| /* | |
| * Cryptographic API for the NX-842 hardware compression. | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * Copyright (C) IBM Corporation, 2011-2015 | |
| * | |
| * Designer of the Power data compression engine: | |
| * Bulent Abali <abali@us.ibm.com> | |
| * | |
| * Original Authors: Robert Jennings <rcj@linux.vnet.ibm.com> | |
| * Seth Jennings <sjenning@linux.vnet.ibm.com> | |
| * | |
| * Rewrite: Dan Streetman <ddstreet@ieee.org> | |
| * | |
| * This is an interface to the NX-842 compression hardware in PowerPC | |
| * processors. Most of the complexity of this drvier is due to the fact that | |
| * the NX-842 compression hardware requires the input and output data buffers | |
| * to be specifically aligned, to be a specific multiple in length, and within | |
| * specific minimum and maximum lengths. Those restrictions, provided by the | |
| * nx-842 driver via nx842_constraints, mean this driver must use bounce | |
| * buffers and headers to correct misaligned in or out buffers, and to split | |
| * input buffers that are too large. | |
| * | |
| * This driver will fall back to software decompression if the hardware | |
| * decompression fails, so this driver's decompression should never fail as | |
| * long as the provided compressed buffer is valid. Any compressed buffer | |
| * created by this driver will have a header (except ones where the input | |
| * perfectly matches the constraints); so users of this driver cannot simply | |
| * pass a compressed buffer created by this driver over to the 842 software | |
| * decompression library. Instead, users must use this driver to decompress; | |
| * if the hardware fails or is unavailable, the compressed buffer will be | |
| * parsed and the header removed, and the raw 842 buffer(s) passed to the 842 | |
| * software decompression library. | |
| * | |
| * This does not fall back to software compression, however, since the caller | |
| * of this function is specifically requesting hardware compression; if the | |
| * hardware compression fails, the caller can fall back to software | |
| * compression, and the raw 842 compressed buffer that the software compressor | |
| * creates can be passed to this driver for hardware decompression; any | |
| * buffer without our specific header magic is assumed to be a raw 842 buffer | |
| * and passed directly to the hardware. Note that the software compression | |
| * library will produce a compressed buffer that is incompatible with the | |
| * hardware decompressor if the original input buffer length is not a multiple | |
| * of 8; if such a compressed buffer is passed to this driver for | |
| * decompression, the hardware will reject it and this driver will then pass | |
| * it over to the software library for decompression. | |
| */ | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | |
| #include <linux/vmalloc.h> | |
| #include <linux/sw842.h> | |
| #include <linux/spinlock.h> | |
| #include "nx-842.h" | |
| /* The first 5 bits of this magic are 0x1f, which is an invalid 842 5-bit | |
| * template (see lib/842/842.h), so this magic number will never appear at | |
| * the start of a raw 842 compressed buffer. That is important, as any buffer | |
| * passed to us without this magic is assumed to be a raw 842 compressed | |
