| /* saa711x - Philips SAA711x video decoder driver | |
| * This driver can work with saa7111, saa7111a, saa7113, saa7114, | |
| * saa7115 and saa7118. | |
| * | |
| * Based on saa7114 driver by Maxim Yevtyushkin, which is based on | |
| * the saa7111 driver by Dave Perks. | |
| * | |
| * Copyright (C) 1998 Dave Perks <dperks@ibm.net> | |
| * Copyright (C) 2002 Maxim Yevtyushkin <max@linuxmedialabs.com> | |
| * | |
| * Slight changes for video timing and attachment output by | |
| * Wolfgang Scherr <scherr@net4you.net> | |
| * | |
| * Moved over to the linux >= 2.4.x i2c protocol (1/1/2003) | |
| * by Ronald Bultje <rbultje@ronald.bitfreak.net> | |
| * | |
| * Added saa7115 support by Kevin Thayer <nufan_wfk at yahoo.com> | |
| * (2/17/2003) | |
| * | |
| * VBI support (2004) and cleanups (2005) by Hans Verkuil <hverkuil@xs4all.nl> | |
| * | |
| * Copyright (c) 2005-2006 Mauro Carvalho Chehab <mchehab@infradead.org> | |
| * SAA7111, SAA7113 and SAA7118 support | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * as published by the Free Software Foundation; either version 2 | |
| * of the License, or (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| */ | |
| #include "saa711x_regs.h" | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/slab.h> | |
| #include <linux/i2c.h> | |
| #include <linux/videodev2.h> | |
| #include <media/v4l2-device.h> | |
| #include <media/v4l2-ctrls.h> | |
| #include <media/v4l2-mc.h> | |
| #include <media/i2c/saa7115.h> | |
| #include <asm/div64.h> | |
| #define VRES_60HZ (480+16) | |
| MODULE_DESCRIPTION("Philips SAA7111/SAA7113/SAA7114/SAA7115/SAA7118 video decoder driver"); | |
| MODULE_AUTHOR( "Maxim Yevtyushkin, Kevin Thayer, Chris Kennedy, " | |
| "Hans Verkuil, Mauro Carvalho Chehab"); | |
| MODULE_LICENSE("GPL"); | |
| static bool debug; | |
| module_param(debug, bool, 0644); | |
| MODULE_PARM_DESC(debug, "Debug level (0-1)"); | |
| enum saa711x_model { | |
| SAA7111A, | |
| SAA7111, | |
| SAA7113, | |
| GM7113C, | |
| SAA7114, | |
| SAA7115, | |
| SAA7118, | |
| }; | |
| struct saa711x_state { | |
| struct v4l2_subdev sd; | |
| #ifdef CONFIG_MEDIA_CONTROLLER | |
| struct media_pad pads[DEMOD_NUM_PADS]; | |
| #endif | |
| struct v4l2_ctrl_handler hdl; | |
| struct { | |
| /* chroma gain control cluster */ | |
| struct v4l2_ctrl *agc; | |
| struct v4l2_ctrl *gain; | |
| }; | |
| v4l2_std_id std; | |
| int input; | |
| int output; | |
| int enable; | |
| int radio; | |
| int width; | |
| int height; | |
| enum saa711x_model ident; | |
| u32 audclk_freq; | |
| u32 crystal_freq; | |
| bool ucgc; | |
| u8 cgcdiv; | |
| bool apll; | |
| bool double_asclk; | |
| }; | |
| static inline struct saa711x_state *to_state(struct v4l2_subdev *sd) | |
| { | |
| return container_of(sd, struct saa711x_state, sd); | |
| } | |
| static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) | |
| { | |
| return &container_of(ctrl->handler, struct saa711x_state, hdl)->sd; | |
| } | |
| /* ----------------------------------------------------------------------- */ | |
| static inline int saa711x_write(struct v4l2_subdev *sd, u8 reg, u8 value) | |
| { | |
| struct i2c_client *client = v4l2_get_subdevdata(sd); | |
| return i2c_smbus_write_byte_data(client, reg, value); | |
| } | |
| /* Sanity routine to check if a register is present */ | |
| static int saa711x_has_reg(const int id, const u8 reg) | |
| { | |
| if (id == SAA7111) | |
| return reg < 0x20 && reg != 0x01 && reg != 0x0f && | |
| (reg < 0x13 || reg > 0x19) && reg != 0x1d && reg != 0x1e; | |
| if (id == SAA7111A) | |
| return reg < 0x20 && reg != 0x01 && reg != 0x0f && | |
| reg != 0x14 && reg != 0x18 && reg != 0x19 && | |
| reg != 0x1d && reg != 0x1e; | |
| /* common for saa7113/4/5/8 */ | |
| if (unlikely((reg >= 0x3b && reg <= 0x3f) || reg == 0x5c || reg == 0x5f || | |
| reg == 0xa3 || reg == 0xa7 || reg == 0xab || reg == 0xaf || (reg >= 0xb5 && reg <= 0xb7) || | |
| reg == 0xd3 || reg == 0xd7 || reg == 0xdb || reg == 0xdf || (reg >= 0xe5 && reg <= 0xe7) || | |
| reg == 0x82 || (reg >= 0x89 && reg <= 0x8e))) | |
| return 0; | |
| switch (id) { | |
| case GM7113C: | |
| return reg != 0x14 && (reg < 0x18 || reg > 0x1e) && reg < 0x20; | |
| case SAA7113: | |
| return reg != 0x14 && (reg < 0x18 || reg > 0x1e) && (reg < 0x20 || reg > 0x3f) && | |
| reg != 0x5d && reg < 0x63; | |
| case SAA7114: | |
| return (reg < 0x1a || reg > 0x1e) && (reg < 0x20 || reg > 0x2f) && | |
| (reg < 0x63 || reg > 0x7f) && reg != 0x33 && reg != 0x37 && | |
| reg != 0x81 && reg < 0xf0; | |
| case SAA7115: | |
| return (reg < 0x20 || reg > 0x2f) && reg != 0x65 && (reg < 0xfc || reg > 0xfe); | |
| case SAA7118: | |
| return (reg < 0x1a || reg > 0x1d) && (reg < 0x20 || reg > 0x22) && | |
| (reg < 0x26 || reg > 0x28) && reg != 0x33 && reg != 0x37 && | |
| (reg < 0x63 || reg > 0x7f) && reg != 0x81 && reg < 0xf0; | |
| } | |
| return 1; | |
| } | |
| static int saa711x_writeregs(struct v4l2_subdev *sd, const unsigned char *regs) | |
| { | |
| struct saa711x_state *state = to_state(sd); | |
| unsigned char reg, data; | |
| while (*regs != 0x00) { | |
| reg = *(regs++); | |
| data = *(regs++); | |
| /* According with datasheets, reserved regs should be | |
| filled with 0 - seems better not to touch on they */ | |
| if (saa711x_has_reg(state->ident, reg)) { | |
| if (saa711x_write(sd, reg, data) < 0) | |
| return -1; | |
| } else { | |
| v4l2_dbg(1, debug, sd, "tried to access reserved reg 0x%02x\n", reg); | |
| } | |
| } | |
| return 0; | |
| } | |
| static inline int saa711x_read(struct v4l2_subdev *sd, u8 reg) | |
| { | |
| struct i2c_client *client = v4l2_get_subdevdata(sd); | |
| return i2c_smbus_read_byte_data(client, reg); | |
| } | |
| /* ----------------------------------------------------------------------- */ | |
| /* SAA7111 initialization table */ | |
| static const unsigned char saa7111_init[] = { | |
| R_01_INC_DELAY, 0x00, /* reserved */ | |
| /*front end */ | |
| R_02_INPUT_CNTL_1, 0xd0, /* FUSE=3, GUDL=2, MODE=0 */ | |
| R_03_INPUT_CNTL_2, 0x23, /* HLNRS=0, VBSL=1, WPOFF=0, HOLDG=0, | |
| * GAFIX=0, GAI1=256, GAI2=256 */ | |
| R_04_INPUT_CNTL_3, 0x00, /* GAI1=256 */ | |
| R_05_INPUT_CNTL_4, 0x00, /* GAI2=256 */ | |
| /* decoder */ | |
| R_06_H_SYNC_START, 0xf3, /* HSB at 13(50Hz) / 17(60Hz) | |
| * pixels after end of last line */ | |
| R_07_H_SYNC_STOP, 0xe8, /* HSS seems to be needed to | |
| * work with NTSC, too */ | |
| R_08_SYNC_CNTL, 0xc8, /* AUFD=1, FSEL=1, EXFIL=0, | |
| * VTRC=1, HPLL=0, VNOI=0 */ | |
| R_09_LUMA_CNTL, 0x01, /* BYPS=0, PREF=0, BPSS=0, | |
| * VBLB=0, UPTCV=0, APER=1 */ | |
| R_0A_LUMA_BRIGHT_CNTL, 0x80, | |
| R_0B_LUMA_CONTRAST_CNTL, 0x47, /* 0b - CONT=1.109 */ | |
| R_0C_CHROMA_SAT_CNTL, 0x40, | |
| R_0D_CHROMA_HUE_CNTL, 0x00, | |
| R_0E_CHROMA_CNTL_1, 0x01, /* 0e - CDTO=0, CSTD=0, DCCF=0, | |
| * FCTC=0, CHBW=1 */ | |
| R_0F_CHROMA_GAIN_CNTL, 0x00, /* reserved */ | |
| R_10_CHROMA_CNTL_2, 0x48, /* 10 - OFTS=1, HDEL=0, VRLN=1, YDEL=0 */ | |
| R_11_MODE_DELAY_CNTL, 0x1c, /* 11 - GPSW=0, CM99=0, FECO=0, COMPO=1, | |
| * OEYC=1, OEHV=1, VIPB=0, COLO=0 */ | |
| R_12_RT_SIGNAL_CNTL, 0x00, /* 12 - output control 2 */ | |
| R_13_RT_X_PORT_OUT_CNTL, 0x00, /* 13 - output control 3 */ | |
| R_14_ANAL_ADC_COMPAT_CNTL, 0x00, | |
| R_15_VGATE_START_FID_CHG, 0x00, | |
| R_16_VGATE_STOP, 0x00, | |
| R_17_MISC_VGATE_CONF_AND_MSB, 0x00, | |
| 0x00, 0x00 | |
| }; | |
| /* | |
| * This table has one illegal value, and some values that are not | |
| * correct according to the datasheet initialization table. | |
| * | |
| * If you need a table with legal/default values tell the driver in | |
| * i2c_board_info.platform_data, and you will get the gm7113c_init | |
| * table instead. | |
| */ | |
| /* SAA7113 Init codes */ | |
| static const unsigned char saa7113_init[] = { | |
| R_01_INC_DELAY, 0x08, | |
| R_02_INPUT_CNTL_1, 0xc2, | |
| R_03_INPUT_CNTL_2, 0x30, | |
| R_04_INPUT_CNTL_3, 0x00, | |
| R_05_INPUT_CNTL_4, 0x00, | |
| R_06_H_SYNC_START, 0x89, /* Illegal value -119, | |
