| /* | |
| * Copyright (C) 2005, 2006 IBM Corporation | |
| * Copyright (C) 2014, 2015 Intel Corporation | |
| * | |
| * Authors: | |
| * Leendert van Doorn <leendert@watson.ibm.com> | |
| * Kylene Hall <kjhall@us.ibm.com> | |
| * | |
| * Maintained by: <tpmdd-devel@lists.sourceforge.net> | |
| * | |
| * Device driver for TCG/TCPA TPM (trusted platform module). | |
| * Specifications at www.trustedcomputinggroup.org | |
| * | |
| * This device driver implements the TPM interface as defined in | |
| * the TCG TPM Interface Spec version 1.2, revision 1.0. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation, version 2 of the | |
| * License. | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/module.h> | |
| #include <linux/moduleparam.h> | |
| #include <linux/pnp.h> | |
| #include <linux/slab.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/wait.h> | |
| #include <linux/acpi.h> | |
| #include <linux/freezer.h> | |
| #include "tpm.h" | |
| #include "tpm_tis_core.h" | |
| /* Before we attempt to access the TPM we must see that the valid bit is set. | |
| * The specification says that this bit is 0 at reset and remains 0 until the | |
| * 'TPM has gone through its self test and initialization and has established | |
| * correct values in the other bits.' | |
| */ | |
| static int wait_startup(struct tpm_chip *chip, int l) | |
| { | |
| struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev); | |
| unsigned long stop = jiffies + chip->timeout_a; | |
| do { | |
| int rc; | |
| u8 access; | |
| rc = tpm_tis_read8(priv, TPM_ACCESS(l), &access); | |
| if (rc < 0) | |
| return rc; | |
| if (access & TPM_ACCESS_VALID) | |
| return 0; | |
| tpm_msleep(TPM_TIMEOUT); | |
| } while (time_before(jiffies, stop)); | |
| return -1; | |
| } | |
| static bool check_locality(struct tpm_chip *chip, int l) | |
| { | |
| struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev); | |
| int rc; | |
| u8 access; | |
| rc = tpm_tis_read8(priv, TPM_ACCESS(l), &access); | |
| if (rc < 0) | |
| return false; | |
| if ((access & (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) == | |
| (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) { | |
| priv->locality = l; | |
| return true; | |
| } | |
| return false; | |
| } | |
| static void release_locality(struct tpm_chip *chip, int l) | |
| { | |
| struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev); | |
| tpm_tis_write8(priv, TPM_ACCESS(l), TPM_ACCESS_ACTIVE_LOCALITY); | |
| } | |
| static int request_locality(struct tpm_chip *chip, int l) | |
| { | |
| struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev); | |
| unsigned long stop, timeout; | |
| long rc; | |
| if (check_locality(chip, l)) | |
| return l; | |
| rc = tpm_tis_write8(priv, TPM_ACCESS(l), TPM_ACCESS_REQUEST_USE); | |
| if (rc < 0) | |
| return rc; | |
| stop = jiffies + chip->timeout_a; | |
| if (chip->flags & TPM_CHIP_FLAG_IRQ) { | |
| again: | |
| timeout = stop - jiffies; | |
| if ((long)timeout <= 0) | |
| return -1; | |
| rc = wait_event_interruptible_timeout(priv->int_queue, | |
