| /* MN10300 Arch-specific interrupt handling | |
| * | |
| * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. | |
| * Written by David Howells (dhowells@redhat.com) | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public Licence | |
| * as published by the Free Software Foundation; either version | |
| * 2 of the Licence, or (at your option) any later version. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/kernel_stat.h> | |
| #include <linux/seq_file.h> | |
| #include <linux/cpumask.h> | |
| #include <asm/setup.h> | |
| #include <asm/serial-regs.h> | |
| unsigned long __mn10300_irq_enabled_epsw[NR_CPUS] __cacheline_aligned_in_smp = { | |
| [0 ... NR_CPUS - 1] = EPSW_IE | EPSW_IM_7 | |
| }; | |
| EXPORT_SYMBOL(__mn10300_irq_enabled_epsw); | |
| #ifdef CONFIG_SMP | |
| static char irq_affinity_online[NR_IRQS] = { | |
| [0 ... NR_IRQS - 1] = 0 | |
| }; | |
| #define NR_IRQ_WORDS ((NR_IRQS + 31) / 32) | |
| static unsigned long irq_affinity_request[NR_IRQ_WORDS] = { | |
| [0 ... NR_IRQ_WORDS - 1] = 0 | |
| }; | |
| #endif /* CONFIG_SMP */ | |
| atomic_t irq_err_count; | |
| /* | |
| * MN10300 interrupt controller operations | |
| */ | |
| static void mn10300_cpupic_ack(struct irq_data *d) | |
| { | |
| unsigned int irq = d->irq; | |
| unsigned long flags; | |
| u16 tmp; | |
| flags = arch_local_cli_save(); | |
| GxICR_u8(irq) = GxICR_DETECT; | |
| tmp = GxICR(irq); | |
| arch_local_irq_restore(flags); | |
| } | |
| static void __mask_and_set_icr(unsigned int irq, | |
| unsigned int mask, unsigned int set) | |
| { | |
| unsigned long flags; | |
| u16 tmp; | |
| flags = arch_local_cli_save(); | |
| tmp = GxICR(irq); | |
| GxICR(irq) = (tmp & mask) | set; | |
| tmp = GxICR(irq); | |
| arch_local_irq_restore(flags); | |
| } | |
| static void mn10300_cpupic_mask(struct irq_data *d) | |
| { | |
| __mask_and_set_icr(d->irq, GxICR_LEVEL, 0); | |
| } | |
| static void mn10300_cpupic_mask_ack(struct irq_data *d) | |
| { | |
| unsigned int irq = d->irq; | |
| #ifdef CONFIG_SMP | |
| unsigned long flags; | |
| u16 tmp; | |
| flags = arch_local_cli_save(); | |
| if (!test_and_clear_bit(irq, irq_affinity_request)) { | |
| tmp = GxICR(irq); | |
| GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_DETECT; | |
| tmp = GxICR(irq); | |
| } else { | |
| u16 tmp2; | |
| tmp = GxICR(irq); | |
| GxICR(irq) = (tmp & GxICR_LEVEL); | |
| tmp2 = GxICR(irq); | |
| irq_affinity_online[irq] = | |
| cpumask_any_and(irq_data_get_affinity_mask(d), | |
| cpu_online_mask); | |
| CROSS_GxICR(irq, irq_affinity_online[irq]) = | |
| (tmp & (GxICR_LEVEL | GxICR_ENABLE)) | GxICR_DETECT; | |
| tmp = CROSS_GxICR(irq, irq_affinity_online[irq]); | |
| } | |
| arch_local_irq_restore(flags); | |
| #else /* CONFIG_SMP */ | |
| __mask_and_set_icr(irq, GxICR_LEVEL, GxICR_DETECT); | |
| #endif /* CONFIG_SMP */ | |
| } | |
| static void mn10300_cpupic_unmask(struct irq_data *d) | |
| { | |
| __mask_and_set_icr(d->irq, GxICR_LEVEL, GxICR_ENABLE); | |
| } | |
| static void mn10300_cpupic_unmask_clear(struct irq_data *d) | |
| { | |
| unsigned int irq = d->irq; | |
| /* the MN10300 PIC latches its interrupt request bit, even after the | |
| * device has ceased to assert its interrupt line and the interrupt | |
| * channel has been disabled in the PIC, so for level-triggered | |
| * interrupts we need to clear the request bit when we re-enable */ | |
| #ifdef CONFIG_SMP | |
| unsigned long flags; | |
| u16 tmp; | |