| * min. value = -108 (0x94) */ | |
| R_07_H_SYNC_STOP, 0x0d, | |
| R_08_SYNC_CNTL, 0x88, /* Not datasheet default. | |
| * HTC = VTR mode, should be 0x98 */ | |
| R_09_LUMA_CNTL, 0x01, | |
| R_0A_LUMA_BRIGHT_CNTL, 0x80, | |
| R_0B_LUMA_CONTRAST_CNTL, 0x47, | |
| R_0C_CHROMA_SAT_CNTL, 0x40, | |
| R_0D_CHROMA_HUE_CNTL, 0x00, | |
| R_0E_CHROMA_CNTL_1, 0x01, | |
| R_0F_CHROMA_GAIN_CNTL, 0x2a, | |
| R_10_CHROMA_CNTL_2, 0x08, /* Not datsheet default. | |
| * VRLN enabled, should be 0x00 */ | |
| R_11_MODE_DELAY_CNTL, 0x0c, | |
| R_12_RT_SIGNAL_CNTL, 0x07, /* Not datasheet default, | |
| * should be 0x01 */ | |
| R_13_RT_X_PORT_OUT_CNTL, 0x00, | |
| R_14_ANAL_ADC_COMPAT_CNTL, 0x00, | |
| R_15_VGATE_START_FID_CHG, 0x00, | |
| R_16_VGATE_STOP, 0x00, | |
| R_17_MISC_VGATE_CONF_AND_MSB, 0x00, | |
| 0x00, 0x00 | |
| }; | |
| /* | |
| * GM7113C is a clone of the SAA7113 chip | |
| * This init table is copied out of the saa7113 datasheet. | |
| * In R_08 we enable "Automatic Field Detection" [AUFD], | |
| * this is disabled when saa711x_set_v4lstd is called. | |
| */ | |
| static const unsigned char gm7113c_init[] = { | |
| R_01_INC_DELAY, 0x08, | |
| R_02_INPUT_CNTL_1, 0xc0, | |
| R_03_INPUT_CNTL_2, 0x33, | |
| R_04_INPUT_CNTL_3, 0x00, | |
| R_05_INPUT_CNTL_4, 0x00, | |
| R_06_H_SYNC_START, 0xe9, | |
| R_07_H_SYNC_STOP, 0x0d, | |
| R_08_SYNC_CNTL, 0x98, | |
| R_09_LUMA_CNTL, 0x01, | |
| R_0A_LUMA_BRIGHT_CNTL, 0x80, | |
| R_0B_LUMA_CONTRAST_CNTL, 0x47, | |
| R_0C_CHROMA_SAT_CNTL, 0x40, | |
| R_0D_CHROMA_HUE_CNTL, 0x00, | |
| R_0E_CHROMA_CNTL_1, 0x01, | |
| R_0F_CHROMA_GAIN_CNTL, 0x2a, | |
| R_10_CHROMA_CNTL_2, 0x00, | |
| R_11_MODE_DELAY_CNTL, 0x0c, | |
| R_12_RT_SIGNAL_CNTL, 0x01, | |
| R_13_RT_X_PORT_OUT_CNTL, 0x00, | |
| R_14_ANAL_ADC_COMPAT_CNTL, 0x00, | |
| R_15_VGATE_START_FID_CHG, 0x00, | |
| R_16_VGATE_STOP, 0x00, | |
| R_17_MISC_VGATE_CONF_AND_MSB, 0x00, | |
| 0x00, 0x00 | |
| }; | |
| /* If a value differs from the Hauppauge driver values, then the comment starts with | |
| 'was 0xXX' to denote the Hauppauge value. Otherwise the value is identical to what the | |
| Hauppauge driver sets. */ | |
| /* SAA7114 and SAA7115 initialization table */ | |
| static const unsigned char saa7115_init_auto_input[] = { | |
| /* Front-End Part */ | |
| R_01_INC_DELAY, 0x48, /* white peak control disabled */ | |
| R_03_INPUT_CNTL_2, 0x20, /* was 0x30. 0x20: long vertical blanking */ | |
| R_04_INPUT_CNTL_3, 0x90, /* analog gain set to 0 */ | |
| R_05_INPUT_CNTL_4, 0x90, /* analog gain set to 0 */ | |
| /* Decoder Part */ | |
| R_06_H_SYNC_START, 0xeb, /* horiz sync begin = -21 */ | |
| R_07_H_SYNC_STOP, 0xe0, /* horiz sync stop = -17 */ | |
| R_09_LUMA_CNTL, 0x53, /* 0x53, was 0x56 for 60hz. luminance control */ | |
| R_0A_LUMA_BRIGHT_CNTL, 0x80, /* was 0x88. decoder brightness, 0x80 is itu standard */ | |
| R_0B_LUMA_CONTRAST_CNTL, 0x44, /* was 0x48. decoder contrast, 0x44 is itu standard */ | |
| R_0C_CHROMA_SAT_CNTL, 0x40, /* was 0x47. decoder saturation, 0x40 is itu standard */ | |
| R_0D_CHROMA_HUE_CNTL, 0x00, | |
| R_0F_CHROMA_GAIN_CNTL, 0x00, /* use automatic gain */ | |
| R_10_CHROMA_CNTL_2, 0x06, /* chroma: active adaptive combfilter */ | |
| R_11_MODE_DELAY_CNTL, 0x00, | |
| R_12_RT_SIGNAL_CNTL, 0x9d, /* RTS0 output control: VGATE */ | |
| R_13_RT_X_PORT_OUT_CNTL, 0x80, /* ITU656 standard mode, RTCO output enable RTCE */ | |
| R_14_ANAL_ADC_COMPAT_CNTL, 0x00, | |
| R_18_RAW_DATA_GAIN_CNTL, 0x40, /* gain 0x00 = nominal */ | |
| R_19_RAW_DATA_OFF_CNTL, 0x80, | |
| R_1A_COLOR_KILL_LVL_CNTL, 0x77, /* recommended value */ | |
| R_1B_MISC_TVVCRDET, 0x42, /* recommended value */ | |
| R_1C_ENHAN_COMB_CTRL1, 0xa9, /* recommended value */ | |
| R_1D_ENHAN_COMB_CTRL2, 0x01, /* recommended value */ | |
| R_80_GLOBAL_CNTL_1, 0x0, /* No tasks enabled at init */ | |
| /* Power Device Control */ | |
| R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset device */ | |
| R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0, /* set device programmed, all in operational mode */ | |
| 0x00, 0x00 | |
| }; | |
| /* Used to reset saa7113, saa7114 and saa7115 */ | |
| static const unsigned char saa7115_cfg_reset_scaler[] = { | |
| R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x00, /* disable I-port output */ | |
| R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset scaler */ | |
| R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0, /* activate scaler */ | |
| R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01, /* enable I-port output */ | |
| 0x00, 0x00 | |
| }; | |
| /* ============== SAA7715 VIDEO templates ============= */ | |
| static const unsigned char saa7115_cfg_60hz_video[] = { | |
| R_80_GLOBAL_CNTL_1, 0x00, /* reset tasks */ | |
| R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset scaler */ | |
| R_15_VGATE_START_FID_CHG, 0x03, | |
| R_16_VGATE_STOP, 0x11, | |
| R_17_MISC_VGATE_CONF_AND_MSB, 0x9c, | |
| R_08_SYNC_CNTL, 0x68, /* 0xBO: auto detection, 0x68 = NTSC */ | |
| R_0E_CHROMA_CNTL_1, 0x07, /* video autodetection is on */ | |
| R_5A_V_OFF_FOR_SLICER, 0x06, /* standard 60hz value for ITU656 line counting */ | |
| /* Task A */ | |
| R_90_A_TASK_HANDLING_CNTL, 0x80, | |
| R_91_A_X_PORT_FORMATS_AND_CONF, 0x48, | |
| R_92_A_X_PORT_INPUT_REFERENCE_SIGNAL, 0x40, | |
| R_93_A_I_PORT_OUTPUT_FORMATS_AND_CONF, 0x84, | |
| /* hoffset low (input), 0x0002 is minimum */ | |
| R_94_A_HORIZ_INPUT_WINDOW_START, 0x01, | |
| R_95_A_HORIZ_INPUT_WINDOW_START_MSB, 0x00, | |
| /* hsize low (input), 0x02d0 = 720 */ | |
| R_96_A_HORIZ_INPUT_WINDOW_LENGTH, 0xd0, | |
| R_97_A_HORIZ_INPUT_WINDOW_LENGTH_MSB, 0x02, | |
| R_98_A_VERT_INPUT_WINDOW_START, 0x05, | |
| R_99_A_VERT_INPUT_WINDOW_START_MSB, 0x00, | |
| R_9A_A_VERT_INPUT_WINDOW_LENGTH, 0x0c, | |
| R_9B_A_VERT_INPUT_WINDOW_LENGTH_MSB, 0x00, | |
| R_9C_A_HORIZ_OUTPUT_WINDOW_LENGTH, 0xa0, | |
| R_9D_A_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x05, | |
| R_9E_A_VERT_OUTPUT_WINDOW_LENGTH, 0x0c, | |
| R_9F_A_VERT_OUTPUT_WINDOW_LENGTH_MSB, 0x00, | |
| /* Task B */ | |
| R_C0_B_TASK_HANDLING_CNTL, 0x00, | |
| R_C1_B_X_PORT_FORMATS_AND_CONF, 0x08, | |
| R_C2_B_INPUT_REFERENCE_SIGNAL_DEFINITION, 0x00, | |
| R_C3_B_I_PORT_FORMATS_AND_CONF, 0x80, | |
| /* 0x0002 is minimum */ | |
| R_C4_B_HORIZ_INPUT_WINDOW_START, 0x02, | |
| R_C5_B_HORIZ_INPUT_WINDOW_START_MSB, 0x00, | |
| /* 0x02d0 = 720 */ | |
| R_C6_B_HORIZ_INPUT_WINDOW_LENGTH, 0xd0, | |
| R_C7_B_HORIZ_INPUT_WINDOW_LENGTH_MSB, 0x02, | |
| /* vwindow start 0x12 = 18 */ | |
| R_C8_B_VERT_INPUT_WINDOW_START, 0x12, | |
| R_C9_B_VERT_INPUT_WINDOW_START_MSB, 0x00, | |
| /* vwindow length 0xf8 = 248 */ | |
| R_CA_B_VERT_INPUT_WINDOW_LENGTH, VRES_60HZ>>1, | |
| R_CB_B_VERT_INPUT_WINDOW_LENGTH_MSB, VRES_60HZ>>9, | |
| /* hwindow 0x02d0 = 720 */ | |
| R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH, 0xd0, | |
| R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x02, | |
| R_F0_LFCO_PER_LINE, 0xad, /* Set PLL Register. 60hz 525 lines per frame, 27 MHz */ | |
| R_F1_P_I_PARAM_SELECT, 0x05, /* low bit with 0xF0 */ | |
| R_F5_PULSGEN_LINE_LENGTH, 0xad, | |
| R_F6_PULSE_A_POS_LSB_AND_PULSEGEN_CONFIG, 0x01, | |
| 0x00, 0x00 | |
| }; | |
| static const unsigned char saa7115_cfg_50hz_video[] = { | |
| R_80_GLOBAL_CNTL_1, 0x00, | |
| R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset scaler */ | |
| R_15_VGATE_START_FID_CHG, 0x37, /* VGATE start */ | |
| R_16_VGATE_STOP, 0x16, | |
| R_17_MISC_VGATE_CONF_AND_MSB, 0x99, | |
| R_08_SYNC_CNTL, 0x28, /* 0x28 = PAL */ | |
| R_0E_CHROMA_CNTL_1, 0x07, | |
| R_5A_V_OFF_FOR_SLICER, 0x03, /* standard 50hz value */ | |
| /* Task A */ | |
| R_90_A_TASK_HANDLING_CNTL, 0x81, | |
| R_91_A_X_PORT_FORMATS_AND_CONF, 0x48, | |
| R_92_A_X_PORT_INPUT_REFERENCE_SIGNAL, 0x40, | |
| R_93_A_I_PORT_OUTPUT_FORMATS_AND_CONF, 0x84, | |
| /* This is weird: the datasheet says that you should use 2 as the minimum value, */ | |
| /* but Hauppauge uses 0, and changing that to 2 causes indeed problems (for 50hz) */ | |
| /* hoffset low (input), 0x0002 is minimum */ | |