| * buffer, and passed directly to the hardware to decompress. | |
| */ | |
| #define NX842_CRYPTO_MAGIC (0xf842) | |
| #define NX842_CRYPTO_HEADER_SIZE(g) \ | |
| (sizeof(struct nx842_crypto_header) + \ | |
| sizeof(struct nx842_crypto_header_group) * (g)) | |
| #define NX842_CRYPTO_HEADER_MAX_SIZE \ | |
| NX842_CRYPTO_HEADER_SIZE(NX842_CRYPTO_GROUP_MAX) | |
| /* bounce buffer size */ | |
| #define BOUNCE_BUFFER_ORDER (2) | |
| #define BOUNCE_BUFFER_SIZE \ | |
| ((unsigned int)(PAGE_SIZE << BOUNCE_BUFFER_ORDER)) | |
| /* try longer on comp because we can fallback to sw decomp if hw is busy */ | |
| #define COMP_BUSY_TIMEOUT (250) /* ms */ | |
| #define DECOMP_BUSY_TIMEOUT (50) /* ms */ | |
| struct nx842_crypto_param { | |
| u8 *in; | |
| unsigned int iremain; | |
| u8 *out; | |
| unsigned int oremain; | |
| unsigned int ototal; | |
| }; | |
| static int update_param(struct nx842_crypto_param *p, | |
| unsigned int slen, unsigned int dlen) | |
| { | |
| if (p->iremain < slen) | |
| return -EOVERFLOW; | |
| if (p->oremain < dlen) | |
| return -ENOSPC; | |
| p->in += slen; | |
| p->iremain -= slen; | |
| p->out += dlen; | |
| p->oremain -= dlen; | |
| p->ototal += dlen; | |
| return 0; | |
| } | |
| int nx842_crypto_init(struct crypto_tfm *tfm, struct nx842_driver *driver) | |
| { | |
| struct nx842_crypto_ctx *ctx = crypto_tfm_ctx(tfm); | |
| spin_lock_init(&ctx->lock); | |
| ctx->driver = driver; | |
| ctx->wmem = kzalloc(driver->workmem_size, GFP_KERNEL); | |
| ctx->sbounce = (u8 *)__get_free_pages(GFP_KERNEL, BOUNCE_BUFFER_ORDER); | |
| ctx->dbounce = (u8 *)__get_free_pages(GFP_KERNEL, BOUNCE_BUFFER_ORDER); | |
| if (!ctx->wmem || !ctx->sbounce || !ctx->dbounce) { | |
| kfree(ctx->wmem); | |
| free_page((unsigned long)ctx->sbounce); | |
| free_page((unsigned long)ctx->dbounce); | |
| return -ENOMEM; | |
| } | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(nx842_crypto_init); | |
| void nx842_crypto_exit(struct crypto_tfm *tfm) | |
| { | |
| struct nx842_crypto_ctx *ctx = crypto_tfm_ctx(tfm); | |
| kfree(ctx->wmem); | |
| free_page((unsigned long)ctx->sbounce); | |
| free_page((unsigned long)ctx->dbounce); | |
| } | |
| EXPORT_SYMBOL_GPL(nx842_crypto_exit); | |
| static void check_constraints(struct nx842_constraints *c) | |
| { | |
| /* limit maximum, to always have enough bounce buffer to decompress */ | |
| if (c->maximum > BOUNCE_BUFFER_SIZE) | |
| c->maximum = BOUNCE_BUFFER_SIZE; | |
| } | |
| static int nx842_crypto_add_header(struct nx842_crypto_header *hdr, u8 *buf) | |
| { | |
| int s = NX842_CRYPTO_HEADER_SIZE(hdr->groups); | |
| /* compress should have added space for header */ | |
| if (s > be16_to_cpu(hdr->group[0].padding)) { | |
| pr_err("Internal error: no space for header\n"); | |
| return -EINVAL; | |
| } | |
| memcpy(buf, hdr, s); | |
| print_hex_dump_debug("header ", DUMP_PREFIX_OFFSET, 16, 1, buf, s, 0); | |
| return 0; | |
| } | |
| static int compress(struct nx842_crypto_ctx *ctx, | |
| struct nx842_crypto_param *p, | |
| struct nx842_crypto_header_group *g, | |
| struct nx842_constraints *c, | |
| u16 *ignore, | |
| unsigned int hdrsize) | |
| { | |
| unsigned int slen = p->iremain, dlen = p->oremain, tmplen; | |
| unsigned int adj_slen = slen; | |
| u8 *src = p->in, *dst = p->out; | |
| int ret, dskip = 0; | |
| ktime_t timeout; | |
