| /**************************************************************************** | |
| * | |
| * Filename: cpia2_usb.c | |
| * | |
| * Copyright 2001, STMicrolectronics, Inc. | |
| * Contact: steve.miller@st.com | |
| * | |
| * Description: | |
| * This is a USB driver for CPia2 based video cameras. | |
| * The infrastructure of this driver is based on the cpia usb driver by | |
| * Jochen Scharrlach and Johannes Erdfeldt. | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * Stripped of 2.4 stuff ready for main kernel submit by | |
| * Alan Cox <alan@lxorguk.ukuu.org.uk> | |
| ****************************************************************************/ | |
| #include <linux/kernel.h> | |
| #include <linux/slab.h> | |
| #include <linux/usb.h> | |
| #include <linux/module.h> | |
| #include "cpia2.h" | |
| static int frame_sizes[] = { | |
| 0, // USBIF_CMDONLY | |
| 0, // USBIF_BULK | |
| 128, // USBIF_ISO_1 | |
| 384, // USBIF_ISO_2 | |
| 640, // USBIF_ISO_3 | |
| 768, // USBIF_ISO_4 | |
| 896, // USBIF_ISO_5 | |
| 1023, // USBIF_ISO_6 | |
| }; | |
| #define FRAMES_PER_DESC 10 | |
| #define FRAME_SIZE_PER_DESC frame_sizes[cam->cur_alt] | |
| static void process_frame(struct camera_data *cam); | |
| static void cpia2_usb_complete(struct urb *urb); | |
| static int cpia2_usb_probe(struct usb_interface *intf, | |
| const struct usb_device_id *id); | |
| static void cpia2_usb_disconnect(struct usb_interface *intf); | |
| static int cpia2_usb_suspend(struct usb_interface *intf, pm_message_t message); | |
| static int cpia2_usb_resume(struct usb_interface *intf); | |
| static void free_sbufs(struct camera_data *cam); | |
| static void add_APPn(struct camera_data *cam); | |
| static void add_COM(struct camera_data *cam); | |
| static int submit_urbs(struct camera_data *cam); | |
| static int set_alternate(struct camera_data *cam, unsigned int alt); | |
| static int configure_transfer_mode(struct camera_data *cam, unsigned int alt); | |
| static const struct usb_device_id cpia2_id_table[] = { | |
| {USB_DEVICE(0x0553, 0x0100)}, | |
| {USB_DEVICE(0x0553, 0x0140)}, | |
| {USB_DEVICE(0x0553, 0x0151)}, /* STV0676 */ | |
| {} /* Terminating entry */ | |
| }; | |
| MODULE_DEVICE_TABLE(usb, cpia2_id_table); | |
| static struct usb_driver cpia2_driver = { | |
| .name = "cpia2", | |
| .probe = cpia2_usb_probe, | |
| .disconnect = cpia2_usb_disconnect, | |
| .suspend = cpia2_usb_suspend, | |
| .resume = cpia2_usb_resume, | |
| .reset_resume = cpia2_usb_resume, | |
| .id_table = cpia2_id_table | |
| }; | |
| /****************************************************************************** | |
| * | |
| * process_frame | |
| * | |
| *****************************************************************************/ | |
| static void process_frame(struct camera_data *cam) | |
| { | |
| static int frame_count; | |
| unsigned char *inbuff = cam->workbuff->data; | |
| DBG("Processing frame #%d, current:%d\n", | |
| cam->workbuff->num, cam->curbuff->num); | |
| if(cam->workbuff->length > cam->workbuff->max_length) | |
| cam->workbuff->max_length = cam->workbuff->length; | |
| if ((inbuff[0] == 0xFF) && (inbuff[1] == 0xD8)) { | |
| frame_count++; | |
| } else { | |
| cam->workbuff->status = FRAME_ERROR; | |
| DBG("Start of frame not found\n"); | |
| return; | |
| } | |
| /*** | |
| * Now the output buffer should have a JPEG image in it. | |
| ***/ | |
| if(!cam->first_image_seen) { | |
| /* Always skip the first image after streaming | |
| * starts. It is almost certainly corrupt. */ | |
| cam->first_image_seen = 1; | |
| cam->workbuff->status = FRAME_EMPTY; | |
| return; | |
| } | |
| if (cam->workbuff->length > 3) { | |
| if(cam->mmapped && | |
