| /* | |
| * originally based on the dummy device. | |
| * | |
| * Copyright 1999, Thomas Davis, tadavis@lbl.gov. | |
| * Licensed under the GPL. Based on dummy.c, and eql.c devices. | |
| * | |
| * bonding.c: an Ethernet Bonding driver | |
| * | |
| * This is useful to talk to a Cisco EtherChannel compatible equipment: | |
| * Cisco 5500 | |
| * Sun Trunking (Solaris) | |
| * Alteon AceDirector Trunks | |
| * Linux Bonding | |
| * and probably many L2 switches ... | |
| * | |
| * How it works: | |
| * ifconfig bond0 ipaddress netmask up | |
| * will setup a network device, with an ip address. No mac address | |
| * will be assigned at this time. The hw mac address will come from | |
| * the first slave bonded to the channel. All slaves will then use | |
| * this hw mac address. | |
| * | |
| * ifconfig bond0 down | |
| * will release all slaves, marking them as down. | |
| * | |
| * ifenslave bond0 eth0 | |
| * will attach eth0 to bond0 as a slave. eth0 hw mac address will either | |
| * a: be used as initial mac address | |
| * b: if a hw mac address already is there, eth0's hw mac address | |
| * will then be set from bond0. | |
| * | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/types.h> | |
| #include <linux/fcntl.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/ptrace.h> | |
| #include <linux/ioport.h> | |
| #include <linux/in.h> | |
| #include <net/ip.h> | |
| #include <linux/ip.h> | |
| #include <linux/tcp.h> | |
| #include <linux/udp.h> | |
| #include <linux/slab.h> | |
| #include <linux/string.h> | |
| #include <linux/init.h> | |
| #include <linux/timer.h> | |
| #include <linux/socket.h> | |
| #include <linux/ctype.h> | |
| #include <linux/inet.h> | |
| #include <linux/bitops.h> | |
| #include <linux/io.h> | |
| #include <asm/dma.h> | |
| #include <linux/uaccess.h> | |
| #include <linux/errno.h> | |
| #include <linux/netdevice.h> | |
| #include <linux/inetdevice.h> | |
| #include <linux/igmp.h> | |
| #include <linux/etherdevice.h> | |
| #include <linux/skbuff.h> | |
| #include <net/sock.h> | |
| #include <linux/rtnetlink.h> | |
| #include <linux/smp.h> | |
| #include <linux/if_ether.h> | |
| #include <net/arp.h> | |
| #include <linux/mii.h> | |
| #include <linux/ethtool.h> | |
| #include <linux/if_vlan.h> | |
| #include <linux/if_bonding.h> | |
| #include <linux/jiffies.h> | |
| #include <linux/preempt.h> | |
| #include <net/route.h> | |
| #include <net/net_namespace.h> | |
| #include <net/netns/generic.h> | |
| #include <net/pkt_sched.h> | |
| #include <linux/rculist.h> | |
| #include <net/flow_dissector.h> | |
| #include <net/switchdev.h> | |
| #include <net/bonding.h> | |
| #include <net/bond_3ad.h> | |
| #include <net/bond_alb.h> | |
| #include "bonding_priv.h" | |
| /*---------------------------- Module parameters ----------------------------*/ | |
| /* monitor all links that often (in milliseconds). <=0 disables monitoring */ | |
| static int max_bonds = BOND_DEFAULT_MAX_BONDS; | |
| static int tx_queues = BOND_DEFAULT_TX_QUEUES; | |
| static int num_peer_notif = 1; | |
| static int miimon; | |
| static int updelay; | |
| static int downdelay; | |
| static int use_carrier = 1; | |
| static char *mode; | |
| static char *primary; | |
| static char *primary_reselect; | |
| static char *lacp_rate; | |
| static int min_links; | |
| static char *ad_select; | |
| static char *xmit_hash_policy; | |
| static int arp_interval; | |
| static char *arp_ip_target[BOND_MAX_ARP_TARGETS]; | |
| static char *arp_validate; | |
| static char *arp_all_targets; | |
| static char *fail_over_mac; | |
| static int all_slaves_active; | |
| static struct bond_params bonding_defaults; | |
| static int resend_igmp = BOND_DEFAULT_RESEND_IGMP; | |
| static int packets_per_slave = 1; | |
| static int lp_interval = BOND_ALB_DEFAULT_LP_INTERVAL; | |
