| /* | |
| * Copyright (C) 2017 Tony Lindgren <tony@atomide.com> | |
| * | |
| * Rewritten for Linux IIO framework with some code based on | |
| * earlier driver found in the Motorola Linux kernel: | |
| * | |
| * Copyright (C) 2009-2010 Motorola, Inc. | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| */ | |
| #include <linux/delay.h> | |
| #include <linux/device.h> | |
| #include <linux/err.h> | |
| #include <linux/init.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/of_platform.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/regmap.h> | |
| #include <linux/iio/buffer.h> | |
| #include <linux/iio/driver.h> | |
| #include <linux/iio/iio.h> | |
| #include <linux/iio/kfifo_buf.h> | |
| #include <linux/mfd/motorola-cpcap.h> | |
| /* Register CPCAP_REG_ADCC1 bits */ | |
| #define CPCAP_BIT_ADEN_AUTO_CLR BIT(15) /* Currently unused */ | |
| #define CPCAP_BIT_CAL_MODE BIT(14) /* Set with BIT_RAND0 */ | |
| #define CPCAP_BIT_ADC_CLK_SEL1 BIT(13) /* Currently unused */ | |
| #define CPCAP_BIT_ADC_CLK_SEL0 BIT(12) /* Currently unused */ | |
| #define CPCAP_BIT_ATOX BIT(11) | |
| #define CPCAP_BIT_ATO3 BIT(10) | |
| #define CPCAP_BIT_ATO2 BIT(9) | |
| #define CPCAP_BIT_ATO1 BIT(8) | |
| #define CPCAP_BIT_ATO0 BIT(7) | |
| #define CPCAP_BIT_ADA2 BIT(6) | |
| #define CPCAP_BIT_ADA1 BIT(5) | |
| #define CPCAP_BIT_ADA0 BIT(4) | |
| #define CPCAP_BIT_AD_SEL1 BIT(3) /* Set for bank1 */ | |
| #define CPCAP_BIT_RAND1 BIT(2) /* Set for channel 16 & 17 */ | |
| #define CPCAP_BIT_RAND0 BIT(1) /* Set with CAL_MODE */ | |
| #define CPCAP_BIT_ADEN BIT(0) /* Currently unused */ | |
| #define CPCAP_REG_ADCC1_DEFAULTS (CPCAP_BIT_ADEN_AUTO_CLR | \ | |
| CPCAP_BIT_ADC_CLK_SEL0 | \ | |
| CPCAP_BIT_RAND1) | |
| /* Register CPCAP_REG_ADCC2 bits */ | |
| #define CPCAP_BIT_CAL_FACTOR_ENABLE BIT(15) /* Currently unused */ | |
| #define CPCAP_BIT_BATDETB_EN BIT(14) /* Currently unused */ | |
| #define CPCAP_BIT_ADTRIG_ONESHOT BIT(13) /* Set for !TIMING_IMM */ | |
| #define CPCAP_BIT_ASC BIT(12) /* Set for TIMING_IMM */ | |
| #define CPCAP_BIT_ATOX_PS_FACTOR BIT(11) | |
| #define CPCAP_BIT_ADC_PS_FACTOR1 BIT(10) | |
| #define CPCAP_BIT_ADC_PS_FACTOR0 BIT(9) | |
| #define CPCAP_BIT_AD4_SELECT BIT(8) /* Currently unused */ | |
| #define CPCAP_BIT_ADC_BUSY BIT(7) /* Currently unused */ | |
| #define CPCAP_BIT_THERMBIAS_EN BIT(6) /* Bias for AD0_BATTDETB */ | |
| #define CPCAP_BIT_ADTRIG_DIS BIT(5) /* Disable interrupt */ | |
| #define CPCAP_BIT_LIADC BIT(4) /* Currently unused */ | |
| #define CPCAP_BIT_TS_REFEN BIT(3) /* Currently unused */ | |
| #define CPCAP_BIT_TS_M2 BIT(2) /* Currently unused */ | |
| #define CPCAP_BIT_TS_M1 BIT(1) /* Currently unused */ | |
| #define CPCAP_BIT_TS_M0 BIT(0) /* Currently unused */ | |
| #define CPCAP_REG_ADCC2_DEFAULTS (CPCAP_BIT_AD4_SELECT | \ | |
| CPCAP_BIT_ADTRIG_DIS | \ | |
| CPCAP_BIT_LIADC | \ | |
| CPCAP_BIT_TS_M2 | \ | |
| CPCAP_BIT_TS_M1) | |
| #define CPCAP_MAX_TEMP_LVL 27 | |
| #define CPCAP_FOUR_POINT_TWO_ADC 801 | |
| #define ST_ADC_CAL_CHRGI_HIGH_THRESHOLD 530 | |
| #define ST_ADC_CAL_CHRGI_LOW_THRESHOLD 494 | |
| #define ST_ADC_CAL_BATTI_HIGH_THRESHOLD 530 | |
| #define ST_ADC_CAL_BATTI_LOW_THRESHOLD 494 | |
| #define ST_ADC_CALIBRATE_DIFF_THRESHOLD 3 | |
| #define CPCAP_ADC_MAX_RETRIES 5 /* Calibration */ | |
| /** | |
| * struct cpcap_adc_ato - timing settings for cpcap adc | |
| * | |
| * Unfortunately no cpcap documentation available, please document when | |
| * using these. | |
| */ | |
| struct cpcap_adc_ato { | |
| unsigned short ato_in; | |
| unsigned short atox_in; | |
| unsigned short adc_ps_factor_in; | |
| unsigned short atox_ps_factor_in; | |
| unsigned short ato_out; | |
| unsigned short atox_out; | |
| unsigned short adc_ps_factor_out; | |
| unsigned short atox_ps_factor_out; | |
| }; | |
| /** | |
| * struct cpcap-adc - cpcap adc device driver data | |
