| /* | |
| * ppi.c Analog Devices Parallel Peripheral Interface driver | |
| * | |
| * Copyright (c) 2011 Analog Devices Inc. | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/slab.h> | |
| #include <linux/platform_device.h> | |
| #include <asm/bfin_ppi.h> | |
| #include <asm/blackfin.h> | |
| #include <asm/cacheflush.h> | |
| #include <asm/dma.h> | |
| #include <asm/portmux.h> | |
| #include <media/blackfin/ppi.h> | |
| static int ppi_attach_irq(struct ppi_if *ppi, irq_handler_t handler); | |
| static void ppi_detach_irq(struct ppi_if *ppi); | |
| static int ppi_start(struct ppi_if *ppi); | |
| static int ppi_stop(struct ppi_if *ppi); | |
| static int ppi_set_params(struct ppi_if *ppi, struct ppi_params *params); | |
| static void ppi_update_addr(struct ppi_if *ppi, unsigned long addr); | |
| static const struct ppi_ops ppi_ops = { | |
| .attach_irq = ppi_attach_irq, | |
| .detach_irq = ppi_detach_irq, | |
| .start = ppi_start, | |
| .stop = ppi_stop, | |
| .set_params = ppi_set_params, | |
| .update_addr = ppi_update_addr, | |
| }; | |
| static irqreturn_t ppi_irq_err(int irq, void *dev_id) | |
| { | |
| struct ppi_if *ppi = dev_id; | |
| const struct ppi_info *info = ppi->info; | |
| switch (info->type) { | |
| case PPI_TYPE_PPI: | |
| { | |
| struct bfin_ppi_regs *reg = info->base; | |
| unsigned short status; | |
| /* register on bf561 is cleared when read | |
| * others are W1C | |
| */ | |
| status = bfin_read16(®->status); | |
| if (status & 0x3000) | |
| ppi->err = true; | |
| bfin_write16(®->status, 0xff00); | |
| break; | |
| } | |
| case PPI_TYPE_EPPI: | |
| { | |
| struct bfin_eppi_regs *reg = info->base; | |
| unsigned short status; | |
| status = bfin_read16(®->status); | |
| if (status & 0x2) | |
| ppi->err = true; | |
| bfin_write16(®->status, 0xffff); | |
| break; | |
| } | |
| case PPI_TYPE_EPPI3: | |
| { | |
| struct bfin_eppi3_regs *reg = info->base; | |
| unsigned long stat; | |
| stat = bfin_read32(®->stat); | |
| if (stat & 0x2) | |
| ppi->err = true; | |
| bfin_write32(®->stat, 0xc0ff); | |
| break; | |
| } | |
| default: | |
| break; | |
| } | |
| return IRQ_HANDLED; | |
| } | |
| static int ppi_attach_irq(struct ppi_if *ppi, irq_handler_t handler) | |
| { | |
| const struct ppi_info *info = ppi->info; | |
| int ret; | |
| ret = request_dma(info->dma_ch, "PPI_DMA"); | |
| if (ret) { | |
| pr_err("Unable to allocate DMA channel for PPI\n"); | |
| return ret; | |
| } | |
| set_dma_callback(info->dma_ch, handler, ppi); | |
| if (ppi->err_int) { | |
| ret = request_irq(info->irq_err, ppi_irq_err, 0, "PPI ERROR", ppi); | |
| if (ret) { | |
| pr_err("Unable to allocate IRQ for PPI\n"); | |
| free_dma(info->dma_ch); | |
| } | |
| } | |
| return ret; | |
| } | |
| static void ppi_detach_irq(struct ppi_if *ppi) | |
| { | |
| const struct ppi_info *info = ppi->info; | |
| if (ppi->err_int) | |
| free_irq(info->irq_err, ppi); | |
| free_dma(info->dma_ch); | |
| } | |
| static int ppi_start(struct ppi_if *ppi) | |
| { | |
| const struct ppi_info *info = ppi->info; | |
| /* enable DMA */ | |
| enable_dma(info->dma_ch); | |
| /* enable PPI */ | |
| ppi->ppi_control |= PORT_EN; | |
| switch (info->type) { | |
| case PPI_TYPE_PPI: | |
| { | |