| cam->workbuff->length < cam->workbuff->max_length) { | |
| /* No junk in the buffers */ | |
| memset(cam->workbuff->data+cam->workbuff->length, | |
| 0, cam->workbuff->max_length- | |
| cam->workbuff->length); | |
| } | |
| cam->workbuff->max_length = cam->workbuff->length; | |
| cam->workbuff->status = FRAME_READY; | |
| if(!cam->mmapped && cam->num_frames > 2) { | |
| /* During normal reading, the most recent | |
| * frame will be read. If the current frame | |
| * hasn't started reading yet, it will never | |
| * be read, so mark it empty. If the buffer is | |
| * mmapped, or we have few buffers, we need to | |
| * wait for the user to free the buffer. | |
| * | |
| * NOTE: This is not entirely foolproof with 3 | |
| * buffers, but it would take an EXTREMELY | |
| * overloaded system to cause problems (possible | |
| * image data corruption). Basically, it would | |
| * need to take more time to execute cpia2_read | |
| * than it would for the camera to send | |
| * cam->num_frames-2 frames before problems | |
| * could occur. | |
| */ | |
| cam->curbuff->status = FRAME_EMPTY; | |
| } | |
| cam->curbuff = cam->workbuff; | |
| cam->workbuff = cam->workbuff->next; | |
| DBG("Changed buffers, work:%d, current:%d\n", | |
| cam->workbuff->num, cam->curbuff->num); | |
| return; | |
| } else { | |
| DBG("Not enough data for an image.\n"); | |
| } | |
| cam->workbuff->status = FRAME_ERROR; | |
| return; | |
| } | |
| /****************************************************************************** | |
| * | |
| * add_APPn | |
| * | |
| * Adds a user specified APPn record | |
| *****************************************************************************/ | |
| static void add_APPn(struct camera_data *cam) | |
| { | |
| if(cam->APP_len > 0) { | |
| cam->workbuff->data[cam->workbuff->length++] = 0xFF; | |
| cam->workbuff->data[cam->workbuff->length++] = 0xE0+cam->APPn; | |
| cam->workbuff->data[cam->workbuff->length++] = 0; | |
| cam->workbuff->data[cam->workbuff->length++] = cam->APP_len+2; | |
| memcpy(cam->workbuff->data+cam->workbuff->length, | |
| cam->APP_data, cam->APP_len); | |
| cam->workbuff->length += cam->APP_len; | |
| } | |
| } | |
| /****************************************************************************** | |
| * | |
| * add_COM | |
| * | |
| * Adds a user specified COM record | |
| *****************************************************************************/ | |
| static void add_COM(struct camera_data *cam) | |
| { | |
| if(cam->COM_len > 0) { | |
| cam->workbuff->data[cam->workbuff->length++] = 0xFF; | |
| cam->workbuff->data[cam->workbuff->length++] = 0xFE; | |
| cam->workbuff->data[cam->workbuff->length++] = 0; | |
| cam->workbuff->data[cam->workbuff->length++] = cam->COM_len+2; | |
| memcpy(cam->workbuff->data+cam->workbuff->length, | |
| cam->COM_data, cam->COM_len); | |
| cam->workbuff->length += cam->COM_len; | |
| } | |
| } | |
| /****************************************************************************** | |
| * | |
| * cpia2_usb_complete | |
| * | |
| * callback when incoming packet is received | |
| *****************************************************************************/ | |
| static void cpia2_usb_complete(struct urb *urb) | |
| { | |
| int i; | |
| unsigned char *cdata; | |
| static bool frame_ready = false; | |
| struct camera_data *cam = (struct camera_data *) urb->context; | |
| if (urb->status!=0) { | |
| if (!(urb->status == -ENOENT || | |
| urb->status == -ECONNRESET || | |
| urb->status == -ESHUTDOWN)) | |
| { | |
| DBG("urb->status = %d!\n", urb->status); | |
| } | |
| DBG("Stopping streaming\n"); | |
| return; | |
| } | |