| * @reg: cpcap regmap | |
| * @dev: struct device | |
| * @vendor: cpcap vendor | |
| * @irq: interrupt | |
| * @lock: mutex | |
| * @ato: request timings | |
| * @wq_data_avail: work queue | |
| * @done: work done | |
| */ | |
| struct cpcap_adc { | |
| struct regmap *reg; | |
| struct device *dev; | |
| u16 vendor; | |
| int irq; | |
| struct mutex lock; /* ADC register access lock */ | |
| const struct cpcap_adc_ato *ato; | |
| wait_queue_head_t wq_data_avail; | |
| bool done; | |
| }; | |
| /** | |
| * enum cpcap_adc_channel - cpcap adc channels | |
| */ | |
| enum cpcap_adc_channel { | |
| /* Bank0 channels */ | |
| CPCAP_ADC_AD0, /* Battery temperature */ | |
| CPCAP_ADC_BATTP, /* Battery voltage */ | |
| CPCAP_ADC_VBUS, /* USB VBUS voltage */ | |
| CPCAP_ADC_AD3, /* Die temperature when charging */ | |
| CPCAP_ADC_BPLUS_AD4, /* Another battery or system voltage */ | |
| CPCAP_ADC_CHG_ISENSE, /* Calibrated charge current */ | |
| CPCAP_ADC_BATTI, /* Calibrated system current */ | |
| CPCAP_ADC_USB_ID, /* USB OTG ID, unused on droid 4? */ | |
| /* Bank1 channels */ | |
| CPCAP_ADC_AD8, /* Seems unused */ | |
| CPCAP_ADC_AD9, /* Seems unused */ | |
| CPCAP_ADC_LICELL, /* Maybe system voltage? Always 3V */ | |
| CPCAP_ADC_HV_BATTP, /* Another battery detection? */ | |
| CPCAP_ADC_TSX1_AD12, /* Seems unused, for touchscreen? */ | |
| CPCAP_ADC_TSX2_AD13, /* Seems unused, for touchscreen? */ | |
| CPCAP_ADC_TSY1_AD14, /* Seems unused, for touchscreen? */ | |
| CPCAP_ADC_TSY2_AD15, /* Seems unused, for touchscreen? */ | |
| /* Remuxed channels using bank0 entries */ | |
| CPCAP_ADC_BATTP_PI16, /* Alternative mux mode for BATTP */ | |
| CPCAP_ADC_BATTI_PI17, /* Alternative mux mode for BATTI */ | |
| CPCAP_ADC_CHANNEL_NUM, | |
| }; | |
| /** | |
| * enum cpcap_adc_timing - cpcap adc timing options | |
| * | |
| * CPCAP_ADC_TIMING_IMM seems to be immediate with no timings. | |
| * Please document when using. | |
| */ | |
| enum cpcap_adc_timing { | |
| CPCAP_ADC_TIMING_IMM, | |
| CPCAP_ADC_TIMING_IN, | |
| CPCAP_ADC_TIMING_OUT, | |
| }; | |
| /** | |
| * struct cpcap_adc_phasing_tbl - cpcap phasing table | |
| * @offset: offset in the phasing table | |
| * @multiplier: multiplier in the phasing table | |
| * @divider: divider in the phasing table | |
| * @min: minimum value | |
| * @max: maximum value | |
| */ | |
| struct cpcap_adc_phasing_tbl { | |
| short offset; | |
| unsigned short multiplier; | |
| unsigned short divider; | |
| short min; | |
| short max; | |
| }; | |
| /** | |
| * struct cpcap_adc_conversion_tbl - cpcap conversion table | |
| * @conv_type: conversion type | |
| * @align_offset: align offset | |
| * @conv_offset: conversion offset | |
| * @cal_offset: calibration offset | |
| * @multiplier: conversion multiplier | |
| * @divider: conversion divider | |
| */ | |
| struct cpcap_adc_conversion_tbl { | |
| enum iio_chan_info_enum conv_type; | |
| int align_offset; | |
| int conv_offset; | |
| int cal_offset; | |
| int multiplier; | |
| int divider; | |
| }; | |
| /** | |
| * struct cpcap_adc_request - cpcap adc request | |
| * @channel: request channel | |
| * @phase_tbl: channel phasing table | |
| * @conv_tbl: channel conversion table | |
| * @bank_index: channel index within the bank | |
| * @timing: timing settings | |
| * @result: result | |
| */ | |
| struct cpcap_adc_request { | |
| int channel; | |
| const struct cpcap_adc_phasing_tbl *phase_tbl; | |
| const struct cpcap_adc_conversion_tbl *conv_tbl; | |
| int bank_index; | |
| enum cpcap_adc_timing timing; | |
| int result; | |
| }; | |
| /* Phasing table for channels. Note that channels 16 & 17 use BATTP and BATTI */ | |
| static const struct cpcap_adc_phasing_tbl bank_phasing[] = { | |
| /* Bank0 */ | |
| [CPCAP_ADC_AD0] = {0, 0x80, 0x80, 0, 1023}, | |
| [CPCAP_ADC_BATTP] = {0, 0x80, 0x80, 0, 1023}, | |
| [CPCAP_ADC_VBUS] = {0, 0x80, 0x80, 0, 1023}, | |
