| /* MN10300 MMU Fault handler | |
| * | |
| * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. | |
| * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. | |
| * Modified by David Howells (dhowells@redhat.com) | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public Licence | |
| * as published by the Free Software Foundation; either version | |
| * 2 of the Licence, or (at your option) any later version. | |
| */ | |
| #include <linux/signal.h> | |
| #include <linux/sched.h> | |
| #include <linux/kernel.h> | |
| #include <linux/errno.h> | |
| #include <linux/string.h> | |
| #include <linux/types.h> | |
| #include <linux/ptrace.h> | |
| #include <linux/mman.h> | |
| #include <linux/mm.h> | |
| #include <linux/smp.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/init.h> | |
| #include <linux/vt_kern.h> /* For unblank_screen() */ | |
| #include <linux/uaccess.h> | |
| #include <asm/pgalloc.h> | |
| #include <asm/hardirq.h> | |
| #include <asm/cpu-regs.h> | |
| #include <asm/debugger.h> | |
| #include <asm/gdb-stub.h> | |
| /* | |
| * Unlock any spinlocks which will prevent us from getting the | |
| * message out | |
| */ | |
| void bust_spinlocks(int yes) | |
| { | |
| if (yes) { | |
| oops_in_progress = 1; | |
| } else { | |
| int loglevel_save = console_loglevel; | |
| #ifdef CONFIG_VT | |
| unblank_screen(); | |
| #endif | |
| oops_in_progress = 0; | |
| /* | |
| * OK, the message is on the console. Now we call printk() | |
| * without oops_in_progress set so that printk will give klogd | |
| * a poke. Hold onto your hats... | |
| */ | |
| console_loglevel = 15; /* NMI oopser may have shut the console | |
| * up */ | |
| printk(" "); | |
| console_loglevel = loglevel_save; | |
| } | |
| } | |
| void do_BUG(const char *file, int line) | |
| { | |
| bust_spinlocks(1); | |
| printk(KERN_EMERG "------------[ cut here ]------------\n"); | |
| printk(KERN_EMERG "kernel BUG at %s:%d!\n", file, line); | |
| } | |
| #if 0 | |
| static void print_pagetable_entries(pgd_t *pgdir, unsigned long address) | |
| { | |
| pgd_t *pgd; | |
| pmd_t *pmd; | |
| pte_t *pte; | |
| pgd = pgdir + __pgd_offset(address); | |
| printk(KERN_DEBUG "pgd entry %p: %016Lx\n", | |
| pgd, (long long) pgd_val(*pgd)); | |
| if (!pgd_present(*pgd)) { | |
| printk(KERN_DEBUG "... pgd not present!\n"); | |
| return; | |
| } | |
| pmd = pmd_offset(pgd, address); | |
| printk(KERN_DEBUG "pmd entry %p: %016Lx\n", | |
| pmd, (long long)pmd_val(*pmd)); | |
| if (!pmd_present(*pmd)) { | |
| printk(KERN_DEBUG "... pmd not present!\n"); | |
| return; | |
| } | |
| pte = pte_offset(pmd, address); | |
| printk(KERN_DEBUG "pte entry %p: %016Lx\n", | |
| pte, (long long) pte_val(*pte)); | |
| if (!pte_present(*pte)) | |
| printk(KERN_DEBUG "... pte not present!\n"); | |
| } | |
| #endif | |
| /* | |
| * This routine handles page faults. It determines the address, | |
| * and the problem, and then passes it off to one of the appropriate | |
| * routines. | |
| * | |
| * fault_code: | |
| * - LSW: either MMUFCR_IFC or MMUFCR_DFC as appropriate | |
| * - MSW: 0 if data access, 1 if instruction access | |
| * - bit 0: TLB miss flag | |
| * - bit 1: initial write | |
| * - bit 2: page invalid | |
| * - bit 3: protection violation | |
| * - bit 4: accessor (0=user 1=kernel) | |
| * - bit 5: 0=read 1=write | |
| * - bit 6-8: page protection spec | |
| * - bit 9: illegal address | |
| * - bit 16: 0=data 1=ins | |
| * | |
| */ | |
| asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long fault_code, | |
| unsigned long address) | |
| { | |
| struct vm_area_struct *vma; | |
| struct task_struct *tsk; | |
| struct mm_struct *mm; | |
| unsigned long page; | |
| siginfo_t info; | |
| int fault; | |
| unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE; | |
| #ifdef CONFIG_GDBSTUB | |
| /* handle GDB stub causing a fault */ | |
| if (gdbstub_busy) { | |
