| /* | |
| * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation version 2. | |
| * | |
| * This program is distributed WITHOUT ANY WARRANTY of any | |
| * kind, whether express or implied; without even the implied warranty | |
| * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/init.h> | |
| #include <linux/module.h> | |
| #include <linux/errno.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/string.h> | |
| #include <linux/wait.h> | |
| #include <linux/time.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/irq.h> | |
| #include <linux/mm.h> | |
| #include <linux/mutex.h> | |
| #include <linux/videodev2.h> | |
| #include <linux/slab.h> | |
| #include <asm/pgtable.h> | |
| #include <mach/cputype.h> | |
| #include <media/v4l2-dev.h> | |
| #include <media/v4l2-common.h> | |
| #include <media/v4l2-ioctl.h> | |
| #include <media/v4l2-device.h> | |
| #include <media/davinci/vpbe_display.h> | |
| #include <media/davinci/vpbe_types.h> | |
| #include <media/davinci/vpbe.h> | |
| #include <media/davinci/vpbe_venc.h> | |
| #include <media/davinci/vpbe_osd.h> | |
| #include "vpbe_venc_regs.h" | |
| #define VPBE_DISPLAY_DRIVER "vpbe-v4l2" | |
| static int debug; | |
| #define VPBE_DEFAULT_NUM_BUFS 3 | |
| module_param(debug, int, 0644); | |
| static int vpbe_set_osd_display_params(struct vpbe_display *disp_dev, | |
| struct vpbe_layer *layer); | |
| static int venc_is_second_field(struct vpbe_display *disp_dev) | |
| { | |
| struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; | |
| int ret; | |
| int val; | |
| ret = v4l2_subdev_call(vpbe_dev->venc, | |
| core, | |
| ioctl, | |
| VENC_GET_FLD, | |
| &val); | |
| if (ret < 0) { | |
| v4l2_err(&vpbe_dev->v4l2_dev, | |
| "Error in getting Field ID 0\n"); | |
| } | |
| return val; | |
| } | |
| static void vpbe_isr_even_field(struct vpbe_display *disp_obj, | |
| struct vpbe_layer *layer) | |
| { | |
| if (layer->cur_frm == layer->next_frm) | |
| return; | |
| layer->cur_frm->vb.vb2_buf.timestamp = ktime_get_ns(); | |
| vb2_buffer_done(&layer->cur_frm->vb.vb2_buf, VB2_BUF_STATE_DONE); | |
| /* Make cur_frm pointing to next_frm */ | |
| layer->cur_frm = layer->next_frm; | |
| } | |
| static void vpbe_isr_odd_field(struct vpbe_display *disp_obj, | |
| struct vpbe_layer *layer) | |
| { | |
| struct osd_state *osd_device = disp_obj->osd_device; | |
| unsigned long addr; | |
| spin_lock(&disp_obj->dma_queue_lock); | |
| if (list_empty(&layer->dma_queue) || | |
| (layer->cur_frm != layer->next_frm)) { | |
| spin_unlock(&disp_obj->dma_queue_lock); | |
| return; | |
| } | |
| /* | |
| * one field is displayed configure | |
| * the next frame if it is available | |
| * otherwise hold on current frame | |
| * Get next from the buffer queue | |
| */ | |
| layer->next_frm = list_entry(layer->dma_queue.next, | |
| struct vpbe_disp_buffer, list); | |
| /* Remove that from the buffer queue */ | |
| list_del(&layer->next_frm->list); | |
| spin_unlock(&disp_obj->dma_queue_lock); | |
| /* Mark state of the frame to active */ | |
| layer->next_frm->vb.vb2_buf.state = VB2_BUF_STATE_ACTIVE; | |
| addr = vb2_dma_contig_plane_dma_addr(&layer->next_frm->vb.vb2_buf, 0); | |
| osd_device->ops.start_layer(osd_device, | |
| layer->layer_info.id, | |
| addr, | |
| disp_obj->cbcr_ofst); | |
| } | |
| /* interrupt service routine */ | |
| static irqreturn_t venc_isr(int irq, void *arg) | |
| { | |
| struct vpbe_display *disp_dev = (struct vpbe_display *)arg; | |
| struct vpbe_layer *layer; | |
| static unsigned last_event; | |
| unsigned event = 0; | |
| int fid; | |
| int i; | |
| if ((NULL == arg) || (NULL == disp_dev->dev[0])) | |
| return IRQ_HANDLED; | |
| if (venc_is_second_field(disp_dev)) | |
| event |= VENC_SECOND_FIELD; | |
| else | |
| event |= VENC_FIRST_FIELD; | |
| if (event == (last_event & ~VENC_END_OF_FRAME)) { | |
| /* | |
| * If the display is non-interlaced, then we need to flag the | |
| * end-of-frame event at every interrupt regardless of the | |
| * value of the FIDST bit. We can conclude that the display is | |
| * non-interlaced if the value of the FIDST bit is unchanged | |
| * from the previous interrupt. | |
| */ | |
| event |= VENC_END_OF_FRAME; | |
| } else if (event == VENC_SECOND_FIELD) { | |
| /* end-of-frame for interlaced display */ | |
| event |= VENC_END_OF_FRAME; | |
| } | |
| last_event = event; | |
| for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) { | |
| layer = disp_dev->dev[i]; | |
| if (!vb2_start_streaming_called(&layer->buffer_queue)) | |
| continue; | |
| if (layer->layer_first_int) { | |
| layer->layer_first_int = 0; | |
| continue; | |
| } | |
| /* Check the field format */ | |
| if ((V4L2_FIELD_NONE == layer->pix_fmt.field) && | |
| (event & VENC_END_OF_FRAME)) { | |
| /* Progressive mode */ | |
| vpbe_isr_even_field(disp_dev, layer); | |
| vpbe_isr_odd_field(disp_dev, layer); | |
| } else { | |
| /* Interlaced mode */ | |
| layer->field_id ^= 1; | |
| if (event & VENC_FIRST_FIELD) | |
| fid = 0; | |
| else | |
| fid = 1; | |
| /* | |
| * If field id does not match with store | |
| * field id | |
| */ | |
| if (fid != layer->field_id) { | |
| /* Make them in sync */ | |
| layer->field_id = fid; | |
| continue; | |
| } | |
| /* | |
| * device field id and local field id are | |
| * in sync. If this is even field | |
| */ | |
| if (0 == fid) | |
| vpbe_isr_even_field(disp_dev, layer); | |
| else /* odd field */ | |
| vpbe_isr_odd_field(disp_dev, layer); | |
| } | |
| } | |
| return IRQ_HANDLED; | |
| } | |
| /* | |
| * vpbe_buffer_prepare() | |
| * This is the callback function called from vb2_qbuf() function | |
| * the buffer is prepared and user space virtual address is converted into | |
| * physical address | |
| */ | |
| static int vpbe_buffer_prepare(struct vb2_buffer *vb) | |
| { | |
| struct vb2_queue *q = vb->vb2_queue; | |
| struct vpbe_layer *layer = vb2_get_drv_priv(q); | |
| struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev; | |
| unsigned long addr; | |