| flags = arch_local_cli_save(); | |
| if (!test_and_clear_bit(irq, irq_affinity_request)) { | |
| tmp = GxICR(irq); | |
| GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE | GxICR_DETECT; | |
| tmp = GxICR(irq); | |
| } else { | |
| tmp = GxICR(irq); | |
| irq_affinity_online[irq] = cpumask_any_and(irq_data_get_affinity_mask(d), | |
| cpu_online_mask); | |
| CROSS_GxICR(irq, irq_affinity_online[irq]) = (tmp & GxICR_LEVEL) | GxICR_ENABLE | GxICR_DETECT; | |
| tmp = CROSS_GxICR(irq, irq_affinity_online[irq]); | |
| } | |
| arch_local_irq_restore(flags); | |
| #else /* CONFIG_SMP */ | |
| __mask_and_set_icr(irq, GxICR_LEVEL, GxICR_ENABLE | GxICR_DETECT); | |
| #endif /* CONFIG_SMP */ | |
| } | |
| #ifdef CONFIG_SMP | |
| static int | |
| mn10300_cpupic_setaffinity(struct irq_data *d, const struct cpumask *mask, | |
| bool force) | |
| { | |
| unsigned long flags; | |
| flags = arch_local_cli_save(); | |
| set_bit(d->irq, irq_affinity_request); | |
| arch_local_irq_restore(flags); | |
| return 0; | |
| } | |
| #endif /* CONFIG_SMP */ | |
| /* | |
| * MN10300 PIC level-triggered IRQ handling. | |
| * | |
| * The PIC has no 'ACK' function per se. It is possible to clear individual | |
| * channel latches, but each latch relatches whether or not the channel is | |
| * masked, so we need to clear the latch when we unmask the channel. | |
| * | |
| * Also for this reason, we don't supply an ack() op (it's unused anyway if | |
| * mask_ack() is provided), and mask_ack() just masks. | |
| */ | |
| static struct irq_chip mn10300_cpu_pic_level = { | |
| .name = "cpu_l", | |
| .irq_disable = mn10300_cpupic_mask, | |
| .irq_enable = mn10300_cpupic_unmask_clear, | |
| .irq_ack = NULL, | |
| .irq_mask = mn10300_cpupic_mask, | |
| .irq_mask_ack = mn10300_cpupic_mask, | |
| .irq_unmask = mn10300_cpupic_unmask_clear, | |
| #ifdef CONFIG_SMP | |
| .irq_set_affinity = mn10300_cpupic_setaffinity, | |
| #endif | |
| }; | |
| /* | |
| * MN10300 PIC edge-triggered IRQ handling. | |
| * | |
| * We use the latch clearing function of the PIC as the 'ACK' function. | |
| */ | |
| static struct irq_chip mn10300_cpu_pic_edge = { | |
| .name = "cpu_e", | |
| .irq_disable = mn10300_cpupic_mask, | |
| .irq_enable = mn10300_cpupic_unmask, | |
| .irq_ack = mn10300_cpupic_ack, | |
| .irq_mask = mn10300_cpupic_mask, | |
| .irq_mask_ack = mn10300_cpupic_mask_ack, | |
| .irq_unmask = mn10300_cpupic_unmask, | |
| #ifdef CONFIG_SMP | |
| .irq_set_affinity = mn10300_cpupic_setaffinity, | |
| #endif | |
| }; | |
| /* | |
| * 'what should we do if we get a hw irq event on an illegal vector'. | |
| * each architecture has to answer this themselves. | |
| */ | |
| void ack_bad_irq(int irq) | |
| { | |
| printk(KERN_WARNING "unexpected IRQ trap at vector %02x\n", irq); | |
| } | |
| /* | |
| * change the level at which an IRQ executes | |
| * - must not be called whilst interrupts are being processed! | |
| */ | |
| void set_intr_level(int irq, u16 level) | |
| { | |
| BUG_ON(in_interrupt()); | |
| __mask_and_set_icr(irq, GxICR_ENABLE, level); | |
| } | |
| /* | |
| * mark an interrupt to be ACK'd after interrupt handlers have been run rather | |
| * than before | |
| */ | |
| void mn10300_set_lateack_irq_type(int irq) | |
| { | |
| irq_set_chip_and_handler(irq, &mn10300_cpu_pic_level, | |
| handle_level_irq); | |
| } | |
| /* | |
| * initialise the interrupt system | |
| */ | |
| void __init init_IRQ(void) | |
| { | |
| int irq; | |