| (check_locality | |
| (chip, l)), | |
| timeout); | |
| if (rc > 0) | |
| return l; | |
| if (rc == -ERESTARTSYS && freezing(current)) { | |
| clear_thread_flag(TIF_SIGPENDING); | |
| goto again; | |
| } | |
| } else { | |
| /* wait for burstcount */ | |
| do { | |
| if (check_locality(chip, l)) | |
| return l; | |
| tpm_msleep(TPM_TIMEOUT); | |
| } while (time_before(jiffies, stop)); | |
| } | |
| return -1; | |
| } | |
| static u8 tpm_tis_status(struct tpm_chip *chip) | |
| { | |
| struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev); | |
| int rc; | |
| u8 status; | |
| rc = tpm_tis_read8(priv, TPM_STS(priv->locality), &status); | |
| if (rc < 0) | |
| return 0; | |
| return status; | |
| } | |
| static void tpm_tis_ready(struct tpm_chip *chip) | |
| { | |
| struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev); | |
| /* this causes the current command to be aborted */ | |
| tpm_tis_write8(priv, TPM_STS(priv->locality), TPM_STS_COMMAND_READY); | |
| } | |
| static int get_burstcount(struct tpm_chip *chip) | |
| { | |
| struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev); | |
| unsigned long stop; | |
| int burstcnt, rc; | |
| u32 value; | |
| /* wait for burstcount */ | |
| if (chip->flags & TPM_CHIP_FLAG_TPM2) | |
| stop = jiffies + chip->timeout_a; | |
| else | |
| stop = jiffies + chip->timeout_d; | |
| do { | |
| rc = tpm_tis_read32(priv, TPM_STS(priv->locality), &value); | |
| if (rc < 0) | |
| return rc; | |
| burstcnt = (value >> 8) & 0xFFFF; | |
| if (burstcnt) | |
| return burstcnt; | |
| tpm_msleep(TPM_TIMEOUT); | |
| } while (time_before(jiffies, stop)); | |
| return -EBUSY; | |
| } | |
| static int recv_data(struct tpm_chip *chip, u8 *buf, size_t count) | |
| { | |
| struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev); | |
| int size = 0, burstcnt, rc; | |
| while (size < count) { | |
| rc = wait_for_tpm_stat(chip, | |
| TPM_STS_DATA_AVAIL | TPM_STS_VALID, | |
| chip->timeout_c, | |
| &priv->read_queue, true); | |
| if (rc < 0) | |
| return rc; | |
| burstcnt = get_burstcount(chip); | |
| if (burstcnt < 0) { | |
| dev_err(&chip->dev, "Unable to read burstcount\n"); | |
| return burstcnt; | |
| } | |
| burstcnt = min_t(int, burstcnt, count - size); | |
| rc = tpm_tis_read_bytes(priv, TPM_DATA_FIFO(priv->locality), | |
| burstcnt, buf + size); | |
| if (rc < 0) | |
| return rc; | |
| size += burstcnt; | |
| } | |
| return size; | |
| } | |
| static int tpm_tis_recv(struct tpm_chip *chip, u8 *buf, size_t count) | |
| { | |
| struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev); | |
| int size = 0; | |
| int expected, status; | |
| if (count < TPM_HEADER_SIZE) { | |
| size = -EIO; | |
| goto out; | |
| } | |
| size = recv_data(chip, buf, TPM_HEADER_SIZE); | |
| /* read first 10 bytes, including tag, paramsize, and result */ | |
| if (size < TPM_HEADER_SIZE) { | |
| dev_err(&chip->dev, "Unable to read header\n"); | |
| goto out; | |
| } | |
| expected = be32_to_cpu(*(__be32 *) (buf + 2)); | |
| if (expected > count) { | |