| if (p->iremain == 0) | |
| return -EOVERFLOW; | |
| if (p->oremain == 0 || hdrsize + c->minimum > dlen) | |
| return -ENOSPC; | |
| if (slen % c->multiple) | |
| adj_slen = round_up(slen, c->multiple); | |
| if (slen < c->minimum) | |
| adj_slen = c->minimum; | |
| if (slen > c->maximum) | |
| adj_slen = slen = c->maximum; | |
| if (adj_slen > slen || (u64)src % c->alignment) { | |
| adj_slen = min(adj_slen, BOUNCE_BUFFER_SIZE); | |
| slen = min(slen, BOUNCE_BUFFER_SIZE); | |
| if (adj_slen > slen) | |
| memset(ctx->sbounce + slen, 0, adj_slen - slen); | |
| memcpy(ctx->sbounce, src, slen); | |
| src = ctx->sbounce; | |
| slen = adj_slen; | |
| pr_debug("using comp sbounce buffer, len %x\n", slen); | |
| } | |
| dst += hdrsize; | |
| dlen -= hdrsize; | |
| if ((u64)dst % c->alignment) { | |
| dskip = (int)(PTR_ALIGN(dst, c->alignment) - dst); | |
| dst += dskip; | |
| dlen -= dskip; | |
| } | |
| if (dlen % c->multiple) | |
| dlen = round_down(dlen, c->multiple); | |
| if (dlen < c->minimum) { | |
| nospc: | |
| dst = ctx->dbounce; | |
| dlen = min(p->oremain, BOUNCE_BUFFER_SIZE); | |
| dlen = round_down(dlen, c->multiple); | |
| dskip = 0; | |
| pr_debug("using comp dbounce buffer, len %x\n", dlen); | |
| } | |
| if (dlen > c->maximum) | |
| dlen = c->maximum; | |
| tmplen = dlen; | |
| timeout = ktime_add_ms(ktime_get(), COMP_BUSY_TIMEOUT); | |
| do { | |
| dlen = tmplen; /* reset dlen, if we're retrying */ | |
| ret = ctx->driver->compress(src, slen, dst, &dlen, ctx->wmem); | |
| /* possibly we should reduce the slen here, instead of | |
| * retrying with the dbounce buffer? | |
| */ | |
| if (ret == -ENOSPC && dst != ctx->dbounce) | |
| goto nospc; | |
| } while (ret == -EBUSY && ktime_before(ktime_get(), timeout)); | |
| if (ret) | |
| return ret; | |
| dskip += hdrsize; | |
| if (dst == ctx->dbounce) | |
| memcpy(p->out + dskip, dst, dlen); | |
| g->padding = cpu_to_be16(dskip); | |
| g->compressed_length = cpu_to_be32(dlen); | |
| g->uncompressed_length = cpu_to_be32(slen); | |
| if (p->iremain < slen) { | |
| *ignore = slen - p->iremain; | |
| slen = p->iremain; | |
| } | |
| pr_debug("compress slen %x ignore %x dlen %x padding %x\n", | |
| slen, *ignore, dlen, dskip); | |
| return update_param(p, slen, dskip + dlen); | |
| } | |
| int nx842_crypto_compress(struct crypto_tfm *tfm, | |
| const u8 *src, unsigned int slen, | |
| u8 *dst, unsigned int *dlen) | |
| { | |
| struct nx842_crypto_ctx *ctx = crypto_tfm_ctx(tfm); | |
| struct nx842_crypto_header *hdr = &ctx->header; | |
| struct nx842_crypto_param p; | |
| struct nx842_constraints c = *ctx->driver->constraints; | |
| unsigned int groups, hdrsize, h; | |
| int ret, n; | |
| bool add_header; | |
| u16 ignore = 0; | |
| check_constraints(&c); | |
| p.in = (u8 *)src; | |
| p.iremain = slen; | |
| p.out = dst; | |
| p.oremain = *dlen; | |
| p.ototal = 0; | |
| *dlen = 0; | |
| groups = min_t(unsigned int, NX842_CRYPTO_GROUP_MAX, | |
| DIV_ROUND_UP(p.iremain, c.maximum)); | |
| hdrsize = NX842_CRYPTO_HEADER_SIZE(groups); | |
| spin_lock_bh(&ctx->lock); | |
| /* skip adding header if the buffers meet all constraints */ | |
| add_header = (p.iremain % c.multiple || | |
| p.iremain < c.minimum || | |
| p.iremain > c.maximum || | |
| (u64)p.in % c.alignment || | |
| p.oremain % c.multiple || | |