| v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, | |
| "vpbe_buffer_prepare\n"); | |
| vb2_set_plane_payload(vb, 0, layer->pix_fmt.sizeimage); | |
| if (vb2_get_plane_payload(vb, 0) > vb2_plane_size(vb, 0)) | |
| return -EINVAL; | |
| addr = vb2_dma_contig_plane_dma_addr(vb, 0); | |
| if (!IS_ALIGNED(addr, 8)) { | |
| v4l2_err(&vpbe_dev->v4l2_dev, | |
| "buffer_prepare:offset is not aligned to 32 bytes\n"); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * vpbe_buffer_setup() | |
| * This function allocates memory for the buffers | |
| */ | |
| static int | |
| vpbe_buffer_queue_setup(struct vb2_queue *vq, | |
| unsigned int *nbuffers, unsigned int *nplanes, | |
| unsigned int sizes[], struct device *alloc_devs[]) | |
| { | |
| /* Get the file handle object and layer object */ | |
| struct vpbe_layer *layer = vb2_get_drv_priv(vq); | |
| struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev; | |
| v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_buffer_setup\n"); | |
| /* Store number of buffers allocated in numbuffer member */ | |
| if (vq->num_buffers + *nbuffers < VPBE_DEFAULT_NUM_BUFS) | |
| *nbuffers = VPBE_DEFAULT_NUM_BUFS - vq->num_buffers; | |
| if (*nplanes) | |
| return sizes[0] < layer->pix_fmt.sizeimage ? -EINVAL : 0; | |
| *nplanes = 1; | |
| sizes[0] = layer->pix_fmt.sizeimage; | |
| return 0; | |
| } | |
| /* | |
| * vpbe_buffer_queue() | |
| * This function adds the buffer to DMA queue | |
| */ | |
| static void vpbe_buffer_queue(struct vb2_buffer *vb) | |
| { | |
| struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); | |
| /* Get the file handle object and layer object */ | |
| struct vpbe_disp_buffer *buf = container_of(vbuf, | |
| struct vpbe_disp_buffer, vb); | |
| struct vpbe_layer *layer = vb2_get_drv_priv(vb->vb2_queue); | |
| struct vpbe_display *disp = layer->disp_dev; | |
| struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev; | |
| unsigned long flags; | |
| v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, | |
| "vpbe_buffer_queue\n"); | |
| /* add the buffer to the DMA queue */ | |
| spin_lock_irqsave(&disp->dma_queue_lock, flags); | |
| list_add_tail(&buf->list, &layer->dma_queue); | |
| spin_unlock_irqrestore(&disp->dma_queue_lock, flags); | |
| } | |
| static int vpbe_start_streaming(struct vb2_queue *vq, unsigned int count) | |
| { | |
| struct vpbe_layer *layer = vb2_get_drv_priv(vq); | |
| struct osd_state *osd_device = layer->disp_dev->osd_device; | |
| int ret; | |
| osd_device->ops.disable_layer(osd_device, layer->layer_info.id); | |
| /* Get the next frame from the buffer queue */ | |
| layer->next_frm = layer->cur_frm = list_entry(layer->dma_queue.next, | |
| struct vpbe_disp_buffer, list); | |
| /* Remove buffer from the buffer queue */ | |
| list_del(&layer->cur_frm->list); | |
| /* Mark state of the current frame to active */ | |
| layer->cur_frm->vb.vb2_buf.state = VB2_BUF_STATE_ACTIVE; | |
| /* Initialize field_id and started member */ | |
| layer->field_id = 0; | |
| /* Set parameters in OSD and VENC */ | |
| ret = vpbe_set_osd_display_params(layer->disp_dev, layer); | |
| if (ret < 0) { | |
| struct vpbe_disp_buffer *buf, *tmp; | |
| vb2_buffer_done(&layer->cur_frm->vb.vb2_buf, | |
| VB2_BUF_STATE_QUEUED); | |
| list_for_each_entry_safe(buf, tmp, &layer->dma_queue, list) { | |
| list_del(&buf->list); | |
| vb2_buffer_done(&buf->vb.vb2_buf, | |
| VB2_BUF_STATE_QUEUED); | |
| } | |
| return ret; | |
| } | |
| /* | |
| * if request format is yuv420 semiplanar, need to | |
| * enable both video windows | |
| */ | |
| layer->layer_first_int = 1; | |
| return ret; | |
| } | |
| static void vpbe_stop_streaming(struct vb2_queue *vq) | |
| { | |
| struct vpbe_layer *layer = vb2_get_drv_priv(vq); | |
| struct osd_state *osd_device = layer->disp_dev->osd_device; | |
| struct vpbe_display *disp = layer->disp_dev; | |
| unsigned long flags; | |
| if (!vb2_is_streaming(vq)) | |
| return; | |
| osd_device->ops.disable_layer(osd_device, layer->layer_info.id); | |
| /* release all active buffers */ | |
| spin_lock_irqsave(&disp->dma_queue_lock, flags); | |
| if (layer->cur_frm == layer->next_frm) { | |
| vb2_buffer_done(&layer->cur_frm->vb.vb2_buf, | |
| VB2_BUF_STATE_ERROR); | |
| } else { | |
| if (layer->cur_frm != NULL) | |
| vb2_buffer_done(&layer->cur_frm->vb.vb2_buf, | |
| VB2_BUF_STATE_ERROR); | |
| if (layer->next_frm != NULL) | |
| vb2_buffer_done(&layer->next_frm->vb.vb2_buf, | |
| VB2_BUF_STATE_ERROR); | |
| } | |
| while (!list_empty(&layer->dma_queue)) { | |
| layer->next_frm = list_entry(layer->dma_queue.next, | |
| struct vpbe_disp_buffer, list); | |
| list_del(&layer->next_frm->list); | |
| vb2_buffer_done(&layer->next_frm->vb.vb2_buf, | |
| VB2_BUF_STATE_ERROR); | |
| } | |
| spin_unlock_irqrestore(&disp->dma_queue_lock, flags); | |
| } | |
| static const struct vb2_ops video_qops = { | |
| .queue_setup = vpbe_buffer_queue_setup, | |
| .wait_prepare = vb2_ops_wait_prepare, | |
| .wait_finish = vb2_ops_wait_finish, | |
| .buf_prepare = vpbe_buffer_prepare, | |
| .start_streaming = vpbe_start_streaming, | |
| .stop_streaming = vpbe_stop_streaming, | |
| .buf_queue = vpbe_buffer_queue, | |
| }; | |
| static | |
| struct vpbe_layer* | |
| _vpbe_display_get_other_win_layer(struct vpbe_display *disp_dev, | |
| struct vpbe_layer *layer) | |
| { | |
| enum vpbe_display_device_id thiswin, otherwin; | |
| thiswin = layer->device_id; | |
| otherwin = (thiswin == VPBE_DISPLAY_DEVICE_0) ? | |
| VPBE_DISPLAY_DEVICE_1 : VPBE_DISPLAY_DEVICE_0; | |
| return disp_dev->dev[otherwin]; | |
| } | |
| static int vpbe_set_osd_display_params(struct vpbe_display *disp_dev, | |
| struct vpbe_layer *layer) | |
| { | |
| struct osd_layer_config *cfg = &layer->layer_info.config; | |
| struct osd_state *osd_device = disp_dev->osd_device; | |
| struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; | |
| unsigned long addr; | |
| int ret; | |
| addr = vb2_dma_contig_plane_dma_addr(&layer->cur_frm->vb.vb2_buf, 0); | |