| R_94_A_HORIZ_INPUT_WINDOW_START, 0x00, | |
| R_95_A_HORIZ_INPUT_WINDOW_START_MSB, 0x00, | |
| /* hsize low (input), 0x02d0 = 720 */ | |
| R_96_A_HORIZ_INPUT_WINDOW_LENGTH, 0xd0, | |
| R_97_A_HORIZ_INPUT_WINDOW_LENGTH_MSB, 0x02, | |
| R_98_A_VERT_INPUT_WINDOW_START, 0x03, | |
| R_99_A_VERT_INPUT_WINDOW_START_MSB, 0x00, | |
| /* vsize 0x12 = 18 */ | |
| R_9A_A_VERT_INPUT_WINDOW_LENGTH, 0x12, | |
| R_9B_A_VERT_INPUT_WINDOW_LENGTH_MSB, 0x00, | |
| /* hsize 0x05a0 = 1440 */ | |
| R_9C_A_HORIZ_OUTPUT_WINDOW_LENGTH, 0xa0, | |
| R_9D_A_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x05, /* hsize hi (output) */ | |
| R_9E_A_VERT_OUTPUT_WINDOW_LENGTH, 0x12, /* vsize low (output), 0x12 = 18 */ | |
| R_9F_A_VERT_OUTPUT_WINDOW_LENGTH_MSB, 0x00, /* vsize hi (output) */ | |
| /* Task B */ | |
| R_C0_B_TASK_HANDLING_CNTL, 0x00, | |
| R_C1_B_X_PORT_FORMATS_AND_CONF, 0x08, | |
| R_C2_B_INPUT_REFERENCE_SIGNAL_DEFINITION, 0x00, | |
| R_C3_B_I_PORT_FORMATS_AND_CONF, 0x80, | |
| /* This is weird: the datasheet says that you should use 2 as the minimum value, */ | |
| /* but Hauppauge uses 0, and changing that to 2 causes indeed problems (for 50hz) */ | |
| /* hoffset low (input), 0x0002 is minimum. See comment above. */ | |
| R_C4_B_HORIZ_INPUT_WINDOW_START, 0x00, | |
| R_C5_B_HORIZ_INPUT_WINDOW_START_MSB, 0x00, | |
| /* hsize 0x02d0 = 720 */ | |
| R_C6_B_HORIZ_INPUT_WINDOW_LENGTH, 0xd0, | |
| R_C7_B_HORIZ_INPUT_WINDOW_LENGTH_MSB, 0x02, | |
| /* voffset 0x16 = 22 */ | |
| R_C8_B_VERT_INPUT_WINDOW_START, 0x16, | |
| R_C9_B_VERT_INPUT_WINDOW_START_MSB, 0x00, | |
| /* vsize 0x0120 = 288 */ | |
| R_CA_B_VERT_INPUT_WINDOW_LENGTH, 0x20, | |
| R_CB_B_VERT_INPUT_WINDOW_LENGTH_MSB, 0x01, | |
| /* hsize 0x02d0 = 720 */ | |
| R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH, 0xd0, | |
| R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x02, | |
| R_F0_LFCO_PER_LINE, 0xb0, /* Set PLL Register. 50hz 625 lines per frame, 27 MHz */ | |
| R_F1_P_I_PARAM_SELECT, 0x05, /* low bit with 0xF0, (was 0x05) */ | |
| R_F5_PULSGEN_LINE_LENGTH, 0xb0, | |
| R_F6_PULSE_A_POS_LSB_AND_PULSEGEN_CONFIG, 0x01, | |
| 0x00, 0x00 | |
| }; | |
| /* ============== SAA7715 VIDEO templates (end) ======= */ | |
| static const unsigned char saa7115_cfg_vbi_on[] = { | |
| R_80_GLOBAL_CNTL_1, 0x00, /* reset tasks */ | |
| R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset scaler */ | |
| R_80_GLOBAL_CNTL_1, 0x30, /* Activate both tasks */ | |
| R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0, /* activate scaler */ | |
| R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01, /* Enable I-port output */ | |
| 0x00, 0x00 | |
| }; | |
| static const unsigned char saa7115_cfg_vbi_off[] = { | |
| R_80_GLOBAL_CNTL_1, 0x00, /* reset tasks */ | |
| R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset scaler */ | |
| R_80_GLOBAL_CNTL_1, 0x20, /* Activate only task "B" */ | |
| R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0, /* activate scaler */ | |
| R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01, /* Enable I-port output */ | |
| 0x00, 0x00 | |
| }; | |
| static const unsigned char saa7115_init_misc[] = { | |
| R_81_V_SYNC_FLD_ID_SRC_SEL_AND_RETIMED_V_F, 0x01, | |
| R_83_X_PORT_I_O_ENA_AND_OUT_CLK, 0x01, | |
| R_84_I_PORT_SIGNAL_DEF, 0x20, | |
| R_85_I_PORT_SIGNAL_POLAR, 0x21, | |
| R_86_I_PORT_FIFO_FLAG_CNTL_AND_ARBIT, 0xc5, | |
| R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01, | |
| /* Task A */ | |
| R_A0_A_HORIZ_PRESCALING, 0x01, | |
| R_A1_A_ACCUMULATION_LENGTH, 0x00, | |
| R_A2_A_PRESCALER_DC_GAIN_AND_FIR_PREFILTER, 0x00, | |
| /* Configure controls at nominal value*/ | |
| R_A4_A_LUMA_BRIGHTNESS_CNTL, 0x80, | |
| R_A5_A_LUMA_CONTRAST_CNTL, 0x40, | |
| R_A6_A_CHROMA_SATURATION_CNTL, 0x40, | |
| /* note: 2 x zoom ensures that VBI lines have same length as video lines. */ | |
| R_A8_A_HORIZ_LUMA_SCALING_INC, 0x00, | |
| R_A9_A_HORIZ_LUMA_SCALING_INC_MSB, 0x02, | |
| R_AA_A_HORIZ_LUMA_PHASE_OFF, 0x00, | |
| /* must be horiz lum scaling / 2 */ | |
| R_AC_A_HORIZ_CHROMA_SCALING_INC, 0x00, | |
| R_AD_A_HORIZ_CHROMA_SCALING_INC_MSB, 0x01, | |
| /* must be offset luma / 2 */ | |
| R_AE_A_HORIZ_CHROMA_PHASE_OFF, 0x00, | |
| R_B0_A_VERT_LUMA_SCALING_INC, 0x00, | |
| R_B1_A_VERT_LUMA_SCALING_INC_MSB, 0x04, | |
| R_B2_A_VERT_CHROMA_SCALING_INC, 0x00, | |
| R_B3_A_VERT_CHROMA_SCALING_INC_MSB, 0x04, | |
| R_B4_A_VERT_SCALING_MODE_CNTL, 0x01, | |
| R_B8_A_VERT_CHROMA_PHASE_OFF_00, 0x00, | |
| R_B9_A_VERT_CHROMA_PHASE_OFF_01, 0x00, | |
| R_BA_A_VERT_CHROMA_PHASE_OFF_10, 0x00, | |
| R_BB_A_VERT_CHROMA_PHASE_OFF_11, 0x00, | |
| R_BC_A_VERT_LUMA_PHASE_OFF_00, 0x00, | |
| R_BD_A_VERT_LUMA_PHASE_OFF_01, 0x00, | |
| R_BE_A_VERT_LUMA_PHASE_OFF_10, 0x00, | |
| R_BF_A_VERT_LUMA_PHASE_OFF_11, 0x00, | |
| /* Task B */ | |
| R_D0_B_HORIZ_PRESCALING, 0x01, | |
| R_D1_B_ACCUMULATION_LENGTH, 0x00, | |
| R_D2_B_PRESCALER_DC_GAIN_AND_FIR_PREFILTER, 0x00, | |
| /* Configure controls at nominal value*/ | |
| R_D4_B_LUMA_BRIGHTNESS_CNTL, 0x80, | |
| R_D5_B_LUMA_CONTRAST_CNTL, 0x40, | |
| R_D6_B_CHROMA_SATURATION_CNTL, 0x40, | |
| /* hor lum scaling 0x0400 = 1 */ | |
| R_D8_B_HORIZ_LUMA_SCALING_INC, 0x00, | |
| R_D9_B_HORIZ_LUMA_SCALING_INC_MSB, 0x04, | |
| R_DA_B_HORIZ_LUMA_PHASE_OFF, 0x00, | |
| /* must be hor lum scaling / 2 */ | |
| R_DC_B_HORIZ_CHROMA_SCALING, 0x00, | |
| R_DD_B_HORIZ_CHROMA_SCALING_MSB, 0x02, | |
| /* must be offset luma / 2 */ | |
| R_DE_B_HORIZ_PHASE_OFFSET_CRHOMA, 0x00, | |
| R_E0_B_VERT_LUMA_SCALING_INC, 0x00, | |
| R_E1_B_VERT_LUMA_SCALING_INC_MSB, 0x04, | |
| R_E2_B_VERT_CHROMA_SCALING_INC, 0x00, | |
| R_E3_B_VERT_CHROMA_SCALING_INC_MSB, 0x04, | |
| R_E4_B_VERT_SCALING_MODE_CNTL, 0x01, | |
| R_E8_B_VERT_CHROMA_PHASE_OFF_00, 0x00, | |
| R_E9_B_VERT_CHROMA_PHASE_OFF_01, 0x00, | |
| R_EA_B_VERT_CHROMA_PHASE_OFF_10, 0x00, | |
| R_EB_B_VERT_CHROMA_PHASE_OFF_11, 0x00, | |
| R_EC_B_VERT_LUMA_PHASE_OFF_00, 0x00, | |
| R_ED_B_VERT_LUMA_PHASE_OFF_01, 0x00, | |
| R_EE_B_VERT_LUMA_PHASE_OFF_10, 0x00, | |
| R_EF_B_VERT_LUMA_PHASE_OFF_11, 0x00, | |
| R_F2_NOMINAL_PLL2_DTO, 0x50, /* crystal clock = 24.576 MHz, target = 27MHz */ | |
| R_F3_PLL_INCREMENT, 0x46, | |
| R_F4_PLL2_STATUS, 0x00, | |
| R_F7_PULSE_A_POS_MSB, 0x4b, /* not the recommended settings! */ | |
| R_F8_PULSE_B_POS, 0x00, | |
| R_F9_PULSE_B_POS_MSB, 0x4b, | |
| R_FA_PULSE_C_POS, 0x00, | |
| R_FB_PULSE_C_POS_MSB, 0x4b, | |
| /* PLL2 lock detection settings: 71 lines 50% phase error */ | |
| R_FF_S_PLL_MAX_PHASE_ERR_THRESH_NUM_LINES, 0x88, | |
| /* Turn off VBI */ | |
| R_40_SLICER_CNTL_1, 0x20, /* No framing code errors allowed. */ | |
| R_41_LCR_BASE, 0xff, | |
| R_41_LCR_BASE+1, 0xff, | |
| R_41_LCR_BASE+2, 0xff, | |
| R_41_LCR_BASE+3, 0xff, | |
| R_41_LCR_BASE+4, 0xff, | |
| R_41_LCR_BASE+5, 0xff, | |
| R_41_LCR_BASE+6, 0xff, | |
| R_41_LCR_BASE+7, 0xff, | |
| R_41_LCR_BASE+8, 0xff, | |
| R_41_LCR_BASE+9, 0xff, | |
| R_41_LCR_BASE+10, 0xff, | |
| R_41_LCR_BASE+11, 0xff, | |
| R_41_LCR_BASE+12, 0xff, | |
| R_41_LCR_BASE+13, 0xff, | |
| R_41_LCR_BASE+14, 0xff, | |
| R_41_LCR_BASE+15, 0xff, | |
| R_41_LCR_BASE+16, 0xff, | |
| R_41_LCR_BASE+17, 0xff, | |
| R_41_LCR_BASE+18, 0xff, | |
| R_41_LCR_BASE+19, 0xff, | |
| R_41_LCR_BASE+20, 0xff, | |
| R_41_LCR_BASE+21, 0xff, | |
| R_41_LCR_BASE+22, 0xff, | |
| R_58_PROGRAM_FRAMING_CODE, 0x40, | |
| R_59_H_OFF_FOR_SLICER, 0x47, | |
| R_5B_FLD_OFF_AND_MSB_FOR_H_AND_V_OFF, 0x83, | |
| R_5D_DID, 0xbd, | |
| R_5E_SDID, 0x35, | |
| R_02_INPUT_CNTL_1, 0xc4, /* input tuner -> input 4, amplifier active */ | |
| R_80_GLOBAL_CNTL_1, 0x20, /* enable task B */ | |
| R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, | |
| R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0, | |
| 0x00, 0x00 | |
| }; | |
| static int saa711x_odd_parity(u8 c) | |
| { | |
| c ^= (c >> 4); | |
| c ^= (c >> 2); | |
| c ^= (c >> 1); | |
| return c & 1; | |
| } | |
| static int saa711x_decode_vps(u8 *dst, u8 *p) | |
| { | |
| static const u8 biphase_tbl[] = { | |