| size = -EIO; | |
| goto out; | |
| } | |
| size += recv_data(chip, &buf[TPM_HEADER_SIZE], | |
| expected - TPM_HEADER_SIZE); | |
| if (size < expected) { | |
| dev_err(&chip->dev, "Unable to read remainder of result\n"); | |
| size = -ETIME; | |
| goto out; | |
| } | |
| if (wait_for_tpm_stat(chip, TPM_STS_VALID, chip->timeout_c, | |
| &priv->int_queue, false) < 0) { | |
| size = -ETIME; | |
| goto out; | |
| } | |
| status = tpm_tis_status(chip); | |
| if (status & TPM_STS_DATA_AVAIL) { /* retry? */ | |
| dev_err(&chip->dev, "Error left over data\n"); | |
| size = -EIO; | |
| goto out; | |
| } | |
| out: | |
| tpm_tis_ready(chip); | |
| return size; | |
| } | |
| /* | |
| * If interrupts are used (signaled by an irq set in the vendor structure) | |
| * tpm.c can skip polling for the data to be available as the interrupt is | |
| * waited for here | |
| */ | |
| static int tpm_tis_send_data(struct tpm_chip *chip, u8 *buf, size_t len) | |
| { | |
| struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev); | |
| int rc, status, burstcnt; | |
| size_t count = 0; | |
| bool itpm = priv->flags & TPM_TIS_ITPM_WORKAROUND; | |
| status = tpm_tis_status(chip); | |
| if ((status & TPM_STS_COMMAND_READY) == 0) { | |
| tpm_tis_ready(chip); | |
| if (wait_for_tpm_stat | |
| (chip, TPM_STS_COMMAND_READY, chip->timeout_b, | |
| &priv->int_queue, false) < 0) { | |
| rc = -ETIME; | |
| goto out_err; | |
| } | |
| } | |
| while (count < len - 1) { | |
| burstcnt = get_burstcount(chip); | |
| if (burstcnt < 0) { | |
| dev_err(&chip->dev, "Unable to read burstcount\n"); | |
| rc = burstcnt; | |
| goto out_err; | |
| } | |
| burstcnt = min_t(int, burstcnt, len - count - 1); | |
| rc = tpm_tis_write_bytes(priv, TPM_DATA_FIFO(priv->locality), | |
| burstcnt, buf + count); | |
| if (rc < 0) | |
| goto out_err; | |
| count += burstcnt; | |
| if (wait_for_tpm_stat(chip, TPM_STS_VALID, chip->timeout_c, | |
| &priv->int_queue, false) < 0) { | |
| rc = -ETIME; | |
| goto out_err; | |
| } | |
| status = tpm_tis_status(chip); | |
| if (!itpm && (status & TPM_STS_DATA_EXPECT) == 0) { | |
| rc = -EIO; | |
| goto out_err; | |
| } | |
| } | |
| /* write last byte */ | |
| rc = tpm_tis_write8(priv, TPM_DATA_FIFO(priv->locality), buf[count]); | |
| if (rc < 0) | |
| goto out_err; | |
| if (wait_for_tpm_stat(chip, TPM_STS_VALID, chip->timeout_c, | |
| &priv->int_queue, false) < 0) { | |
| rc = -ETIME; | |
| goto out_err; | |
| } | |
| status = tpm_tis_status(chip); | |
| if (!itpm && (status & TPM_STS_DATA_EXPECT) != 0) { | |
| rc = -EIO; | |
| goto out_err; | |
| } | |
| return 0; | |
| out_err: | |
| tpm_tis_ready(chip); | |
| return rc; | |
| } | |
| static void disable_interrupts(struct tpm_chip *chip) | |
| { | |
| struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev); | |
| u32 intmask; | |
| int rc; | |
| rc = tpm_tis_read32(priv, TPM_INT_ENABLE(priv->locality), &intmask); | |
| if (rc < 0) | |
| intmask = 0; | |
| intmask &= ~TPM_GLOBAL_INT_ENABLE; | |
| rc = tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality), intmask); | |