| if (!cam->streaming || !video_is_registered(&cam->vdev)) { | |
| LOG("Will now stop the streaming: streaming = %d, present=%d\n", | |
| cam->streaming, video_is_registered(&cam->vdev)); | |
| return; | |
| } | |
| /*** | |
| * Packet collater | |
| ***/ | |
| //DBG("Collating %d packets\n", urb->number_of_packets); | |
| for (i = 0; i < urb->number_of_packets; i++) { | |
| u16 checksum, iso_checksum; | |
| int j; | |
| int n = urb->iso_frame_desc[i].actual_length; | |
| int st = urb->iso_frame_desc[i].status; | |
| if(cam->workbuff->status == FRAME_READY) { | |
| struct framebuf *ptr; | |
| /* Try to find an available buffer */ | |
| DBG("workbuff full, searching\n"); | |
| for (ptr = cam->workbuff->next; | |
| ptr != cam->workbuff; | |
| ptr = ptr->next) | |
| { | |
| if (ptr->status == FRAME_EMPTY) { | |
| ptr->status = FRAME_READING; | |
| ptr->length = 0; | |
| break; | |
| } | |
| } | |
| if (ptr == cam->workbuff) | |
| break; /* No READING or EMPTY buffers left */ | |
| cam->workbuff = ptr; | |
| } | |
| if (cam->workbuff->status == FRAME_EMPTY || | |
| cam->workbuff->status == FRAME_ERROR) { | |
| cam->workbuff->status = FRAME_READING; | |
| cam->workbuff->length = 0; | |
| } | |
| //DBG(" Packet %d length = %d, status = %d\n", i, n, st); | |
| cdata = urb->transfer_buffer + urb->iso_frame_desc[i].offset; | |
| if (st) { | |
| LOG("cpia2 data error: [%d] len=%d, status = %d\n", | |
| i, n, st); | |
| if(!ALLOW_CORRUPT) | |
| cam->workbuff->status = FRAME_ERROR; | |
| continue; | |
| } | |
| if(n<=2) | |
| continue; | |
| checksum = 0; | |
| for(j=0; j<n-2; ++j) | |
| checksum += cdata[j]; | |
| iso_checksum = cdata[j] + cdata[j+1]*256; | |
| if(checksum != iso_checksum) { | |
| LOG("checksum mismatch: [%d] len=%d, calculated = %x, checksum = %x\n", | |
| i, n, (int)checksum, (int)iso_checksum); | |
| if(!ALLOW_CORRUPT) { | |
| cam->workbuff->status = FRAME_ERROR; | |
| continue; | |
| } | |
| } | |
| n -= 2; | |
| if(cam->workbuff->status != FRAME_READING) { | |
| if((0xFF == cdata[0] && 0xD8 == cdata[1]) || | |
| (0xD8 == cdata[0] && 0xFF == cdata[1] && | |
| 0 != cdata[2])) { | |
| /* frame is skipped, but increment total | |
| * frame count anyway */ | |
| cam->frame_count++; | |
| } | |
| DBG("workbuff not reading, status=%d\n", | |
| cam->workbuff->status); | |
| continue; | |
| } | |
| if (cam->frame_size < cam->workbuff->length + n) { | |
| ERR("buffer overflow! length: %d, n: %d\n", | |
| cam->workbuff->length, n); | |
| cam->workbuff->status = FRAME_ERROR; | |
| if(cam->workbuff->length > cam->workbuff->max_length) | |
| cam->workbuff->max_length = | |
| cam->workbuff->length; | |
| continue; | |
| } | |
| if (cam->workbuff->length == 0) { | |
| int data_offset; | |
| if ((0xD8 == cdata[0]) && (0xFF == cdata[1])) { | |
| data_offset = 1; | |
| } else if((0xFF == cdata[0]) && (0xD8 == cdata[1]) | |
| && (0xFF == cdata[2])) { | |
| data_offset = 2; | |
| } else { | |
| DBG("Ignoring packet, not beginning!\n"); | |
| continue; | |
| } | |
| DBG("Start of frame pattern found\n"); | |
| v4l2_get_timestamp(&cam->workbuff->timestamp); | |
| cam->workbuff->seq = cam->frame_count++; | |
| cam->workbuff->data[0] = 0xFF; | |
| cam->workbuff->data[1] = 0xD8; | |
| cam->workbuff->length = 2; | |
| add_APPn(cam); | |
| add_COM(cam); | |
| memcpy(cam->workbuff->data+cam->workbuff->length, | |
| cdata+data_offset, n-data_offset); | |
| cam->workbuff->length += n-data_offset; | |
| } else if (cam->workbuff->length > 0) { | |
| memcpy(cam->workbuff->data + cam->workbuff->length, | |
| cdata, n); | |
| cam->workbuff->length += n; | |
| } | |
| if ((cam->workbuff->length >= 3) && | |
| (cam->workbuff->data[cam->workbuff->length - 3] == 0xFF) && | |