| p.oremain < c.minimum || | |
| p.oremain > c.maximum || | |
| (u64)p.out % c.alignment); | |
| hdr->magic = cpu_to_be16(NX842_CRYPTO_MAGIC); | |
| hdr->groups = 0; | |
| hdr->ignore = 0; | |
| while (p.iremain > 0) { | |
| n = hdr->groups++; | |
| ret = -ENOSPC; | |
| if (hdr->groups > NX842_CRYPTO_GROUP_MAX) | |
| goto unlock; | |
| /* header goes before first group */ | |
| h = !n && add_header ? hdrsize : 0; | |
| if (ignore) | |
| pr_warn("internal error, ignore is set %x\n", ignore); | |
| ret = compress(ctx, &p, &hdr->group[n], &c, &ignore, h); | |
| if (ret) | |
| goto unlock; | |
| } | |
| if (!add_header && hdr->groups > 1) { | |
| pr_err("Internal error: No header but multiple groups\n"); | |
| ret = -EINVAL; | |
| goto unlock; | |
| } | |
| /* ignore indicates the input stream needed to be padded */ | |
| hdr->ignore = cpu_to_be16(ignore); | |
| if (ignore) | |
| pr_debug("marked %d bytes as ignore\n", ignore); | |
| if (add_header) | |
| ret = nx842_crypto_add_header(hdr, dst); | |
| if (ret) | |
| goto unlock; | |
| *dlen = p.ototal; | |
| pr_debug("compress total slen %x dlen %x\n", slen, *dlen); | |
| unlock: | |
| spin_unlock_bh(&ctx->lock); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(nx842_crypto_compress); | |
| static int decompress(struct nx842_crypto_ctx *ctx, | |
| struct nx842_crypto_param *p, | |
| struct nx842_crypto_header_group *g, | |
| struct nx842_constraints *c, | |
| u16 ignore) | |
| { | |
| unsigned int slen = be32_to_cpu(g->compressed_length); | |
| unsigned int required_len = be32_to_cpu(g->uncompressed_length); | |
| unsigned int dlen = p->oremain, tmplen; | |
| unsigned int adj_slen = slen; | |
| u8 *src = p->in, *dst = p->out; | |
| u16 padding = be16_to_cpu(g->padding); | |
| int ret, spadding = 0, dpadding = 0; | |
| ktime_t timeout; | |
| if (!slen || !required_len) | |
| return -EINVAL; | |
| if (p->iremain <= 0 || padding + slen > p->iremain) | |
| return -EOVERFLOW; | |
| if (p->oremain <= 0 || required_len - ignore > p->oremain) | |
| return -ENOSPC; | |
| src += padding; | |
| if (slen % c->multiple) | |
| adj_slen = round_up(slen, c->multiple); | |
| if (slen < c->minimum) | |
| adj_slen = c->minimum; | |
| if (slen > c->maximum) | |
| goto usesw; | |
| if (slen < adj_slen || (u64)src % c->alignment) { | |
| /* we can append padding bytes because the 842 format defines | |
| * an "end" template (see lib/842/842_decompress.c) and will | |
| * ignore any bytes following it. | |
| */ | |
| if (slen < adj_slen) | |
| memset(ctx->sbounce + slen, 0, adj_slen - slen); | |
| memcpy(ctx->sbounce, src, slen); | |
| src = ctx->sbounce; | |
| spadding = adj_slen - slen; | |
| slen = adj_slen; | |
| pr_debug("using decomp sbounce buffer, len %x\n", slen); | |
| } | |
| if (dlen % c->multiple) | |
| dlen = round_down(dlen, c->multiple); | |
| if (dlen < required_len || (u64)dst % c->alignment) { | |
| dst = ctx->dbounce; | |
| dlen = min(required_len, BOUNCE_BUFFER_SIZE); | |
| pr_debug("using decomp dbounce buffer, len %x\n", dlen); | |
| } | |
| if (dlen < c->minimum) | |
| goto usesw; | |
| if (dlen > c->maximum) | |
| dlen = c->maximum; | |
| tmplen = dlen; | |
| timeout = ktime_add_ms(ktime_get(), DECOMP_BUSY_TIMEOUT); | |
| do { | |
| dlen = tmplen; /* reset dlen, if we're retrying */ | |