| [CPCAP_ADC_AD3] = {0, 0x80, 0x80, 0, 1023}, | |
| [CPCAP_ADC_BPLUS_AD4] = {0, 0x80, 0x80, 0, 1023}, | |
| [CPCAP_ADC_CHG_ISENSE] = {0, 0x80, 0x80, -512, 511}, | |
| [CPCAP_ADC_BATTI] = {0, 0x80, 0x80, -512, 511}, | |
| [CPCAP_ADC_USB_ID] = {0, 0x80, 0x80, 0, 1023}, | |
| /* Bank1 */ | |
| [CPCAP_ADC_AD8] = {0, 0x80, 0x80, 0, 1023}, | |
| [CPCAP_ADC_AD9] = {0, 0x80, 0x80, 0, 1023}, | |
| [CPCAP_ADC_LICELL] = {0, 0x80, 0x80, 0, 1023}, | |
| [CPCAP_ADC_HV_BATTP] = {0, 0x80, 0x80, 0, 1023}, | |
| [CPCAP_ADC_TSX1_AD12] = {0, 0x80, 0x80, 0, 1023}, | |
| [CPCAP_ADC_TSX2_AD13] = {0, 0x80, 0x80, 0, 1023}, | |
| [CPCAP_ADC_TSY1_AD14] = {0, 0x80, 0x80, 0, 1023}, | |
| [CPCAP_ADC_TSY2_AD15] = {0, 0x80, 0x80, 0, 1023}, | |
| }; | |
| /* | |
| * Conversion table for channels. Updated during init based on calibration. | |
| * Here too channels 16 & 17 use BATTP and BATTI. | |
| */ | |
| static struct cpcap_adc_conversion_tbl bank_conversion[] = { | |
| /* Bank0 */ | |
| [CPCAP_ADC_AD0] = { | |
| IIO_CHAN_INFO_PROCESSED, 0, 0, 0, 1, 1, | |
| }, | |
| [CPCAP_ADC_BATTP] = { | |
| IIO_CHAN_INFO_PROCESSED, 0, 2400, 0, 2300, 1023, | |
| }, | |
| [CPCAP_ADC_VBUS] = { | |
| IIO_CHAN_INFO_PROCESSED, 0, 0, 0, 10000, 1023, | |
| }, | |
| [CPCAP_ADC_AD3] = { | |
| IIO_CHAN_INFO_PROCESSED, 0, 0, 0, 1, 1, | |
| }, | |
| [CPCAP_ADC_BPLUS_AD4] = { | |
| IIO_CHAN_INFO_PROCESSED, 0, 2400, 0, 2300, 1023, | |
| }, | |
| [CPCAP_ADC_CHG_ISENSE] = { | |
| IIO_CHAN_INFO_PROCESSED, -512, 2, 0, 5000, 1023, | |
| }, | |
| [CPCAP_ADC_BATTI] = { | |
| IIO_CHAN_INFO_PROCESSED, -512, 2, 0, 5000, 1023, | |
| }, | |
| [CPCAP_ADC_USB_ID] = { | |
| IIO_CHAN_INFO_RAW, 0, 0, 0, 1, 1, | |
| }, | |
| /* Bank1 */ | |
| [CPCAP_ADC_AD8] = { | |
| IIO_CHAN_INFO_RAW, 0, 0, 0, 1, 1, | |
| }, | |
| [CPCAP_ADC_AD9] = { | |
| IIO_CHAN_INFO_RAW, 0, 0, 0, 1, 1, | |
| }, | |
| [CPCAP_ADC_LICELL] = { | |
| IIO_CHAN_INFO_PROCESSED, 0, 0, 0, 3400, 1023, | |
| }, | |
| [CPCAP_ADC_HV_BATTP] = { | |
| IIO_CHAN_INFO_RAW, 0, 0, 0, 1, 1, | |
| }, | |
| [CPCAP_ADC_TSX1_AD12] = { | |
| IIO_CHAN_INFO_RAW, 0, 0, 0, 1, 1, | |
| }, | |
| [CPCAP_ADC_TSX2_AD13] = { | |
| IIO_CHAN_INFO_RAW, 0, 0, 0, 1, 1, | |
| }, | |
| [CPCAP_ADC_TSY1_AD14] = { | |
| IIO_CHAN_INFO_RAW, 0, 0, 0, 1, 1, | |
| }, | |
| [CPCAP_ADC_TSY2_AD15] = { | |
| IIO_CHAN_INFO_RAW, 0, 0, 0, 1, 1, | |
| }, | |
| }; | |
| /* | |
| * Temperature lookup table of register values to milliCelcius. | |
| * REVISIT: Check the duplicate 0x3ff entry in a freezer | |
| */ | |
| static const int temp_map[CPCAP_MAX_TEMP_LVL][2] = { | |
| { 0x03ff, -40000 }, | |
| { 0x03ff, -35000 }, | |
| { 0x03ef, -30000 }, | |
| { 0x03b2, -25000 }, | |
| { 0x036c, -20000 }, | |
| { 0x0320, -15000 }, | |
| { 0x02d0, -10000 }, | |
| { 0x027f, -5000 }, | |
| { 0x022f, 0 }, | |
| { 0x01e4, 5000 }, | |
| { 0x019f, 10000 }, | |
| { 0x0161, 15000 }, | |
| { 0x012b, 20000 }, | |
| { 0x00fc, 25000 }, | |
| { 0x00d4, 30000 }, | |
| { 0x00b2, 35000 }, | |
| { 0x0095, 40000 }, | |
| { 0x007d, 45000 }, | |
| { 0x0069, 50000 }, | |
| { 0x0059, 55000 }, | |
| { 0x004b, 60000 }, | |
| { 0x003f, 65000 }, | |
| { 0x0036, 70000 }, | |
| { 0x002e, 75000 }, | |
| { 0x0027, 80000 }, | |
| { 0x0022, 85000 }, | |
| { 0x001d, 90000 }, | |
| }; | |
| #define CPCAP_CHAN(_type, _index, _address, _datasheet_name) { \ | |
| .type = (_type), \ | |
| .address = (_address), \ | |
| .indexed = 1, \ | |
| .channel = (_index), \ | |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ | |
| BIT(IIO_CHAN_INFO_PROCESSED), \ | |
| .scan_index = (_index), \ | |
| .scan_type = { \ | |
| .sign = 'u', \ | |
| .realbits = 10, \ | |
| .storagebits = 16, \ | |
| .endianness = IIO_CPU, \ | |
| }, \ | |
| .datasheet_name = (_datasheet_name), \ | |
| } | |
| /* | |
| * The datasheet names are from Motorola mapphone Linux kernel except | |
| * for the last two which might be uncalibrated charge voltage and | |