| devm_free_irq(chip->dev.parent, priv->irq, chip); | |
| priv->irq = 0; | |
| chip->flags &= ~TPM_CHIP_FLAG_IRQ; | |
| } | |
| /* | |
| * If interrupts are used (signaled by an irq set in the vendor structure) | |
| * tpm.c can skip polling for the data to be available as the interrupt is | |
| * waited for here | |
| */ | |
| static int tpm_tis_send_main(struct tpm_chip *chip, u8 *buf, size_t len) | |
| { | |
| struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev); | |
| int rc; | |
| u32 ordinal; | |
| unsigned long dur; | |
| rc = tpm_tis_send_data(chip, buf, len); | |
| if (rc < 0) | |
| return rc; | |
| /* go and do it */ | |
| rc = tpm_tis_write8(priv, TPM_STS(priv->locality), TPM_STS_GO); | |
| if (rc < 0) | |
| goto out_err; | |
| if (chip->flags & TPM_CHIP_FLAG_IRQ) { | |
| ordinal = be32_to_cpu(*((__be32 *) (buf + 6))); | |
| if (chip->flags & TPM_CHIP_FLAG_TPM2) | |
| dur = tpm2_calc_ordinal_duration(chip, ordinal); | |
| else | |
| dur = tpm_calc_ordinal_duration(chip, ordinal); | |
| if (wait_for_tpm_stat | |
| (chip, TPM_STS_DATA_AVAIL | TPM_STS_VALID, dur, | |
| &priv->read_queue, false) < 0) { | |
| rc = -ETIME; | |
| goto out_err; | |
| } | |
| } | |
| return len; | |
| out_err: | |
| tpm_tis_ready(chip); | |
| return rc; | |
| } | |
| static int tpm_tis_send(struct tpm_chip *chip, u8 *buf, size_t len) | |
| { | |
| int rc, irq; | |
| struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev); | |
| if (!(chip->flags & TPM_CHIP_FLAG_IRQ) || priv->irq_tested) | |
| return tpm_tis_send_main(chip, buf, len); | |
| /* Verify receipt of the expected IRQ */ | |
| irq = priv->irq; | |
| priv->irq = 0; | |
| chip->flags &= ~TPM_CHIP_FLAG_IRQ; | |
| rc = tpm_tis_send_main(chip, buf, len); | |
| priv->irq = irq; | |
| chip->flags |= TPM_CHIP_FLAG_IRQ; | |
| if (!priv->irq_tested) | |
| tpm_msleep(1); | |
| if (!priv->irq_tested) | |
| disable_interrupts(chip); | |
| priv->irq_tested = true; | |
| return rc; | |
| } | |
| struct tis_vendor_timeout_override { | |
| u32 did_vid; | |
| unsigned long timeout_us[4]; | |
| }; | |
| static const struct tis_vendor_timeout_override vendor_timeout_overrides[] = { | |
| /* Atmel 3204 */ | |
| { 0x32041114, { (TIS_SHORT_TIMEOUT*1000), (TIS_LONG_TIMEOUT*1000), | |
| (TIS_SHORT_TIMEOUT*1000), (TIS_SHORT_TIMEOUT*1000) } }, | |
| }; | |
| static bool tpm_tis_update_timeouts(struct tpm_chip *chip, | |
| unsigned long *timeout_cap) | |
| { | |
| struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev); | |
| int i, rc; | |
| u32 did_vid; | |
| rc = tpm_tis_read32(priv, TPM_DID_VID(0), &did_vid); | |
| if (rc < 0) | |
| return rc; | |
| for (i = 0; i != ARRAY_SIZE(vendor_timeout_overrides); i++) { | |
| if (vendor_timeout_overrides[i].did_vid != did_vid) | |
| continue; | |
| memcpy(timeout_cap, vendor_timeout_overrides[i].timeout_us, | |
| sizeof(vendor_timeout_overrides[i].timeout_us)); | |
| return true; | |
| } | |
| return false; | |
| } | |
| /* | |
| * Early probing for iTPM with STS_DATA_EXPECT flaw. | |