| module_param(max_bonds, int, 0); | |
| MODULE_PARM_DESC(max_bonds, "Max number of bonded devices"); | |
| module_param(tx_queues, int, 0); | |
| MODULE_PARM_DESC(tx_queues, "Max number of transmit queues (default = 16)"); | |
| module_param_named(num_grat_arp, num_peer_notif, int, 0644); | |
| MODULE_PARM_DESC(num_grat_arp, "Number of peer notifications to send on " | |
| "failover event (alias of num_unsol_na)"); | |
| module_param_named(num_unsol_na, num_peer_notif, int, 0644); | |
| MODULE_PARM_DESC(num_unsol_na, "Number of peer notifications to send on " | |
| "failover event (alias of num_grat_arp)"); | |
| module_param(miimon, int, 0); | |
| MODULE_PARM_DESC(miimon, "Link check interval in milliseconds"); | |
| module_param(updelay, int, 0); | |
| MODULE_PARM_DESC(updelay, "Delay before considering link up, in milliseconds"); | |
| module_param(downdelay, int, 0); | |
| MODULE_PARM_DESC(downdelay, "Delay before considering link down, " | |
| "in milliseconds"); | |
| module_param(use_carrier, int, 0); | |
| MODULE_PARM_DESC(use_carrier, "Use netif_carrier_ok (vs MII ioctls) in miimon; " | |
| "0 for off, 1 for on (default)"); | |
| module_param(mode, charp, 0); | |
| MODULE_PARM_DESC(mode, "Mode of operation; 0 for balance-rr, " | |
| "1 for active-backup, 2 for balance-xor, " | |
| "3 for broadcast, 4 for 802.3ad, 5 for balance-tlb, " | |
| "6 for balance-alb"); | |
| module_param(primary, charp, 0); | |
| MODULE_PARM_DESC(primary, "Primary network device to use"); | |
| module_param(primary_reselect, charp, 0); | |
| MODULE_PARM_DESC(primary_reselect, "Reselect primary slave " | |
| "once it comes up; " | |
| "0 for always (default), " | |
| "1 for only if speed of primary is " | |
| "better, " | |
| "2 for only on active slave " | |
| "failure"); | |
| module_param(lacp_rate, charp, 0); | |
| MODULE_PARM_DESC(lacp_rate, "LACPDU tx rate to request from 802.3ad partner; " | |
| "0 for slow, 1 for fast"); | |
| module_param(ad_select, charp, 0); | |
| MODULE_PARM_DESC(ad_select, "802.3ad aggregation selection logic; " | |
| "0 for stable (default), 1 for bandwidth, " | |
| "2 for count"); | |
| module_param(min_links, int, 0); | |
| MODULE_PARM_DESC(min_links, "Minimum number of available links before turning on carrier"); | |
| module_param(xmit_hash_policy, charp, 0); | |
| MODULE_PARM_DESC(xmit_hash_policy, "balance-xor and 802.3ad hashing method; " | |
| "0 for layer 2 (default), 1 for layer 3+4, " | |
| "2 for layer 2+3, 3 for encap layer 2+3, " | |
| "4 for encap layer 3+4"); | |
| module_param(arp_interval, int, 0); | |
| MODULE_PARM_DESC(arp_interval, "arp interval in milliseconds"); | |
| module_param_array(arp_ip_target, charp, NULL, 0); | |
| MODULE_PARM_DESC(arp_ip_target, "arp targets in n.n.n.n form"); | |
| module_param(arp_validate, charp, 0); | |
| MODULE_PARM_DESC(arp_validate, "validate src/dst of ARP probes; " | |
| "0 for none (default), 1 for active, " | |
| "2 for backup, 3 for all"); | |
| module_param(arp_all_targets, charp, 0); | |
| MODULE_PARM_DESC(arp_all_targets, "fail on any/all arp targets timeout; 0 for any (default), 1 for all"); | |
| module_param(fail_over_mac, charp, 0); | |
| MODULE_PARM_DESC(fail_over_mac, "For active-backup, do not set all slaves to " | |
| "the same MAC; 0 for none (default), " | |
| "1 for active, 2 for follow"); | |
| module_param(all_slaves_active, int, 0); | |
| MODULE_PARM_DESC(all_slaves_active, "Keep all frames received on an interface " | |
| "by setting active flag for all slaves; " | |
| "0 for never (default), 1 for always."); | |
| module_param(resend_igmp, int, 0); | |
| MODULE_PARM_DESC(resend_igmp, "Number of IGMP membership reports to send on " | |
| "link failure"); | |
| module_param(packets_per_slave, int, 0); | |