| * current. | |
| */ | |
| static const struct iio_chan_spec cpcap_adc_channels[] = { | |
| /* Bank0 */ | |
| CPCAP_CHAN(IIO_TEMP, 0, CPCAP_REG_ADCD0, "battdetb"), | |
| CPCAP_CHAN(IIO_VOLTAGE, 1, CPCAP_REG_ADCD1, "battp"), | |
| CPCAP_CHAN(IIO_VOLTAGE, 2, CPCAP_REG_ADCD2, "vbus"), | |
| CPCAP_CHAN(IIO_TEMP, 3, CPCAP_REG_ADCD3, "ad3"), | |
| CPCAP_CHAN(IIO_VOLTAGE, 4, CPCAP_REG_ADCD4, "ad4"), | |
| CPCAP_CHAN(IIO_CURRENT, 5, CPCAP_REG_ADCD5, "chg_isense"), | |
| CPCAP_CHAN(IIO_CURRENT, 6, CPCAP_REG_ADCD6, "batti"), | |
| CPCAP_CHAN(IIO_VOLTAGE, 7, CPCAP_REG_ADCD7, "usb_id"), | |
| /* Bank1 */ | |
| CPCAP_CHAN(IIO_CURRENT, 8, CPCAP_REG_ADCD0, "ad8"), | |
| CPCAP_CHAN(IIO_VOLTAGE, 9, CPCAP_REG_ADCD1, "ad9"), | |
| CPCAP_CHAN(IIO_VOLTAGE, 10, CPCAP_REG_ADCD2, "licell"), | |
| CPCAP_CHAN(IIO_VOLTAGE, 11, CPCAP_REG_ADCD3, "hv_battp"), | |
| CPCAP_CHAN(IIO_VOLTAGE, 12, CPCAP_REG_ADCD4, "tsx1_ad12"), | |
| CPCAP_CHAN(IIO_VOLTAGE, 13, CPCAP_REG_ADCD5, "tsx2_ad13"), | |
| CPCAP_CHAN(IIO_VOLTAGE, 14, CPCAP_REG_ADCD6, "tsy1_ad14"), | |
| CPCAP_CHAN(IIO_VOLTAGE, 15, CPCAP_REG_ADCD7, "tsy2_ad15"), | |
| /* There are two registers with multiplexed functionality */ | |
| CPCAP_CHAN(IIO_VOLTAGE, 16, CPCAP_REG_ADCD0, "chg_vsense"), | |
| CPCAP_CHAN(IIO_CURRENT, 17, CPCAP_REG_ADCD1, "batti2"), | |
| }; | |
| static irqreturn_t cpcap_adc_irq_thread(int irq, void *data) | |
| { | |
| struct iio_dev *indio_dev = data; | |
| struct cpcap_adc *ddata = iio_priv(indio_dev); | |
| int error; | |
| error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2, | |
| CPCAP_BIT_ADTRIG_DIS, | |
| CPCAP_BIT_ADTRIG_DIS); | |
| if (error) | |
| return IRQ_NONE; | |
| ddata->done = true; | |
| wake_up_interruptible(&ddata->wq_data_avail); | |
| return IRQ_HANDLED; | |
| } | |
| /* ADC calibration functions */ | |
| static void cpcap_adc_setup_calibrate(struct cpcap_adc *ddata, | |
| enum cpcap_adc_channel chan) | |
| { | |
| unsigned int value = 0; | |
| unsigned long timeout = jiffies + msecs_to_jiffies(3000); | |
| int error; | |
| if ((chan != CPCAP_ADC_CHG_ISENSE) && | |
| (chan != CPCAP_ADC_BATTI)) | |
| return; | |
| value |= CPCAP_BIT_CAL_MODE | CPCAP_BIT_RAND0; | |
| value |= ((chan << 4) & | |
| (CPCAP_BIT_ADA2 | CPCAP_BIT_ADA1 | CPCAP_BIT_ADA0)); | |
| error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC1, | |
| CPCAP_BIT_CAL_MODE | CPCAP_BIT_ATOX | | |
| CPCAP_BIT_ATO3 | CPCAP_BIT_ATO2 | | |
| CPCAP_BIT_ATO1 | CPCAP_BIT_ATO0 | | |
| CPCAP_BIT_ADA2 | CPCAP_BIT_ADA1 | | |
| CPCAP_BIT_ADA0 | CPCAP_BIT_AD_SEL1 | | |
| CPCAP_BIT_RAND1 | CPCAP_BIT_RAND0, | |
| value); | |
| if (error) | |
| return; | |
| error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2, | |
| CPCAP_BIT_ATOX_PS_FACTOR | | |
| CPCAP_BIT_ADC_PS_FACTOR1 | | |
| CPCAP_BIT_ADC_PS_FACTOR0, | |
| 0); | |
| if (error) | |
| return; | |
| error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2, | |
| CPCAP_BIT_ADTRIG_DIS, | |
| CPCAP_BIT_ADTRIG_DIS); | |
| if (error) | |
| return; | |
| error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2, | |
| CPCAP_BIT_ASC, | |
| CPCAP_BIT_ASC); | |
| if (error) | |
| return; | |
| do { | |
| schedule_timeout_uninterruptible(1); | |
| error = regmap_read(ddata->reg, CPCAP_REG_ADCC2, &value); | |
| if (error) | |
| return; | |
| } while ((value & CPCAP_BIT_ASC) && time_before(jiffies, timeout)); | |
| if (value & CPCAP_BIT_ASC) | |
| dev_err(ddata->dev, | |
| "Timeout waiting for calibration to complete\n"); | |
| error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC1, | |
| CPCAP_BIT_CAL_MODE, 0); | |
| if (error) | |
| return; | |
| } | |
| static int cpcap_adc_calibrate_one(struct cpcap_adc *ddata, | |
| int channel, | |
| u16 calibration_register, | |
| int lower_threshold, | |
| int upper_threshold) | |
| { | |
| unsigned int calibration_data[2]; | |
| unsigned short cal_data_diff; | |
