38006) | |
| #define PLD_SCINTCR __reg16(PLD_BASE + 0x38008) | |
| #define PLD_SCBAUR __reg16(PLD_BASE + 0x3800a) | |
| #define PLD_SCTXB __reg16(PLD_BASE + 0x3800c) | |
| #define PLD_SCRXB __reg16(PLD_BASE + 0x3800e) | |
| #endif | |
| #endif /* _MAPPI2_PLD.H */ |