| (cam->workbuff->data[cam->workbuff->length - 2] == 0xD9) && | |
| (cam->workbuff->data[cam->workbuff->length - 1] == 0xFF)) { | |
| frame_ready = true; | |
| cam->workbuff->data[cam->workbuff->length - 1] = 0; | |
| cam->workbuff->length -= 1; | |
| } else if ((cam->workbuff->length >= 2) && | |
| (cam->workbuff->data[cam->workbuff->length - 2] == 0xFF) && | |
| (cam->workbuff->data[cam->workbuff->length - 1] == 0xD9)) { | |
| frame_ready = true; | |
| } | |
| if (frame_ready) { | |
| DBG("Workbuff image size = %d\n",cam->workbuff->length); | |
| process_frame(cam); | |
| frame_ready = false; | |
| if (waitqueue_active(&cam->wq_stream)) | |
| wake_up_interruptible(&cam->wq_stream); | |
| } | |
| } | |
| if(cam->streaming) { | |
| /* resubmit */ | |
| urb->dev = cam->dev; | |
| if ((i = usb_submit_urb(urb, GFP_ATOMIC)) != 0) | |
| ERR("%s: usb_submit_urb ret %d!\n", __func__, i); | |
| } | |
| } | |
| /****************************************************************************** | |
| * | |
| * configure_transfer_mode | |
| * | |
| *****************************************************************************/ | |
| static int configure_transfer_mode(struct camera_data *cam, unsigned int alt) | |
| { | |
| static unsigned char iso_regs[8][4] = { | |
| {0x00, 0x00, 0x00, 0x00}, | |
| {0x00, 0x00, 0x00, 0x00}, | |
| {0xB9, 0x00, 0x00, 0x7E}, | |
| {0xB9, 0x00, 0x01, 0x7E}, | |
| {0xB9, 0x00, 0x02, 0x7E}, | |
| {0xB9, 0x00, 0x02, 0xFE}, | |
| {0xB9, 0x00, 0x03, 0x7E}, | |
| {0xB9, 0x00, 0x03, 0xFD} | |
| }; | |
| struct cpia2_command cmd; | |
| unsigned char reg; | |
| if (!video_is_registered(&cam->vdev)) | |
| return -ENODEV; | |
| /*** | |
| * Write the isoc registers according to the alternate selected | |
| ***/ | |
| cmd.direction = TRANSFER_WRITE; | |
| cmd.buffer.block_data[0] = iso_regs[alt][0]; | |
| cmd.buffer.block_data[1] = iso_regs[alt][1]; | |
| cmd.buffer.block_data[2] = iso_regs[alt][2]; | |
| cmd.buffer.block_data[3] = iso_regs[alt][3]; | |
| cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VC; | |
| cmd.start = CPIA2_VC_USB_ISOLIM; | |
| cmd.reg_count = 4; | |
| cpia2_send_command(cam, &cmd); | |
| /*** | |
| * Enable relevant streams before starting polling. | |
| * First read USB Stream Config Register. | |
| ***/ | |
| cmd.direction = TRANSFER_READ; | |
| cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VC; | |
| cmd.start = CPIA2_VC_USB_STRM; | |
| cmd.reg_count = 1; | |
| cpia2_send_command(cam, &cmd); | |
| reg = cmd.buffer.block_data[0]; | |
| /* Clear iso, bulk, and int */ | |
| reg &= ~(CPIA2_VC_USB_STRM_BLK_ENABLE | | |
| CPIA2_VC_USB_STRM_ISO_ENABLE | | |
| CPIA2_VC_USB_STRM_INT_ENABLE); | |
| if (alt == USBIF_BULK) { | |
| DBG("Enabling bulk xfer\n"); | |
| reg |= CPIA2_VC_USB_STRM_BLK_ENABLE; /* Enable Bulk */ | |
| cam->xfer_mode = XFER_BULK; | |
| } else if (alt >= USBIF_ISO_1) { | |
| DBG("Enabling ISOC xfer\n"); | |
| reg |= CPIA2_VC_USB_STRM_ISO_ENABLE; | |
| cam->xfer_mode = XFER_ISOC; | |
| } | |
| cmd.buffer.block_data[0] = reg; | |
| cmd.direction = TRANSFER_WRITE; | |
| cmd.start = CPIA2_VC_USB_STRM; | |
| cmd.reg_count = 1; | |
| cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VC; | |
| cpia2_send_command(cam, &cmd); | |
| return 0; | |
| } | |
| /****************************************************************************** | |
| * | |
| * cpia2_usb_change_streaming_alternate | |
| * | |
| *****************************************************************************/ | |
| int cpia2_usb_change_streaming_alternate(struct camera_data *cam, | |
| unsigned int alt) | |
| { | |
| int ret = 0; | |
| if(alt < USBIF_ISO_1 || alt > USBIF_ISO_6) | |