| * Try sending command without itpm flag set and if that | |
| * fails, repeat with itpm flag set. | |
| */ | |
| static int probe_itpm(struct tpm_chip *chip) | |
| { | |
| struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev); | |
| int rc = 0; | |
| u8 cmd_getticks[] = { | |
| 0x00, 0xc1, 0x00, 0x00, 0x00, 0x0a, | |
| 0x00, 0x00, 0x00, 0xf1 | |
| }; | |
| size_t len = sizeof(cmd_getticks); | |
| u16 vendor; | |
| if (priv->flags & TPM_TIS_ITPM_WORKAROUND) | |
| return 0; | |
| rc = tpm_tis_read16(priv, TPM_DID_VID(0), &vendor); | |
| if (rc < 0) | |
| return rc; | |
| /* probe only iTPMS */ | |
| if (vendor != TPM_VID_INTEL) | |
| return 0; | |
| if (request_locality(chip, 0) != 0) | |
| return -EBUSY; | |
| rc = tpm_tis_send_data(chip, cmd_getticks, len); | |
| if (rc == 0) | |
| goto out; | |
| tpm_tis_ready(chip); | |
| priv->flags |= TPM_TIS_ITPM_WORKAROUND; | |
| rc = tpm_tis_send_data(chip, cmd_getticks, len); | |
| if (rc == 0) | |
| dev_info(&chip->dev, "Detected an iTPM.\n"); | |
| else { | |
| priv->flags &= ~TPM_TIS_ITPM_WORKAROUND; | |
| rc = -EFAULT; | |
| } | |
| out: | |
| tpm_tis_ready(chip); | |
| release_locality(chip, priv->locality); | |
| return rc; | |
| } | |
| static bool tpm_tis_req_canceled(struct tpm_chip *chip, u8 status) | |
| { | |
| struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev); | |
| switch (priv->manufacturer_id) { | |
| case TPM_VID_WINBOND: | |
| return ((status == TPM_STS_VALID) || | |
| (status == (TPM_STS_VALID | TPM_STS_COMMAND_READY))); | |
| case TPM_VID_STM: | |
| return (status == (TPM_STS_VALID | TPM_STS_COMMAND_READY)); | |
| default: | |
| return (status == TPM_STS_COMMAND_READY); | |
| } | |
| } | |
| static irqreturn_t tis_int_handler(int dummy, void *dev_id) | |
| { | |
| struct tpm_chip *chip = dev_id; | |
| struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev); | |
| u32 interrupt; | |
| int i, rc; | |
| rc = tpm_tis_read32(priv, TPM_INT_STATUS(priv->locality), &interrupt); | |
| if (rc < 0) | |
| return IRQ_NONE; | |
| if (interrupt == 0) | |
| return IRQ_NONE; | |
| priv->irq_tested = true; | |
| if (interrupt & TPM_INTF_DATA_AVAIL_INT) | |
| wake_up_interruptible(&priv->read_queue); | |
| if (interrupt & TPM_INTF_LOCALITY_CHANGE_INT) | |
| for (i = 0; i < 5; i++) | |
| if (check_locality(chip, i)) | |
| break; | |
| if (interrupt & | |
| (TPM_INTF_LOCALITY_CHANGE_INT | TPM_INTF_STS_VALID_INT | | |
| TPM_INTF_CMD_READY_INT)) | |
| wake_up_interruptible(&priv->int_queue); | |
| /* Clear interrupts handled with TPM_EOI */ | |
| rc = tpm_tis_write32(priv, TPM_INT_STATUS(priv->locality), interrupt); | |
| if (rc < 0) | |
| return IRQ_NONE; | |
| tpm_tis_read32(priv, TPM_INT_STATUS(priv->locality), &interrupt); | |
| return IRQ_HANDLED; | |
| } | |
| static int tpm_tis_gen_interrupt(struct tpm_chip *chip) | |
| { | |
| const char *desc = "attempting to generate an interrupt"; | |
| u32 cap2; | |
| cap_t cap; | |
| if (chip->flags & TPM_CHIP_FLAG_TPM2) | |
| return tpm2_get_tpm_pt(chip, 0x100, &cap2, desc); | |
| else | |