| MODULE_PARM_DESC(packets_per_slave, "Packets to send per slave in balance-rr " | |
| "mode; 0 for a random slave, 1 packet per " | |
| "slave (default), >1 packets per slave."); | |
| module_param(lp_interval, uint, 0); | |
| MODULE_PARM_DESC(lp_interval, "The number of seconds between instances where " | |
| "the bonding driver sends learning packets to " | |
| "each slaves peer switch. The default is 1."); | |
| /*----------------------------- Global variables ----------------------------*/ | |
| #ifdef CONFIG_NET_POLL_CONTROLLER | |
| atomic_t netpoll_block_tx = ATOMIC_INIT(0); | |
| #endif | |
| unsigned int bond_net_id __read_mostly; | |
| /*-------------------------- Forward declarations ---------------------------*/ | |
| static int bond_init(struct net_device *bond_dev); | |
| static void bond_uninit(struct net_device *bond_dev); | |
| static void bond_get_stats(struct net_device *bond_dev, | |
| struct rtnl_link_stats64 *stats); | |
| static void bond_slave_arr_handler(struct work_struct *work); | |
| static bool bond_time_in_interval(struct bonding *bond, unsigned long last_act, | |
| int mod); | |
| /*---------------------------- General routines -----------------------------*/ | |
| const char *bond_mode_name(int mode) | |
| { | |
| static const char *names[] = { | |
| [BOND_MODE_ROUNDROBIN] = "load balancing (round-robin)", | |
| [BOND_MODE_ACTIVEBACKUP] = "fault-tolerance (active-backup)", | |
| [BOND_MODE_XOR] = "load balancing (xor)", | |
| [BOND_MODE_BROADCAST] = "fault-tolerance (broadcast)", | |
| [BOND_MODE_8023AD] = "IEEE 802.3ad Dynamic link aggregation", | |
| [BOND_MODE_TLB] = "transmit load balancing", | |
| [BOND_MODE_ALB] = "adaptive load balancing", | |
| }; | |
| if (mode < BOND_MODE_ROUNDROBIN || mode > BOND_MODE_ALB) | |
| return "unknown"; | |
| return names[mode]; | |
| } | |
| /*---------------------------------- VLAN -----------------------------------*/ | |
| /** | |
| * bond_dev_queue_xmit - Prepare skb for xmit. | |
| * | |
| * @bond: bond device that got this skb for tx. | |
| * @skb: hw accel VLAN tagged skb to transmit | |
| * @slave_dev: slave that is supposed to xmit this skbuff | |
| */ | |
| void bond_dev_queue_xmit(struct bonding *bond, struct sk_buff *skb, | |
| struct net_device *slave_dev) | |
| { | |
| skb->dev = slave_dev; | |
| BUILD_BUG_ON(sizeof(skb->queue_mapping) != | |
| sizeof(qdisc_skb_cb(skb)->slave_dev_queue_mapping)); | |
| skb->queue_mapping = qdisc_skb_cb(skb)->slave_dev_queue_mapping; | |
| if (unlikely(netpoll_tx_running(bond->dev))) | |
| bond_netpoll_send_skb(bond_get_slave_by_dev(bond, slave_dev), skb); | |
| else | |
| dev_queue_xmit(skb); | |
| } | |
| /* In the following 2 functions, bond_vlan_rx_add_vid and bond_vlan_rx_kill_vid, | |
| * We don't protect the slave list iteration with a lock because: | |
| * a. This operation is performed in IOCTL context, | |
| * b. The operation is protected by the RTNL semaphore in the 8021q code, | |
| * c. Holding a lock with BH disabled while directly calling a base driver | |
| * entry point is generally a BAD idea. | |
| * | |
| * The design of synchronization/protection for this operation in the 8021q | |
| * module is good for one or more VLAN devices over a single physical device | |
| * and cannot be extended for a teaming solution like bonding, so there is a | |
| * potential race condition here where a net device from the vlan group might | |
| * be referenced (either by a base driver or the 8021q code) while it is being | |
| * removed from the system. However, it turns out we're not making matters | |
| * worse, and if it works for regular VLAN usage it will work here too. | |
| */ | |
| /** | |
| * bond_vlan_rx_add_vid - Propagates adding an id to slaves | |
| * @bond_dev: bonding net device that got called | |