| int i, error; | |
| for (i = 0; i < CPCAP_ADC_MAX_RETRIES; i++) { | |
| calibration_data[0] = 0; | |
| calibration_data[1] = 0; | |
| cal_data_diff = 0; | |
| cpcap_adc_setup_calibrate(ddata, channel); | |
| error = regmap_read(ddata->reg, calibration_register, | |
| &calibration_data[0]); | |
| if (error) | |
| return error; | |
| cpcap_adc_setup_calibrate(ddata, channel); | |
| error = regmap_read(ddata->reg, calibration_register, | |
| &calibration_data[1]); | |
| if (error) | |
| return error; | |
| if (calibration_data[0] > calibration_data[1]) | |
| cal_data_diff = | |
| calibration_data[0] - calibration_data[1]; | |
| else | |
| cal_data_diff = | |
| calibration_data[1] - calibration_data[0]; | |
| if (((calibration_data[1] >= lower_threshold) && | |
| (calibration_data[1] <= upper_threshold) && | |
| (cal_data_diff <= ST_ADC_CALIBRATE_DIFF_THRESHOLD)) || | |
| (ddata->vendor == CPCAP_VENDOR_TI)) { | |
| bank_conversion[channel].cal_offset = | |
| ((short)calibration_data[1] * -1) + 512; | |
| dev_dbg(ddata->dev, "ch%i calibration complete: %i\n", | |
| channel, bank_conversion[channel].cal_offset); | |
| break; | |
| } | |
| usleep_range(5000, 10000); | |
| } | |
| return 0; | |
| } | |
| static int cpcap_adc_calibrate(struct cpcap_adc *ddata) | |
| { | |
| int error; | |
| error = cpcap_adc_calibrate_one(ddata, CPCAP_ADC_CHG_ISENSE, | |
| CPCAP_REG_ADCAL1, | |
| ST_ADC_CAL_CHRGI_LOW_THRESHOLD, | |
| ST_ADC_CAL_CHRGI_HIGH_THRESHOLD); | |
| if (error) | |
| return error; | |
| error = cpcap_adc_calibrate_one(ddata, CPCAP_ADC_BATTI, | |
| CPCAP_REG_ADCAL2, | |
| ST_ADC_CAL_BATTI_LOW_THRESHOLD, | |
| ST_ADC_CAL_BATTI_HIGH_THRESHOLD); | |
| if (error) | |
| return error; | |
| return 0; | |
| } | |
| /* ADC setup, read and scale functions */ | |
| static void cpcap_adc_setup_bank(struct cpcap_adc *ddata, | |
| struct cpcap_adc_request *req) | |
| { | |
| const struct cpcap_adc_ato *ato = ddata->ato; | |
| unsigned short value1 = 0; | |
| unsigned short value2 = 0; | |
| int error; | |
| if (!ato) | |
| return; | |
| switch (req->channel) { | |
| case CPCAP_ADC_AD0: | |
| value2 |= CPCAP_BIT_THERMBIAS_EN; | |
| error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2, | |
| CPCAP_BIT_THERMBIAS_EN, | |
| value2); | |
| if (error) | |
| return; | |
| usleep_range(800, 1000); | |
| break; | |
| case CPCAP_ADC_AD8 ... CPCAP_ADC_TSY2_AD15: | |
| value1 |= CPCAP_BIT_AD_SEL1; | |
| break; | |
| case CPCAP_ADC_BATTP_PI16 ... CPCAP_ADC_BATTI_PI17: | |
| value1 |= CPCAP_BIT_RAND1; | |
| default: | |
| break; | |
| } | |
| switch (req->timing) { | |
| case CPCAP_ADC_TIMING_IN: | |
| value1 |= ato->ato_in; | |
| value1 |= ato->atox_in; | |
| value2 |= ato->adc_ps_factor_in; | |
| value2 |= ato->atox_ps_factor_in; | |
| break; | |
| case CPCAP_ADC_TIMING_OUT: | |
| value1 |= ato->ato_out; | |
| value1 |= ato->atox_out; | |
| value2 |= ato->adc_ps_factor_out; | |
| value2 |= ato->atox_ps_factor_out; | |
| break; | |
| case CPCAP_ADC_TIMING_IMM: | |
| default: | |
| break; | |
| } | |
| error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC1, | |
| CPCAP_BIT_CAL_MODE | CPCAP_BIT_ATOX | | |
| CPCAP_BIT_ATO3 | CPCAP_BIT_ATO2 | | |
| CPCAP_BIT_ATO1 | CPCAP_BIT_ATO0 | | |
| CPCAP_BIT_ADA2 | CPCAP_BIT_ADA1 | | |
| CPCAP_BIT_ADA0 | CPCAP_BIT_AD_SEL1 | | |
| CPCAP_BIT_RAND1 | CPCAP_BIT_RAND0, | |
| value1); | |
| if (error) | |
| return; | |
| error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2, | |
| CPCAP_BIT_ATOX_PS_FACTOR | | |
| CPCAP_BIT_ADC_PS_FACTOR1 | | |
| CPCAP_BIT_ADC_PS_FACTOR0 | | |
| CPCAP_BIT_THERMBIAS_EN, | |
| value2); | |
| if (error) | |
| return; | |
| if (req->timing == CPCAP_ADC_TIMING_IMM) { | |
| error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2, | |
| CPCAP_BIT_ADTRIG_DIS, | |
| CPCAP_BIT_ADTRIG_DIS); | |
| if (error) | |
| return; | |