| return -EINVAL; | |
| if(alt == cam->params.camera_state.stream_mode) | |
| return 0; | |
| cpia2_usb_stream_pause(cam); | |
| configure_transfer_mode(cam, alt); | |
| cam->params.camera_state.stream_mode = alt; | |
| /* Reset the camera to prevent image quality degradation */ | |
| cpia2_reset_camera(cam); | |
| cpia2_usb_stream_resume(cam); | |
| return ret; | |
| } | |
| /****************************************************************************** | |
| * | |
| * set_alternate | |
| * | |
| *****************************************************************************/ | |
| static int set_alternate(struct camera_data *cam, unsigned int alt) | |
| { | |
| int ret = 0; | |
| if(alt == cam->cur_alt) | |
| return 0; | |
| if (cam->cur_alt != USBIF_CMDONLY) { | |
| DBG("Changing from alt %d to %d\n", cam->cur_alt, USBIF_CMDONLY); | |
| ret = usb_set_interface(cam->dev, cam->iface, USBIF_CMDONLY); | |
| if (ret != 0) | |
| return ret; | |
| } | |
| if (alt != USBIF_CMDONLY) { | |
| DBG("Changing from alt %d to %d\n", USBIF_CMDONLY, alt); | |
| ret = usb_set_interface(cam->dev, cam->iface, alt); | |
| if (ret != 0) | |
| return ret; | |
| } | |
| cam->old_alt = cam->cur_alt; | |
| cam->cur_alt = alt; | |
| return ret; | |
| } | |
| /****************************************************************************** | |
| * | |
| * free_sbufs | |
| * | |
| * Free all cam->sbuf[]. All non-NULL .data and .urb members that are non-NULL | |
| * are assumed to be allocated. Non-NULL .urb members are also assumed to be | |
| * submitted (and must therefore be killed before they are freed). | |
| *****************************************************************************/ | |
| static void free_sbufs(struct camera_data *cam) | |
| { | |
| int i; | |
| for (i = 0; i < NUM_SBUF; i++) { | |
| if(cam->sbuf[i].urb) { | |
| usb_kill_urb(cam->sbuf[i].urb); | |
| usb_free_urb(cam->sbuf[i].urb); | |
| cam->sbuf[i].urb = NULL; | |
| } | |
| if(cam->sbuf[i].data) { | |
| kfree(cam->sbuf[i].data); | |
| cam->sbuf[i].data = NULL; | |
| } | |
| } | |
| } | |
| /******* | |
| * Convenience functions | |
| *******/ | |
| /**************************************************************************** | |
| * | |
| * write_packet | |
| * | |
| ***************************************************************************/ | |
| static int write_packet(struct usb_device *udev, | |
| u8 request, u8 * registers, u16 start, size_t size) | |
| { | |
| unsigned char *buf; | |
| int ret; | |
| if (!registers || size <= 0) | |
| return -EINVAL; | |
| buf = kmemdup(registers, size, GFP_KERNEL); | |
| if (!buf) | |
| return -ENOMEM; | |
| ret = usb_control_msg(udev, | |
| usb_sndctrlpipe(udev, 0), | |
| request, | |
| USB_TYPE_VENDOR | USB_RECIP_DEVICE, | |
| start, /* value */ | |
| 0, /* index */ | |
| buf, /* buffer */ | |
| size, | |
| HZ); | |
| kfree(buf); | |
| return ret; | |
| } | |
| /**************************************************************************** | |
| * | |
| * read_packet | |
| * | |
| ***************************************************************************/ | |
| static int read_packet(struct usb_device *udev, | |
| u8 request, u8 * registers, u16 start, size_t size) | |
| { | |
| unsigned char *buf; | |
| int ret; | |
| if (!registers || size <= 0) | |
| return -EINVAL; | |
| buf = kmalloc(size, GFP_KERNEL); | |
| if (!buf) | |
| return -ENOMEM; | |
| ret = usb_control_msg(udev, | |
| usb_rcvctrlpipe(udev, 0), | |
| request, | |
| USB_DIR_IN|USB_TYPE_VENDOR|USB_RECIP_DEVICE, | |
| start, /* value */ | |
| 0, /* index */ | |
| buf, /* buffer */ | |
| size, | |
| HZ); | |
| if (ret >= 0) | |
