| /* | |
| * AD7766/AD7767 SPI ADC driver | |
| * | |
| * Copyright 2016 Analog Devices Inc. | |
| * | |
| * Licensed under the GPL-2 or later. | |
| */ | |
| #include <linux/clk.h> | |
| #include <linux/delay.h> | |
| #include <linux/device.h> | |
| #include <linux/err.h> | |
| #include <linux/gpio/consumer.h> | |
| #include <linux/module.h> | |
| #include <linux/regulator/consumer.h> | |
| #include <linux/slab.h> | |
| #include <linux/spi/spi.h> | |
| #include <linux/iio/iio.h> | |
| #include <linux/iio/buffer.h> | |
| #include <linux/iio/trigger.h> | |
| #include <linux/iio/trigger_consumer.h> | |
| #include <linux/iio/triggered_buffer.h> | |
| struct ad7766_chip_info { | |
| unsigned int decimation_factor; | |
| }; | |
| enum { | |
| AD7766_SUPPLY_AVDD = 0, | |
| AD7766_SUPPLY_DVDD = 1, | |
| AD7766_SUPPLY_VREF = 2, | |
| AD7766_NUM_SUPPLIES = 3 | |
| }; | |
| struct ad7766 { | |
| const struct ad7766_chip_info *chip_info; | |
| struct spi_device *spi; | |
| struct clk *mclk; | |
| struct gpio_desc *pd_gpio; | |
| struct regulator_bulk_data reg[AD7766_NUM_SUPPLIES]; | |
| struct iio_trigger *trig; | |
| struct spi_transfer xfer; | |
| struct spi_message msg; | |
| /* | |
| * DMA (thus cache coherency maintenance) requires the | |
| * transfer buffers to live in their own cache lines. | |
| * Make the buffer large enough for one 24 bit sample and one 64 bit | |
| * aligned 64 bit timestamp. | |
| */ | |
| unsigned char data[ALIGN(3, sizeof(s64)) + sizeof(s64)] | |
| ____cacheline_aligned; | |
| }; | |
| /* | |
| * AD7766 and AD7767 variations are interface compatible, the main difference is | |
| * analog performance. Both parts will use the same ID. | |
| */ | |
| enum ad7766_device_ids { | |
| ID_AD7766, | |
| ID_AD7766_1, | |
| ID_AD7766_2, | |
| }; | |
| static irqreturn_t ad7766_trigger_handler(int irq, void *p) | |
| { | |
| struct iio_poll_func *pf = p; | |
| struct iio_dev *indio_dev = pf->indio_dev; | |
| struct ad7766 *ad7766 = iio_priv(indio_dev); | |
| int ret; | |
| ret = spi_sync(ad7766->spi, &ad7766->msg); | |
| if (ret < 0) | |
| goto done; | |
| iio_push_to_buffers_with_timestamp(indio_dev, ad7766->data, | |
| pf->timestamp); | |
| done: | |
| iio_trigger_notify_done(indio_dev->trig); | |
| return IRQ_HANDLED; | |
| } | |
| static int ad7766_preenable(struct iio_dev *indio_dev) | |
| { | |
| struct ad7766 *ad7766 = iio_priv(indio_dev); | |
| int ret; | |
| ret = regulator_bulk_enable(ARRAY_SIZE(ad7766->reg), ad7766->reg); | |
| if (ret < 0) { | |
| dev_err(&ad7766->spi->dev, "Failed to enable supplies: %d\n", | |
| ret); | |
| return ret; | |
| } | |
| ret = clk_prepare_enable(ad7766->mclk); | |
| if (ret < 0) { | |
| dev_err(&ad7766->spi->dev, "Failed to enable MCLK: %d\n", ret); | |
| regulator_bulk_disable(ARRAY_SIZE(ad7766->reg), ad7766->reg); | |
| return ret; | |
| } | |
| gpiod_set_value(ad7766->pd_gpio, 0); | |
| return 0; | |
| } | |
| static int ad7766_postdisable(struct iio_dev *indio_dev) | |
| { | |
| struct ad7766 *ad7766 = iio_priv(indio_dev); | |
| gpiod_set_value(ad7766->pd_gpio, 1); | |
