| /* | |
| * iio/adc/max11100.c | |
| * Maxim max11100 ADC Driver with IIO interface | |
| * | |
| * Copyright (C) 2016-17 Renesas Electronics Corporation | |
| * Copyright (C) 2016-17 Jacopo Mondi | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| #include <linux/delay.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/regulator/consumer.h> | |
| #include <linux/spi/spi.h> | |
| #include <linux/iio/iio.h> | |
| #include <linux/iio/driver.h> | |
| /* | |
| * LSB is the ADC single digital step | |
| * 1 LSB = (vref_mv / 2 ^ 16) | |
| * | |
| * LSB is used to calculate analog voltage value | |
| * from the number of ADC steps count | |
| * | |
| * Ain = (count * LSB) | |
| */ | |
| #define MAX11100_LSB_DIV (1 << 16) | |
| struct max11100_state { | |
| struct regulator *vref_reg; | |
| struct spi_device *spi; | |
| /* | |
| * DMA (thus cache coherency maintenance) requires the | |
| * transfer buffers to live in their own cache lines. | |
| */ | |
| u8 buffer[3] ____cacheline_aligned; | |
| }; | |
| static struct iio_chan_spec max11100_channels[] = { | |
| { /* [0] */ | |
| .type = IIO_VOLTAGE, | |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | | |
| BIT(IIO_CHAN_INFO_SCALE), | |
| }, | |
| }; | |
| static int max11100_read_single(struct iio_dev *indio_dev, int *val) | |
| { | |
| int ret; | |
| struct max11100_state *state = iio_priv(indio_dev); | |
| ret = spi_read(state->spi, state->buffer, sizeof(state->buffer)); | |
| if (ret) { | |
| dev_err(&indio_dev->dev, "SPI transfer failed\n"); | |
| return ret; | |
| } | |
| /* the first 8 bits sent out from ADC must be 0s */ | |
| if (state->buffer[0]) { | |
| dev_err(&indio_dev->dev, "Invalid value: buffer[0] != 0\n"); | |
| return -EINVAL; | |
| } | |
| *val = (state->buffer[1] << 8) | state->buffer[2]; | |
| return 0; | |
| } | |
| static int max11100_read_raw(struct iio_dev *indio_dev, | |
| struct iio_chan_spec const *chan, | |
| int *val, int *val2, long info) | |
| { | |
| int ret, vref_uv; | |
| struct max11100_state *state = iio_priv(indio_dev); | |
| switch (info) { | |
| case IIO_CHAN_INFO_RAW: | |
| ret = max11100_read_single(indio_dev, val); | |
| if (ret) | |
| return ret; | |
| return IIO_VAL_INT; | |
| case IIO_CHAN_INFO_SCALE: | |
| vref_uv = regulator_get_voltage(state->vref_reg); | |
| if (vref_uv < 0) | |
| /* dummy regulator "get_voltage" returns -EINVAL */ | |
| return -EINVAL; | |
| *val = vref_uv / 1000; | |
| *val2 = MAX11100_LSB_DIV; | |
| return IIO_VAL_FRACTIONAL; | |
| } | |
| return -EINVAL; | |
| } | |
| static const struct iio_info max11100_info = { | |
| .driver_module = THIS_MODULE, | |
| .read_raw = max11100_read_raw, | |
| }; | |
| static int max11100_probe(struct spi_device *spi) | |
| { | |
| int ret; | |
| struct iio_dev *indio_dev; | |
| struct max11100_state *state; | |
| indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*state)); | |
| if (!indio_dev) | |
| return -ENOMEM; | |
| spi_set_drvdata(spi, indio_dev); | |
| state = iio_priv(indio_dev); | |
| state->spi = spi; | |
| indio_dev->dev.parent = &spi->dev; | |
| indio_dev->dev.of_node = spi->dev.of_node; | |
| indio_dev->name = "max11100"; | |
| indio_dev->info = &max11100_info; | |
| indio_dev->modes = INDIO_DIRECT_MODE; | |
| indio_dev->channels = max11100_channels; | |
| indio_dev->num_channels = ARRAY_SIZE(max11100_channels); | |
| state->vref_reg = devm_regulator_get(&spi->dev, "vref"); | |
| if (IS_ERR(state->vref_reg)) | |
| return PTR_ERR(state->vref_reg); | |
| ret = regulator_enable(state->vref_reg); | |
| if (ret) | |
| return ret; | |
| ret = iio_device_register(indio_dev); | |
| if (ret) | |
| goto disable_regulator; | |
| return 0; | |
| disable_regulator: | |
| regulator_disable(state->vref_reg); | |
| return ret; | |
| } | |
| static int max11100_remove(struct spi_device *spi) | |
| { | |
| struct iio_dev *indio_dev = spi_get_drvdata(spi); | |
| struct max11100_state *state = iio_priv(indio_dev); | |
| iio_device_unregister(indio_dev); | |
| regulator_disable(state->vref_reg); | |
| return 0; | |
| } | |
| static const struct of_device_id max11100_ids[] = { | |
| {.compatible = "maxim,max11100"}, | |
| { }, | |
| }; | |
| MODULE_DEVICE_TABLE(of, max11100_ids); | |
| static struct spi_driver max11100_driver = { | |
| .driver = { | |
| .name = "max11100", | |
| .of_match_table = of_match_ptr(max11100_ids), | |
| }, | |
| .probe = max11100_probe, | |
| .remove = max11100_remove, | |
| }; | |
| module_spi_driver(max11100_driver); | |
| MODULE_AUTHOR("Jacopo Mondi <jacopo@jmondi.org>"); | |
| MODULE_DESCRIPTION("Maxim max11100 ADC Driver"); | |
| MODULE_LICENSE("GPL v2"); |