| memcpy(registers, buf, size); | |
| kfree(buf); | |
| return ret; | |
| } | |
| /****************************************************************************** | |
| * | |
| * cpia2_usb_transfer_cmd | |
| * | |
| *****************************************************************************/ | |
| int cpia2_usb_transfer_cmd(struct camera_data *cam, | |
| void *registers, | |
| u8 request, u8 start, u8 count, u8 direction) | |
| { | |
| int err = 0; | |
| struct usb_device *udev = cam->dev; | |
| if (!udev) { | |
| ERR("%s: Internal driver error: udev is NULL\n", __func__); | |
| return -EINVAL; | |
| } | |
| if (!registers) { | |
| ERR("%s: Internal driver error: register array is NULL\n", __func__); | |
| return -EINVAL; | |
| } | |
| if (direction == TRANSFER_READ) { | |
| err = read_packet(udev, request, (u8 *)registers, start, count); | |
| if (err > 0) | |
| err = 0; | |
| } else if (direction == TRANSFER_WRITE) { | |
| err =write_packet(udev, request, (u8 *)registers, start, count); | |
| if (err < 0) { | |
| LOG("Control message failed, err val = %d\n", err); | |
| LOG("Message: request = 0x%0X, start = 0x%0X\n", | |
| request, start); | |
| LOG("Message: count = %d, register[0] = 0x%0X\n", | |
| count, ((unsigned char *) registers)[0]); | |
| } else | |
| err=0; | |
| } else { | |
| LOG("Unexpected first byte of direction: %d\n", | |
| direction); | |
| return -EINVAL; | |
| } | |
| if(err != 0) | |
| LOG("Unexpected error: %d\n", err); | |
| return err; | |
| } | |
| /****************************************************************************** | |
| * | |
| * submit_urbs | |
| * | |
| *****************************************************************************/ | |
| static int submit_urbs(struct camera_data *cam) | |
| { | |
| struct urb *urb; | |
| int fx, err, i, j; | |
| for(i=0; i<NUM_SBUF; ++i) { | |
| if (cam->sbuf[i].data) | |
| continue; | |
| cam->sbuf[i].data = | |
| kmalloc(FRAMES_PER_DESC * FRAME_SIZE_PER_DESC, GFP_KERNEL); | |
| if (!cam->sbuf[i].data) { | |
| while (--i >= 0) { | |
| kfree(cam->sbuf[i].data); | |
| cam->sbuf[i].data = NULL; | |
| } | |
| return -ENOMEM; | |
| } | |
| } | |
| /* We double buffer the Isoc lists, and also know the polling | |
| * interval is every frame (1 == (1 << (bInterval -1))). | |
| */ | |
| for(i=0; i<NUM_SBUF; ++i) { | |
| if(cam->sbuf[i].urb) { | |
| continue; | |
| } | |
| urb = usb_alloc_urb(FRAMES_PER_DESC, GFP_KERNEL); | |
| if (!urb) { | |
| for (j = 0; j < i; j++) | |
| usb_free_urb(cam->sbuf[j].urb); | |
| return -ENOMEM; | |
| } | |
| cam->sbuf[i].urb = urb; | |
| urb->dev = cam->dev; | |
| urb->context = cam; | |
| urb->pipe = usb_rcvisocpipe(cam->dev, 1 /*ISOC endpoint*/); | |
| urb->transfer_flags = URB_ISO_ASAP; | |
| urb->transfer_buffer = cam->sbuf[i].data; | |
| urb->complete = cpia2_usb_complete; | |
| urb->number_of_packets = FRAMES_PER_DESC; | |
| urb->interval = 1; | |
| urb->transfer_buffer_length = | |
| FRAME_SIZE_PER_DESC * FRAMES_PER_DESC; | |
| for (fx = 0; fx < FRAMES_PER_DESC; fx++) { | |
| urb->iso_frame_desc[fx].offset = | |
| FRAME_SIZE_PER_DESC * fx; | |
| urb->iso_frame_desc[fx].length = FRAME_SIZE_PER_DESC; | |
| } | |
| } | |
| /* Queue the ISO urbs, and resubmit in the completion handler */ | |
| for(i=0; i<NUM_SBUF; ++i) { | |
| err = usb_submit_urb(cam->sbuf[i].urb, GFP_KERNEL); | |
| if (err) { | |
| ERR("usb_submit_urb[%d]() = %d\n", i, err); | |
| return err; | |
| } | |
| } | |
| return 0; | |
| } | |
| /****************************************************************************** | |
| * | |
| * cpia2_usb_stream_start | |
| * | |
| *****************************************************************************/ | |