| 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, | |
| 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, | |
| 0xd2, 0x5a, 0x52, 0xd2, 0x96, 0x1e, 0x16, 0x96, | |
| 0x92, 0x1a, 0x12, 0x92, 0xd2, 0x5a, 0x52, 0xd2, | |
| 0xd0, 0x58, 0x50, 0xd0, 0x94, 0x1c, 0x14, 0x94, | |
| 0x90, 0x18, 0x10, 0x90, 0xd0, 0x58, 0x50, 0xd0, | |
| 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, | |
| 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, | |
| 0xe1, 0x69, 0x61, 0xe1, 0xa5, 0x2d, 0x25, 0xa5, | |
| 0xa1, 0x29, 0x21, 0xa1, 0xe1, 0x69, 0x61, 0xe1, | |
| 0xc3, 0x4b, 0x43, 0xc3, 0x87, 0x0f, 0x07, 0x87, | |
| 0x83, 0x0b, 0x03, 0x83, 0xc3, 0x4b, 0x43, 0xc3, | |
| 0xc1, 0x49, 0x41, 0xc1, 0x85, 0x0d, 0x05, 0x85, | |
| 0x81, 0x09, 0x01, 0x81, 0xc1, 0x49, 0x41, 0xc1, | |
| 0xe1, 0x69, 0x61, 0xe1, 0xa5, 0x2d, 0x25, 0xa5, | |
| 0xa1, 0x29, 0x21, 0xa1, 0xe1, 0x69, 0x61, 0xe1, | |
| 0xe0, 0x68, 0x60, 0xe0, 0xa4, 0x2c, 0x24, 0xa4, | |
| 0xa0, 0x28, 0x20, 0xa0, 0xe0, 0x68, 0x60, 0xe0, | |
| 0xc2, 0x4a, 0x42, 0xc2, 0x86, 0x0e, 0x06, 0x86, | |
| 0x82, 0x0a, 0x02, 0x82, 0xc2, 0x4a, 0x42, 0xc2, | |
| 0xc0, 0x48, 0x40, 0xc0, 0x84, 0x0c, 0x04, 0x84, | |
| 0x80, 0x08, 0x00, 0x80, 0xc0, 0x48, 0x40, 0xc0, | |
| 0xe0, 0x68, 0x60, 0xe0, 0xa4, 0x2c, 0x24, 0xa4, | |
| 0xa0, 0x28, 0x20, 0xa0, 0xe0, 0x68, 0x60, 0xe0, | |
| 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, | |
| 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, | |
| 0xd2, 0x5a, 0x52, 0xd2, 0x96, 0x1e, 0x16, 0x96, | |
| 0x92, 0x1a, 0x12, 0x92, 0xd2, 0x5a, 0x52, 0xd2, | |
| 0xd0, 0x58, 0x50, 0xd0, 0x94, 0x1c, 0x14, 0x94, | |
| 0x90, 0x18, 0x10, 0x90, 0xd0, 0x58, 0x50, 0xd0, | |
| 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, | |
| 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, | |
| }; | |
| int i; | |
| u8 c, err = 0; | |
| for (i = 0; i < 2 * 13; i += 2) { | |
| err |= biphase_tbl[p[i]] | biphase_tbl[p[i + 1]]; | |
| c = (biphase_tbl[p[i + 1]] & 0xf) | ((biphase_tbl[p[i]] & 0xf) << 4); | |
| dst[i / 2] = c; | |
| } | |
| return err & 0xf0; | |
| } | |
| static int saa711x_decode_wss(u8 *p) | |
| { | |
| static const int wss_bits[8] = { | |
| 0, 0, 0, 1, 0, 1, 1, 1 | |
| }; | |
| unsigned char parity; | |
| int wss = 0; | |
| int i; | |
| for (i = 0; i < 16; i++) { | |
| int b1 = wss_bits[p[i] & 7]; | |
| int b2 = wss_bits[(p[i] >> 3) & 7]; | |
| if (b1 == b2) | |
| return -1; | |
| wss |= b2 << i; | |
| } | |
| parity = wss & 15; | |
| parity ^= parity >> 2; | |
| parity ^= parity >> 1; | |
| if (!(parity & 1)) | |
| return -1; | |
| return wss; | |
| } | |
| static int saa711x_s_clock_freq(struct v4l2_subdev *sd, u32 freq) | |
| { | |
| struct saa711x_state *state = to_state(sd); | |
| u32 acpf; | |
| u32 acni; | |
| u32 hz; | |
| u64 f; | |
| u8 acc = 0; /* reg 0x3a, audio clock control */ | |
| /* Checks for chips that don't have audio clock (saa7111, saa7113) */ | |
| if (!saa711x_has_reg(state->ident, R_30_AUD_MAST_CLK_CYCLES_PER_FIELD)) | |
| return 0; | |
| v4l2_dbg(1, debug, sd, "set audio clock freq: %d\n", freq); | |
| /* sanity check */ | |
| if (freq < 32000 || freq > 48000) | |
| return -EINVAL; | |
| /* hz is the refresh rate times 100 */ | |
| hz = (state->std & V4L2_STD_525_60) ? 5994 : 5000; | |
| /* acpf = (256 * freq) / field_frequency == (256 * 100 * freq) / hz */ | |
| acpf = (25600 * freq) / hz; | |
| /* acni = (256 * freq * 2^23) / crystal_frequency = | |
| (freq * 2^(8+23)) / crystal_frequency = | |
| (freq << 31) / crystal_frequency */ | |
| f = freq; | |
| f = f << 31; | |
| do_div(f, state->crystal_freq); | |
| acni = f; | |
| if (state->ucgc) { | |
| acpf = acpf * state->cgcdiv / 16; | |
| acni = acni * state->cgcdiv / 16; | |
| acc = 0x80; | |
| if (state->cgcdiv == 3) | |
| acc |= 0x40; | |
| } | |
| if (state->apll) | |
| acc |= 0x08; | |
| if (state->double_asclk) { | |
| acpf <<= 1; | |
| acni <<= 1; | |
| } | |
| saa711x_write(sd, R_38_CLK_RATIO_AMXCLK_TO_ASCLK, 0x03); | |
| saa711x_write(sd, R_39_CLK_RATIO_ASCLK_TO_ALRCLK, 0x10 << state->double_asclk); | |
| saa711x_write(sd, R_3A_AUD_CLK_GEN_BASIC_SETUP, acc); | |
| saa711x_write(sd, R_30_AUD_MAST_CLK_CYCLES_PER_FIELD, acpf & 0xff); | |
| saa711x_write(sd, R_30_AUD_MAST_CLK_CYCLES_PER_FIELD+1, | |
| (acpf >> 8) & 0xff); | |
| saa711x_write(sd, R_30_AUD_MAST_CLK_CYCLES_PER_FIELD+2, | |
| (acpf >> 16) & 0x03); | |
| saa711x_write(sd, R_34_AUD_MAST_CLK_NOMINAL_INC, acni & 0xff); | |
| saa711x_write(sd, R_34_AUD_MAST_CLK_NOMINAL_INC+1, (acni >> 8) & 0xff); | |
| saa711x_write(sd, R_34_AUD_MAST_CLK_NOMINAL_INC+2, (acni >> 16) & 0x3f); | |
| state->audclk_freq = freq; | |
| return 0; | |
| } | |
| static int saa711x_g_volatile_ctrl(struct v4l2_ctrl *ctrl) | |
| { | |
| struct v4l2_subdev *sd = to_sd(ctrl); | |
| struct saa711x_state *state = to_state(sd); | |
| switch (ctrl->id) { | |
| case V4L2_CID_CHROMA_AGC: | |
| /* chroma gain cluster */ | |
| if (state->agc->val) | |
| state->gain->val = | |
| saa711x_read(sd, R_0F_CHROMA_GAIN_CNTL) & 0x7f; | |
| break; | |
| } | |
| return 0; | |
| } | |
| static int saa711x_s_ctrl(struct v4l2_ctrl *ctrl) | |
| { | |
| struct v4l2_subdev *sd = to_sd(ctrl); | |
| struct saa711x_state *state = to_state(sd); | |
| switch (ctrl->id) { | |
| case V4L2_CID_BRIGHTNESS: | |
| saa711x_write(sd, R_0A_LUMA_BRIGHT_CNTL, ctrl->val); | |
| break; | |
| case V4L2_CID_CONTRAST: | |
| saa711x_write(sd, R_0B_LUMA_CONTRAST_CNTL, ctrl->val); | |
| break; | |
| case V4L2_CID_SATURATION: | |
| saa711x_write(sd, R_0C_CHROMA_SAT_CNTL, ctrl->val); | |
| break; | |
| case V4L2_CID_HUE: | |
| saa711x_write(sd, R_0D_CHROMA_HUE_CNTL, ctrl->val); | |
| break; | |
| case V4L2_CID_CHROMA_AGC: | |
| /* chroma gain cluster */ | |
| if (state->agc->val) | |
| saa711x_write(sd, R_0F_CHROMA_GAIN_CNTL, state->gain->val); | |
| else | |
| saa711x_write(sd, R_0F_CHROMA_GAIN_CNTL, state->gain->val | 0x80); | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static int saa711x_set_size(struct v4l2_subdev *sd, int width, int height) | |
| { | |
| struct saa711x_state *state = to_state(sd); | |
| int HPSC, HFSC; | |
| int VSCY; | |
| int res; | |
| int is_50hz = state->std & V4L2_STD_625_50; | |
| int Vsrc = is_50hz ? 576 : 480; | |
| v4l2_dbg(1, debug, sd, "decoder set size to %ix%i\n", width, height); | |
| /* FIXME need better bounds checking here */ | |
| if ((width < 1) || (width > 1440)) | |
| return -EINVAL; | |
| if ((height < 1) || (height > Vsrc)) | |
| return -EINVAL; | |
| if (!saa711x_has_reg(state->ident, R_D0_B_HORIZ_PRESCALING)) { | |
| /* Decoder only supports 720 columns and 480 or 576 lines */ | |
| if (width != 720) | |
| return -EINVAL; | |
| if (height != Vsrc) | |
| return -EINVAL; | |
| } | |
| state->width = width; | |
| state->height = height; | |
| if (!saa711x_has_reg(state->ident, R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH)) | |
| return 0; | |
| /* probably have a valid size, let's set it */ | |
| /* Set output width/height */ | |
| /* width */ | |
| saa711x_write(sd, R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH, | |
| (u8) (width & 0xff)); | |
| saa711x_write(sd, R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, | |
| (u8) ((width >> 8) & 0xff)); | |
| /* Vertical Scaling uses height/2 */ | |
| res = height / 2; | |
| /* On 60Hz, it is using a higher Vertical Output Size */ | |
| if (!is_50hz) | |
| res += (VRES_60HZ - 480) >> 1; | |
| /* height */ | |
| saa711x_write(sd, R_CE_B_VERT_OUTPUT_WINDOW_LENGTH, | |
| (u8) (res & 0xff)); | |
| saa711x_write(sd, R_CF_B_VERT_OUTPUT_WINDOW_LENGTH_MSB, | |
| (u8) ((res >> 8) & 0xff)); | |
| /* Scaling settings */ | |
| /* Hprescaler is floor(inres/outres) */ | |
| HPSC = (int)(720 / width); | |
| /* 0 is not allowed (div. by zero) */ | |
| HPSC = HPSC ? HPSC : 1; | |
| HFSC = (int)((1024 * 720) / (HPSC * width)); | |
| /* FIXME hardcodes to "Task B" | |
| * write H prescaler integer */ | |
| saa711x_write(sd, R_D0_B_HORIZ_PRESCALING, | |
| (u8) (HPSC & 0x3f)); | |
| v4l2_dbg(1, debug, sd, "Hpsc: 0x%05x, Hfsc: 0x%05x\n", HPSC, HFSC); | |