| /* Set address in the display registers */ | |
| osd_device->ops.start_layer(osd_device, | |
| layer->layer_info.id, | |
| addr, | |
| disp_dev->cbcr_ofst); | |
| ret = osd_device->ops.enable_layer(osd_device, | |
| layer->layer_info.id, 0); | |
| if (ret < 0) { | |
| v4l2_err(&vpbe_dev->v4l2_dev, | |
| "Error in enabling osd window layer 0\n"); | |
| return -1; | |
| } | |
| /* Enable the window */ | |
| layer->layer_info.enable = 1; | |
| if (cfg->pixfmt == PIXFMT_NV12) { | |
| struct vpbe_layer *otherlayer = | |
| _vpbe_display_get_other_win_layer(disp_dev, layer); | |
| ret = osd_device->ops.enable_layer(osd_device, | |
| otherlayer->layer_info.id, 1); | |
| if (ret < 0) { | |
| v4l2_err(&vpbe_dev->v4l2_dev, | |
| "Error in enabling osd window layer 1\n"); | |
| return -1; | |
| } | |
| otherlayer->layer_info.enable = 1; | |
| } | |
| return 0; | |
| } | |
| static void | |
| vpbe_disp_calculate_scale_factor(struct vpbe_display *disp_dev, | |
| struct vpbe_layer *layer, | |
| int expected_xsize, int expected_ysize) | |
| { | |
| struct display_layer_info *layer_info = &layer->layer_info; | |
| struct v4l2_pix_format *pixfmt = &layer->pix_fmt; | |
| struct osd_layer_config *cfg = &layer->layer_info.config; | |
| struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; | |
| int calculated_xsize; | |
| int h_exp = 0; | |
| int v_exp = 0; | |
| int h_scale; | |
| int v_scale; | |
| v4l2_std_id standard_id = vpbe_dev->current_timings.std_id; | |
| /* | |
| * Application initially set the image format. Current display | |
| * size is obtained from the vpbe display controller. expected_xsize | |
| * and expected_ysize are set through S_SELECTION ioctl. Based on this, | |
| * driver will calculate the scale factors for vertical and | |
| * horizontal direction so that the image is displayed scaled | |
| * and expanded. Application uses expansion to display the image | |
| * in a square pixel. Otherwise it is displayed using displays | |
| * pixel aspect ratio.It is expected that application chooses | |
| * the crop coordinates for cropped or scaled display. if crop | |
| * size is less than the image size, it is displayed cropped or | |
| * it is displayed scaled and/or expanded. | |
| * | |
| * to begin with, set the crop window same as expected. Later we | |
| * will override with scaled window size | |
| */ | |
| cfg->xsize = pixfmt->width; | |
| cfg->ysize = pixfmt->height; | |
| layer_info->h_zoom = ZOOM_X1; /* no horizontal zoom */ | |
| layer_info->v_zoom = ZOOM_X1; /* no horizontal zoom */ | |
| layer_info->h_exp = H_EXP_OFF; /* no horizontal zoom */ | |
| layer_info->v_exp = V_EXP_OFF; /* no horizontal zoom */ | |
| if (pixfmt->width < expected_xsize) { | |
| h_scale = vpbe_dev->current_timings.xres / pixfmt->width; | |
| if (h_scale < 2) | |
| h_scale = 1; | |
| else if (h_scale >= 4) | |
| h_scale = 4; | |
| else | |
| h_scale = 2; | |
| cfg->xsize *= h_scale; | |
| if (cfg->xsize < expected_xsize) { | |
| if ((standard_id & V4L2_STD_525_60) || | |
| (standard_id & V4L2_STD_625_50)) { | |
| calculated_xsize = (cfg->xsize * | |
| VPBE_DISPLAY_H_EXP_RATIO_N) / | |
| VPBE_DISPLAY_H_EXP_RATIO_D; | |
| if (calculated_xsize <= expected_xsize) { | |
| h_exp = 1; | |
| cfg->xsize = calculated_xsize; | |
| } | |
| } | |
| } | |
| if (h_scale == 2) | |
| layer_info->h_zoom = ZOOM_X2; | |
| else if (h_scale == 4) | |
| layer_info->h_zoom = ZOOM_X4; | |
| if (h_exp) | |
| layer_info->h_exp = H_EXP_9_OVER_8; | |
| } else { | |
| /* no scaling, only cropping. Set display area to crop area */ | |
| cfg->xsize = expected_xsize; | |
| } | |
| if (pixfmt->height < expected_ysize) { | |
| v_scale = expected_ysize / pixfmt->height; | |
| if (v_scale < 2) | |
| v_scale = 1; | |
| else if (v_scale >= 4) | |
| v_scale = 4; | |
| else | |
| v_scale = 2; | |
| cfg->ysize *= v_scale; | |
| if (cfg->ysize < expected_ysize) { | |
| if ((standard_id & V4L2_STD_625_50)) { | |
| calculated_xsize = (cfg->ysize * | |
| VPBE_DISPLAY_V_EXP_RATIO_N) / | |
| VPBE_DISPLAY_V_EXP_RATIO_D; | |
| if (calculated_xsize <= expected_ysize) { | |
| v_exp = 1; | |
| cfg->ysize = calculated_xsize; | |
| } | |
| } | |
| } | |
| if (v_scale == 2) | |
| layer_info->v_zoom = ZOOM_X2; | |
| else if (v_scale == 4) | |
| layer_info->v_zoom = ZOOM_X4; | |
| if (v_exp) | |
| layer_info->h_exp = V_EXP_6_OVER_5; | |
| } else { | |
| /* no scaling, only cropping. Set display area to crop area */ | |
| cfg->ysize = expected_ysize; | |
| } | |
| v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, | |
| "crop display xsize = %d, ysize = %d\n", | |
| cfg->xsize, cfg->ysize); | |
| } | |
| static void vpbe_disp_adj_position(struct vpbe_display *disp_dev, | |
| struct vpbe_layer *layer, | |
| int top, int left) | |
| { | |
| struct osd_layer_config *cfg = &layer->layer_info.config; | |
| struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; | |
| cfg->xpos = min((unsigned int)left, | |
| vpbe_dev->current_timings.xres - cfg->xsize); | |
| cfg->ypos = min((unsigned int)top, | |
| vpbe_dev->current_timings.yres - cfg->ysize); | |
| v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, | |
| "new xpos = %d, ypos = %d\n", | |
| cfg->xpos, cfg->ypos); | |
| } | |
| static void vpbe_disp_check_window_params(struct vpbe_display *disp_dev, | |
| struct v4l2_rect *c) | |
| { | |
| struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; | |
| if ((c->width == 0) || | |
| ((c->width + c->left) > vpbe_dev->current_timings.xres)) | |
| c->width = vpbe_dev->current_timings.xres - c->left; | |
| if ((c->height == 0) || ((c->height + c->top) > | |
| vpbe_dev->current_timings.yres)) | |
| c->height = vpbe_dev->current_timings.yres - c->top; | |
| /* window height must be even for interlaced display */ | |
| if (vpbe_dev->current_timings.interlaced) | |
| c->height &= (~0x01); | |
| } | |
| /** | |
| * vpbe_try_format() | |
| * If user application provides width and height, and have bytesperline set | |
| * to zero, driver calculates bytesperline and sizeimage based on hardware | |