| struct bfin_ppi_regs *reg = info->base; | |
| bfin_write16(®->control, ppi->ppi_control); | |
| break; | |
| } | |
| case PPI_TYPE_EPPI: | |
| { | |
| struct bfin_eppi_regs *reg = info->base; | |
| bfin_write32(®->control, ppi->ppi_control); | |
| break; | |
| } | |
| case PPI_TYPE_EPPI3: | |
| { | |
| struct bfin_eppi3_regs *reg = info->base; | |
| bfin_write32(®->ctl, ppi->ppi_control); | |
| break; | |
| } | |
| default: | |
| return -EINVAL; | |
| } | |
| SSYNC(); | |
| return 0; | |
| } | |
| static int ppi_stop(struct ppi_if *ppi) | |
| { | |
| const struct ppi_info *info = ppi->info; | |
| /* disable PPI */ | |
| ppi->ppi_control &= ~PORT_EN; | |
| switch (info->type) { | |
| case PPI_TYPE_PPI: | |
| { | |
| struct bfin_ppi_regs *reg = info->base; | |
| bfin_write16(®->control, ppi->ppi_control); | |
| break; | |
| } | |
| case PPI_TYPE_EPPI: | |
| { | |
| struct bfin_eppi_regs *reg = info->base; | |
| bfin_write32(®->control, ppi->ppi_control); | |
| break; | |
| } | |
| case PPI_TYPE_EPPI3: | |
| { | |
| struct bfin_eppi3_regs *reg = info->base; | |
| bfin_write32(®->ctl, ppi->ppi_control); | |
| break; | |
| } | |
| default: | |
| return -EINVAL; | |
| } | |
| /* disable DMA */ | |
| clear_dma_irqstat(info->dma_ch); | |
| disable_dma(info->dma_ch); | |
| SSYNC(); | |
| return 0; | |
| } | |
| static int ppi_set_params(struct ppi_if *ppi, struct ppi_params *params) | |
| { | |
| const struct ppi_info *info = ppi->info; | |
| int dma32 = 0; | |
| int dma_config, bytes_per_line; | |
| int hcount, hdelay, samples_per_line; | |
| #ifdef CONFIG_PINCTRL | |
| static const char * const pin_state[] = {"8bit", "16bit", "24bit"}; | |
| struct pinctrl *pctrl; | |
| struct pinctrl_state *pstate; | |
| if (params->dlen > 24 || params->dlen <= 0) | |
| return -EINVAL; | |
| pctrl = devm_pinctrl_get(ppi->dev); | |
| if (IS_ERR(pctrl)) | |
| return PTR_ERR(pctrl); | |
| pstate = pinctrl_lookup_state(pctrl, | |
| pin_state[(params->dlen + 7) / 8 - 1]); | |
| if (pinctrl_select_state(pctrl, pstate)) | |
| return -EINVAL; | |
| #endif | |
| bytes_per_line = params->width * params->bpp / 8; | |
| /* convert parameters unit from pixels to samples */ | |
| hcount = params->width * params->bpp / params->dlen; | |
| hdelay = params->hdelay * params->bpp / params->dlen; | |
| samples_per_line = params->line * params->bpp / params->dlen; | |
| if (params->int_mask == 0xFFFFFFFF) | |
| ppi->err_int = false; | |
| else | |
| ppi->err_int = true; | |
| dma_config = (DMA_FLOW_STOP | RESTART | DMA2D | DI_EN_Y); | |
| ppi->ppi_control = params->ppi_control & ~PORT_EN; | |
| if (!(ppi->ppi_control & PORT_DIR)) | |
| dma_config |= WNR; | |
| switch (info->type) { | |
| case PPI_TYPE_PPI: | |
| { | |
| struct bfin_ppi_regs *reg = info->base; | |
| if (params->ppi_control & DMA32) | |
| dma32 = 1; | |
| bfin_write16(®->control, ppi->ppi_control); | |
| bfin_write16(®->count, samples_per_line - 1); | |
| bfin_write16(®->frame, params->frame); | |
| break; | |
| } | |
| case PPI_TYPE_EPPI: | |
| { | |
| struct bfin_eppi_regs *reg = info->base; | |
| if ((params->ppi_control & PACK_EN) | |
| || (params->ppi_control & 0x38000) > DLEN_16) | |
| dma32 = 1; | |
| bfin_write32(®->control, ppi->ppi_control); | |
