| /******************************************************************************* | |
| * | |
| * Module Name: utresdecode - Resource descriptor keyword strings | |
| * | |
| ******************************************************************************/ | |
| /* | |
| * Copyright (C) 2000 - 2017, Intel Corp. | |
| * All rights reserved. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions | |
| * are met: | |
| * 1. Redistributions of source code must retain the above copyright | |
| * notice, this list of conditions, and the following disclaimer, | |
| * without modification. | |
| * 2. Redistributions in binary form must reproduce at minimum a disclaimer | |
| * substantially similar to the "NO WARRANTY" disclaimer below | |
| * ("Disclaimer") and any redistribution must be conditioned upon | |
| * including a substantially similar Disclaimer requirement for further | |
| * binary redistribution. | |
| * 3. Neither the names of the above-listed copyright holders nor the names | |
| * of any contributors may be used to endorse or promote products derived | |
| * from this software without specific prior written permission. | |
| * | |
| * Alternatively, this software may be distributed under the terms of the | |
| * GNU General Public License ("GPL") version 2 as published by the Free | |
| * Software Foundation. | |
| * | |
| * NO WARRANTY | |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR | |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | |
| * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS | |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, | |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING | |
| * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | |
| * POSSIBILITY OF SUCH DAMAGES. | |
| */ | |
| #include <acpi/acpi.h> | |
| #include "accommon.h" | |
| #include "acresrc.h" | |
| #define _COMPONENT ACPI_UTILITIES | |
| ACPI_MODULE_NAME("utresdecode") | |
| #if defined (ACPI_DEBUG_OUTPUT) || \ | |
| defined (ACPI_DISASSEMBLER) || \ | |
| defined (ACPI_DEBUGGER) | |
| /* | |
| * Strings used to decode resource descriptors. | |
| * Used by both the disassembler and the debugger resource dump routines | |
| */ | |
| const char *acpi_gbl_bm_decode[] = { | |
| "NotBusMaster", | |
| "BusMaster" | |
| }; | |
| const char *acpi_gbl_config_decode[] = { | |
| "0 - Good Configuration", | |
| "1 - Acceptable Configuration", | |
| "2 - Suboptimal Configuration", | |
| "3 - ***Invalid Configuration***", | |
| }; | |
| const char *acpi_gbl_consume_decode[] = { | |
| "ResourceProducer", | |
| "ResourceConsumer" | |
| }; | |
| const char *acpi_gbl_dec_decode[] = { | |
| "PosDecode", | |
| "SubDecode" | |
| }; | |
| const char *acpi_gbl_he_decode[] = { | |
| "Level", | |
| "Edge" | |
| }; | |
| const char *acpi_gbl_io_decode[] = { | |
| "Decode10", | |
| "Decode16" | |
| }; | |
| const char *acpi_gbl_ll_decode[] = { | |
| "ActiveHigh", | |
| "ActiveLow", | |
| "ActiveBoth", | |
| "Reserved" | |
| }; | |
| const char *acpi_gbl_max_decode[] = { | |
| "MaxNotFixed", | |
| "MaxFixed" | |
| }; | |
| const char *acpi_gbl_mem_decode[] = { | |
| "NonCacheable", | |
| "Cacheable", | |
| "WriteCombining", | |
| "Prefetchable" | |
| }; | |
| const char *acpi_gbl_min_decode[] = { | |
| "MinNotFixed", | |
| "MinFixed" | |
| }; | |
| const char *acpi_gbl_mtp_decode[] = { | |
| "AddressRangeMemory", | |
| "AddressRangeReserved", | |
| "AddressRangeACPI", | |
| "AddressRangeNVS" | |
| }; | |
| const char *acpi_gbl_rng_decode[] = { | |
| "InvalidRanges", | |
| "NonISAOnlyRanges", | |
| "ISAOnlyRanges", | |
| "EntireRange" | |
| }; | |
| const char *acpi_gbl_rw_decode[] = { | |
| "ReadOnly", | |
| "ReadWrite" | |
| }; | |
| const char *acpi_gbl_shr_decode[] = { | |
| "Exclusive", | |