| * @vid: vlan id being added | |
| */ | |
| static int bond_vlan_rx_add_vid(struct net_device *bond_dev, | |
| __be16 proto, u16 vid) | |
| { | |
| struct bonding *bond = netdev_priv(bond_dev); | |
| struct slave *slave, *rollback_slave; | |
| struct list_head *iter; | |
| int res; | |
| bond_for_each_slave(bond, slave, iter) { | |
| res = vlan_vid_add(slave->dev, proto, vid); | |
| if (res) | |
| goto unwind; | |
| } | |
| return 0; | |
| unwind: | |
| /* unwind to the slave that failed */ | |
| bond_for_each_slave(bond, rollback_slave, iter) { | |
| if (rollback_slave == slave) | |
| break; | |
| vlan_vid_del(rollback_slave->dev, proto, vid); | |
| } | |
| return res; | |
| } | |
| /** | |
| * bond_vlan_rx_kill_vid - Propagates deleting an id to slaves | |
| * @bond_dev: bonding net device that got called | |
| * @vid: vlan id being removed | |
| */ | |
| static int bond_vlan_rx_kill_vid(struct net_device *bond_dev, | |
| __be16 proto, u16 vid) | |
| { | |
| struct bonding *bond = netdev_priv(bond_dev); | |
| struct list_head *iter; | |
| struct slave *slave; | |
| bond_for_each_slave(bond, slave, iter) | |
| vlan_vid_del(slave->dev, proto, vid); | |
| if (bond_is_lb(bond)) | |
| bond_alb_clear_vlan(bond, vid); | |
| return 0; | |
| } | |
| /*------------------------------- Link status -------------------------------*/ | |
| /* Set the carrier state for the master according to the state of its | |
| * slaves. If any slaves are up, the master is up. In 802.3ad mode, | |
| * do special 802.3ad magic. | |
| * | |
| * Returns zero if carrier state does not change, nonzero if it does. | |
| */ | |
| int bond_set_carrier(struct bonding *bond) | |
| { | |
| struct list_head *iter; | |
| struct slave *slave; | |
| if (!bond_has_slaves(bond)) | |
| goto down; | |
| if (BOND_MODE(bond) == BOND_MODE_8023AD) | |
| return bond_3ad_set_carrier(bond); | |
| bond_for_each_slave(bond, slave, iter) { | |
| if (slave->link == BOND_LINK_UP) { | |
| if (!netif_carrier_ok(bond->dev)) { | |
| netif_carrier_on(bond->dev); | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| } | |
| down: | |
| if (netif_carrier_ok(bond->dev)) { | |
| netif_carrier_off(bond->dev); | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| /* Get link speed and duplex from the slave's base driver | |
| * using ethtool. If for some reason the call fails or the | |
| * values are invalid, set speed and duplex to -1, | |
| * and return. Return 1 if speed or duplex settings are | |
| * UNKNOWN; 0 otherwise. | |
| */ | |
| static int bond_update_speed_duplex(struct slave *slave) | |
| { | |
| struct net_device *slave_dev = slave->dev; | |
| struct ethtool_link_ksettings ecmd; | |
| int res; | |
| slave->speed = SPEED_UNKNOWN; | |
| slave->duplex = DUPLEX_UNKNOWN; | |
| res = __ethtool_get_link_ksettings(slave_dev, &ecmd); | |
| if (res < 0) | |
| return 1; | |
| if (ecmd.base.speed == 0 || ecmd.base.speed == ((__u32)-1)) | |
| return 1; | |
| switch (ecmd.base.duplex) { | |
| case DUPLEX_FULL: | |
| case DUPLEX_HALF: | |
| break; | |
| default: | |
| return 1; | |
| } | |
| slave->speed = ecmd.base.speed; | |
| slave->duplex = ecmd.base.duplex; | |
| return 0; | |
| } | |
| const char *bond_slave_link_status(s8 link) | |
| { | |
| switch (link) { | |
| case BOND_LINK_UP: | |
| return "up"; | |
| case BOND_LINK_FAIL: | |
| return "going down"; | |
| case BOND_LINK_DOWN: | |
| return "down"; | |
| case BOND_LINK_BACK: | |
| return "going back"; | |
| default: | |
| return "unknown"; | |
| } | |
| } | |
| /* if <dev> supports MII link status reporting, check its link status. | |
| * | |
| * We either do MII/ETHTOOL ioctls, or check netif_carrier_ok(), | |
| * depending upon the setting of the use_carrier parameter. | |
| * | |
| * Return either BMSR_LSTATUS, meaning that the link is up (or we | |