| ret = ctx->driver->decompress(src, slen, dst, &dlen, ctx->wmem); | |
| } while (ret == -EBUSY && ktime_before(ktime_get(), timeout)); | |
| if (ret) { | |
| usesw: | |
| /* reset everything, sw doesn't have constraints */ | |
| src = p->in + padding; | |
| slen = be32_to_cpu(g->compressed_length); | |
| spadding = 0; | |
| dst = p->out; | |
| dlen = p->oremain; | |
| dpadding = 0; | |
| if (dlen < required_len) { /* have ignore bytes */ | |
| dst = ctx->dbounce; | |
| dlen = BOUNCE_BUFFER_SIZE; | |
| } | |
| pr_info_ratelimited("using software 842 decompression\n"); | |
| ret = sw842_decompress(src, slen, dst, &dlen); | |
| } | |
| if (ret) | |
| return ret; | |
| slen -= spadding; | |
| dlen -= ignore; | |
| if (ignore) | |
| pr_debug("ignoring last %x bytes\n", ignore); | |
| if (dst == ctx->dbounce) | |
| memcpy(p->out, dst, dlen); | |
| pr_debug("decompress slen %x padding %x dlen %x ignore %x\n", | |
| slen, padding, dlen, ignore); | |
| return update_param(p, slen + padding, dlen); | |
| } | |
| int nx842_crypto_decompress(struct crypto_tfm *tfm, | |
| const u8 *src, unsigned int slen, | |
| u8 *dst, unsigned int *dlen) | |
| { | |
| struct nx842_crypto_ctx *ctx = crypto_tfm_ctx(tfm); | |
| struct nx842_crypto_header *hdr; | |
| struct nx842_crypto_param p; | |
| struct nx842_constraints c = *ctx->driver->constraints; | |
| int n, ret, hdr_len; | |
| u16 ignore = 0; | |
| check_constraints(&c); | |
| p.in = (u8 *)src; | |
| p.iremain = slen; | |
| p.out = dst; | |
| p.oremain = *dlen; | |
| p.ototal = 0; | |
| *dlen = 0; | |
| hdr = (struct nx842_crypto_header *)src; | |
| spin_lock_bh(&ctx->lock); | |
| /* If it doesn't start with our header magic number, assume it's a raw | |
| * 842 compressed buffer and pass it directly to the hardware driver | |
| */ | |
| if (be16_to_cpu(hdr->magic) != NX842_CRYPTO_MAGIC) { | |
| struct nx842_crypto_header_group g = { | |
| .padding = 0, | |
| .compressed_length = cpu_to_be32(p.iremain), | |
| .uncompressed_length = cpu_to_be32(p.oremain), | |
| }; | |
| ret = decompress(ctx, &p, &g, &c, 0); | |
| if (ret) | |
| goto unlock; | |
| goto success; | |
| } | |
| if (!hdr->groups) { | |
| pr_err("header has no groups\n"); | |
| ret = -EINVAL; | |
| goto unlock; | |
| } | |
| if (hdr->groups > NX842_CRYPTO_GROUP_MAX) { | |
| pr_err("header has too many groups %x, max %x\n", | |
| hdr->groups, NX842_CRYPTO_GROUP_MAX); | |
| ret = -EINVAL; | |
| goto unlock; | |
| } | |
| hdr_len = NX842_CRYPTO_HEADER_SIZE(hdr->groups); | |
| if (hdr_len > slen) { | |
| ret = -EOVERFLOW; | |
| goto unlock; | |
| } | |
| memcpy(&ctx->header, src, hdr_len); | |
| hdr = &ctx->header; | |
| for (n = 0; n < hdr->groups; n++) { | |
| /* ignore applies to last group */ | |
| if (n + 1 == hdr->groups) | |
| ignore = be16_to_cpu(hdr->ignore); | |
| ret = decompress(ctx, &p, &hdr->group[n], &c, ignore); | |
| if (ret) | |
| goto unlock; | |
| } | |
| success: | |
| *dlen = p.ototal; | |
| pr_debug("decompress total slen %x dlen %x\n", slen, *dlen); | |
| ret = 0; | |
| unlock: | |
| spin_unlock_bh(&ctx->lock); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(nx842_crypto_decompress); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_DESCRIPTION("IBM PowerPC Nest (NX) 842 Hardware Compression Driver"); | |
| MODULE_AUTHOR("Dan Streetman <ddstreet@ieee.org>"); |