| "Shared", | |
| "ExclusiveAndWake", /* ACPI 5.0 */ | |
| "SharedAndWake" /* ACPI 5.0 */ | |
| }; | |
| const char *acpi_gbl_siz_decode[] = { | |
| "Transfer8", | |
| "Transfer8_16", | |
| "Transfer16", | |
| "InvalidSize" | |
| }; | |
| const char *acpi_gbl_trs_decode[] = { | |
| "DenseTranslation", | |
| "SparseTranslation" | |
| }; | |
| const char *acpi_gbl_ttp_decode[] = { | |
| "TypeStatic", | |
| "TypeTranslation" | |
| }; | |
| const char *acpi_gbl_typ_decode[] = { | |
| "Compatibility", | |
| "TypeA", | |
| "TypeB", | |
| "TypeF" | |
| }; | |
| const char *acpi_gbl_ppc_decode[] = { | |
| "PullDefault", | |
| "PullUp", | |
| "PullDown", | |
| "PullNone" | |
| }; | |
| const char *acpi_gbl_ior_decode[] = { | |
| "IoRestrictionNone", | |
| "IoRestrictionInputOnly", | |
| "IoRestrictionOutputOnly", | |
| "IoRestrictionNoneAndPreserve" | |
| }; | |
| const char *acpi_gbl_dts_decode[] = { | |
| "Width8bit", | |
| "Width16bit", | |
| "Width32bit", | |
| "Width64bit", | |
| "Width128bit", | |
| "Width256bit", | |
| }; | |
| /* GPIO connection type */ | |
| const char *acpi_gbl_ct_decode[] = { | |
| "Interrupt", | |
| "I/O" | |
| }; | |
| /* Serial bus type */ | |
| const char *acpi_gbl_sbt_decode[] = { | |
| "/* UNKNOWN serial bus type */", | |
| "I2C", | |
| "SPI", | |
| "UART" | |
| }; | |
| /* I2C serial bus access mode */ | |
| const char *acpi_gbl_am_decode[] = { | |
| "AddressingMode7Bit", | |
| "AddressingMode10Bit" | |
| }; | |
| /* I2C serial bus slave mode */ | |
| const char *acpi_gbl_sm_decode[] = { | |
| "ControllerInitiated", | |
| "DeviceInitiated" | |
| }; | |
| /* SPI serial bus wire mode */ | |
| const char *acpi_gbl_wm_decode[] = { | |
| "FourWireMode", | |
| "ThreeWireMode" | |
| }; | |
| /* SPI serial clock phase */ | |
| const char *acpi_gbl_cph_decode[] = { | |
| "ClockPhaseFirst", | |
| "ClockPhaseSecond" | |
| }; | |
| /* SPI serial bus clock polarity */ | |
| const char *acpi_gbl_cpo_decode[] = { | |
| "ClockPolarityLow", | |
| "ClockPolarityHigh" | |
| }; | |
| /* SPI serial bus device polarity */ | |
| const char *acpi_gbl_dp_decode[] = { | |
| "PolarityLow", | |
| "PolarityHigh" | |
| }; | |
| /* UART serial bus endian */ | |
| const char *acpi_gbl_ed_decode[] = { | |
| "LittleEndian", | |
| "BigEndian" | |
| }; | |
| /* UART serial bus bits per byte */ | |
| const char *acpi_gbl_bpb_decode[] = { | |
| "DataBitsFive", | |
| "DataBitsSix", | |
| "DataBitsSeven", | |
| "DataBitsEight", | |
| "DataBitsNine", | |
| "/* UNKNOWN Bits per byte */", | |
| "/* UNKNOWN Bits per byte */", | |
| "/* UNKNOWN Bits per byte */" | |
| }; | |
| /* UART serial bus stop bits */ | |
| const char *acpi_gbl_sb_decode[] = { | |
| "StopBitsZero", | |
| "StopBitsOne", | |
| "StopBitsOnePlusHalf", | |
| "StopBitsTwo" | |
| }; | |
| /* UART serial bus flow control */ | |
| const char *acpi_gbl_fc_decode[] = { | |
| "FlowControlNone", | |
| "FlowControlHardware", | |
| "FlowControlXON", | |
| "/* UNKNOWN flow control keyword */" | |
| }; | |
| /* UART serial bus parity type */ | |
| const char *acpi_gbl_pt_decode[] = { | |
| "ParityTypeNone", | |
| "ParityTypeEven", | |
| "ParityTypeOdd", | |
| "ParityTypeMark", | |
| "ParityTypeSpace", | |
| "/* UNKNOWN parity keyword */", | |
| "/* UNKNOWN parity keyword */", | |
| "/* UNKNOWN parity keyword */" | |
| }; | |
| /* pin_config type */ | |
| const char *acpi_gbl_ptyp_decode[] = { | |
| "Default", | |
| "Bias Pull-up", | |
| "Bias Pull-down", | |
| "Bias Default", | |
| "Bias Disable", | |
| "Bias High Impedance", | |
| "Bias Bus Hold", | |
| "Drive Open Drain", | |
| "Drive Open Source", | |
| "Drive Push Pull", | |
| "Drive Strength", | |
| "Slew Rate", | |
| "Input Debounce", | |
| "Input Schmitt Trigger", | |
| }; | |
| #endif |