| int cpia2_usb_stream_start(struct camera_data *cam, unsigned int alternate) | |
| { | |
| int ret; | |
| int old_alt; | |
| if(cam->streaming) | |
| return 0; | |
| if (cam->flush) { | |
| int i; | |
| DBG("Flushing buffers\n"); | |
| for(i=0; i<cam->num_frames; ++i) { | |
| cam->buffers[i].status = FRAME_EMPTY; | |
| cam->buffers[i].length = 0; | |
| } | |
| cam->curbuff = &cam->buffers[0]; | |
| cam->workbuff = cam->curbuff->next; | |
| cam->flush = false; | |
| } | |
| old_alt = cam->params.camera_state.stream_mode; | |
| cam->params.camera_state.stream_mode = 0; | |
| ret = cpia2_usb_change_streaming_alternate(cam, alternate); | |
| if (ret < 0) { | |
| int ret2; | |
| ERR("cpia2_usb_change_streaming_alternate() = %d!\n", ret); | |
| cam->params.camera_state.stream_mode = old_alt; | |
| ret2 = set_alternate(cam, USBIF_CMDONLY); | |
| if (ret2 < 0) { | |
| ERR("cpia2_usb_change_streaming_alternate(%d) =%d has already failed. Then tried to call set_alternate(USBIF_CMDONLY) = %d.\n", | |
| alternate, ret, ret2); | |
| } | |
| } else { | |
| cam->frame_count = 0; | |
| cam->streaming = 1; | |
| ret = cpia2_usb_stream_resume(cam); | |
| } | |
| return ret; | |
| } | |
| /****************************************************************************** | |
| * | |
| * cpia2_usb_stream_pause | |
| * | |
| *****************************************************************************/ | |
| int cpia2_usb_stream_pause(struct camera_data *cam) | |
| { | |
| int ret = 0; | |
| if(cam->streaming) { | |
| free_sbufs(cam); | |
| ret = set_alternate(cam, USBIF_CMDONLY); | |
| } | |
| return ret; | |
| } | |
| /****************************************************************************** | |
| * | |
| * cpia2_usb_stream_resume | |
| * | |
| *****************************************************************************/ | |
| int cpia2_usb_stream_resume(struct camera_data *cam) | |
| { | |
| int ret = 0; | |
| if(cam->streaming) { | |
| cam->first_image_seen = 0; | |
| ret = set_alternate(cam, cam->params.camera_state.stream_mode); | |
| if(ret == 0) { | |
| /* for some reason the user effects need to be set | |
| again when starting streaming. */ | |
| cpia2_do_command(cam, CPIA2_CMD_SET_USER_EFFECTS, TRANSFER_WRITE, | |
| cam->params.vp_params.user_effects); | |
| ret = submit_urbs(cam); | |
| } | |
| } | |
| return ret; | |
| } | |
| /****************************************************************************** | |
| * | |
| * cpia2_usb_stream_stop | |
| * | |
| *****************************************************************************/ | |
| int cpia2_usb_stream_stop(struct camera_data *cam) | |
| { | |
| int ret; | |
| ret = cpia2_usb_stream_pause(cam); | |
| cam->streaming = 0; | |
| configure_transfer_mode(cam, 0); | |
| return ret; | |
| } | |
| /****************************************************************************** | |
| * | |
| * cpia2_usb_probe | |
| * | |
| * Probe and initialize. | |
| *****************************************************************************/ | |
| static int cpia2_usb_probe(struct usb_interface *intf, | |
| const struct usb_device_id *id) | |
| { | |
| struct usb_device *udev = interface_to_usbdev(intf); | |
| struct usb_interface_descriptor *interface; | |
| struct camera_data *cam; | |
| int ret; | |
| /* A multi-config CPiA2 camera? */ | |
| if (udev->descriptor.bNumConfigurations != 1) | |
| return -ENODEV; | |
| interface = &intf->cur_altsetting->desc; | |
| /* If we get to this point, we found a CPiA2 camera */ | |
| LOG("CPiA2 USB camera found\n"); | |
| cam = cpia2_init_camera_struct(intf); | |
| if (cam == NULL) | |
| return -ENOMEM; | |
| cam->dev = udev; | |
