| /* | |
| * tsl4531.c - Support for TAOS TSL4531 ambient light sensor | |
| * | |
| * Copyright 2013 Peter Meerwald <pmeerw@pmeerw.net> | |
| * | |
| * This file is subject to the terms and conditions of version 2 of | |
| * the GNU General Public License. See the file COPYING in the main | |
| * directory of this archive for more details. | |
| * | |
| * IIO driver for the TSL4531x family | |
| * TSL45311/TSL45313: 7-bit I2C slave address 0x39 | |
| * TSL45315/TSL45317: 7-bit I2C slave address 0x29 | |
| * | |
| * TODO: single cycle measurement | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/i2c.h> | |
| #include <linux/err.h> | |
| #include <linux/delay.h> | |
| #include <linux/iio/iio.h> | |
| #include <linux/iio/sysfs.h> | |
| #define TSL4531_DRV_NAME "tsl4531" | |
| #define TSL4531_COMMAND BIT(7) | |
| #define TSL4531_CONTROL (TSL4531_COMMAND | 0x00) | |
| #define TSL4531_CONFIG (TSL4531_COMMAND | 0x01) | |
| #define TSL4531_DATA (TSL4531_COMMAND | 0x04) | |
| #define TSL4531_ID (TSL4531_COMMAND | 0x0a) | |
| /* operating modes in control register */ | |
| #define TSL4531_MODE_POWERDOWN 0x00 | |
| #define TSL4531_MODE_SINGLE_ADC 0x02 | |
| #define TSL4531_MODE_NORMAL 0x03 | |
| /* integration time control in config register */ | |
| #define TSL4531_TCNTRL_400MS 0x00 | |
| #define TSL4531_TCNTRL_200MS 0x01 | |
| #define TSL4531_TCNTRL_100MS 0x02 | |
| /* part number in id register */ | |
| #define TSL45311_ID 0x8 | |
| #define TSL45313_ID 0x9 | |
| #define TSL45315_ID 0xa | |
| #define TSL45317_ID 0xb | |
| #define TSL4531_ID_SHIFT 4 | |
| struct tsl4531_data { | |
| struct i2c_client *client; | |
| struct mutex lock; | |
| int int_time; | |
| }; | |
| static IIO_CONST_ATTR_INT_TIME_AVAIL("0.1 0.2 0.4"); | |
| static struct attribute *tsl4531_attributes[] = { | |
| &iio_const_attr_integration_time_available.dev_attr.attr, | |
| NULL | |
| }; | |
| static const struct attribute_group tsl4531_attribute_group = { | |
| .attrs = tsl4531_attributes, | |
| }; | |
| static const struct iio_chan_spec tsl4531_channels[] = { | |
| { | |
| .type = IIO_LIGHT, | |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | | |
| BIT(IIO_CHAN_INFO_SCALE) | | |
| BIT(IIO_CHAN_INFO_INT_TIME) | |
| } | |
| }; | |
| static int tsl4531_read_raw(struct iio_dev *indio_dev, | |
| struct iio_chan_spec const *chan, | |
| int *val, int *val2, long mask) | |
| { | |
| struct tsl4531_data *data = iio_priv(indio_dev); | |
| int ret; | |
| switch (mask) { | |
| case IIO_CHAN_INFO_RAW: | |
| ret = i2c_smbus_read_word_data(data->client, | |
| TSL4531_DATA); | |
| if (ret < 0) | |
| return ret; | |
| *val = ret; | |
| return IIO_VAL_INT; | |
| case IIO_CHAN_INFO_SCALE: | |
| /* 0.. 1x, 1 .. 2x, 2 .. 4x */ | |
| *val = 1 << data->int_time; | |
| return IIO_VAL_INT; | |
| case IIO_CHAN_INFO_INT_TIME: | |
| if (data->int_time == 0) | |
| *val2 = 400000; | |
| else if (data->int_time == 1) | |
| *val2 = 200000; | |
| else if (data->int_time == 2) | |
| *val2 = 100000; | |
| else | |
| return -EINVAL; | |
| *val = 0; | |
| return IIO_VAL_INT_PLUS_MICRO; | |
| default: | |
| return -EINVAL; | |
| } | |
| } | |
| static int tsl4531_write_raw(struct iio_dev *indio_dev, | |
| struct iio_chan_spec const *chan, | |
| int val, int val2, long mask) | |
| { | |
| struct tsl4531_data *data = iio_priv(indio_dev); | |
| int int_time, ret; | |
| switch (mask) { | |
| case IIO_CHAN_INFO_INT_TIME: | |
| if (val != 0) | |
| return -EINVAL; | |
| if (val2 == 400000) | |
| int_time = 0; | |
| else if (val2 == 200000) | |
| int_time = 1; | |