| * limits. | |
| */ | |
| static int vpbe_try_format(struct vpbe_display *disp_dev, | |
| struct v4l2_pix_format *pixfmt, int check) | |
| { | |
| struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; | |
| int min_height = 1; | |
| int min_width = 32; | |
| int max_height; | |
| int max_width; | |
| int bpp; | |
| if ((pixfmt->pixelformat != V4L2_PIX_FMT_UYVY) && | |
| (pixfmt->pixelformat != V4L2_PIX_FMT_NV12)) | |
| /* choose default as V4L2_PIX_FMT_UYVY */ | |
| pixfmt->pixelformat = V4L2_PIX_FMT_UYVY; | |
| /* Check the field format */ | |
| if ((pixfmt->field != V4L2_FIELD_INTERLACED) && | |
| (pixfmt->field != V4L2_FIELD_NONE)) { | |
| if (vpbe_dev->current_timings.interlaced) | |
| pixfmt->field = V4L2_FIELD_INTERLACED; | |
| else | |
| pixfmt->field = V4L2_FIELD_NONE; | |
| } | |
| if (pixfmt->field == V4L2_FIELD_INTERLACED) | |
| min_height = 2; | |
| if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12) | |
| bpp = 1; | |
| else | |
| bpp = 2; | |
| max_width = vpbe_dev->current_timings.xres; | |
| max_height = vpbe_dev->current_timings.yres; | |
| min_width /= bpp; | |
| if (!pixfmt->width || (pixfmt->width < min_width) || | |
| (pixfmt->width > max_width)) { | |
| pixfmt->width = vpbe_dev->current_timings.xres; | |
| } | |
| if (!pixfmt->height || (pixfmt->height < min_height) || | |
| (pixfmt->height > max_height)) { | |
| pixfmt->height = vpbe_dev->current_timings.yres; | |
| } | |
| if (pixfmt->bytesperline < (pixfmt->width * bpp)) | |
| pixfmt->bytesperline = pixfmt->width * bpp; | |
| /* Make the bytesperline 32 byte aligned */ | |
| pixfmt->bytesperline = ((pixfmt->width * bpp + 31) & ~31); | |
| if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12) | |
| pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height + | |
| (pixfmt->bytesperline * pixfmt->height >> 1); | |
| else | |
| pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height; | |
| return 0; | |
| } | |
| static int vpbe_display_querycap(struct file *file, void *priv, | |
| struct v4l2_capability *cap) | |
| { | |
| struct vpbe_layer *layer = video_drvdata(file); | |
| struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev; | |
| cap->device_caps = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING; | |
| cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; | |
| snprintf(cap->driver, sizeof(cap->driver), "%s", | |
| dev_name(vpbe_dev->pdev)); | |
| snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s", | |
| dev_name(vpbe_dev->pdev)); | |
| strlcpy(cap->card, vpbe_dev->cfg->module_name, sizeof(cap->card)); | |
| return 0; | |
| } | |
| static int vpbe_display_s_selection(struct file *file, void *priv, | |
| struct v4l2_selection *sel) | |
| { | |
| struct vpbe_layer *layer = video_drvdata(file); | |
| struct vpbe_display *disp_dev = layer->disp_dev; | |
| struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; | |
| struct osd_layer_config *cfg = &layer->layer_info.config; | |
| struct osd_state *osd_device = disp_dev->osd_device; | |
| struct v4l2_rect rect = sel->r; | |
| int ret; | |
| v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, | |
| "VIDIOC_S_SELECTION, layer id = %d\n", layer->device_id); | |
| if (sel->type != V4L2_BUF_TYPE_VIDEO_OUTPUT || | |
| sel->target != V4L2_SEL_TGT_CROP) | |
| return -EINVAL; | |
| if (rect.top < 0) | |
| rect.top = 0; | |
| if (rect.left < 0) | |
| rect.left = 0; | |
| vpbe_disp_check_window_params(disp_dev, &rect); | |
| osd_device->ops.get_layer_config(osd_device, | |
| layer->layer_info.id, cfg); | |
| vpbe_disp_calculate_scale_factor(disp_dev, layer, | |
| rect.width, | |
| rect.height); | |
| vpbe_disp_adj_position(disp_dev, layer, rect.top, | |
| rect.left); | |
| ret = osd_device->ops.set_layer_config(osd_device, | |
| layer->layer_info.id, cfg); | |
| if (ret < 0) { | |
| v4l2_err(&vpbe_dev->v4l2_dev, | |
| "Error in set layer config:\n"); | |
| return -EINVAL; | |
| } | |
| /* apply zooming and h or v expansion */ | |
| osd_device->ops.set_zoom(osd_device, | |
| layer->layer_info.id, | |
| layer->layer_info.h_zoom, | |
| layer->layer_info.v_zoom); | |
| ret = osd_device->ops.set_vid_expansion(osd_device, | |
| layer->layer_info.h_exp, | |
| layer->layer_info.v_exp); | |
| if (ret < 0) { | |
| v4l2_err(&vpbe_dev->v4l2_dev, | |
| "Error in set vid expansion:\n"); | |
| return -EINVAL; | |
| } | |
| if ((layer->layer_info.h_zoom != ZOOM_X1) || | |
| (layer->layer_info.v_zoom != ZOOM_X1) || | |
| (layer->layer_info.h_exp != H_EXP_OFF) || | |
| (layer->layer_info.v_exp != V_EXP_OFF)) | |
| /* Enable expansion filter */ | |
| osd_device->ops.set_interpolation_filter(osd_device, 1); | |
| else | |
| osd_device->ops.set_interpolation_filter(osd_device, 0); | |
| sel->r = rect; | |
| return 0; | |
| } | |
| static int vpbe_display_g_selection(struct file *file, void *priv, | |
| struct v4l2_selection *sel) | |
| { | |
| struct vpbe_layer *layer = video_drvdata(file); | |
| struct osd_layer_config *cfg = &layer->layer_info.config; | |
| struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev; | |
| struct osd_state *osd_device = layer->disp_dev->osd_device; | |
| struct v4l2_rect *rect = &sel->r; | |
| v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, | |
| "VIDIOC_G_SELECTION, layer id = %d\n", | |
| layer->device_id); | |
| if (sel->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) | |
| return -EINVAL; | |
| switch (sel->target) { | |
| case V4L2_SEL_TGT_CROP: | |
| osd_device->ops.get_layer_config(osd_device, | |
| layer->layer_info.id, cfg); | |
| rect->top = cfg->ypos; | |
| rect->left = cfg->xpos; | |
| rect->width = cfg->xsize; | |
| rect->height = cfg->ysize; | |
| break; | |
| case V4L2_SEL_TGT_CROP_DEFAULT: | |
| case V4L2_SEL_TGT_CROP_BOUNDS: | |
| rect->left = 0; | |
| rect->top = 0; | |
| rect->width = vpbe_dev->current_timings.xres; | |
| rect->height = vpbe_dev->current_timings.yres; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static int vpbe_display_cropcap(struct file *file, void *priv, | |