| /* write H fine-scaling (luminance) */ | |
| saa711x_write(sd, R_D8_B_HORIZ_LUMA_SCALING_INC, | |
| (u8) (HFSC & 0xff)); | |
| saa711x_write(sd, R_D9_B_HORIZ_LUMA_SCALING_INC_MSB, | |
| (u8) ((HFSC >> 8) & 0xff)); | |
| /* write H fine-scaling (chrominance) | |
| * must be lum/2, so i'll just bitshift :) */ | |
| saa711x_write(sd, R_DC_B_HORIZ_CHROMA_SCALING, | |
| (u8) ((HFSC >> 1) & 0xff)); | |
| saa711x_write(sd, R_DD_B_HORIZ_CHROMA_SCALING_MSB, | |
| (u8) ((HFSC >> 9) & 0xff)); | |
| VSCY = (int)((1024 * Vsrc) / height); | |
| v4l2_dbg(1, debug, sd, "Vsrc: %d, Vscy: 0x%05x\n", Vsrc, VSCY); | |
| /* Correct Contrast and Luminance */ | |
| saa711x_write(sd, R_D5_B_LUMA_CONTRAST_CNTL, | |
| (u8) (64 * 1024 / VSCY)); | |
| saa711x_write(sd, R_D6_B_CHROMA_SATURATION_CNTL, | |
| (u8) (64 * 1024 / VSCY)); | |
| /* write V fine-scaling (luminance) */ | |
| saa711x_write(sd, R_E0_B_VERT_LUMA_SCALING_INC, | |
| (u8) (VSCY & 0xff)); | |
| saa711x_write(sd, R_E1_B_VERT_LUMA_SCALING_INC_MSB, | |
| (u8) ((VSCY >> 8) & 0xff)); | |
| /* write V fine-scaling (chrominance) */ | |
| saa711x_write(sd, R_E2_B_VERT_CHROMA_SCALING_INC, | |
| (u8) (VSCY & 0xff)); | |
| saa711x_write(sd, R_E3_B_VERT_CHROMA_SCALING_INC_MSB, | |
| (u8) ((VSCY >> 8) & 0xff)); | |
| saa711x_writeregs(sd, saa7115_cfg_reset_scaler); | |
| /* Activates task "B" */ | |
| saa711x_write(sd, R_80_GLOBAL_CNTL_1, | |
| saa711x_read(sd, R_80_GLOBAL_CNTL_1) | 0x20); | |
| return 0; | |
| } | |
| static void saa711x_set_v4lstd(struct v4l2_subdev *sd, v4l2_std_id std) | |
| { | |
| struct saa711x_state *state = to_state(sd); | |
| /* Prevent unnecessary standard changes. During a standard | |
| change the I-Port is temporarily disabled. Any devices | |
| reading from that port can get confused. | |
| Note that s_std is also used to switch from | |
| radio to TV mode, so if a s_std is broadcast to | |
| all I2C devices then you do not want to have an unwanted | |
| side-effect here. */ | |
| if (std == state->std) | |
| return; | |
| state->std = std; | |
| // This works for NTSC-M, SECAM-L and the 50Hz PAL variants. | |
| if (std & V4L2_STD_525_60) { | |
| v4l2_dbg(1, debug, sd, "decoder set standard 60 Hz\n"); | |
| if (state->ident == GM7113C) { | |
| u8 reg = saa711x_read(sd, R_08_SYNC_CNTL); | |
| reg &= ~(SAA7113_R_08_FSEL | SAA7113_R_08_AUFD); | |
| reg |= SAA7113_R_08_FSEL; | |
| saa711x_write(sd, R_08_SYNC_CNTL, reg); | |
| } else { | |
| saa711x_writeregs(sd, saa7115_cfg_60hz_video); | |
| } | |
| saa711x_set_size(sd, 720, 480); | |
| } else { | |
| v4l2_dbg(1, debug, sd, "decoder set standard 50 Hz\n"); | |
| if (state->ident == GM7113C) { | |
| u8 reg = saa711x_read(sd, R_08_SYNC_CNTL); | |
| reg &= ~(SAA7113_R_08_FSEL | SAA7113_R_08_AUFD); | |
| saa711x_write(sd, R_08_SYNC_CNTL, reg); | |
| } else { | |
| saa711x_writeregs(sd, saa7115_cfg_50hz_video); | |
| } | |
| saa711x_set_size(sd, 720, 576); | |
| } | |
| /* Register 0E - Bits D6-D4 on NO-AUTO mode | |
| (SAA7111 and SAA7113 doesn't have auto mode) | |
| 50 Hz / 625 lines 60 Hz / 525 lines | |
| 000 PAL BGDHI (4.43Mhz) NTSC M (3.58MHz) | |
| 001 NTSC 4.43 (50 Hz) PAL 4.43 (60 Hz) | |
| 010 Combination-PAL N (3.58MHz) NTSC 4.43 (60 Hz) | |
| 011 NTSC N (3.58MHz) PAL M (3.58MHz) | |
| 100 reserved NTSC-Japan (3.58MHz) | |
| */ | |
| if (state->ident <= SAA7113 || | |
| state->ident == GM7113C) { | |
| u8 reg = saa711x_read(sd, R_0E_CHROMA_CNTL_1) & 0x8f; | |
| if (std == V4L2_STD_PAL_M) { | |
| reg |= 0x30; | |
| } else if (std == V4L2_STD_PAL_Nc) { | |
| reg |= 0x20; | |
| } else if (std == V4L2_STD_PAL_60) { | |
| reg |= 0x10; | |
| } else if (std == V4L2_STD_NTSC_M_JP) { | |
| reg |= 0x40; | |
| } else if (std & V4L2_STD_SECAM) { | |
| reg |= 0x50; | |
| } | |
| saa711x_write(sd, R_0E_CHROMA_CNTL_1, reg); | |
| } else { | |
| /* restart task B if needed */ | |
| int taskb = saa711x_read(sd, R_80_GLOBAL_CNTL_1) & 0x10; | |
| if (taskb && state->ident == SAA7114) | |
| saa711x_writeregs(sd, saa7115_cfg_vbi_on); | |
| /* switch audio mode too! */ | |
| saa711x_s_clock_freq(sd, state->audclk_freq); | |
| } | |
| } | |
| /* setup the sliced VBI lcr registers according to the sliced VBI format */ | |
| static void saa711x_set_lcr(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt) | |
| { | |
| struct saa711x_state *state = to_state(sd); | |
| int is_50hz = (state->std & V4L2_STD_625_50); | |
| u8 lcr[24]; | |
| int i, x; | |
| #if 1 | |
| /* saa7113/7114/7118 VBI support are experimental */ | |
| if (!saa711x_has_reg(state->ident, R_41_LCR_BASE)) | |
| return; | |
| #else | |
| /* SAA7113 and SAA7118 also should support VBI - Need testing */ | |
| if (state->ident != SAA7115) | |
| return; | |
| #endif | |
| for (i = 0; i <= 23; i++) | |
| lcr[i] = 0xff; | |
| if (fmt == NULL) { | |
| /* raw VBI */ | |
| if (is_50hz) | |
| for (i = 6; i <= 23; i++) | |
| lcr[i] = 0xdd; | |
| else | |
| for (i = 10; i <= 21; i++) | |
| lcr[i] = 0xdd; | |
| } else { | |
| /* sliced VBI */ | |
| /* first clear lines that cannot be captured */ | |
| if (is_50hz) { | |
| for (i = 0; i <= 5; i++) | |
| fmt->service_lines[0][i] = | |
| fmt->service_lines[1][i] = 0; | |
| } | |
| else { | |
| for (i = 0; i <= 9; i++) | |
| fmt->service_lines[0][i] = | |
| fmt->service_lines[1][i] = 0; | |
| for (i = 22; i <= 23; i++) | |
| fmt->service_lines[0][i] = | |
| fmt->service_lines[1][i] = 0; | |
| } | |
| /* Now set the lcr values according to the specified service */ | |
| for (i = 6; i <= 23; i++) { | |
| lcr[i] = 0; | |
| for (x = 0; x <= 1; x++) { | |
| switch (fmt->service_lines[1-x][i]) { | |
| case 0: | |
| lcr[i] |= 0xf << (4 * x); | |
| break; | |
| case V4L2_SLICED_TELETEXT_B: | |
| lcr[i] |= 1 << (4 * x); | |
| break; | |
| case V4L2_SLICED_CAPTION_525: | |
| lcr[i] |= 4 << (4 * x); | |
| break; | |
| case V4L2_SLICED_WSS_625: | |
| lcr[i] |= 5 << (4 * x); | |
| break; | |
| case V4L2_SLICED_VPS: | |
| lcr[i] |= 7 << (4 * x); | |
| break; | |
| } | |
| } | |
| } | |
| } | |
| /* write the lcr registers */ | |
| for (i = 2; i <= 23; i++) { | |
| saa711x_write(sd, i - 2 + R_41_LCR_BASE, lcr[i]); | |
| } | |
| /* enable/disable raw VBI capturing */ | |
| saa711x_writeregs(sd, fmt == NULL ? | |
| saa7115_cfg_vbi_on : | |
| saa7115_cfg_vbi_off); | |
| } | |
| static int saa711x_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *sliced) | |
| { | |
| static u16 lcr2vbi[] = { | |
| 0, V4L2_SLICED_TELETEXT_B, 0, /* 1 */ | |
| 0, V4L2_SLICED_CAPTION_525, /* 4 */ | |
| V4L2_SLICED_WSS_625, 0, /* 5 */ | |
| V4L2_SLICED_VPS, 0, 0, 0, 0, /* 7 */ | |
| 0, 0, 0, 0 | |
| }; | |
| int i; | |
| memset(sliced->service_lines, 0, sizeof(sliced->service_lines)); | |
| sliced->service_set = 0; | |
| /* done if using raw VBI */ | |
| if (saa711x_read(sd, R_80_GLOBAL_CNTL_1) & 0x10) | |
| return 0; | |
| for (i = 2; i <= 23; i++) { | |
| u8 v = saa711x_read(sd, i - 2 + R_41_LCR_BASE); | |
| sliced->service_lines[0][i] = lcr2vbi[v >> 4]; | |
| sliced->service_lines[1][i] = lcr2vbi[v & 0xf]; | |
| sliced->service_set |= | |
| sliced->service_lines[0][i] | sliced->service_lines[1][i]; | |
| } | |
| return 0; | |
| } | |
| static int saa711x_s_raw_fmt(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt) | |
| { | |
| saa711x_set_lcr(sd, NULL); | |
| return 0; | |
| } | |
| static int saa711x_s_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt) | |
| { | |
| saa711x_set_lcr(sd, fmt); | |
| return 0; | |
| } | |
| static int saa711x_set_fmt(struct v4l2_subdev *sd, | |
| struct v4l2_subdev_pad_config *cfg, | |
| struct v4l2_subdev_format *format) | |
| { | |
| struct v4l2_mbus_framefmt *fmt = &format->format; | |
| if (format->pad || fmt->code != MEDIA_BUS_FMT_FIXED) | |
| return -EINVAL; | |
| fmt->field = V4L2_FIELD_INTERLACED; | |
| fmt->colorspace = V4L2_COLORSPACE_SMPTE170M; | |
| if (format->which == V4L2_SUBDEV_FORMAT_TRY) | |
| return 0; | |
| return saa711x_set_size(sd, fmt->width, fmt->height); | |
| } | |
| /* Decode the sliced VBI data stream as created by the saa7115. | |