| * can't tell and just pretend it is), or 0, meaning that the link is | |
| * down. | |
| * | |
| * If reporting is non-zero, instead of faking link up, return -1 if | |
| * both ETHTOOL and MII ioctls fail (meaning the device does not | |
| * support them). If use_carrier is set, return whatever it says. | |
| * It'd be nice if there was a good way to tell if a driver supports | |
| * netif_carrier, but there really isn't. | |
| */ | |
| static int bond_check_dev_link(struct bonding *bond, | |
| struct net_device *slave_dev, int reporting) | |
| { | |
| const struct net_device_ops *slave_ops = slave_dev->netdev_ops; | |
| int (*ioctl)(struct net_device *, struct ifreq *, int); | |
| struct ifreq ifr; | |
| struct mii_ioctl_data *mii; | |
| if (!reporting && !netif_running(slave_dev)) | |
| return 0; | |
| if (bond->params.use_carrier) | |
| return netif_carrier_ok(slave_dev) ? BMSR_LSTATUS : 0; | |
| /* Try to get link status using Ethtool first. */ | |
| if (slave_dev->ethtool_ops->get_link) | |
| return slave_dev->ethtool_ops->get_link(slave_dev) ? | |
| BMSR_LSTATUS : 0; | |
| /* Ethtool can't be used, fallback to MII ioctls. */ | |
| ioctl = slave_ops->ndo_do_ioctl; | |
| if (ioctl) { | |
| /* TODO: set pointer to correct ioctl on a per team member | |
| * bases to make this more efficient. that is, once | |
| * we determine the correct ioctl, we will always | |
| * call it and not the others for that team | |
| * member. | |
| */ | |
| /* We cannot assume that SIOCGMIIPHY will also read a | |
| * register; not all network drivers (e.g., e100) | |
| * support that. | |
| */ | |
| /* Yes, the mii is overlaid on the ifreq.ifr_ifru */ | |
| strncpy(ifr.ifr_name, slave_dev->name, IFNAMSIZ); | |
| mii = if_mii(&ifr); | |
| if (ioctl(slave_dev, &ifr, SIOCGMIIPHY) == 0) { | |
| mii->reg_num = MII_BMSR; | |
| if (ioctl(slave_dev, &ifr, SIOCGMIIREG) == 0) | |
| return mii->val_out & BMSR_LSTATUS; | |
| } | |
| } | |
| /* If reporting, report that either there's no dev->do_ioctl, | |
| * or both SIOCGMIIREG and get_link failed (meaning that we | |
| * cannot report link status). If not reporting, pretend | |
| * we're ok. | |
| */ | |
| return reporting ? -1 : BMSR_LSTATUS; | |
| } | |
| /*----------------------------- Multicast list ------------------------------*/ | |
| /* Push the promiscuity flag down to appropriate slaves */ | |
| static int bond_set_promiscuity(struct bonding *bond, int inc) | |
| { | |
| struct list_head *iter; | |
| int err = 0; | |
| if (bond_uses_primary(bond)) { | |
| struct slave *curr_active = rtnl_dereference(bond->curr_active_slave); | |
| if (curr_active) | |
| err = dev_set_promiscuity(curr_active->dev, inc); | |
| } else { | |
| struct slave *slave; | |
| bond_for_each_slave(bond, slave, iter) { | |
| err = dev_set_promiscuity(slave->dev, inc); | |
| if (err) | |
| return err; | |
| } | |
| } | |
| return err; | |
| } | |
| /* Push the allmulti flag down to all slaves */ | |
| static int bond_set_allmulti(struct bonding *bond, int inc) | |
| { | |
| struct list_head *iter; | |
| int err = 0; | |
| if (bond_uses_primary(bond)) { | |
| struct slave *curr_active = rtnl_dereference(bond->curr_active_slave); | |
| if (curr_active) | |
| err = dev_set_allmulti(curr_active->dev, inc); | |
| } else { | |
| struct slave *slave; | |
| bond_for_each_slave(bond, slave, iter) { | |
| err = dev_set_allmulti(slave->dev, inc); | |
| if (err) | |
| return err; | |
| } | |
| } | |
| return err; | |
| } | |
| /* Retrieve the list of registered multicast addresses for the bonding | |
| * device and retransmit an IGMP JOIN request to the current active | |
| * slave. | |
| */ | |
| static void bond_resend_igmp_join_requests_delayed(struct work_struct *work) | |
| { | |
| struct bonding *bond = container_of(work, struct bonding, | |