| return tpm_getcap(chip, TPM_CAP_PROP_TIS_TIMEOUT, &cap, desc, | |
| 0); | |
| } | |
| /* Register the IRQ and issue a command that will cause an interrupt. If an | |
| * irq is seen then leave the chip setup for IRQ operation, otherwise reverse | |
| * everything and leave in polling mode. Returns 0 on success. | |
| */ | |
| static int tpm_tis_probe_irq_single(struct tpm_chip *chip, u32 intmask, | |
| int flags, int irq) | |
| { | |
| struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev); | |
| u8 original_int_vec; | |
| int rc; | |
| u32 int_status; | |
| if (devm_request_irq(chip->dev.parent, irq, tis_int_handler, flags, | |
| dev_name(&chip->dev), chip) != 0) { | |
| dev_info(&chip->dev, "Unable to request irq: %d for probe\n", | |
| irq); | |
| return -1; | |
| } | |
| priv->irq = irq; | |
| rc = tpm_tis_read8(priv, TPM_INT_VECTOR(priv->locality), | |
| &original_int_vec); | |
| if (rc < 0) | |
| return rc; | |
| rc = tpm_tis_write8(priv, TPM_INT_VECTOR(priv->locality), irq); | |
| if (rc < 0) | |
| return rc; | |
| rc = tpm_tis_read32(priv, TPM_INT_STATUS(priv->locality), &int_status); | |
| if (rc < 0) | |
| return rc; | |
| /* Clear all existing */ | |
| rc = tpm_tis_write32(priv, TPM_INT_STATUS(priv->locality), int_status); | |
| if (rc < 0) | |
| return rc; | |
| /* Turn on */ | |
| rc = tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality), | |
| intmask | TPM_GLOBAL_INT_ENABLE); | |
| if (rc < 0) | |
| return rc; | |
| priv->irq_tested = false; | |
| /* Generate an interrupt by having the core call through to | |
| * tpm_tis_send | |
| */ | |
| rc = tpm_tis_gen_interrupt(chip); | |
| if (rc < 0) | |
| return rc; | |
| /* tpm_tis_send will either confirm the interrupt is working or it | |
| * will call disable_irq which undoes all of the above. | |
| */ | |
| if (!(chip->flags & TPM_CHIP_FLAG_IRQ)) { | |
| rc = tpm_tis_write8(priv, original_int_vec, | |
| TPM_INT_VECTOR(priv->locality)); | |
| if (rc < 0) | |
| return rc; | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| /* Try to find the IRQ the TPM is using. This is for legacy x86 systems that | |
| * do not have ACPI/etc. We typically expect the interrupt to be declared if | |
| * present. | |
| */ | |
| static void tpm_tis_probe_irq(struct tpm_chip *chip, u32 intmask) | |
| { | |
| struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev); | |
| u8 original_int_vec; | |
| int i, rc; | |
| rc = tpm_tis_read8(priv, TPM_INT_VECTOR(priv->locality), | |
| &original_int_vec); | |
| if (rc < 0) | |
| return; | |
| if (!original_int_vec) { | |
| if (IS_ENABLED(CONFIG_X86)) | |
| for (i = 3; i <= 15; i++) | |
| if (!tpm_tis_probe_irq_single(chip, intmask, 0, | |
| i)) | |
| return; | |
| } else if (!tpm_tis_probe_irq_single(chip, intmask, 0, | |
| original_int_vec)) | |
| return; | |
| } | |
| void tpm_tis_remove(struct tpm_chip *chip) | |
| { | |
| struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev); | |
| u32 reg = TPM_INT_ENABLE(priv->locality); | |
| u32 interrupt; | |
| int rc; | |