| error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2, | |
| CPCAP_BIT_ASC, | |
| CPCAP_BIT_ASC); | |
| if (error) | |
| return; | |
| } else { | |
| error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2, | |
| CPCAP_BIT_ADTRIG_ONESHOT, | |
| CPCAP_BIT_ADTRIG_ONESHOT); | |
| if (error) | |
| return; | |
| error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2, | |
| CPCAP_BIT_ADTRIG_DIS, 0); | |
| if (error) | |
| return; | |
| } | |
| } | |
| static int cpcap_adc_start_bank(struct cpcap_adc *ddata, | |
| struct cpcap_adc_request *req) | |
| { | |
| int i, error; | |
| req->timing = CPCAP_ADC_TIMING_IMM; | |
| ddata->done = false; | |
| for (i = 0; i < CPCAP_ADC_MAX_RETRIES; i++) { | |
| cpcap_adc_setup_bank(ddata, req); | |
| error = wait_event_interruptible_timeout(ddata->wq_data_avail, | |
| ddata->done, | |
| msecs_to_jiffies(50)); | |
| if (error > 0) | |
| return 0; | |
| if (error == 0) { | |
| error = -ETIMEDOUT; | |
| continue; | |
| } | |
| if (error < 0) | |
| return error; | |
| } | |
| return error; | |
| } | |
| static int cpcap_adc_stop_bank(struct cpcap_adc *ddata) | |
| { | |
| int error; | |
| error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC1, | |
| 0xffff, | |
| CPCAP_REG_ADCC1_DEFAULTS); | |
| if (error) | |
| return error; | |
| return regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2, | |
| 0xffff, | |
| CPCAP_REG_ADCC2_DEFAULTS); | |
| } | |
| static void cpcap_adc_phase(struct cpcap_adc_request *req) | |
| { | |
| const struct cpcap_adc_conversion_tbl *conv_tbl = req->conv_tbl; | |
| const struct cpcap_adc_phasing_tbl *phase_tbl = req->phase_tbl; | |
| int index = req->channel; | |
| /* Remuxed channels 16 and 17 use BATTP and BATTI entries */ | |
| switch (req->channel) { | |
| case CPCAP_ADC_BATTP: | |
| case CPCAP_ADC_BATTP_PI16: | |
| index = req->bank_index; | |
| req->result -= phase_tbl[index].offset; | |
| req->result -= CPCAP_FOUR_POINT_TWO_ADC; | |
| req->result *= phase_tbl[index].multiplier; | |
| if (phase_tbl[index].divider == 0) | |
| return; | |
| req->result /= phase_tbl[index].divider; | |
| req->result += CPCAP_FOUR_POINT_TWO_ADC; | |
| break; | |
| case CPCAP_ADC_BATTI_PI17: | |
| index = req->bank_index; | |
| /* fallthrough */ | |
| default: | |
| req->result += conv_tbl[index].cal_offset; | |
| req->result += conv_tbl[index].align_offset; | |
| req->result *= phase_tbl[index].multiplier; | |
| if (phase_tbl[index].divider == 0) | |
| return; | |
| req->result /= phase_tbl[index].divider; | |
| req->result += phase_tbl[index].offset; | |
| break; | |
| } | |
| if (req->result < phase_tbl[index].min) | |
| req->result = phase_tbl[index].min; | |
| else if (req->result > phase_tbl[index].max) | |
| req->result = phase_tbl[index].max; | |
| } | |
| /* Looks up temperatures in a table and calculates averages if needed */ | |
| static int cpcap_adc_table_to_millicelcius(unsigned short value) | |
| { | |
| int i, result = 0, alpha; | |
| if (value <= temp_map[CPCAP_MAX_TEMP_LVL - 1][0]) | |
| return temp_map[CPCAP_MAX_TEMP_LVL - 1][1]; | |
| if (value >= temp_map[0][0]) | |
| return temp_map[0][1]; | |
| for (i = 0; i < CPCAP_MAX_TEMP_LVL - 1; i++) { | |
| if ((value <= temp_map[i][0]) && | |
| (value >= temp_map[i + 1][0])) { | |
| if (value == temp_map[i][0]) { | |
| result = temp_map[i][1]; | |
| } else if (value == temp_map[i + 1][0]) { | |
| result = temp_map[i + 1][1]; | |
| } else { | |
| alpha = ((value - temp_map[i][0]) * 1000) / | |
| (temp_map[i + 1][0] - temp_map[i][0]); | |
| result = temp_map[i][1] + | |
| ((alpha * (temp_map[i + 1][1] - | |
| temp_map[i][1])) / 1000); | |
| } | |
| break; | |
| } | |
| } | |
| return result; | |
| } | |
| static void cpcap_adc_convert(struct cpcap_adc_request *req) | |
| { | |
| const struct cpcap_adc_conversion_tbl *conv_tbl = req->conv_tbl; | |
| int index = req->channel; | |