| mcast_work.work); | |
| if (!rtnl_trylock()) { | |
| queue_delayed_work(bond->wq, &bond->mcast_work, 1); | |
| return; | |
| } | |
| call_netdevice_notifiers(NETDEV_RESEND_IGMP, bond->dev); | |
| if (bond->igmp_retrans > 1) { | |
| bond->igmp_retrans--; | |
| queue_delayed_work(bond->wq, &bond->mcast_work, HZ/5); | |
| } | |
| rtnl_unlock(); | |
| } | |
| /* Flush bond's hardware addresses from slave */ | |
| static void bond_hw_addr_flush(struct net_device *bond_dev, | |
| struct net_device *slave_dev) | |
| { | |
| struct bonding *bond = netdev_priv(bond_dev); | |
| dev_uc_unsync(slave_dev, bond_dev); | |
| dev_mc_unsync(slave_dev, bond_dev); | |
| if (BOND_MODE(bond) == BOND_MODE_8023AD) { | |
| /* del lacpdu mc addr from mc list */ | |
| u8 lacpdu_multicast[ETH_ALEN] = MULTICAST_LACPDU_ADDR; | |
| dev_mc_del(slave_dev, lacpdu_multicast); | |
| } | |
| } | |
| /*--------------------------- Active slave change ---------------------------*/ | |
| /* Update the hardware address list and promisc/allmulti for the new and | |
| * old active slaves (if any). Modes that are not using primary keep all | |
| * slaves up date at all times; only the modes that use primary need to call | |
| * this function to swap these settings during a failover. | |
| */ | |
| static void bond_hw_addr_swap(struct bonding *bond, struct slave *new_active, | |
| struct slave *old_active) | |
| { | |
| if (old_active) { | |
| if (bond->dev->flags & IFF_PROMISC) | |
| dev_set_promiscuity(old_active->dev, -1); | |
| if (bond->dev->flags & IFF_ALLMULTI) | |
| dev_set_allmulti(old_active->dev, -1); | |
| bond_hw_addr_flush(bond->dev, old_active->dev); | |
| } | |
| if (new_active) { | |
| /* FIXME: Signal errors upstream. */ | |
| if (bond->dev->flags & IFF_PROMISC) | |
| dev_set_promiscuity(new_active->dev, 1); | |
| if (bond->dev->flags & IFF_ALLMULTI) | |
| dev_set_allmulti(new_active->dev, 1); | |
| netif_addr_lock_bh(bond->dev); | |
| dev_uc_sync(new_active->dev, bond->dev); | |
| dev_mc_sync(new_active->dev, bond->dev); | |
| netif_addr_unlock_bh(bond->dev); | |
| } | |
| } | |
| /** | |
| * bond_set_dev_addr - clone slave's address to bond | |
| * @bond_dev: bond net device | |
| * @slave_dev: slave net device | |
| * | |
| * Should be called with RTNL held. | |
| */ | |
| static void bond_set_dev_addr(struct net_device *bond_dev, | |
| struct net_device *slave_dev) | |
| { | |
| netdev_dbg(bond_dev, "bond_dev=%p slave_dev=%p slave_dev->name=%s slave_dev->addr_len=%d\n", | |
| bond_dev, slave_dev, slave_dev->name, slave_dev->addr_len); | |
| memcpy(bond_dev->dev_addr, slave_dev->dev_addr, slave_dev->addr_len); | |
| bond_dev->addr_assign_type = NET_ADDR_STOLEN; | |
| call_netdevice_notifiers(NETDEV_CHANGEADDR, bond_dev); | |
| } | |
| static struct slave *bond_get_old_active(struct bonding *bond, | |
| struct slave *new_active) | |
| { | |
| struct slave *slave; | |
| struct list_head *iter; | |
| bond_for_each_slave(bond, slave, iter) { | |
| if (slave == new_active) | |
| continue; | |
| if (ether_addr_equal(bond->dev->dev_addr, slave->dev->dev_addr)) | |
| return slave; | |
| } | |
| return NULL; | |
| } | |
| /* bond_do_fail_over_mac | |
| * | |
| * Perform special MAC address swapping for fail_over_mac settings | |
| * | |
| * Called with RTNL | |
| */ | |
| static void bond_do_fail_over_mac(struct bonding *bond, | |
| struct slave *new_active, | |
| struct slave *old_active) | |
| { | |
| u8 tmp_mac[MAX_ADDR_LEN]; | |
| struct sockaddr_storage ss; | |
| int rv; | |
| switch (bond->params.fail_over_mac) { | |
| case BOND_FOM_ACTIVE: | |
| if (new_active) | |
| bond_set_dev_addr(bond->dev, new_active->dev); | |
| break; | |
| case BOND_FOM_FOLLOW: | |
| /* if new_active && old_active, swap them | |