| struct v4l2_cropcap *cropcap) | |
| { | |
| struct vpbe_layer *layer = video_drvdata(file); | |
| struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev; | |
| v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_CROPCAP ioctl\n"); | |
| if (cropcap->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) | |
| return -EINVAL; | |
| cropcap->pixelaspect = vpbe_dev->current_timings.aspect; | |
| return 0; | |
| } | |
| static int vpbe_display_g_fmt(struct file *file, void *priv, | |
| struct v4l2_format *fmt) | |
| { | |
| struct vpbe_layer *layer = video_drvdata(file); | |
| struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev; | |
| v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, | |
| "VIDIOC_G_FMT, layer id = %d\n", | |
| layer->device_id); | |
| /* If buffer type is video output */ | |
| if (V4L2_BUF_TYPE_VIDEO_OUTPUT != fmt->type) { | |
| v4l2_err(&vpbe_dev->v4l2_dev, "invalid type\n"); | |
| return -EINVAL; | |
| } | |
| /* Fill in the information about format */ | |
| fmt->fmt.pix = layer->pix_fmt; | |
| return 0; | |
| } | |
| static int vpbe_display_enum_fmt(struct file *file, void *priv, | |
| struct v4l2_fmtdesc *fmt) | |
| { | |
| struct vpbe_layer *layer = video_drvdata(file); | |
| struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev; | |
| unsigned int index = 0; | |
| v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, | |
| "VIDIOC_ENUM_FMT, layer id = %d\n", | |
| layer->device_id); | |
| if (fmt->index > 1) { | |
| v4l2_err(&vpbe_dev->v4l2_dev, "Invalid format index\n"); | |
| return -EINVAL; | |
| } | |
| /* Fill in the information about format */ | |
| index = fmt->index; | |
| memset(fmt, 0, sizeof(*fmt)); | |
| fmt->index = index; | |
| fmt->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; | |
| if (index == 0) { | |
| strcpy(fmt->description, "YUV 4:2:2 - UYVY"); | |
| fmt->pixelformat = V4L2_PIX_FMT_UYVY; | |
| } else { | |
| strcpy(fmt->description, "Y/CbCr 4:2:0"); | |
| fmt->pixelformat = V4L2_PIX_FMT_NV12; | |
| } | |
| return 0; | |
| } | |
| static int vpbe_display_s_fmt(struct file *file, void *priv, | |
| struct v4l2_format *fmt) | |
| { | |
| struct vpbe_layer *layer = video_drvdata(file); | |
| struct vpbe_display *disp_dev = layer->disp_dev; | |
| struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; | |
| struct osd_layer_config *cfg = &layer->layer_info.config; | |
| struct v4l2_pix_format *pixfmt = &fmt->fmt.pix; | |
| struct osd_state *osd_device = disp_dev->osd_device; | |
| int ret; | |
| v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, | |
| "VIDIOC_S_FMT, layer id = %d\n", | |
| layer->device_id); | |
| if (vb2_is_busy(&layer->buffer_queue)) | |
| return -EBUSY; | |
| if (V4L2_BUF_TYPE_VIDEO_OUTPUT != fmt->type) { | |
| v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "invalid type\n"); | |
| return -EINVAL; | |
| } | |
| /* Check for valid pixel format */ | |
| ret = vpbe_try_format(disp_dev, pixfmt, 1); | |
| if (ret) | |
| return ret; | |
| /* YUV420 is requested, check availability of the | |
| other video window */ | |
| layer->pix_fmt = *pixfmt; | |
| if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12) { | |
| struct vpbe_layer *otherlayer; | |
| otherlayer = _vpbe_display_get_other_win_layer(disp_dev, layer); | |
| /* if other layer is available, only | |
| * claim it, do not configure it | |
| */ | |
| ret = osd_device->ops.request_layer(osd_device, | |
| otherlayer->layer_info.id); | |
| if (ret < 0) { | |
| v4l2_err(&vpbe_dev->v4l2_dev, | |
| "Display Manager failed to allocate layer\n"); | |
| return -EBUSY; | |
| } | |
| } | |
| /* Get osd layer config */ | |
| osd_device->ops.get_layer_config(osd_device, | |
| layer->layer_info.id, cfg); | |
| /* Store the pixel format in the layer object */ | |
| cfg->xsize = pixfmt->width; | |
| cfg->ysize = pixfmt->height; | |
| cfg->line_length = pixfmt->bytesperline; | |
| cfg->ypos = 0; | |
| cfg->xpos = 0; | |
| cfg->interlaced = vpbe_dev->current_timings.interlaced; | |
| if (V4L2_PIX_FMT_UYVY == pixfmt->pixelformat) | |
| cfg->pixfmt = PIXFMT_YCBCRI; | |
| /* Change of the default pixel format for both video windows */ | |
| if (V4L2_PIX_FMT_NV12 == pixfmt->pixelformat) { | |
| struct vpbe_layer *otherlayer; | |
| cfg->pixfmt = PIXFMT_NV12; | |
| otherlayer = _vpbe_display_get_other_win_layer(disp_dev, | |
| layer); | |
| otherlayer->layer_info.config.pixfmt = PIXFMT_NV12; | |
| } | |
| /* Set the layer config in the osd window */ | |
| ret = osd_device->ops.set_layer_config(osd_device, | |
| layer->layer_info.id, cfg); | |
| if (ret < 0) { | |
| v4l2_err(&vpbe_dev->v4l2_dev, | |
| "Error in S_FMT params:\n"); | |
| return -EINVAL; | |
| } | |
| /* Readback and fill the local copy of current pix format */ | |
| osd_device->ops.get_layer_config(osd_device, | |
| layer->layer_info.id, cfg); | |
| return 0; | |
| } | |
| static int vpbe_display_try_fmt(struct file *file, void *priv, | |
| struct v4l2_format *fmt) | |
| { | |
| struct vpbe_layer *layer = video_drvdata(file); | |
| struct vpbe_display *disp_dev = layer->disp_dev; | |
| struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev; | |
| struct v4l2_pix_format *pixfmt = &fmt->fmt.pix; | |
| v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_TRY_FMT\n"); | |
| if (V4L2_BUF_TYPE_VIDEO_OUTPUT != fmt->type) { | |
| v4l2_err(&vpbe_dev->v4l2_dev, "invalid type\n"); | |
| return -EINVAL; | |
| } | |
| /* Check for valid field format */ | |
| return vpbe_try_format(disp_dev, pixfmt, 0); | |
| } | |
| /** | |
| * vpbe_display_s_std - Set the given standard in the encoder | |
| * | |
| * Sets the standard if supported by the current encoder. Return the status. | |
| * 0 - success & -EINVAL on error | |
| */ | |
| static int vpbe_display_s_std(struct file *file, void *priv, | |
| v4l2_std_id std_id) | |
| { | |
| struct vpbe_layer *layer = video_drvdata(file); | |
| struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev; | |
| int ret; | |
