| /* | |
| * mchp23k256.c | |
| * | |
| * Driver for Microchip 23k256 SPI RAM chips | |
| * | |
| * Copyright © 2016 Andrew Lunn <andrew@lunn.ch> | |
| * | |
| * This code is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| * | |
| */ | |
| #include <linux/device.h> | |
| #include <linux/module.h> | |
| #include <linux/mtd/mtd.h> | |
| #include <linux/mtd/partitions.h> | |
| #include <linux/mutex.h> | |
| #include <linux/sched.h> | |
| #include <linux/sizes.h> | |
| #include <linux/spi/flash.h> | |
| #include <linux/spi/spi.h> | |
| #include <linux/of_device.h> | |
| #define MAX_CMD_SIZE 4 | |
| struct mchp23_caps { | |
| u8 addr_width; | |
| unsigned int size; | |
| }; | |
| struct mchp23k256_flash { | |
| struct spi_device *spi; | |
| struct mutex lock; | |
| struct mtd_info mtd; | |
| const struct mchp23_caps *caps; | |
| }; | |
| #define MCHP23K256_CMD_WRITE_STATUS 0x01 | |
| #define MCHP23K256_CMD_WRITE 0x02 | |
| #define MCHP23K256_CMD_READ 0x03 | |
| #define MCHP23K256_MODE_SEQ BIT(6) | |
| #define to_mchp23k256_flash(x) container_of(x, struct mchp23k256_flash, mtd) | |
| static void mchp23k256_addr2cmd(struct mchp23k256_flash *flash, | |
| unsigned int addr, u8 *cmd) | |
| { | |
| int i; | |
| /* | |
| * Address is sent in big endian (MSB first) and we skip | |
| * the first entry of the cmd array which contains the cmd | |
| * opcode. | |
| */ | |
| for (i = flash->caps->addr_width; i > 0; i--, addr >>= 8) | |
| cmd[i] = addr; | |
| } | |
| static int mchp23k256_cmdsz(struct mchp23k256_flash *flash) | |
| { | |
| return 1 + flash->caps->addr_width; | |
| } | |
| static int mchp23k256_write(struct mtd_info *mtd, loff_t to, size_t len, | |
| size_t *retlen, const unsigned char *buf) | |
| { | |
| struct mchp23k256_flash *flash = to_mchp23k256_flash(mtd); | |
| struct spi_transfer transfer[2] = {}; | |
| struct spi_message message; | |
| unsigned char command[MAX_CMD_SIZE]; | |
| spi_message_init(&message); | |
| command[0] = MCHP23K256_CMD_WRITE; | |
| mchp23k256_addr2cmd(flash, to, command); | |
| transfer[0].tx_buf = command; | |
| transfer[0].len = mchp23k256_cmdsz(flash); | |
| spi_message_add_tail(&transfer[0], &message); | |
| transfer[1].tx_buf = buf; | |
| transfer[1].len = len; | |
| spi_message_add_tail(&transfer[1], &message); | |
| mutex_lock(&flash->lock); | |
| spi_sync(flash->spi, &message); | |
| if (retlen && message.actual_length > sizeof(command)) | |
| *retlen += message.actual_length - sizeof(command); | |
| mutex_unlock(&flash->lock); | |
| return 0; | |
| } | |
| static int mchp23k256_read(struct mtd_info *mtd, loff_t from, size_t len, | |
| size_t *retlen, unsigned char *buf) | |
| { | |
| struct mchp23k256_flash *flash = to_mchp23k256_flash(mtd); | |
| struct spi_transfer transfer[2] = {}; | |
| struct spi_message message; | |
| unsigned char command[MAX_CMD_SIZE]; | |
| spi_message_init(&message); | |
| memset(&transfer, 0, sizeof(transfer)); | |
| command[0] = MCHP23K256_CMD_READ; | |
| mchp23k256_addr2cmd(flash, from, command); | |
| transfer[0].tx_buf = command; | |
| transfer[0].len = mchp23k256_cmdsz(flash); | |
| spi_message_add_tail(&transfer[0], &message); | |
| transfer[1].rx_buf = buf; | |