| cam->iface = interface->bInterfaceNumber; | |
| ret = set_alternate(cam, USBIF_CMDONLY); | |
| if (ret < 0) { | |
| ERR("%s: usb_set_interface error (ret = %d)\n", __func__, ret); | |
| kfree(cam); | |
| return ret; | |
| } | |
| if((ret = cpia2_init_camera(cam)) < 0) { | |
| ERR("%s: failed to initialize cpia2 camera (ret = %d)\n", __func__, ret); | |
| kfree(cam); | |
| return ret; | |
| } | |
| LOG(" CPiA Version: %d.%02d (%d.%d)\n", | |
| cam->params.version.firmware_revision_hi, | |
| cam->params.version.firmware_revision_lo, | |
| cam->params.version.asic_id, | |
| cam->params.version.asic_rev); | |
| LOG(" CPiA PnP-ID: %04x:%04x:%04x\n", | |
| cam->params.pnp_id.vendor, | |
| cam->params.pnp_id.product, | |
| cam->params.pnp_id.device_revision); | |
| LOG(" SensorID: %d.(version %d)\n", | |
| cam->params.version.sensor_flags, | |
| cam->params.version.sensor_rev); | |
| usb_set_intfdata(intf, cam); | |
| ret = cpia2_register_camera(cam); | |
| if (ret < 0) { | |
| ERR("%s: Failed to register cpia2 camera (ret = %d)\n", __func__, ret); | |
| kfree(cam); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| /****************************************************************************** | |
| * | |
| * cpia2_disconnect | |
| * | |
| *****************************************************************************/ | |
| static void cpia2_usb_disconnect(struct usb_interface *intf) | |
| { | |
| struct camera_data *cam = usb_get_intfdata(intf); | |
| usb_set_intfdata(intf, NULL); | |
| DBG("Stopping stream\n"); | |
| cpia2_usb_stream_stop(cam); | |
| mutex_lock(&cam->v4l2_lock); | |
| DBG("Unregistering camera\n"); | |
| cpia2_unregister_camera(cam); | |
| v4l2_device_disconnect(&cam->v4l2_dev); | |
| mutex_unlock(&cam->v4l2_lock); | |
| v4l2_device_put(&cam->v4l2_dev); | |
| if(cam->buffers) { | |
| DBG("Wakeup waiting processes\n"); | |
| cam->curbuff->status = FRAME_READY; | |
| cam->curbuff->length = 0; | |
| wake_up_interruptible(&cam->wq_stream); | |
| } | |
| DBG("Releasing interface\n"); | |
| usb_driver_release_interface(&cpia2_driver, intf); | |
| LOG("CPiA2 camera disconnected.\n"); | |
| } | |
| static int cpia2_usb_suspend(struct usb_interface *intf, pm_message_t message) | |
| { | |
| struct camera_data *cam = usb_get_intfdata(intf); | |
| mutex_lock(&cam->v4l2_lock); | |
| if (cam->streaming) { | |
| cpia2_usb_stream_stop(cam); | |
| cam->streaming = 1; | |
| } | |
| mutex_unlock(&cam->v4l2_lock); | |
| dev_info(&intf->dev, "going into suspend..\n"); | |
| return 0; | |
| } | |
| /* Resume device - start device. */ | |
| static int cpia2_usb_resume(struct usb_interface *intf) | |
| { | |
| struct camera_data *cam = usb_get_intfdata(intf); | |
| mutex_lock(&cam->v4l2_lock); | |
| v4l2_ctrl_handler_setup(&cam->hdl); | |
| if (cam->streaming) { | |
| cam->streaming = 0; | |
| cpia2_usb_stream_start(cam, | |
| cam->params.camera_state.stream_mode); | |
| } | |
| mutex_unlock(&cam->v4l2_lock); | |
| dev_info(&intf->dev, "coming out of suspend..\n"); | |
| return 0; | |
| } | |
| /****************************************************************************** | |
| * | |
| * usb_cpia2_init | |
| * | |
| *****************************************************************************/ | |
| int cpia2_usb_init(void) | |
| { | |
| return usb_register(&cpia2_driver); | |
| } | |
| /****************************************************************************** | |
| * | |
| * usb_cpia_cleanup | |
| * | |
| *****************************************************************************/ | |
| void cpia2_usb_cleanup(void) | |
| { | |
| schedule_timeout(2 * HZ); | |
| usb_deregister(&cpia2_driver); | |
| } |