| v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_S_STD\n"); | |
| if (vb2_is_busy(&layer->buffer_queue)) | |
| return -EBUSY; | |
| if (NULL != vpbe_dev->ops.s_std) { | |
| ret = vpbe_dev->ops.s_std(vpbe_dev, std_id); | |
| if (ret) { | |
| v4l2_err(&vpbe_dev->v4l2_dev, | |
| "Failed to set standard for sub devices\n"); | |
| return -EINVAL; | |
| } | |
| } else { | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| /** | |
| * vpbe_display_g_std - Get the standard in the current encoder | |
| * | |
| * Get the standard in the current encoder. Return the status. 0 - success | |
| * -EINVAL on error | |
| */ | |
| static int vpbe_display_g_std(struct file *file, void *priv, | |
| v4l2_std_id *std_id) | |
| { | |
| struct vpbe_layer *layer = video_drvdata(file); | |
| struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev; | |
| v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_G_STD\n"); | |
| /* Get the standard from the current encoder */ | |
| if (vpbe_dev->current_timings.timings_type & VPBE_ENC_STD) { | |
| *std_id = vpbe_dev->current_timings.std_id; | |
| return 0; | |
| } | |
| return -EINVAL; | |
| } | |
| /** | |
| * vpbe_display_enum_output - enumerate outputs | |
| * | |
| * Enumerates the outputs available at the vpbe display | |
| * returns the status, -EINVAL if end of output list | |
| */ | |
| static int vpbe_display_enum_output(struct file *file, void *priv, | |
| struct v4l2_output *output) | |
| { | |
| struct vpbe_layer *layer = video_drvdata(file); | |
| struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev; | |
| int ret; | |
| v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_ENUM_OUTPUT\n"); | |
| /* Enumerate outputs */ | |
| if (NULL == vpbe_dev->ops.enum_outputs) | |
| return -EINVAL; | |
| ret = vpbe_dev->ops.enum_outputs(vpbe_dev, output); | |
| if (ret) { | |
| v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, | |
| "Failed to enumerate outputs\n"); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| /** | |
| * vpbe_display_s_output - Set output to | |
| * the output specified by the index | |
| */ | |
| static int vpbe_display_s_output(struct file *file, void *priv, | |
| unsigned int i) | |
| { | |
| struct vpbe_layer *layer = video_drvdata(file); | |
| struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev; | |
| int ret; | |
| v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_S_OUTPUT\n"); | |
| if (vb2_is_busy(&layer->buffer_queue)) | |
| return -EBUSY; | |
| if (NULL == vpbe_dev->ops.set_output) | |
| return -EINVAL; | |
| ret = vpbe_dev->ops.set_output(vpbe_dev, i); | |
| if (ret) { | |
| v4l2_err(&vpbe_dev->v4l2_dev, | |
| "Failed to set output for sub devices\n"); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| /** | |
| * vpbe_display_g_output - Get output from subdevice | |
| * for a given by the index | |
| */ | |
| static int vpbe_display_g_output(struct file *file, void *priv, | |
| unsigned int *i) | |
| { | |
| struct vpbe_layer *layer = video_drvdata(file); | |
| struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev; | |
| v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_G_OUTPUT\n"); | |
| /* Get the standard from the current encoder */ | |
| *i = vpbe_dev->current_out_index; | |
| return 0; | |
| } | |
| /** | |
| * vpbe_display_enum_dv_timings - Enumerate the dv timings | |
| * | |
| * enum the timings in the current encoder. Return the status. 0 - success | |
| * -EINVAL on error | |
| */ | |
| static int | |
| vpbe_display_enum_dv_timings(struct file *file, void *priv, | |
| struct v4l2_enum_dv_timings *timings) | |
| { | |
| struct vpbe_layer *layer = video_drvdata(file); | |
| struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev; | |
| int ret; | |
| v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_ENUM_DV_TIMINGS\n"); | |
| /* Enumerate outputs */ | |
| if (NULL == vpbe_dev->ops.enum_dv_timings) | |
| return -EINVAL; | |
| ret = vpbe_dev->ops.enum_dv_timings(vpbe_dev, timings); | |
| if (ret) { | |
| v4l2_err(&vpbe_dev->v4l2_dev, | |
| "Failed to enumerate dv timings info\n"); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| /** | |
| * vpbe_display_s_dv_timings - Set the dv timings | |
| * | |
| * Set the timings in the current encoder. Return the status. 0 - success | |
| * -EINVAL on error | |
| */ | |
| static int | |
| vpbe_display_s_dv_timings(struct file *file, void *priv, | |
| struct v4l2_dv_timings *timings) | |
| { | |
| struct vpbe_layer *layer = video_drvdata(file); | |
| struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev; | |
| int ret; | |
| v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_S_DV_TIMINGS\n"); | |
| if (vb2_is_busy(&layer->buffer_queue)) | |
| return -EBUSY; | |
| /* Set the given standard in the encoder */ | |
| if (!vpbe_dev->ops.s_dv_timings) | |
| return -EINVAL; | |
| ret = vpbe_dev->ops.s_dv_timings(vpbe_dev, timings); | |
| if (ret) { | |
| v4l2_err(&vpbe_dev->v4l2_dev, | |
| "Failed to set the dv timings info\n"); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| /** | |
| * vpbe_display_g_dv_timings - Set the dv timings | |
| * | |
| * Get the timings in the current encoder. Return the status. 0 - success | |
| * -EINVAL on error | |
| */ | |
| static int | |
| vpbe_display_g_dv_timings(struct file *file, void *priv, | |
| struct v4l2_dv_timings *dv_timings) | |
| { | |
| struct vpbe_layer *layer = video_drvdata(file); | |
| struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev; | |
| v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_G_DV_TIMINGS\n"); | |
| /* Get the given standard in the encoder */ | |
| if (vpbe_dev->current_timings.timings_type & | |
| VPBE_ENC_DV_TIMINGS) { | |
| *dv_timings = vpbe_dev->current_timings.dv_timings; | |
| } else { | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * vpbe_display_open() | |
| * It creates object of file handle structure and stores it in private_data | |
| * member of filepointer | |
| */ | |