| /* Remuxed channels 16 and 17 use BATTP and BATTI entries */ | |
| switch (req->channel) { | |
| case CPCAP_ADC_BATTP_PI16: | |
| index = CPCAP_ADC_BATTP; | |
| break; | |
| case CPCAP_ADC_BATTI_PI17: | |
| index = CPCAP_ADC_BATTI; | |
| break; | |
| default: | |
| break; | |
| } | |
| /* No conversion for raw channels */ | |
| if (conv_tbl[index].conv_type == IIO_CHAN_INFO_RAW) | |
| return; | |
| /* Temperatures use a lookup table instead of conversion table */ | |
| if ((req->channel == CPCAP_ADC_AD0) || | |
| (req->channel == CPCAP_ADC_AD3)) { | |
| req->result = | |
| cpcap_adc_table_to_millicelcius(req->result); | |
| return; | |
| } | |
| /* All processed channels use a conversion table */ | |
| req->result *= conv_tbl[index].multiplier; | |
| if (conv_tbl[index].divider == 0) | |
| return; | |
| req->result /= conv_tbl[index].divider; | |
| req->result += conv_tbl[index].conv_offset; | |
| } | |
| /* | |
| * REVISIT: Check if timed sampling can use multiple channels at the | |
| * same time. If not, replace channel_mask with just channel. | |
| */ | |
| static int cpcap_adc_read_bank_scaled(struct cpcap_adc *ddata, | |
| struct cpcap_adc_request *req) | |
| { | |
| int calibration_data, error, addr; | |
| if (ddata->vendor == CPCAP_VENDOR_TI) { | |
| error = regmap_read(ddata->reg, CPCAP_REG_ADCAL1, | |
| &calibration_data); | |
| if (error) | |
| return error; | |
| bank_conversion[CPCAP_ADC_CHG_ISENSE].cal_offset = | |
| ((short)calibration_data * -1) + 512; | |
| error = regmap_read(ddata->reg, CPCAP_REG_ADCAL2, | |
| &calibration_data); | |
| if (error) | |
| return error; | |
| bank_conversion[CPCAP_ADC_BATTI].cal_offset = | |
| ((short)calibration_data * -1) + 512; | |
| } | |
| addr = CPCAP_REG_ADCD0 + req->bank_index * 4; | |
| error = regmap_read(ddata->reg, addr, &req->result); | |
| if (error) | |
| return error; | |
| req->result &= 0x3ff; | |
| cpcap_adc_phase(req); | |
| cpcap_adc_convert(req); | |
| return 0; | |
| } | |
| static int cpcap_adc_init_request(struct cpcap_adc_request *req, | |
| int channel) | |
| { | |
| req->channel = channel; | |
| req->phase_tbl = bank_phasing; | |
| req->conv_tbl = bank_conversion; | |
| switch (channel) { | |
| case CPCAP_ADC_AD0 ... CPCAP_ADC_USB_ID: | |
| req->bank_index = channel; | |
| break; | |
| case CPCAP_ADC_AD8 ... CPCAP_ADC_TSY2_AD15: | |
| req->bank_index = channel - 8; | |
| break; | |
| case CPCAP_ADC_BATTP_PI16: | |
| req->bank_index = CPCAP_ADC_BATTP; | |
| break; | |
| case CPCAP_ADC_BATTI_PI17: | |
| req->bank_index = CPCAP_ADC_BATTI; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static int cpcap_adc_read_st_die_temp(struct cpcap_adc *ddata, | |
| int addr, int *val) | |
| { | |
| int error; | |
| error = regmap_read(ddata->reg, addr, val); | |
| if (error) | |
| return error; | |
| *val -= 282; | |
| *val *= 114; | |
| *val += 25000; | |
| return 0; | |
| } | |
| static int cpcap_adc_read(struct iio_dev *indio_dev, | |
| struct iio_chan_spec const *chan, | |
| int *val, int *val2, long mask) | |
| { | |
| struct cpcap_adc *ddata = iio_priv(indio_dev); | |
| struct cpcap_adc_request req; | |
| int error; | |
| error = cpcap_adc_init_request(&req, chan->channel); | |
| if (error) | |
| return error; | |
| switch (mask) { | |
| case IIO_CHAN_INFO_RAW: | |
| mutex_lock(&ddata->lock); | |
| error = cpcap_adc_start_bank(ddata, &req); | |
| if (error) | |
| goto err_unlock; | |
| error = regmap_read(ddata->reg, chan->address, val); | |
| if (error) | |
| goto err_unlock; | |
| error = cpcap_adc_stop_bank(ddata); | |
| if (error) | |
| goto err_unlock; | |
| mutex_unlock(&ddata->lock); | |
| break; | |
| case IIO_CHAN_INFO_PROCESSED: | |
| mutex_lock(&ddata->lock); | |
| error = cpcap_adc_start_bank(ddata, &req); | |
| if (error) | |
| goto err_unlock; | |
| if ((ddata->vendor == CPCAP_VENDOR_ST) && | |
| (chan->channel == CPCAP_ADC_AD3)) { | |