| rc = tpm_tis_read32(priv, reg, &interrupt); | |
| if (rc < 0) | |
| interrupt = 0; | |
| tpm_tis_write32(priv, reg, ~TPM_GLOBAL_INT_ENABLE & interrupt); | |
| } | |
| EXPORT_SYMBOL_GPL(tpm_tis_remove); | |
| static const struct tpm_class_ops tpm_tis = { | |
| .flags = TPM_OPS_AUTO_STARTUP, | |
| .status = tpm_tis_status, | |
| .recv = tpm_tis_recv, | |
| .send = tpm_tis_send, | |
| .cancel = tpm_tis_ready, | |
| .update_timeouts = tpm_tis_update_timeouts, | |
| .req_complete_mask = TPM_STS_DATA_AVAIL | TPM_STS_VALID, | |
| .req_complete_val = TPM_STS_DATA_AVAIL | TPM_STS_VALID, | |
| .req_canceled = tpm_tis_req_canceled, | |
| .request_locality = request_locality, | |
| .relinquish_locality = release_locality, | |
| }; | |
| int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq, | |
| const struct tpm_tis_phy_ops *phy_ops, | |
| acpi_handle acpi_dev_handle) | |
| { | |
| u32 vendor, intfcaps, intmask; | |
| u8 rid; | |
| int rc, probe; | |
| struct tpm_chip *chip; | |
| chip = tpmm_chip_alloc(dev, &tpm_tis); | |
| if (IS_ERR(chip)) | |
| return PTR_ERR(chip); | |
| #ifdef CONFIG_ACPI | |
| chip->acpi_dev_handle = acpi_dev_handle; | |
| #endif | |
| /* Maximum timeouts */ | |
| chip->timeout_a = msecs_to_jiffies(TIS_TIMEOUT_A_MAX); | |
| chip->timeout_b = msecs_to_jiffies(TIS_TIMEOUT_B_MAX); | |
| chip->timeout_c = msecs_to_jiffies(TIS_TIMEOUT_C_MAX); | |
| chip->timeout_d = msecs_to_jiffies(TIS_TIMEOUT_D_MAX); | |
| priv->phy_ops = phy_ops; | |
| dev_set_drvdata(&chip->dev, priv); | |
| if (wait_startup(chip, 0) != 0) { | |
| rc = -ENODEV; | |
| goto out_err; | |
| } | |
| /* Take control of the TPM's interrupt hardware and shut it off */ | |
| rc = tpm_tis_read32(priv, TPM_INT_ENABLE(priv->locality), &intmask); | |
| if (rc < 0) | |
| goto out_err; | |
| intmask |= TPM_INTF_CMD_READY_INT | TPM_INTF_LOCALITY_CHANGE_INT | | |
| TPM_INTF_DATA_AVAIL_INT | TPM_INTF_STS_VALID_INT; | |
| intmask &= ~TPM_GLOBAL_INT_ENABLE; | |
| tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality), intmask); | |
| rc = tpm2_probe(chip); | |
| if (rc) | |
| goto out_err; | |
| rc = tpm_tis_read32(priv, TPM_DID_VID(0), &vendor); | |
| if (rc < 0) | |
| goto out_err; | |
| priv->manufacturer_id = vendor; | |
| rc = tpm_tis_read8(priv, TPM_RID(0), &rid); | |
| if (rc < 0) | |
| goto out_err; | |
| dev_info(dev, "%s TPM (device-id 0x%X, rev-id %d)\n", | |
| (chip->flags & TPM_CHIP_FLAG_TPM2) ? "2.0" : "1.2", | |
| vendor >> 16, rid); | |
| probe = probe_itpm(chip); | |
| if (probe < 0) { | |
| rc = -ENODEV; | |
| goto out_err; | |
| } | |
| /* Figure out the capabilities */ | |
| rc = tpm_tis_read32(priv, TPM_INTF_CAPS(priv->locality), &intfcaps); | |
| if (rc < 0) | |
| goto out_err; | |
| dev_dbg(dev, "TPM interface capabilities (0x%x):\n", | |
| intfcaps); | |
| if (intfcaps & TPM_INTF_BURST_COUNT_STATIC) | |
| dev_dbg(dev, "\tBurst Count Static\n"); | |
| if (intfcaps & TPM_INTF_CMD_READY_INT) | |
| dev_dbg(dev, "\tCommand Ready Int Support\n"); | |
| if (intfcaps & TPM_INTF_INT_EDGE_FALLING) | |
| dev_dbg(dev, "\tInterrupt Edge Falling\n"); | |