| The format is described in the saa7115 datasheet in Tables 25 and 26 | |
| and in Figure 33. | |
| The current implementation uses SAV/EAV codes and not the ancillary data | |
| headers. The vbi->p pointer points to the R_5E_SDID byte right after the SAV | |
| code. */ | |
| static int saa711x_decode_vbi_line(struct v4l2_subdev *sd, struct v4l2_decode_vbi_line *vbi) | |
| { | |
| struct saa711x_state *state = to_state(sd); | |
| static const char vbi_no_data_pattern[] = { | |
| 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0 | |
| }; | |
| u8 *p = vbi->p; | |
| u32 wss; | |
| int id1, id2; /* the ID1 and ID2 bytes from the internal header */ | |
| vbi->type = 0; /* mark result as a failure */ | |
| id1 = p[2]; | |
| id2 = p[3]; | |
| /* Note: the field bit is inverted for 60 Hz video */ | |
| if (state->std & V4L2_STD_525_60) | |
| id1 ^= 0x40; | |
| /* Skip internal header, p now points to the start of the payload */ | |
| p += 4; | |
| vbi->p = p; | |
| /* calculate field and line number of the VBI packet (1-23) */ | |
| vbi->is_second_field = ((id1 & 0x40) != 0); | |
| vbi->line = (id1 & 0x3f) << 3; | |
| vbi->line |= (id2 & 0x70) >> 4; | |
| /* Obtain data type */ | |
| id2 &= 0xf; | |
| /* If the VBI slicer does not detect any signal it will fill up | |
| the payload buffer with 0xa0 bytes. */ | |
| if (!memcmp(p, vbi_no_data_pattern, sizeof(vbi_no_data_pattern))) | |
| return 0; | |
| /* decode payloads */ | |
| switch (id2) { | |
| case 1: | |
| vbi->type = V4L2_SLICED_TELETEXT_B; | |
| break; | |
| case 4: | |
| if (!saa711x_odd_parity(p[0]) || !saa711x_odd_parity(p[1])) | |
| return 0; | |
| vbi->type = V4L2_SLICED_CAPTION_525; | |
| break; | |
| case 5: | |
| wss = saa711x_decode_wss(p); | |
| if (wss == -1) | |
| return 0; | |
| p[0] = wss & 0xff; | |
| p[1] = wss >> 8; | |
| vbi->type = V4L2_SLICED_WSS_625; | |
| break; | |
| case 7: | |
| if (saa711x_decode_vps(p, p) != 0) | |
| return 0; | |
| vbi->type = V4L2_SLICED_VPS; | |
| break; | |
| default: | |
| break; | |
| } | |
| return 0; | |
| } | |
| /* ============ SAA7115 AUDIO settings (end) ============= */ | |
| static int saa711x_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) | |
| { | |
| struct saa711x_state *state = to_state(sd); | |
| int status; | |
| if (state->radio) | |
| return 0; | |
| status = saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC); | |
| v4l2_dbg(1, debug, sd, "status: 0x%02x\n", status); | |
| vt->signal = ((status & (1 << 6)) == 0) ? 0xffff : 0x0; | |
| return 0; | |
| } | |
| static int saa711x_s_std(struct v4l2_subdev *sd, v4l2_std_id std) | |
| { | |
| struct saa711x_state *state = to_state(sd); | |
| state->radio = 0; | |
| saa711x_set_v4lstd(sd, std); | |
| return 0; | |
| } | |
| static int saa711x_s_radio(struct v4l2_subdev *sd) | |
| { | |
| struct saa711x_state *state = to_state(sd); | |
| state->radio = 1; | |
| return 0; | |
| } | |
| static int saa711x_s_routing(struct v4l2_subdev *sd, | |
| u32 input, u32 output, u32 config) | |
| { | |
| struct saa711x_state *state = to_state(sd); | |
| u8 mask = (state->ident <= SAA7111A) ? 0xf8 : 0xf0; | |
| v4l2_dbg(1, debug, sd, "decoder set input %d output %d\n", | |
| input, output); | |
| /* saa7111/3 does not have these inputs */ | |
| if ((state->ident <= SAA7113 || | |
| state->ident == GM7113C) && | |
| (input == SAA7115_COMPOSITE4 || | |
| input == SAA7115_COMPOSITE5)) { | |
| return -EINVAL; | |
| } | |
| if (input > SAA7115_SVIDEO3) | |
| return -EINVAL; | |
| if (state->input == input && state->output == output) | |
| return 0; | |
| v4l2_dbg(1, debug, sd, "now setting %s input %s output\n", | |
| (input >= SAA7115_SVIDEO0) ? "S-Video" : "Composite", | |
| (output == SAA7115_IPORT_ON) ? "iport on" : "iport off"); | |
| state->input = input; | |
| /* saa7111 has slightly different input numbering */ | |
| if (state->ident <= SAA7111A) { | |
| if (input >= SAA7115_COMPOSITE4) | |
| input -= 2; | |
| /* saa7111 specific */ | |
| saa711x_write(sd, R_10_CHROMA_CNTL_2, | |
| (saa711x_read(sd, R_10_CHROMA_CNTL_2) & 0x3f) | | |
| ((output & 0xc0) ^ 0x40)); | |
| saa711x_write(sd, R_13_RT_X_PORT_OUT_CNTL, | |
| (saa711x_read(sd, R_13_RT_X_PORT_OUT_CNTL) & 0xf0) | | |
| ((output & 2) ? 0x0a : 0)); | |
| } | |
| /* select mode */ | |
| saa711x_write(sd, R_02_INPUT_CNTL_1, | |
| (saa711x_read(sd, R_02_INPUT_CNTL_1) & mask) | | |
| input); | |
| /* bypass chrominance trap for S-Video modes */ | |
| saa711x_write(sd, R_09_LUMA_CNTL, | |
| (saa711x_read(sd, R_09_LUMA_CNTL) & 0x7f) | | |
| (state->input >= SAA7115_SVIDEO0 ? 0x80 : 0x0)); | |
| state->output = output; | |
| if (state->ident == SAA7114 || | |
| state->ident == SAA7115) { | |
| saa711x_write(sd, R_83_X_PORT_I_O_ENA_AND_OUT_CLK, | |
| (saa711x_read(sd, R_83_X_PORT_I_O_ENA_AND_OUT_CLK) & 0xfe) | | |
| (state->output & 0x01)); | |
| } | |
| if (state->ident > SAA7111A) { | |
| if (config & SAA7115_IDQ_IS_DEFAULT) | |
| saa711x_write(sd, R_85_I_PORT_SIGNAL_POLAR, 0x20); | |
| else | |
| saa711x_write(sd, R_85_I_PORT_SIGNAL_POLAR, 0x21); | |
| } | |
| return 0; | |
| } | |
| static int saa711x_s_gpio(struct v4l2_subdev *sd, u32 val) | |
| { | |
| struct saa711x_state *state = to_state(sd); | |
| if (state->ident > SAA7111A) | |
| return -EINVAL; | |
| saa711x_write(sd, 0x11, (saa711x_read(sd, 0x11) & 0x7f) | | |
| (val ? 0x80 : 0)); | |
| return 0; | |
| } | |
| static int saa711x_s_stream(struct v4l2_subdev *sd, int enable) | |
| { | |
| struct saa711x_state *state = to_state(sd); | |
| v4l2_dbg(1, debug, sd, "%s output\n", | |
| enable ? "enable" : "disable"); | |
| if (state->enable == enable) | |
| return 0; | |
| state->enable = enable; | |
| if (!saa711x_has_reg(state->ident, R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED)) | |
| return 0; | |
| saa711x_write(sd, R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, state->enable); | |
| return 0; | |
| } | |
| static int saa711x_s_crystal_freq(struct v4l2_subdev *sd, u32 freq, u32 flags) | |
| { | |
| struct saa711x_state *state = to_state(sd); | |
| if (freq != SAA7115_FREQ_32_11_MHZ && freq != SAA7115_FREQ_24_576_MHZ) | |
| return -EINVAL; | |
| state->crystal_freq = freq; | |
| state->double_asclk = flags & SAA7115_FREQ_FL_DOUBLE_ASCLK; | |
| state->cgcdiv = (flags & SAA7115_FREQ_FL_CGCDIV) ? 3 : 4; | |
| state->ucgc = flags & SAA7115_FREQ_FL_UCGC; | |
| state->apll = flags & SAA7115_FREQ_FL_APLL; | |
| saa711x_s_clock_freq(sd, state->audclk_freq); | |
| return 0; | |
| } | |
| static int saa711x_reset(struct v4l2_subdev *sd, u32 val) | |
| { | |
| v4l2_dbg(1, debug, sd, "decoder RESET\n"); | |
| saa711x_writeregs(sd, saa7115_cfg_reset_scaler); | |
| return 0; | |
| } | |
| static int saa711x_g_vbi_data(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_data *data) | |
| { | |
| /* Note: the internal field ID is inverted for NTSC, | |
| so data->field 0 maps to the saa7115 even field, | |
| whereas for PAL it maps to the saa7115 odd field. */ | |
| switch (data->id) { | |
| case V4L2_SLICED_WSS_625: | |
| if (saa711x_read(sd, 0x6b) & 0xc0) | |
| return -EIO; | |
| data->data[0] = saa711x_read(sd, 0x6c); | |
| data->data[1] = saa711x_read(sd, 0x6d); | |
| return 0; | |
| case V4L2_SLICED_CAPTION_525: | |
| if (data->field == 0) { | |
| /* CC */ | |
| if (saa711x_read(sd, 0x66) & 0x30) | |
| return -EIO; | |
| data->data[0] = saa711x_read(sd, 0x69); | |
| data->data[1] = saa711x_read(sd, 0x6a); | |
| return 0; | |
| } | |
| /* XDS */ | |
| if (saa711x_read(sd, 0x66) & 0xc0) | |
| return -EIO; | |
| data->data[0] = saa711x_read(sd, 0x67); | |
| data->data[1] = saa711x_read(sd, 0x68); | |
| return 0; | |
| default: | |
| return -EINVAL; | |
| } | |
| } | |
| static int saa711x_querystd(struct v4l2_subdev *sd, v4l2_std_id *std) | |
| { | |
| struct saa711x_state *state = to_state(sd); | |
| int reg1f, reg1e; | |
| /* | |
| * The V4L2 core already initializes std with all supported | |
| * Standards. All driver needs to do is to mask it, to remove | |