| * if just old_active, do nothing (going to no active slave) | |
| * if just new_active, set new_active to bond's MAC | |
| */ | |
| if (!new_active) | |
| return; | |
| if (!old_active) | |
| old_active = bond_get_old_active(bond, new_active); | |
| if (old_active) { | |
| bond_hw_addr_copy(tmp_mac, new_active->dev->dev_addr, | |
| new_active->dev->addr_len); | |
| bond_hw_addr_copy(ss.__data, | |
| old_active->dev->dev_addr, | |
| old_active->dev->addr_len); | |
| ss.ss_family = new_active->dev->type; | |
| } else { | |
| bond_hw_addr_copy(ss.__data, bond->dev->dev_addr, | |
| bond->dev->addr_len); | |
| ss.ss_family = bond->dev->type; | |
| } | |
| rv = dev_set_mac_address(new_active->dev, | |
| (struct sockaddr *)&ss); | |
| if (rv) { | |
| netdev_err(bond->dev, "Error %d setting MAC of slave %s\n", | |
| -rv, new_active->dev->name); | |
| goto out; | |
| } | |
| if (!old_active) | |
| goto out; | |
| bond_hw_addr_copy(ss.__data, tmp_mac, | |
| new_active->dev->addr_len); | |
| ss.ss_family = old_active->dev->type; | |
| rv = dev_set_mac_address(old_active->dev, | |
| (struct sockaddr *)&ss); | |
| if (rv) | |
| netdev_err(bond->dev, "Error %d setting MAC of slave %s\n", | |
| -rv, new_active->dev->name); | |
| out: | |
| break; | |
| default: | |
| netdev_err(bond->dev, "bond_do_fail_over_mac impossible: bad policy %d\n", | |
| bond->params.fail_over_mac); | |
| break; | |
| } | |
| } | |
| static struct slave *bond_choose_primary_or_current(struct bonding *bond) | |
| { | |
| struct slave *prim = rtnl_dereference(bond->primary_slave); | |
| struct slave *curr = rtnl_dereference(bond->curr_active_slave); | |
| if (!prim || prim->link != BOND_LINK_UP) { | |
| if (!curr || curr->link != BOND_LINK_UP) | |
| return NULL; | |
| return curr; | |
| } | |
| if (bond->force_primary) { | |
| bond->force_primary = false; | |
| return prim; | |
| } | |
| if (!curr || curr->link != BOND_LINK_UP) | |
| return prim; | |
| /* At this point, prim and curr are both up */ | |
| switch (bond->params.primary_reselect) { | |
| case BOND_PRI_RESELECT_ALWAYS: | |
| return prim; | |
| case BOND_PRI_RESELECT_BETTER: | |
| if (prim->speed < curr->speed) | |
| return curr; | |
| if (prim->speed == curr->speed && prim->duplex <= curr->duplex) | |
| return curr; | |
| return prim; | |
| case BOND_PRI_RESELECT_FAILURE: | |
| return curr; | |
| default: | |
| netdev_err(bond->dev, "impossible primary_reselect %d\n", | |
| bond->params.primary_reselect); | |
| return curr; | |
| } | |
| } | |
| /** | |
| * bond_find_best_slave - select the best available slave to be the active one | |
| * @bond: our bonding struct | |
| */ | |
| static struct slave *bond_find_best_slave(struct bonding *bond) | |
| { | |
| struct slave *slave, *bestslave = NULL; | |
| struct list_head *iter; | |
| int mintime = bond->params.updelay; | |
| slave = bond_choose_primary_or_current(bond); | |
| if (slave) | |
| return slave; | |
| bond_for_each_slave(bond, slave, iter) { | |
| if (slave->link == BOND_LINK_UP) | |
| return slave; | |
| if (slave->link == BOND_LINK_BACK && bond_slave_is_up(slave) && | |
| slave->delay < mintime) { | |
| mintime = slave->delay; | |
| bestslave = slave; | |
| } | |
| } | |
| return bestslave; | |
| } | |
| static bool bond_should_notify_peers(struct bonding *bond) | |
| { | |
| struct slave *slave; | |
| rcu_read_lock(); | |
| slave = rcu_dereference(bond->curr_active_slave); | |
| rcu_read_unlock(); | |
| netdev_dbg(bond->dev, "bond_should_notify_peers: slave %s\n", | |
| slave ? slave->dev->name : "NULL"); | |
| if (!slave || !bond->send_peer_notif || | |
| !netif_carrier_ok(bond->dev) || | |
| test_bit(__LINK_STATE_LINKWATCH_PENDING, &slave->dev->state)) | |
| return false; | |
| return true; | |
| } | |
| /** | |
| * change_active_interface - change the active slave into the specified one | |