| else if (val2 == 100000) | |
| int_time = 2; | |
| else | |
| return -EINVAL; | |
| mutex_lock(&data->lock); | |
| ret = i2c_smbus_write_byte_data(data->client, | |
| TSL4531_CONFIG, int_time); | |
| if (ret >= 0) | |
| data->int_time = int_time; | |
| mutex_unlock(&data->lock); | |
| return ret; | |
| default: | |
| return -EINVAL; | |
| } | |
| } | |
| static const struct iio_info tsl4531_info = { | |
| .read_raw = tsl4531_read_raw, | |
| .write_raw = tsl4531_write_raw, | |
| .attrs = &tsl4531_attribute_group, | |
| .driver_module = THIS_MODULE, | |
| }; | |
| static int tsl4531_check_id(struct i2c_client *client) | |
| { | |
| int ret = i2c_smbus_read_byte_data(client, TSL4531_ID); | |
| if (ret < 0) | |
| return ret; | |
| switch (ret >> TSL4531_ID_SHIFT) { | |
| case TSL45311_ID: | |
| case TSL45313_ID: | |
| case TSL45315_ID: | |
| case TSL45317_ID: | |
| return 0; | |
| default: | |
| return -ENODEV; | |
| } | |
| } | |
| static int tsl4531_probe(struct i2c_client *client, | |
| const struct i2c_device_id *id) | |
| { | |
| struct tsl4531_data *data; | |
| struct iio_dev *indio_dev; | |
| int ret; | |
| indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); | |
| if (!indio_dev) | |
| return -ENOMEM; | |
| data = iio_priv(indio_dev); | |
| i2c_set_clientdata(client, indio_dev); | |
| data->client = client; | |
| mutex_init(&data->lock); | |
| ret = tsl4531_check_id(client); | |
| if (ret) { | |
| dev_err(&client->dev, "no TSL4531 sensor\n"); | |
| return ret; | |
| } | |
| ret = i2c_smbus_write_byte_data(data->client, TSL4531_CONTROL, | |
| TSL4531_MODE_NORMAL); | |
| if (ret < 0) | |
| return ret; | |
| ret = i2c_smbus_write_byte_data(data->client, TSL4531_CONFIG, | |
| TSL4531_TCNTRL_400MS); | |
| if (ret < 0) | |
| return ret; | |
| indio_dev->dev.parent = &client->dev; | |
| indio_dev->info = &tsl4531_info; | |
| indio_dev->channels = tsl4531_channels; | |
| indio_dev->num_channels = ARRAY_SIZE(tsl4531_channels); | |
| indio_dev->name = TSL4531_DRV_NAME; | |
| indio_dev->modes = INDIO_DIRECT_MODE; | |
| return iio_device_register(indio_dev); | |
| } | |
| static int tsl4531_powerdown(struct i2c_client *client) | |
| { | |
| return i2c_smbus_write_byte_data(client, TSL4531_CONTROL, | |
| TSL4531_MODE_POWERDOWN); | |
| } | |
| static int tsl4531_remove(struct i2c_client *client) | |
| { | |
| iio_device_unregister(i2c_get_clientdata(client)); | |
| tsl4531_powerdown(client); | |
| return 0; | |
| } | |
| #ifdef CONFIG_PM_SLEEP | |
| static int tsl4531_suspend(struct device *dev) | |
| { | |
| return tsl4531_powerdown(to_i2c_client(dev)); | |
| } | |
| static int tsl4531_resume(struct device *dev) | |
| { | |
| return i2c_smbus_write_byte_data(to_i2c_client(dev), TSL4531_CONTROL, | |
| TSL4531_MODE_NORMAL); | |
| } | |
| static SIMPLE_DEV_PM_OPS(tsl4531_pm_ops, tsl4531_suspend, tsl4531_resume); | |
| #define TSL4531_PM_OPS (&tsl4531_pm_ops) | |
| #else | |
| #define TSL4531_PM_OPS NULL | |
| #endif | |
| static const struct i2c_device_id tsl4531_id[] = { | |
| { "tsl4531", 0 }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(i2c, tsl4531_id); | |
| static struct i2c_driver tsl4531_driver = { | |
| .driver = { | |
| .name = TSL4531_DRV_NAME, | |
| .pm = TSL4531_PM_OPS, | |
| }, | |
| .probe = tsl4531_probe, | |
| .remove = tsl4531_remove, | |
| .id_table = tsl4531_id, | |
| }; | |
| module_i2c_driver(tsl4531_driver); | |
| MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>"); | |
| MODULE_DESCRIPTION("TAOS TSL4531 ambient light sensors driver"); | |
| MODULE_LICENSE("GPL"); |