| if (intfcaps & TPM_INTF_INT_EDGE_RISING) | |
| dev_dbg(dev, "\tInterrupt Edge Rising\n"); | |
| if (intfcaps & TPM_INTF_INT_LEVEL_LOW) | |
| dev_dbg(dev, "\tInterrupt Level Low\n"); | |
| if (intfcaps & TPM_INTF_INT_LEVEL_HIGH) | |
| dev_dbg(dev, "\tInterrupt Level High\n"); | |
| if (intfcaps & TPM_INTF_LOCALITY_CHANGE_INT) | |
| dev_dbg(dev, "\tLocality Change Int Support\n"); | |
| if (intfcaps & TPM_INTF_STS_VALID_INT) | |
| dev_dbg(dev, "\tSts Valid Int Support\n"); | |
| if (intfcaps & TPM_INTF_DATA_AVAIL_INT) | |
| dev_dbg(dev, "\tData Avail Int Support\n"); | |
| /* INTERRUPT Setup */ | |
| init_waitqueue_head(&priv->read_queue); | |
| init_waitqueue_head(&priv->int_queue); | |
| if (irq != -1) { | |
| /* Before doing irq testing issue a command to the TPM in polling mode | |
| * to make sure it works. May as well use that command to set the | |
| * proper timeouts for the driver. | |
| */ | |
| if (tpm_get_timeouts(chip)) { | |
| dev_err(dev, "Could not get TPM timeouts and durations\n"); | |
| rc = -ENODEV; | |
| goto out_err; | |
| } | |
| if (irq) { | |
| tpm_tis_probe_irq_single(chip, intmask, IRQF_SHARED, | |
| irq); | |
| if (!(chip->flags & TPM_CHIP_FLAG_IRQ)) | |
| dev_err(&chip->dev, FW_BUG | |
| "TPM interrupt not working, polling instead\n"); | |
| } else { | |
| tpm_tis_probe_irq(chip, intmask); | |
| } | |
| } | |
| return tpm_chip_register(chip); | |
| out_err: | |
| tpm_tis_remove(chip); | |
| return rc; | |
| } | |
| EXPORT_SYMBOL_GPL(tpm_tis_core_init); | |
| #ifdef CONFIG_PM_SLEEP | |
| static void tpm_tis_reenable_interrupts(struct tpm_chip *chip) | |
| { | |
| struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev); | |
| u32 intmask; | |
| int rc; | |
| /* reenable interrupts that device may have lost or | |
| * BIOS/firmware may have disabled | |
| */ | |
| rc = tpm_tis_write8(priv, TPM_INT_VECTOR(priv->locality), priv->irq); | |
| if (rc < 0) | |
| return; | |
| rc = tpm_tis_read32(priv, TPM_INT_ENABLE(priv->locality), &intmask); | |
| if (rc < 0) | |
| return; | |
| intmask |= TPM_INTF_CMD_READY_INT | |
| | TPM_INTF_LOCALITY_CHANGE_INT | TPM_INTF_DATA_AVAIL_INT | |
| | TPM_INTF_STS_VALID_INT | TPM_GLOBAL_INT_ENABLE; | |
| tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality), intmask); | |
| } | |
| int tpm_tis_resume(struct device *dev) | |
| { | |
| struct tpm_chip *chip = dev_get_drvdata(dev); | |
| int ret; | |
| if (chip->flags & TPM_CHIP_FLAG_IRQ) | |
| tpm_tis_reenable_interrupts(chip); | |
| ret = tpm_pm_resume(dev); | |
| if (ret) | |
| return ret; | |
| /* TPM 1.2 requires self-test on resume. This function actually returns | |
| * an error code but for unknown reason it isn't handled. | |
| */ | |
| if (!(chip->flags & TPM_CHIP_FLAG_TPM2)) | |
| tpm_do_selftest(chip); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(tpm_tis_resume); | |
| #endif | |
| MODULE_AUTHOR("Leendert van Doorn (leendert@watson.ibm.com)"); | |
| MODULE_DESCRIPTION("TPM Driver"); | |
| MODULE_VERSION("2.0"); | |
| MODULE_LICENSE("GPL"); |