| static int vpbe_display_open(struct file *file) | |
| { | |
| struct vpbe_layer *layer = video_drvdata(file); | |
| struct vpbe_display *disp_dev = layer->disp_dev; | |
| struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; | |
| struct osd_state *osd_device = disp_dev->osd_device; | |
| int err; | |
| /* creating context for file descriptor */ | |
| err = v4l2_fh_open(file); | |
| if (err) { | |
| v4l2_err(&vpbe_dev->v4l2_dev, "v4l2_fh_open failed\n"); | |
| return err; | |
| } | |
| /* leaving if layer is already initialized */ | |
| if (!v4l2_fh_is_singular_file(file)) | |
| return err; | |
| if (!layer->usrs) { | |
| if (mutex_lock_interruptible(&layer->opslock)) | |
| return -ERESTARTSYS; | |
| /* First claim the layer for this device */ | |
| err = osd_device->ops.request_layer(osd_device, | |
| layer->layer_info.id); | |
| mutex_unlock(&layer->opslock); | |
| if (err < 0) { | |
| /* Couldn't get layer */ | |
| v4l2_err(&vpbe_dev->v4l2_dev, | |
| "Display Manager failed to allocate layer\n"); | |
| v4l2_fh_release(file); | |
| return -EINVAL; | |
| } | |
| } | |
| /* Increment layer usrs counter */ | |
| layer->usrs++; | |
| v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, | |
| "vpbe display device opened successfully\n"); | |
| return 0; | |
| } | |
| /* | |
| * vpbe_display_release() | |
| * This function deletes buffer queue, frees the buffers and the davinci | |
| * display file * handle | |
| */ | |
| static int vpbe_display_release(struct file *file) | |
| { | |
| struct vpbe_layer *layer = video_drvdata(file); | |
| struct osd_layer_config *cfg = &layer->layer_info.config; | |
| struct vpbe_display *disp_dev = layer->disp_dev; | |
| struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; | |
| struct osd_state *osd_device = disp_dev->osd_device; | |
| v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_release\n"); | |
| mutex_lock(&layer->opslock); | |
| osd_device->ops.disable_layer(osd_device, | |
| layer->layer_info.id); | |
| /* Decrement layer usrs counter */ | |
| layer->usrs--; | |
| /* If this file handle has initialize encoder device, reset it */ | |
| if (!layer->usrs) { | |
| if (cfg->pixfmt == PIXFMT_NV12) { | |
| struct vpbe_layer *otherlayer; | |
| otherlayer = | |
| _vpbe_display_get_other_win_layer(disp_dev, layer); | |
| osd_device->ops.disable_layer(osd_device, | |
| otherlayer->layer_info.id); | |
| osd_device->ops.release_layer(osd_device, | |
| otherlayer->layer_info.id); | |
| } | |
| osd_device->ops.disable_layer(osd_device, | |
| layer->layer_info.id); | |
| osd_device->ops.release_layer(osd_device, | |
| layer->layer_info.id); | |
| } | |
| _vb2_fop_release(file, NULL); | |
| mutex_unlock(&layer->opslock); | |
| disp_dev->cbcr_ofst = 0; | |
| return 0; | |
| } | |
| /* vpbe capture ioctl operations */ | |
| static const struct v4l2_ioctl_ops vpbe_ioctl_ops = { | |
| .vidioc_querycap = vpbe_display_querycap, | |
| .vidioc_g_fmt_vid_out = vpbe_display_g_fmt, | |
| .vidioc_enum_fmt_vid_out = vpbe_display_enum_fmt, | |
| .vidioc_s_fmt_vid_out = vpbe_display_s_fmt, | |
| .vidioc_try_fmt_vid_out = vpbe_display_try_fmt, | |
| .vidioc_reqbufs = vb2_ioctl_reqbufs, | |
| .vidioc_create_bufs = vb2_ioctl_create_bufs, | |
| .vidioc_querybuf = vb2_ioctl_querybuf, | |
| .vidioc_qbuf = vb2_ioctl_qbuf, | |
| .vidioc_dqbuf = vb2_ioctl_dqbuf, | |
| .vidioc_streamon = vb2_ioctl_streamon, | |
| .vidioc_streamoff = vb2_ioctl_streamoff, | |
| .vidioc_expbuf = vb2_ioctl_expbuf, | |
| .vidioc_cropcap = vpbe_display_cropcap, | |
| .vidioc_g_selection = vpbe_display_g_selection, | |
| .vidioc_s_selection = vpbe_display_s_selection, | |
| .vidioc_s_std = vpbe_display_s_std, | |
| .vidioc_g_std = vpbe_display_g_std, | |
| .vidioc_enum_output = vpbe_display_enum_output, | |
| .vidioc_s_output = vpbe_display_s_output, | |
| .vidioc_g_output = vpbe_display_g_output, | |
| .vidioc_s_dv_timings = vpbe_display_s_dv_timings, | |
| .vidioc_g_dv_timings = vpbe_display_g_dv_timings, | |
| .vidioc_enum_dv_timings = vpbe_display_enum_dv_timings, | |
| }; | |
| static const struct v4l2_file_operations vpbe_fops = { | |
| .owner = THIS_MODULE, | |
| .open = vpbe_display_open, | |
| .release = vpbe_display_release, | |
| .unlocked_ioctl = video_ioctl2, | |
| .mmap = vb2_fop_mmap, | |
| .poll = vb2_fop_poll, | |
| }; | |
| static int vpbe_device_get(struct device *dev, void *data) | |
| { | |
| struct platform_device *pdev = to_platform_device(dev); | |
| struct vpbe_display *vpbe_disp = data; | |
| if (strcmp("vpbe_controller", pdev->name) == 0) | |
| vpbe_disp->vpbe_dev = platform_get_drvdata(pdev); | |
| if (strstr(pdev->name, "vpbe-osd") != NULL) | |
| vpbe_disp->osd_device = platform_get_drvdata(pdev); | |
| return 0; | |
| } | |
| static int init_vpbe_layer(int i, struct vpbe_display *disp_dev, | |
| struct platform_device *pdev) | |
| { | |
| struct vpbe_layer *vpbe_display_layer = NULL; | |
| struct video_device *vbd = NULL; | |
| /* Allocate memory for four plane display objects */ | |
| disp_dev->dev[i] = | |
| kzalloc(sizeof(struct vpbe_layer), GFP_KERNEL); | |
| /* If memory allocation fails, return error */ | |
| if (!disp_dev->dev[i]) { | |
| printk(KERN_ERR "ran out of memory\n"); | |
| return -ENOMEM; | |
| } | |
| spin_lock_init(&disp_dev->dev[i]->irqlock); | |
| mutex_init(&disp_dev->dev[i]->opslock); | |
| /* Get the pointer to the layer object */ | |
| vpbe_display_layer = disp_dev->dev[i]; | |
| vbd = &vpbe_display_layer->video_dev; | |
| /* Initialize field of video device */ | |
| vbd->release = video_device_release_empty; | |
| vbd->fops = &vpbe_fops; | |
| vbd->ioctl_ops = &vpbe_ioctl_ops; | |
| vbd->minor = -1; | |
| vbd->v4l2_dev = &disp_dev->vpbe_dev->v4l2_dev; | |
| vbd->lock = &vpbe_display_layer->opslock; | |
| vbd->vfl_dir = VFL_DIR_TX; | |
| if (disp_dev->vpbe_dev->current_timings.timings_type & | |
| VPBE_ENC_STD) | |
| vbd->tvnorms = (V4L2_STD_525_60 | V4L2_STD_625_50); | |
| snprintf(vbd->name, sizeof(vbd->name), | |
| "DaVinci_VPBE Display_DRIVER_V%d.%d.%d", | |