| /* | |
| * The PD pin is synchronous to the clock, so give it some time to | |
| * notice the change before we disable the clock. | |
| */ | |
| msleep(20); | |
| clk_disable_unprepare(ad7766->mclk); | |
| regulator_bulk_disable(ARRAY_SIZE(ad7766->reg), ad7766->reg); | |
| return 0; | |
| } | |
| static int ad7766_read_raw(struct iio_dev *indio_dev, | |
| const struct iio_chan_spec *chan, int *val, int *val2, long info) | |
| { | |
| struct ad7766 *ad7766 = iio_priv(indio_dev); | |
| struct regulator *vref = ad7766->reg[AD7766_SUPPLY_VREF].consumer; | |
| int scale_uv; | |
| switch (info) { | |
| case IIO_CHAN_INFO_SCALE: | |
| scale_uv = regulator_get_voltage(vref); | |
| if (scale_uv < 0) | |
| return scale_uv; | |
| *val = scale_uv / 1000; | |
| *val2 = chan->scan_type.realbits; | |
| return IIO_VAL_FRACTIONAL_LOG2; | |
| case IIO_CHAN_INFO_SAMP_FREQ: | |
| *val = clk_get_rate(ad7766->mclk) / | |
| ad7766->chip_info->decimation_factor; | |
| return IIO_VAL_INT; | |
| } | |
| return -EINVAL; | |
| } | |
| static const struct iio_chan_spec ad7766_channels[] = { | |
| { | |
| .type = IIO_VOLTAGE, | |
| .indexed = 1, | |
| .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), | |
| .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), | |
| .scan_type = { | |
| .sign = 's', | |
| .realbits = 24, | |
| .storagebits = 32, | |
| .endianness = IIO_BE, | |
| }, | |
| }, | |
| IIO_CHAN_SOFT_TIMESTAMP(1), | |
| }; | |
| static const struct ad7766_chip_info ad7766_chip_info[] = { | |
| [ID_AD7766] = { | |
| .decimation_factor = 8, | |
| }, | |
| [ID_AD7766_1] = { | |
| .decimation_factor = 16, | |
| }, | |
| [ID_AD7766_2] = { | |
| .decimation_factor = 32, | |
| }, | |
| }; | |
| static const struct iio_buffer_setup_ops ad7766_buffer_setup_ops = { | |
| .preenable = &ad7766_preenable, | |
| .postenable = &iio_triggered_buffer_postenable, | |
| .predisable = &iio_triggered_buffer_predisable, | |
| .postdisable = &ad7766_postdisable, | |
| }; | |
| static const struct iio_info ad7766_info = { | |
| .driver_module = THIS_MODULE, | |
| .read_raw = &ad7766_read_raw, | |
| }; | |
| static irqreturn_t ad7766_irq(int irq, void *private) | |
| { | |
| iio_trigger_poll(private); | |
| return IRQ_HANDLED; | |
| } | |
| static int ad7766_set_trigger_state(struct iio_trigger *trig, bool enable) | |
| { | |
| struct ad7766 *ad7766 = iio_trigger_get_drvdata(trig); | |
| if (enable) | |
| enable_irq(ad7766->spi->irq); | |
| else | |
| disable_irq(ad7766->spi->irq); | |
| return 0; | |
| } | |
| static const struct iio_trigger_ops ad7766_trigger_ops = { | |
| .owner = THIS_MODULE, | |
| .set_trigger_state = ad7766_set_trigger_state, | |
| .validate_device = iio_trigger_validate_own_device, | |
| }; | |
| static int ad7766_probe(struct spi_device *spi) | |
| { | |
| const struct spi_device_id *id = spi_get_device_id(spi); | |
| struct iio_dev *indio_dev; | |
| struct ad7766 *ad7766; | |
| int ret; | |
| indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*ad7766)); | |
| if (!indio_dev) | |
| return -ENOMEM; | |