| error = cpcap_adc_read_st_die_temp(ddata, | |
| chan->address, | |
| &req.result); | |
| if (error) | |
| goto err_unlock; | |
| } else { | |
| error = cpcap_adc_read_bank_scaled(ddata, &req); | |
| if (error) | |
| goto err_unlock; | |
| } | |
| error = cpcap_adc_stop_bank(ddata); | |
| if (error) | |
| goto err_unlock; | |
| mutex_unlock(&ddata->lock); | |
| *val = req.result; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| return IIO_VAL_INT; | |
| err_unlock: | |
| mutex_unlock(&ddata->lock); | |
| dev_err(ddata->dev, "error reading ADC: %i\n", error); | |
| return error; | |
| } | |
| static const struct iio_info cpcap_adc_info = { | |
| .read_raw = &cpcap_adc_read, | |
| .driver_module = THIS_MODULE, | |
| }; | |
| /* | |
| * Configuration for Motorola mapphone series such as droid 4. | |
| * Copied from the Motorola mapphone kernel tree. | |
| */ | |
| static const struct cpcap_adc_ato mapphone_adc = { | |
| .ato_in = 0x0480, | |
| .atox_in = 0, | |
| .adc_ps_factor_in = 0x0200, | |
| .atox_ps_factor_in = 0, | |
| .ato_out = 0, | |
| .atox_out = 0, | |
| .adc_ps_factor_out = 0, | |
| .atox_ps_factor_out = 0, | |
| }; | |
| static const struct of_device_id cpcap_adc_id_table[] = { | |
| { | |
| .compatible = "motorola,cpcap-adc", | |
| }, | |
| { | |
| .compatible = "motorola,mapphone-cpcap-adc", | |
| .data = &mapphone_adc, | |
| }, | |
| { /* sentinel */ }, | |
| }; | |
| MODULE_DEVICE_TABLE(of, cpcap_adc_id_table); | |
| static int cpcap_adc_probe(struct platform_device *pdev) | |
| { | |
| const struct of_device_id *match; | |
| struct cpcap_adc *ddata; | |
| struct iio_dev *indio_dev; | |
| int error; | |
| match = of_match_device(of_match_ptr(cpcap_adc_id_table), | |
| &pdev->dev); | |
| if (!match) | |
| return -EINVAL; | |
| if (!match->data) { | |
| dev_err(&pdev->dev, "no configuration data found\n"); | |
| return -ENODEV; | |
| } | |
| indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*ddata)); | |
| if (!indio_dev) { | |
| dev_err(&pdev->dev, "failed to allocate iio device\n"); | |
| return -ENOMEM; | |
| } | |
| ddata = iio_priv(indio_dev); | |
| ddata->ato = match->data; | |
| ddata->dev = &pdev->dev; | |
| mutex_init(&ddata->lock); | |
| init_waitqueue_head(&ddata->wq_data_avail); | |
| indio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE; | |
| indio_dev->dev.parent = &pdev->dev; | |
| indio_dev->dev.of_node = pdev->dev.of_node; | |
| indio_dev->channels = cpcap_adc_channels; | |
| indio_dev->num_channels = ARRAY_SIZE(cpcap_adc_channels); | |
| indio_dev->name = dev_name(&pdev->dev); | |
| indio_dev->info = &cpcap_adc_info; | |
| ddata->reg = dev_get_regmap(pdev->dev.parent, NULL); | |
| if (!ddata->reg) | |
| return -ENODEV; | |
| error = cpcap_get_vendor(ddata->dev, ddata->reg, &ddata->vendor); | |
| if (error) | |
| return error; | |
| platform_set_drvdata(pdev, indio_dev); | |
| ddata->irq = platform_get_irq_byname(pdev, "adcdone"); | |
| if (!ddata->irq) | |
| return -ENODEV; | |
| error = devm_request_threaded_irq(&pdev->dev, ddata->irq, NULL, | |
| cpcap_adc_irq_thread, | |
| IRQF_TRIGGER_NONE, | |
| "cpcap-adc", indio_dev); | |
| if (error) { | |
| dev_err(&pdev->dev, "could not get irq: %i\n", | |
| error); | |
| return error; | |
| } | |
| error = cpcap_adc_calibrate(ddata); | |
| if (error) | |
| return error; | |
| dev_info(&pdev->dev, "CPCAP ADC device probed\n"); | |
| return devm_iio_device_register(&pdev->dev, indio_dev); | |
| } | |
| static struct platform_driver cpcap_adc_driver = { | |
| .driver = { | |
| .name = "cpcap_adc", | |
| .of_match_table = of_match_ptr(cpcap_adc_id_table), | |
| }, | |
| .probe = cpcap_adc_probe, | |
| }; | |
| module_platform_driver(cpcap_adc_driver); | |
| MODULE_ALIAS("platform:cpcap_adc"); | |
| MODULE_DESCRIPTION("CPCAP ADC driver"); | |
| MODULE_AUTHOR("Tony Lindgren <tony@atomide.com"); | |
| MODULE_LICENSE("GPL v2"); |