| (VPBE_DISPLAY_VERSION_CODE >> 16) & 0xff, | |
| (VPBE_DISPLAY_VERSION_CODE >> 8) & 0xff, | |
| (VPBE_DISPLAY_VERSION_CODE) & 0xff); | |
| vpbe_display_layer->device_id = i; | |
| vpbe_display_layer->layer_info.id = | |
| ((i == VPBE_DISPLAY_DEVICE_0) ? WIN_VID0 : WIN_VID1); | |
| return 0; | |
| } | |
| static int register_device(struct vpbe_layer *vpbe_display_layer, | |
| struct vpbe_display *disp_dev, | |
| struct platform_device *pdev) | |
| { | |
| int err; | |
| v4l2_info(&disp_dev->vpbe_dev->v4l2_dev, | |
| "Trying to register VPBE display device.\n"); | |
| v4l2_info(&disp_dev->vpbe_dev->v4l2_dev, | |
| "layer=%x,layer->video_dev=%x\n", | |
| (int)vpbe_display_layer, | |
| (int)&vpbe_display_layer->video_dev); | |
| vpbe_display_layer->video_dev.queue = &vpbe_display_layer->buffer_queue; | |
| err = video_register_device(&vpbe_display_layer->video_dev, | |
| VFL_TYPE_GRABBER, | |
| -1); | |
| if (err) | |
| return -ENODEV; | |
| vpbe_display_layer->disp_dev = disp_dev; | |
| /* set the driver data in platform device */ | |
| platform_set_drvdata(pdev, disp_dev); | |
| video_set_drvdata(&vpbe_display_layer->video_dev, | |
| vpbe_display_layer); | |
| return 0; | |
| } | |
| /* | |
| * vpbe_display_probe() | |
| * This function creates device entries by register itself to the V4L2 driver | |
| * and initializes fields of each layer objects | |
| */ | |
| static int vpbe_display_probe(struct platform_device *pdev) | |
| { | |
| struct vpbe_display *disp_dev; | |
| struct v4l2_device *v4l2_dev; | |
| struct resource *res = NULL; | |
| struct vb2_queue *q; | |
| int k; | |
| int i; | |
| int err; | |
| int irq; | |
| printk(KERN_DEBUG "vpbe_display_probe\n"); | |
| /* Allocate memory for vpbe_display */ | |
| disp_dev = devm_kzalloc(&pdev->dev, sizeof(struct vpbe_display), | |
| GFP_KERNEL); | |
| if (!disp_dev) | |
| return -ENOMEM; | |
| spin_lock_init(&disp_dev->dma_queue_lock); | |
| /* | |
| * Scan all the platform devices to find the vpbe | |
| * controller device and get the vpbe_dev object | |
| */ | |
| err = bus_for_each_dev(&platform_bus_type, NULL, disp_dev, | |
| vpbe_device_get); | |
| if (err < 0) | |
| return err; | |
| v4l2_dev = &disp_dev->vpbe_dev->v4l2_dev; | |
| /* Initialize the vpbe display controller */ | |
| if (NULL != disp_dev->vpbe_dev->ops.initialize) { | |
| err = disp_dev->vpbe_dev->ops.initialize(&pdev->dev, | |
| disp_dev->vpbe_dev); | |
| if (err) { | |
| v4l2_err(v4l2_dev, "Error initing vpbe\n"); | |
| err = -ENOMEM; | |
| goto probe_out; | |
| } | |
| } | |
| for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) { | |
| if (init_vpbe_layer(i, disp_dev, pdev)) { | |
| err = -ENODEV; | |
| goto probe_out; | |
| } | |
| } | |
| res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); | |
| if (!res) { | |
| v4l2_err(v4l2_dev, "Unable to get VENC interrupt resource\n"); | |
| err = -ENODEV; | |
| goto probe_out; | |
| } | |
| irq = res->start; | |
| err = devm_request_irq(&pdev->dev, irq, venc_isr, 0, | |
| VPBE_DISPLAY_DRIVER, disp_dev); | |
| if (err) { | |
| v4l2_err(v4l2_dev, "VPBE IRQ request failed\n"); | |
| goto probe_out; | |
| } | |
| for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) { | |
| /* initialize vb2 queue */ | |
| q = &disp_dev->dev[i]->buffer_queue; | |
| memset(q, 0, sizeof(*q)); | |
| q->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; | |
| q->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF; | |
| q->drv_priv = disp_dev->dev[i]; | |
| q->ops = &video_qops; | |
| q->mem_ops = &vb2_dma_contig_memops; | |
| q->buf_struct_size = sizeof(struct vpbe_disp_buffer); | |
| q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; | |
| q->min_buffers_needed = 1; | |
| q->lock = &disp_dev->dev[i]->opslock; | |
| q->dev = disp_dev->vpbe_dev->pdev; | |
| err = vb2_queue_init(q); | |
| if (err) { | |
| v4l2_err(v4l2_dev, "vb2_queue_init() failed\n"); | |
| goto probe_out; | |
| } | |
| INIT_LIST_HEAD(&disp_dev->dev[i]->dma_queue); | |
| if (register_device(disp_dev->dev[i], disp_dev, pdev)) { | |
| err = -ENODEV; | |
| goto probe_out; | |
| } | |
| } | |
| v4l2_dbg(1, debug, v4l2_dev, | |
| "Successfully completed the probing of vpbe v4l2 device\n"); | |
| return 0; | |
| probe_out: | |
| for (k = 0; k < VPBE_DISPLAY_MAX_DEVICES; k++) { | |
| /* Unregister video device */ | |
| if (disp_dev->dev[k] != NULL) { | |
| video_unregister_device(&disp_dev->dev[k]->video_dev); | |
| kfree(disp_dev->dev[k]); | |
| } | |
| } | |
| return err; | |
| } | |
| /* | |
| * vpbe_display_remove() | |
| * It un-register hardware layer from V4L2 driver | |
| */ | |
| static int vpbe_display_remove(struct platform_device *pdev) | |
| { | |
| struct vpbe_layer *vpbe_display_layer; | |
| struct vpbe_display *disp_dev = platform_get_drvdata(pdev); | |
| struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; | |
| int i; | |
| v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_remove\n"); | |
| /* deinitialize the vpbe display controller */ | |
| if (NULL != vpbe_dev->ops.deinitialize) | |
| vpbe_dev->ops.deinitialize(&pdev->dev, vpbe_dev); | |
| /* un-register device */ | |
| for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) { | |
| /* Get the pointer to the layer object */ | |
| vpbe_display_layer = disp_dev->dev[i]; | |
| /* Unregister video device */ | |
| video_unregister_device(&vpbe_display_layer->video_dev); | |
| } | |
| for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) { | |
| kfree(disp_dev->dev[i]); | |
| disp_dev->dev[i] = NULL; | |
| } | |
| return 0; | |
| } | |
| static struct platform_driver vpbe_display_driver = { | |
| .driver = { | |
| .name = VPBE_DISPLAY_DRIVER, | |
| .bus = &platform_bus_type, | |
| }, | |
| .probe = vpbe_display_probe, | |
| .remove = vpbe_display_remove, | |
| }; | |
| module_platform_driver(vpbe_display_driver); | |
| MODULE_DESCRIPTION("TI DM644x/DM355/DM365 VPBE Display controller"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_AUTHOR("Texas Instruments"); |