| gdbstub_exception(regs, TBR & TBR_INT_CODE); | |
| return; | |
| } | |
| #endif | |
| #if 0 | |
| printk(KERN_DEBUG "--- do_page_fault(%p,%s:%04lx,%08lx)\n", | |
| regs, | |
| fault_code & 0x10000 ? "ins" : "data", | |
| fault_code & 0xffff, address); | |
| #endif | |
| tsk = current; | |
| /* | |
| * We fault-in kernel-space virtual memory on-demand. The | |
| * 'reference' page table is init_mm.pgd. | |
| * | |
| * NOTE! We MUST NOT take any locks for this case. We may | |
| * be in an interrupt or a critical region, and should | |
| * only copy the information from the master page table, | |
| * nothing more. | |
| * | |
| * This verifies that the fault happens in kernel space | |
| * and that the fault was a page not present (invalid) error | |
| */ | |
| if (address >= VMALLOC_START && address < VMALLOC_END && | |
| (fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_SR && | |
| (fault_code & MMUFCR_xFC_PGINVAL) == MMUFCR_xFC_PGINVAL | |
| ) | |
| goto vmalloc_fault; | |
| mm = tsk->mm; | |
| info.si_code = SEGV_MAPERR; | |
| /* | |
| * If we're in an interrupt or have no user | |
| * context, we must not take the fault.. | |
| */ | |
| if (faulthandler_disabled() || !mm) | |
| goto no_context; | |
| if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_USR) | |
| flags |= FAULT_FLAG_USER; | |
| retry: | |
| down_read(&mm->mmap_sem); | |
| vma = find_vma(mm, address); | |
| if (!vma) | |
| goto bad_area; | |
| if (vma->vm_start <= address) | |
| goto good_area; | |
| if (!(vma->vm_flags & VM_GROWSDOWN)) | |
| goto bad_area; | |
| if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_USR) { | |
| /* accessing the stack below the stack pointer is always a | |
| * bug */ | |
| if ((address & PAGE_MASK) + 2 * PAGE_SIZE < regs->sp) { | |
| #if 0 | |
| printk(KERN_WARNING | |
| "[%d] ### Access below stack @%lx (sp=%lx)\n", | |
| current->pid, address, regs->sp); | |
| printk(KERN_WARNING | |
| "vma [%08x - %08x]\n", | |
| vma->vm_start, vma->vm_end); | |
| show_registers(regs); | |
| printk(KERN_WARNING | |
| "[%d] ### Code: [%08lx]" | |
| " %02x %02x %02x %02x %02x %02x %02x %02x\n", | |
| current->pid, | |
| regs->pc, | |
| ((u8 *) regs->pc)[0], | |
| ((u8 *) regs->pc)[1], | |
| ((u8 *) regs->pc)[2], | |
| ((u8 *) regs->pc)[3], | |
| ((u8 *) regs->pc)[4], | |
| ((u8 *) regs->pc)[5], | |
| ((u8 *) regs->pc)[6], | |
| ((u8 *) regs->pc)[7] | |
| ); | |
| #endif | |
| goto bad_area; | |
| } | |
| } | |
| if (expand_stack(vma, address)) | |
| goto bad_area; | |
| /* | |
| * Ok, we have a good vm_area for this memory access, so | |
| * we can handle it.. | |
| */ | |
| good_area: | |
| info.si_code = SEGV_ACCERR; | |
| switch (fault_code & (MMUFCR_xFC_PGINVAL|MMUFCR_xFC_TYPE)) { | |
| default: /* 3: write, present */ | |
| case MMUFCR_xFC_TYPE_WRITE: | |
| #ifdef TEST_VERIFY_AREA | |
| if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_SR) | |
| printk(KERN_DEBUG "WP fault at %08lx\n", regs->pc); | |
| #endif | |
| /* write to absent page */ | |
| case MMUFCR_xFC_PGINVAL | MMUFCR_xFC_TYPE_WRITE: | |
| if (!(vma->vm_flags & VM_WRITE)) | |
| goto bad_area; | |
| flags |= FAULT_FLAG_WRITE; | |
| break; | |
| /* read from protected page */ | |
| case MMUFCR_xFC_TYPE_READ: | |
| goto bad_area; | |
| /* read from absent page present */ | |
| case MMUFCR_xFC_PGINVAL | MMUFCR_xFC_TYPE_READ: | |
| if (!(vma->vm_flags & (VM_READ | VM_EXEC))) | |
| goto bad_area; | |
| break; | |
| } | |
| /* | |
| * If for any reason at all we couldn't handle the fault, | |
| * make sure we exit gracefully rather than endlessly redo | |
| * the fault. | |
| */ | |
| fault = handle_mm_fault(vma, address, flags); | |
| if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current)) | |
| return; | |
| if (unlikely(fault & VM_FAULT_ERROR)) { | |
| if (fault & VM_FAULT_OOM) | |
| goto out_of_memory; | |
| else if (fault & VM_FAULT_SIGSEGV) | |
| goto bad_area; | |