| * standards that don't apply from the mask | |
| */ | |
| reg1f = saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC); | |
| if (state->ident == SAA7115) { | |
| reg1e = saa711x_read(sd, R_1E_STATUS_BYTE_1_VD_DEC); | |
| v4l2_dbg(1, debug, sd, "Status byte 1 (0x1e)=0x%02x\n", reg1e); | |
| switch (reg1e & 0x03) { | |
| case 1: | |
| *std &= V4L2_STD_NTSC; | |
| break; | |
| case 2: | |
| /* | |
| * V4L2_STD_PAL just cover the european PAL standards. | |
| * This is wrong, as the device could also be using an | |
| * other PAL standard. | |
| */ | |
| *std &= V4L2_STD_PAL | V4L2_STD_PAL_N | V4L2_STD_PAL_Nc | | |
| V4L2_STD_PAL_M | V4L2_STD_PAL_60; | |
| break; | |
| case 3: | |
| *std &= V4L2_STD_SECAM; | |
| break; | |
| default: | |
| *std = V4L2_STD_UNKNOWN; | |
| /* Can't detect anything */ | |
| break; | |
| } | |
| } | |
| v4l2_dbg(1, debug, sd, "Status byte 2 (0x1f)=0x%02x\n", reg1f); | |
| /* horizontal/vertical not locked */ | |
| if (reg1f & 0x40) { | |
| *std = V4L2_STD_UNKNOWN; | |
| goto ret; | |
| } | |
| if (reg1f & 0x20) | |
| *std &= V4L2_STD_525_60; | |
| else | |
| *std &= V4L2_STD_625_50; | |
| ret: | |
| v4l2_dbg(1, debug, sd, "detected std mask = %08Lx\n", *std); | |
| return 0; | |
| } | |
| static int saa711x_g_input_status(struct v4l2_subdev *sd, u32 *status) | |
| { | |
| struct saa711x_state *state = to_state(sd); | |
| int reg1e = 0x80; | |
| int reg1f; | |
| *status = V4L2_IN_ST_NO_SIGNAL; | |
| if (state->ident == SAA7115) | |
| reg1e = saa711x_read(sd, R_1E_STATUS_BYTE_1_VD_DEC); | |
| reg1f = saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC); | |
| if ((reg1f & 0xc1) == 0x81 && (reg1e & 0xc0) == 0x80) | |
| *status = 0; | |
| return 0; | |
| } | |
| #ifdef CONFIG_VIDEO_ADV_DEBUG | |
| static int saa711x_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) | |
| { | |
| reg->val = saa711x_read(sd, reg->reg & 0xff); | |
| reg->size = 1; | |
| return 0; | |
| } | |
| static int saa711x_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg) | |
| { | |
| saa711x_write(sd, reg->reg & 0xff, reg->val & 0xff); | |
| return 0; | |
| } | |
| #endif | |
| static int saa711x_log_status(struct v4l2_subdev *sd) | |
| { | |
| struct saa711x_state *state = to_state(sd); | |
| int reg1e, reg1f; | |
| int signalOk; | |
| int vcr; | |
| v4l2_info(sd, "Audio frequency: %d Hz\n", state->audclk_freq); | |
| if (state->ident != SAA7115) { | |
| /* status for the saa7114 */ | |
| reg1f = saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC); | |
| signalOk = (reg1f & 0xc1) == 0x81; | |
| v4l2_info(sd, "Video signal: %s\n", signalOk ? "ok" : "bad"); | |
| v4l2_info(sd, "Frequency: %s\n", (reg1f & 0x20) ? "60 Hz" : "50 Hz"); | |
| return 0; | |
| } | |
| /* status for the saa7115 */ | |
| reg1e = saa711x_read(sd, R_1E_STATUS_BYTE_1_VD_DEC); | |
| reg1f = saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC); | |
| signalOk = (reg1f & 0xc1) == 0x81 && (reg1e & 0xc0) == 0x80; | |
| vcr = !(reg1f & 0x10); | |
| if (state->input >= 6) | |
| v4l2_info(sd, "Input: S-Video %d\n", state->input - 6); | |
| else | |
| v4l2_info(sd, "Input: Composite %d\n", state->input); | |
| v4l2_info(sd, "Video signal: %s\n", signalOk ? (vcr ? "VCR" : "broadcast/DVD") : "bad"); | |
| v4l2_info(sd, "Frequency: %s\n", (reg1f & 0x20) ? "60 Hz" : "50 Hz"); | |
| switch (reg1e & 0x03) { | |
| case 1: | |
| v4l2_info(sd, "Detected format: NTSC\n"); | |
| break; | |
| case 2: | |
| v4l2_info(sd, "Detected format: PAL\n"); | |
| break; | |
| case 3: | |
| v4l2_info(sd, "Detected format: SECAM\n"); | |
| break; | |
| default: | |
| v4l2_info(sd, "Detected format: BW/No color\n"); | |
| break; | |
| } | |
| v4l2_info(sd, "Width, Height: %d, %d\n", state->width, state->height); | |
| v4l2_ctrl_handler_log_status(&state->hdl, sd->name); | |
| return 0; | |
| } | |
| /* ----------------------------------------------------------------------- */ | |
| static const struct v4l2_ctrl_ops saa711x_ctrl_ops = { | |
| .s_ctrl = saa711x_s_ctrl, | |
| .g_volatile_ctrl = saa711x_g_volatile_ctrl, | |
| }; | |
| static const struct v4l2_subdev_core_ops saa711x_core_ops = { | |
| .log_status = saa711x_log_status, | |
| .reset = saa711x_reset, | |
| .s_gpio = saa711x_s_gpio, | |
| #ifdef CONFIG_VIDEO_ADV_DEBUG | |
| .g_register = saa711x_g_register, | |
| .s_register = saa711x_s_register, | |
| #endif | |
| }; | |
| static const struct v4l2_subdev_tuner_ops saa711x_tuner_ops = { | |
| .s_radio = saa711x_s_radio, | |
| .g_tuner = saa711x_g_tuner, | |
| }; | |
| static const struct v4l2_subdev_audio_ops saa711x_audio_ops = { | |
| .s_clock_freq = saa711x_s_clock_freq, | |
| }; | |
| static const struct v4l2_subdev_video_ops saa711x_video_ops = { | |
| .s_std = saa711x_s_std, | |
| .s_routing = saa711x_s_routing, | |
| .s_crystal_freq = saa711x_s_crystal_freq, | |
| .s_stream = saa711x_s_stream, | |
| .querystd = saa711x_querystd, | |
| .g_input_status = saa711x_g_input_status, | |
| }; | |
| static const struct v4l2_subdev_vbi_ops saa711x_vbi_ops = { | |
| .g_vbi_data = saa711x_g_vbi_data, | |
| .decode_vbi_line = saa711x_decode_vbi_line, | |
| .g_sliced_fmt = saa711x_g_sliced_fmt, | |
| .s_sliced_fmt = saa711x_s_sliced_fmt, | |
| .s_raw_fmt = saa711x_s_raw_fmt, | |
| }; | |
| static const struct v4l2_subdev_pad_ops saa711x_pad_ops = { | |
| .set_fmt = saa711x_set_fmt, | |
| }; | |
| static const struct v4l2_subdev_ops saa711x_ops = { | |
| .core = &saa711x_core_ops, | |
| .tuner = &saa711x_tuner_ops, | |
| .audio = &saa711x_audio_ops, | |
| .video = &saa711x_video_ops, | |
| .vbi = &saa711x_vbi_ops, | |
| .pad = &saa711x_pad_ops, | |
| }; | |
| #define CHIP_VER_SIZE 16 | |
| /* ----------------------------------------------------------------------- */ | |
| static void saa711x_write_platform_data(struct saa711x_state *state, | |
| struct saa7115_platform_data *data) | |
| { | |
| struct v4l2_subdev *sd = &state->sd; | |
| u8 work; | |
| if (state->ident != GM7113C && | |
| state->ident != SAA7113) | |
| return; | |
| if (data->saa7113_r08_htc) { | |
| work = saa711x_read(sd, R_08_SYNC_CNTL); | |
| work &= ~SAA7113_R_08_HTC_MASK; | |
| work |= ((*data->saa7113_r08_htc) << SAA7113_R_08_HTC_OFFSET); | |
| saa711x_write(sd, R_08_SYNC_CNTL, work); | |
| } | |
| if (data->saa7113_r10_vrln) { | |
| work = saa711x_read(sd, R_10_CHROMA_CNTL_2); | |
| work &= ~SAA7113_R_10_VRLN_MASK; | |
| if (*data->saa7113_r10_vrln) | |
| work |= (1 << SAA7113_R_10_VRLN_OFFSET); | |
| saa711x_write(sd, R_10_CHROMA_CNTL_2, work); | |
| } | |
| if (data->saa7113_r10_ofts) { | |
| work = saa711x_read(sd, R_10_CHROMA_CNTL_2); | |
| work &= ~SAA7113_R_10_OFTS_MASK; | |
| work |= (*data->saa7113_r10_ofts << SAA7113_R_10_OFTS_OFFSET); | |
| saa711x_write(sd, R_10_CHROMA_CNTL_2, work); | |
| } | |
| if (data->saa7113_r12_rts0) { | |
| work = saa711x_read(sd, R_12_RT_SIGNAL_CNTL); | |
| work &= ~SAA7113_R_12_RTS0_MASK; | |
| work |= (*data->saa7113_r12_rts0 << SAA7113_R_12_RTS0_OFFSET); | |
| /* According to the datasheet, | |
| * SAA7113_RTS_DOT_IN should only be used on RTS1 */ | |
| WARN_ON(*data->saa7113_r12_rts0 == SAA7113_RTS_DOT_IN); | |
| saa711x_write(sd, R_12_RT_SIGNAL_CNTL, work); | |
| } | |
| if (data->saa7113_r12_rts1) { | |
| work = saa711x_read(sd, R_12_RT_SIGNAL_CNTL); | |
| work &= ~SAA7113_R_12_RTS1_MASK; | |
| work |= (*data->saa7113_r12_rts1 << SAA7113_R_12_RTS1_OFFSET); | |
| saa711x_write(sd, R_12_RT_SIGNAL_CNTL, work); | |
| } | |
| if (data->saa7113_r13_adlsb) { | |
| work = saa711x_read(sd, R_13_RT_X_PORT_OUT_CNTL); | |
| work &= ~SAA7113_R_13_ADLSB_MASK; | |
| if (*data->saa7113_r13_adlsb) | |
| work |= (1 << SAA7113_R_13_ADLSB_OFFSET); | |
| saa711x_write(sd, R_13_RT_X_PORT_OUT_CNTL, work); | |
| } | |
| } | |
| /** | |
| * saa711x_detect_chip - Detects the saa711x (or clone) variant | |
| * @client: I2C client structure. | |
| * @id: I2C device ID structure. | |
| * @name: Name of the device to be filled. | |
| * | |
| * Detects the Philips/NXP saa711x chip, or some clone of it. | |