| bfin_write16(®->line, samples_per_line); | |
| bfin_write16(®->frame, params->frame); | |
| bfin_write16(®->hdelay, hdelay); | |
| bfin_write16(®->vdelay, params->vdelay); | |
| bfin_write16(®->hcount, hcount); | |
| bfin_write16(®->vcount, params->height); | |
| break; | |
| } | |
| case PPI_TYPE_EPPI3: | |
| { | |
| struct bfin_eppi3_regs *reg = info->base; | |
| if ((params->ppi_control & PACK_EN) | |
| || (params->ppi_control & 0x70000) > DLEN_16) | |
| dma32 = 1; | |
| bfin_write32(®->ctl, ppi->ppi_control); | |
| bfin_write32(®->line, samples_per_line); | |
| bfin_write32(®->frame, params->frame); | |
| bfin_write32(®->hdly, hdelay); | |
| bfin_write32(®->vdly, params->vdelay); | |
| bfin_write32(®->hcnt, hcount); | |
| bfin_write32(®->vcnt, params->height); | |
| if (params->int_mask) | |
| bfin_write32(®->imsk, params->int_mask & 0xFF); | |
| if (ppi->ppi_control & PORT_DIR) { | |
| u32 hsync_width, vsync_width, vsync_period; | |
| hsync_width = params->hsync | |
| * params->bpp / params->dlen; | |
| vsync_width = params->vsync * samples_per_line; | |
| vsync_period = samples_per_line * params->frame; | |
| bfin_write32(®->fs1_wlhb, hsync_width); | |
| bfin_write32(®->fs1_paspl, samples_per_line); | |
| bfin_write32(®->fs2_wlvb, vsync_width); | |
| bfin_write32(®->fs2_palpf, vsync_period); | |
| } | |
| break; | |
| } | |
| default: | |
| return -EINVAL; | |
| } | |
| if (dma32) { | |
| dma_config |= WDSIZE_32 | PSIZE_32; | |
| set_dma_x_count(info->dma_ch, bytes_per_line >> 2); | |
| set_dma_x_modify(info->dma_ch, 4); | |
| set_dma_y_modify(info->dma_ch, 4); | |
| } else { | |
| dma_config |= WDSIZE_16 | PSIZE_16; | |
| set_dma_x_count(info->dma_ch, bytes_per_line >> 1); | |
| set_dma_x_modify(info->dma_ch, 2); | |
| set_dma_y_modify(info->dma_ch, 2); | |
| } | |
| set_dma_y_count(info->dma_ch, params->height); | |
| set_dma_config(info->dma_ch, dma_config); | |
| SSYNC(); | |
| return 0; | |
| } | |
| static void ppi_update_addr(struct ppi_if *ppi, unsigned long addr) | |
| { | |
| set_dma_start_addr(ppi->info->dma_ch, addr); | |
| } | |
| struct ppi_if *ppi_create_instance(struct platform_device *pdev, | |
| const struct ppi_info *info) | |
| { | |
| struct ppi_if *ppi; | |
| if (!info || !info->pin_req) | |
| return NULL; | |
| #ifndef CONFIG_PINCTRL | |
| if (peripheral_request_list(info->pin_req, KBUILD_MODNAME)) { | |
| dev_err(&pdev->dev, "request peripheral failed\n"); | |
| return NULL; | |
| } | |
| #endif | |
| ppi = kzalloc(sizeof(*ppi), GFP_KERNEL); | |
| if (!ppi) { | |
| peripheral_free_list(info->pin_req); | |
| dev_err(&pdev->dev, "unable to allocate memory for ppi handle\n"); | |
| return NULL; | |
| } | |
| ppi->ops = &ppi_ops; | |
| ppi->info = info; | |
| ppi->dev = &pdev->dev; | |
| pr_info("ppi probe success\n"); | |
| return ppi; | |
| } | |
| EXPORT_SYMBOL(ppi_create_instance); | |
| void ppi_delete_instance(struct ppi_if *ppi) | |
| { | |
| peripheral_free_list(ppi->info->pin_req); | |
| kfree(ppi); | |
| } | |
| EXPORT_SYMBOL(ppi_delete_instance); | |
| MODULE_DESCRIPTION("Analog Devices PPI driver"); | |
| MODULE_AUTHOR("Scott Jiang <Scott.Jiang.Linux@gmail.com>"); | |
| MODULE_LICENSE("GPL v2"); |