| transfer[1].len = len; | |
| spi_message_add_tail(&transfer[1], &message); | |
| mutex_lock(&flash->lock); | |
| spi_sync(flash->spi, &message); | |
| if (retlen && message.actual_length > sizeof(command)) | |
| *retlen += message.actual_length - sizeof(command); | |
| mutex_unlock(&flash->lock); | |
| return 0; | |
| } | |
| /* | |
| * Set the device into sequential mode. This allows read/writes to the | |
| * entire SRAM in a single operation | |
| */ | |
| static int mchp23k256_set_mode(struct spi_device *spi) | |
| { | |
| struct spi_transfer transfer = {}; | |
| struct spi_message message; | |
| unsigned char command[2]; | |
| spi_message_init(&message); | |
| command[0] = MCHP23K256_CMD_WRITE_STATUS; | |
| command[1] = MCHP23K256_MODE_SEQ; | |
| transfer.tx_buf = command; | |
| transfer.len = sizeof(command); | |
| spi_message_add_tail(&transfer, &message); | |
| return spi_sync(spi, &message); | |
| } | |
| static const struct mchp23_caps mchp23k256_caps = { | |
| .size = SZ_32K, | |
| .addr_width = 2, | |
| }; | |
| static const struct mchp23_caps mchp23lcv1024_caps = { | |
| .size = SZ_128K, | |
| .addr_width = 3, | |
| }; | |
| static int mchp23k256_probe(struct spi_device *spi) | |
| { | |
| struct mchp23k256_flash *flash; | |
| struct flash_platform_data *data; | |
| int err; | |
| flash = devm_kzalloc(&spi->dev, sizeof(*flash), GFP_KERNEL); | |
| if (!flash) | |
| return -ENOMEM; | |
| flash->spi = spi; | |
| mutex_init(&flash->lock); | |
| spi_set_drvdata(spi, flash); | |
| err = mchp23k256_set_mode(spi); | |
| if (err) | |
| return err; | |
| data = dev_get_platdata(&spi->dev); | |
| flash->caps = of_device_get_match_data(&spi->dev); | |
| if (!flash->caps) | |
| flash->caps = &mchp23k256_caps; | |
| mtd_set_of_node(&flash->mtd, spi->dev.of_node); | |
| flash->mtd.dev.parent = &spi->dev; | |
| flash->mtd.type = MTD_RAM; | |
| flash->mtd.flags = MTD_CAP_RAM; | |
| flash->mtd.writesize = 1; | |
| flash->mtd.size = flash->caps->size; | |
| flash->mtd._read = mchp23k256_read; | |
| flash->mtd._write = mchp23k256_write; | |
| err = mtd_device_register(&flash->mtd, data ? data->parts : NULL, | |
| data ? data->nr_parts : 0); | |
| if (err) | |
| return err; | |
| return 0; | |
| } | |
| static int mchp23k256_remove(struct spi_device *spi) | |
| { | |
| struct mchp23k256_flash *flash = spi_get_drvdata(spi); | |
| return mtd_device_unregister(&flash->mtd); | |
| } | |
| static const struct of_device_id mchp23k256_of_table[] = { | |
| { | |
| .compatible = "microchip,mchp23k256", | |
| .data = &mchp23k256_caps, | |
| }, | |
| { | |
| .compatible = "microchip,mchp23lcv1024", | |
| .data = &mchp23lcv1024_caps, | |
| }, | |
| {} | |
| }; | |
| MODULE_DEVICE_TABLE(of, mchp23k256_of_table); | |
| static struct spi_driver mchp23k256_driver = { | |
| .driver = { | |
| .name = "mchp23k256", | |
| .of_match_table = of_match_ptr(mchp23k256_of_table), | |
| }, | |
| .probe = mchp23k256_probe, | |
| .remove = mchp23k256_remove, | |
| }; | |
| module_spi_driver(mchp23k256_driver); | |
| MODULE_DESCRIPTION("MTD SPI driver for MCHP23K256 RAM chips"); | |
| MODULE_AUTHOR("Andrew Lunn <andre@lunn.ch>"); | |
| MODULE_LICENSE("GPL v2"); | |
| MODULE_ALIAS("spi:mchp23k256"); |