| else if (fault & VM_FAULT_SIGBUS) | |
| goto do_sigbus; | |
| BUG(); | |
| } | |
| if (flags & FAULT_FLAG_ALLOW_RETRY) { | |
| if (fault & VM_FAULT_MAJOR) | |
| current->maj_flt++; | |
| else | |
| current->min_flt++; | |
| if (fault & VM_FAULT_RETRY) { | |
| flags &= ~FAULT_FLAG_ALLOW_RETRY; | |
| /* No need to up_read(&mm->mmap_sem) as we would | |
| * have already released it in __lock_page_or_retry | |
| * in mm/filemap.c. | |
| */ | |
| goto retry; | |
| } | |
| } | |
| up_read(&mm->mmap_sem); | |
| return; | |
| /* | |
| * Something tried to access memory that isn't in our memory map.. | |
| * Fix it, but check if it's kernel or user first.. | |
| */ | |
| bad_area: | |
| up_read(&mm->mmap_sem); | |
| /* User mode accesses just cause a SIGSEGV */ | |
| if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_USR) { | |
| info.si_signo = SIGSEGV; | |
| info.si_errno = 0; | |
| /* info.si_code has been set above */ | |
| info.si_addr = (void *)address; | |
| force_sig_info(SIGSEGV, &info, tsk); | |
| return; | |
| } | |
| no_context: | |
| /* Are we prepared to handle this kernel fault? */ | |
| if (fixup_exception(regs)) | |
| return; | |
| /* | |
| * Oops. The kernel tried to access some bad page. We'll have to | |
| * terminate things with extreme prejudice. | |
| */ | |
| bust_spinlocks(1); | |
| if (address < PAGE_SIZE) | |
| printk(KERN_ALERT | |
| "Unable to handle kernel NULL pointer dereference"); | |
| else | |
| printk(KERN_ALERT | |
| "Unable to handle kernel paging request"); | |
| printk(" at virtual address %08lx\n", address); | |
| printk(" printing pc:\n"); | |
| printk(KERN_ALERT "%08lx\n", regs->pc); | |
| debugger_intercept(fault_code & 0x00010000 ? EXCEP_IAERROR : EXCEP_DAERROR, | |
| SIGSEGV, SEGV_ACCERR, regs); | |
| page = PTBR; | |
| page = ((unsigned long *) __va(page))[address >> 22]; | |
| printk(KERN_ALERT "*pde = %08lx\n", page); | |
| if (page & 1) { | |
| page &= PAGE_MASK; | |
| address &= 0x003ff000; | |
| page = ((unsigned long *) __va(page))[address >> PAGE_SHIFT]; | |
| printk(KERN_ALERT "*pte = %08lx\n", page); | |
| } | |
| die("Oops", regs, fault_code); | |
| do_exit(SIGKILL); | |
| /* | |
| * We ran out of memory, or some other thing happened to us that made | |
| * us unable to handle the page fault gracefully. | |
| */ | |
| out_of_memory: | |
| up_read(&mm->mmap_sem); | |
| if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_USR) { | |
| pagefault_out_of_memory(); | |
| return; | |
| } | |
| goto no_context; | |
| do_sigbus: | |
| up_read(&mm->mmap_sem); | |
| /* | |
| * Send a sigbus, regardless of whether we were in kernel | |
| * or user mode. | |
| */ | |
| info.si_signo = SIGBUS; | |
| info.si_errno = 0; | |
| info.si_code = BUS_ADRERR; | |
| info.si_addr = (void *)address; | |
| force_sig_info(SIGBUS, &info, tsk); | |
| /* Kernel mode? Handle exceptions or die */ | |
| if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_SR) | |
| goto no_context; | |
| return; | |
| vmalloc_fault: | |
| { | |
| /* | |
| * Synchronize this task's top level page-table | |
| * with the 'reference' page table. | |
| * | |
| * Do _not_ use "tsk" here. We might be inside | |
| * an interrupt in the middle of a task switch.. | |
| */ | |
| int index = pgd_index(address); | |
| pgd_t *pgd, *pgd_k; | |
| pud_t *pud, *pud_k; | |
| pmd_t *pmd, *pmd_k; | |
| pte_t *pte_k; | |
| pgd_k = init_mm.pgd + index; | |
| if (!pgd_present(*pgd_k)) | |
| goto no_context; | |
| pud_k = pud_offset(pgd_k, address); | |
| if (!pud_present(*pud_k)) | |
| goto no_context; | |
| pmd_k = pmd_offset(pud_k, address); | |
| if (!pmd_present(*pmd_k)) | |
| goto no_context; | |
| pgd = (pgd_t *) PTBR + index; | |
| pud = pud_offset(pgd, address); | |
| pmd = pmd_offset(pud, address); | |
| set_pmd(pmd, *pmd_k); | |
| pte_k = pte_offset_kernel(pmd_k, address); | |
| if (!pte_present(*pte_k)) | |
| goto no_context; | |
| return; | |
| } | |
| } |