| * if 'id' is NULL or id->driver_data is equal to 1, it auto-probes | |
| * the analog demod. | |
| * If the tuner is not found, it returns -ENODEV. | |
| * If auto-detection is disabled and the tuner doesn't match what it was | |
| * required, it returns -EINVAL and fills 'name'. | |
| * If the chip is found, it returns the chip ID and fills 'name'. | |
| */ | |
| static int saa711x_detect_chip(struct i2c_client *client, | |
| const struct i2c_device_id *id, | |
| char *name) | |
| { | |
| char chip_ver[CHIP_VER_SIZE]; | |
| char chip_id; | |
| int i; | |
| int autodetect; | |
| autodetect = !id || id->driver_data == 1; | |
| /* Read the chip version register */ | |
| for (i = 0; i < CHIP_VER_SIZE; i++) { | |
| i2c_smbus_write_byte_data(client, 0, i); | |
| chip_ver[i] = i2c_smbus_read_byte_data(client, 0); | |
| name[i] = (chip_ver[i] & 0x0f) + '0'; | |
| if (name[i] > '9') | |
| name[i] += 'a' - '9' - 1; | |
| } | |
| name[i] = '\0'; | |
| /* Check if it is a Philips/NXP chip */ | |
| if (!memcmp(name + 1, "f711", 4)) { | |
| chip_id = name[5]; | |
| snprintf(name, CHIP_VER_SIZE, "saa711%c", chip_id); | |
| if (!autodetect && strcmp(name, id->name)) | |
| return -EINVAL; | |
| switch (chip_id) { | |
| case '1': | |
| if (chip_ver[0] & 0xf0) { | |
| snprintf(name, CHIP_VER_SIZE, "saa711%ca", chip_id); | |
| v4l_info(client, "saa7111a variant found\n"); | |
| return SAA7111A; | |
| } | |
| return SAA7111; | |
| case '3': | |
| return SAA7113; | |
| case '4': | |
| return SAA7114; | |
| case '5': | |
| return SAA7115; | |
| case '8': | |
| return SAA7118; | |
| default: | |
| v4l2_info(client, | |
| "WARNING: Philips/NXP chip unknown - Falling back to saa7111\n"); | |
| return SAA7111; | |
| } | |
| } | |
| /* Check if it is a gm7113c */ | |
| if (!memcmp(name, "0000", 4)) { | |
| chip_id = 0; | |
| for (i = 0; i < 4; i++) { | |
| chip_id = chip_id << 1; | |
| chip_id |= (chip_ver[i] & 0x80) ? 1 : 0; | |
| } | |
| /* | |
| * Note: From the datasheet, only versions 1 and 2 | |
| * exists. However, tests on a device labeled as: | |
| * "GM7113C 1145" returned "10" on all 16 chip | |
| * version (reg 0x00) reads. So, we need to also | |
| * accept at least verion 0. For now, let's just | |
| * assume that a device that returns "0000" for | |
| * the lower nibble is a gm7113c. | |
| */ | |
| strlcpy(name, "gm7113c", CHIP_VER_SIZE); | |
| if (!autodetect && strcmp(name, id->name)) | |
| return -EINVAL; | |
| v4l_dbg(1, debug, client, | |
| "It seems to be a %s chip (%*ph) @ 0x%x.\n", | |
| name, 16, chip_ver, client->addr << 1); | |
| return GM7113C; | |
| } | |
| /* Check if it is a CJC7113 */ | |
| if (!memcmp(name, "1111111111111111", CHIP_VER_SIZE)) { | |
| strlcpy(name, "cjc7113", CHIP_VER_SIZE); | |
| if (!autodetect && strcmp(name, id->name)) | |
| return -EINVAL; | |
| v4l_dbg(1, debug, client, | |
| "It seems to be a %s chip (%*ph) @ 0x%x.\n", | |
| name, 16, chip_ver, client->addr << 1); | |
| /* CJC7113 seems to be SAA7113-compatible */ | |
| return SAA7113; | |
| } | |
| /* Chip was not discovered. Return its ID and don't bind */ | |
| v4l_dbg(1, debug, client, "chip %*ph @ 0x%x is unknown.\n", | |
| 16, chip_ver, client->addr << 1); | |
| return -ENODEV; | |
| } | |
| static int saa711x_probe(struct i2c_client *client, | |
| const struct i2c_device_id *id) | |
| { | |
| struct saa711x_state *state; | |
| struct v4l2_subdev *sd; | |
| struct v4l2_ctrl_handler *hdl; | |
| struct saa7115_platform_data *pdata; | |
| int ident; | |
| char name[CHIP_VER_SIZE + 1]; | |
| #if defined(CONFIG_MEDIA_CONTROLLER) | |
| int ret; | |
| #endif | |
| /* Check if the adapter supports the needed features */ | |
| if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) | |
| return -EIO; | |
| ident = saa711x_detect_chip(client, id, name); | |
| if (ident == -EINVAL) { | |
| /* Chip exists, but doesn't match */ | |
| v4l_warn(client, "found %s while %s was expected\n", | |
| name, id->name); | |
| return -ENODEV; | |
| } | |
| if (ident < 0) | |
| return ident; | |
| strlcpy(client->name, name, sizeof(client->name)); | |
| state = devm_kzalloc(&client->dev, sizeof(*state), GFP_KERNEL); | |
| if (state == NULL) | |
| return -ENOMEM; | |
| sd = &state->sd; | |
| v4l2_i2c_subdev_init(sd, client, &saa711x_ops); | |
| #if defined(CONFIG_MEDIA_CONTROLLER) | |
| state->pads[DEMOD_PAD_IF_INPUT].flags = MEDIA_PAD_FL_SINK; | |
| state->pads[DEMOD_PAD_VID_OUT].flags = MEDIA_PAD_FL_SOURCE; | |
| state->pads[DEMOD_PAD_VBI_OUT].flags = MEDIA_PAD_FL_SOURCE; | |
| sd->entity.function = MEDIA_ENT_F_ATV_DECODER; | |
| ret = media_entity_pads_init(&sd->entity, DEMOD_NUM_PADS, state->pads); | |
| if (ret < 0) | |
| return ret; | |
| #endif | |
| v4l_info(client, "%s found @ 0x%x (%s)\n", name, | |
| client->addr << 1, client->adapter->name); | |
| hdl = &state->hdl; | |
| v4l2_ctrl_handler_init(hdl, 6); | |
| /* add in ascending ID order */ | |
| v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops, | |
| V4L2_CID_BRIGHTNESS, 0, 255, 1, 128); | |
| v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops, | |
| V4L2_CID_CONTRAST, 0, 127, 1, 64); | |
| v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops, | |
| V4L2_CID_SATURATION, 0, 127, 1, 64); | |
| v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops, | |
| V4L2_CID_HUE, -128, 127, 1, 0); | |
| state->agc = v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops, | |
| V4L2_CID_CHROMA_AGC, 0, 1, 1, 1); | |
| state->gain = v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops, | |
| V4L2_CID_CHROMA_GAIN, 0, 127, 1, 40); | |
| sd->ctrl_handler = hdl; | |
| if (hdl->error) { | |
| int err = hdl->error; | |
| v4l2_ctrl_handler_free(hdl); | |
| return err; | |
| } | |
| v4l2_ctrl_auto_cluster(2, &state->agc, 0, true); | |
| state->input = -1; | |
| state->output = SAA7115_IPORT_ON; | |
| state->enable = 1; | |
| state->radio = 0; | |
| state->ident = ident; | |
| state->audclk_freq = 48000; | |
| v4l2_dbg(1, debug, sd, "writing init values\n"); | |
| /* init to 60hz/48khz */ | |
| state->crystal_freq = SAA7115_FREQ_24_576_MHZ; | |
| pdata = client->dev.platform_data; | |
| switch (state->ident) { | |
| case SAA7111: | |
| case SAA7111A: | |
| saa711x_writeregs(sd, saa7111_init); | |
| break; | |
| case GM7113C: | |
| saa711x_writeregs(sd, gm7113c_init); | |
| break; | |
| case SAA7113: | |
| if (pdata && pdata->saa7113_force_gm7113c_init) | |
| saa711x_writeregs(sd, gm7113c_init); | |
| else | |
| saa711x_writeregs(sd, saa7113_init); | |
| break; | |
| default: | |
| state->crystal_freq = SAA7115_FREQ_32_11_MHZ; | |
| saa711x_writeregs(sd, saa7115_init_auto_input); | |
| } | |
| if (state->ident > SAA7111A && state->ident != GM7113C) | |
| saa711x_writeregs(sd, saa7115_init_misc); | |
| if (pdata) | |
| saa711x_write_platform_data(state, pdata); | |
| saa711x_set_v4lstd(sd, V4L2_STD_NTSC); | |
| v4l2_ctrl_handler_setup(hdl); | |
| v4l2_dbg(1, debug, sd, "status: (1E) 0x%02x, (1F) 0x%02x\n", | |
| saa711x_read(sd, R_1E_STATUS_BYTE_1_VD_DEC), | |
| saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC)); | |
| return 0; | |
| } | |
| /* ----------------------------------------------------------------------- */ | |
| static int saa711x_remove(struct i2c_client *client) | |
| { | |
| struct v4l2_subdev *sd = i2c_get_clientdata(client); | |
| v4l2_device_unregister_subdev(sd); | |
| v4l2_ctrl_handler_free(sd->ctrl_handler); | |
| return 0; | |
| } | |
| static const struct i2c_device_id saa711x_id[] = { | |
| { "saa7115_auto", 1 }, /* autodetect */ | |
| { "saa7111", 0 }, | |
| { "saa7113", 0 }, | |
| { "saa7114", 0 }, | |
| { "saa7115", 0 }, | |
| { "saa7118", 0 }, | |
| { "gm7113c", 0 }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(i2c, saa711x_id); | |
| static struct i2c_driver saa711x_driver = { | |
| .driver = { | |
| .name = "saa7115", | |
| }, | |
| .probe = saa711x_probe, | |
| .remove = saa711x_remove, | |
| .id_table = saa711x_id, | |
| }; | |
| module_i2c_driver(saa711x_driver); |