| ad7766 = iio_priv(indio_dev); | |
| ad7766->chip_info = &ad7766_chip_info[id->driver_data]; | |
| ad7766->mclk = devm_clk_get(&spi->dev, "mclk"); | |
| if (IS_ERR(ad7766->mclk)) | |
| return PTR_ERR(ad7766->mclk); | |
| ad7766->reg[AD7766_SUPPLY_AVDD].supply = "avdd"; | |
| ad7766->reg[AD7766_SUPPLY_DVDD].supply = "dvdd"; | |
| ad7766->reg[AD7766_SUPPLY_VREF].supply = "vref"; | |
| ret = devm_regulator_bulk_get(&spi->dev, ARRAY_SIZE(ad7766->reg), | |
| ad7766->reg); | |
| if (ret) | |
| return ret; | |
| ad7766->pd_gpio = devm_gpiod_get_optional(&spi->dev, "powerdown", | |
| GPIOD_OUT_HIGH); | |
| if (IS_ERR(ad7766->pd_gpio)) | |
| return PTR_ERR(ad7766->pd_gpio); | |
| indio_dev->dev.parent = &spi->dev; | |
| indio_dev->name = spi_get_device_id(spi)->name; | |
| indio_dev->modes = INDIO_DIRECT_MODE; | |
| indio_dev->channels = ad7766_channels; | |
| indio_dev->num_channels = ARRAY_SIZE(ad7766_channels); | |
| indio_dev->info = &ad7766_info; | |
| if (spi->irq > 0) { | |
| ad7766->trig = devm_iio_trigger_alloc(&spi->dev, "%s-dev%d", | |
| indio_dev->name, indio_dev->id); | |
| if (!ad7766->trig) | |
| return -ENOMEM; | |
| ad7766->trig->ops = &ad7766_trigger_ops; | |
| ad7766->trig->dev.parent = &spi->dev; | |
| iio_trigger_set_drvdata(ad7766->trig, ad7766); | |
| ret = devm_request_irq(&spi->dev, spi->irq, ad7766_irq, | |
| IRQF_TRIGGER_FALLING, dev_name(&spi->dev), | |
| ad7766->trig); | |
| if (ret < 0) | |
| return ret; | |
| /* | |
| * The device generates interrupts as long as it is powered up. | |
| * Some platforms might not allow the option to power it down so | |
| * disable the interrupt to avoid extra load on the system | |
| */ | |
| disable_irq(spi->irq); | |
| ret = devm_iio_trigger_register(&spi->dev, ad7766->trig); | |
| if (ret) | |
| return ret; | |
| } | |
| spi_set_drvdata(spi, indio_dev); | |
| ad7766->spi = spi; | |
| /* First byte always 0 */ | |
| ad7766->xfer.rx_buf = &ad7766->data[1]; | |
| ad7766->xfer.len = 3; | |
| spi_message_init(&ad7766->msg); | |
| spi_message_add_tail(&ad7766->xfer, &ad7766->msg); | |
| ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev, | |
| &iio_pollfunc_store_time, &ad7766_trigger_handler, | |
| &ad7766_buffer_setup_ops); | |
| if (ret) | |
| return ret; | |
| ret = devm_iio_device_register(&spi->dev, indio_dev); | |
| if (ret) | |
| return ret; | |
| return 0; | |
| } | |
| static const struct spi_device_id ad7766_id[] = { | |
| {"ad7766", ID_AD7766}, | |
| {"ad7766-1", ID_AD7766_1}, | |
| {"ad7766-2", ID_AD7766_2}, | |
| {"ad7767", ID_AD7766}, | |
| {"ad7767-1", ID_AD7766_1}, | |
| {"ad7767-2", ID_AD7766_2}, | |
| {} | |
| }; | |
| MODULE_DEVICE_TABLE(spi, ad7766_id); | |
| static struct spi_driver ad7766_driver = { | |
| .driver = { | |
| .name = "ad7766", | |
| }, | |
| .probe = ad7766_probe, | |
| .id_table = ad7766_id, | |
| }; | |
| module_spi_driver(ad7766_driver); | |
| MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>"); | |
| MODULE_DESCRIPTION("Analog Devices AD7766 and AD7767 ADCs driver support"); | |
| MODULE_LICENSE("GPL v2"); |