| for (irq = 0; irq < NR_IRQS; irq++) | |
| if (irq_get_chip(irq) == &no_irq_chip) | |
| /* due to the PIC latching interrupt requests, even | |
| * when the IRQ is disabled, IRQ_PENDING is superfluous | |
| * and we can use handle_level_irq() for edge-triggered | |
| * interrupts */ | |
| irq_set_chip_and_handler(irq, &mn10300_cpu_pic_edge, | |
| handle_level_irq); | |
| unit_init_IRQ(); | |
| } | |
| /* | |
| * handle normal device IRQs | |
| */ | |
| asmlinkage void do_IRQ(void) | |
| { | |
| unsigned long sp, epsw, irq_disabled_epsw, old_irq_enabled_epsw; | |
| unsigned int cpu_id = smp_processor_id(); | |
| int irq; | |
| sp = current_stack_pointer(); | |
| BUG_ON(sp - (sp & ~(THREAD_SIZE - 1)) < STACK_WARN); | |
| /* make sure local_irq_enable() doesn't muck up the interrupt priority | |
| * setting in EPSW */ | |
| old_irq_enabled_epsw = __mn10300_irq_enabled_epsw[cpu_id]; | |
| local_save_flags(epsw); | |
| __mn10300_irq_enabled_epsw[cpu_id] = EPSW_IE | (EPSW_IM & epsw); | |
| irq_disabled_epsw = EPSW_IE | MN10300_CLI_LEVEL; | |
| #ifdef CONFIG_MN10300_WD_TIMER | |
| __IRQ_STAT(cpu_id, __irq_count)++; | |
| #endif | |
| irq_enter(); | |
| for (;;) { | |
| /* ask the interrupt controller for the next IRQ to process | |
| * - the result we get depends on EPSW.IM | |
| */ | |
| irq = IAGR & IAGR_GN; | |
| if (!irq) | |
| break; | |
| local_irq_restore(irq_disabled_epsw); | |
| generic_handle_irq(irq >> 2); | |
| /* restore IRQ controls for IAGR access */ | |
| local_irq_restore(epsw); | |
| } | |
| __mn10300_irq_enabled_epsw[cpu_id] = old_irq_enabled_epsw; | |
| irq_exit(); | |
| } | |
| /* | |
| * Display interrupt management information through /proc/interrupts | |
| */ | |
| int arch_show_interrupts(struct seq_file *p, int prec) | |
| { | |
| #ifdef CONFIG_MN10300_WD_TIMER | |
| int j; | |
| seq_printf(p, "%*s: ", prec, "NMI"); | |
| for (j = 0; j < NR_CPUS; j++) | |
| if (cpu_online(j)) | |
| seq_printf(p, "%10u ", nmi_count(j)); | |
| seq_putc(p, '\n'); | |
| #endif | |
| seq_printf(p, "%*s: ", prec, "ERR"); | |
| seq_printf(p, "%10u\n", atomic_read(&irq_err_count)); | |
| return 0; | |
| } | |
| #ifdef CONFIG_HOTPLUG_CPU | |
| void migrate_irqs(void) | |
| { | |
| int irq; | |
| unsigned int self, new; | |
| unsigned long flags; | |
| self = smp_processor_id(); | |
| for (irq = 0; irq < NR_IRQS; irq++) { | |
| struct irq_data *data = irq_get_irq_data(irq); | |
| struct cpumask *mask = irq_data_get_affinity_mask(data); | |
| if (irqd_is_per_cpu(data)) | |
| continue; | |
| if (cpumask_test_cpu(self, mask) && | |
| !cpumask_intersects(&irq_affinity[irq], cpu_online_mask)) { | |
| int cpu_id; | |
| cpu_id = cpumask_first(cpu_online_mask); | |
| cpumask_set_cpu(cpu_id, mask); | |
| } | |
| /* We need to operate irq_affinity_online atomically. */ | |
| arch_local_cli_save(flags); | |
| if (irq_affinity_online[irq] == self) { | |
| u16 x, tmp; | |
| x = GxICR(irq); | |
| GxICR(irq) = x & GxICR_LEVEL; | |
| tmp = GxICR(irq); | |
| new = cpumask_any_and(mask, cpu_online_mask); | |
| irq_affinity_online[irq] = new; | |
| CROSS_GxICR(irq, new) = | |
| (x & GxICR_LEVEL) | GxICR_DETECT; | |
| tmp = CROSS_GxICR(irq, new); | |
| x &= GxICR_LEVEL | GxICR_ENABLE; | |
| if (GxICR(irq) & GxICR_REQUEST) | |
| x |= GxICR_REQUEST | GxICR_DETECT; | |
| CROSS_GxICR(irq, new) = x; | |
| tmp = CROSS_GxICR(irq, new); | |
| } | |
| arch_local_irq_restore(flags); | |
| } | |
| } | |
| #endif /* CONFIG_HOTPLUG_CPU */ |