| * @bond: our bonding struct | |
| * @new: the new slave to make the active one | |
| * | |
| * Set the new slave to the bond's settings and unset them on the old | |
| * curr_active_slave. | |
| * Setting include flags, mc-list, promiscuity, allmulti, etc. | |
| * | |
| * If @new's link state is %BOND_LINK_BACK we'll set it to %BOND_LINK_UP, | |
| * because it is apparently the best available slave we have, even though its | |
| * updelay hasn't timed out yet. | |
| * | |
| * Caller must hold RTNL. | |
| */ | |
| void bond_change_active_slave(struct bonding *bond, struct slave *new_active) | |
| { | |
| struct slave *old_active; | |
| ASSERT_RTNL(); | |
| old_active = rtnl_dereference(bond->curr_active_slave); | |
| if (old_active == new_active) | |
| return; | |
| if (new_active) { | |
| new_active->last_link_up = jiffies; | |
| if (new_active->link == BOND_LINK_BACK) { | |
| if (bond_uses_primary(bond)) { | |
| netdev_info(bond->dev, "making interface %s the new active one %d ms earlier\n", | |
| new_active->dev->name, | |
| (bond->params.updelay - new_active->delay) * bond->params.miimon); | |
| } | |
| new_active->delay = 0; | |
| bond_set_slave_link_state(new_active, BOND_LINK_UP, | |
| BOND_SLAVE_NOTIFY_NOW); | |
| if (BOND_MODE(bond) == BOND_MODE_8023AD) | |
| bond_3ad_handle_link_change(new_active, BOND_LINK_UP); | |
| if (bond_is_lb(bond)) | |
| bond_alb_handle_link_change(bond, new_active, BOND_LINK_UP); | |
| } else { | |
| if (bond_uses_primary(bond)) { | |
| netdev_info(bond->dev, "making interface %s the new active one\n", | |
| new_active->dev->name); | |
| } | |
| } | |
| } | |
| if (bond_uses_primary(bond)) | |
| bond_hw_addr_swap(bond, new_active, old_active); | |
| if (bond_is_lb(bond)) { | |
| bond_alb_handle_active_change(bond, new_active); | |
| if (old_active) | |
| bond_set_slave_inactive_flags(old_active, | |
| BOND_SLAVE_NOTIFY_NOW); | |
| if (new_active) | |
| bond_set_slave_active_flags(new_active, | |
| BOND_SLAVE_NOTIFY_NOW); | |
| } else { | |
| rcu_assign_pointer(bond->curr_active_slave, new_active); | |
| } | |
| if (BOND_MODE(bond) == BOND_MODE_ACTIVEBACKUP) { | |
| if (old_active) | |
| bond_set_slave_inactive_flags(old_active, | |
| BOND_SLAVE_NOTIFY_NOW); | |
| if (new_active) { | |
| bool should_notify_peers = false; | |
| bond_set_slave_active_flags(new_active, | |
| BOND_SLAVE_NOTIFY_NOW); | |
| if (bond->params.fail_over_mac) | |
| bond_do_fail_over_mac(bond, new_active, | |
| old_active); | |
| if (netif_running(bond->dev)) { | |
| bond->send_peer_notif = | |
| bond->params.num_peer_notif; | |
| should_notify_peers = | |
| bond_should_notify_peers(bond); | |
| } | |
| call_netdevice_notifiers(NETDEV_BONDING_FAILOVER, bond->dev); | |
| if (should_notify_peers) | |
| call_netdevice_notifiers(NETDEV_NOTIFY_PEERS, | |
| bond->dev); | |
| } | |
| } | |
| /* resend IGMP joins since active slave has changed or | |
| * all were sent on curr_active_slave. | |
| * resend only if bond is brought up with the affected | |
| * bonding modes and the retransmission is enabled | |
| */ | |
| if (netif_running(bond->dev) && (bond->params.resend_igmp > 0) && | |
| ((bond_uses_primary(bond) && new_active) || | |
| BOND_MODE(bond) == BOND_MODE_ROUNDROBIN)) { | |
| bond->igmp_retrans = bond->params.resend_igmp; | |
| queue_delayed_work(bond->wq, &bond->mcast_work, 1); | |
| } | |
| } | |
| /** | |
| * bond_select_active_slave - select a new active slave, if needed | |
| * @bond: our bonding struct | |
| * | |
| * This functions should be called when one of the following occurs: | |
| * - The old curr_active_slave has been released or lost its link. | |
| * - The primary_slave has got its link back. | |
| * - A slave has got its link back and there's no old curr_active_slave. | |
| * | |
| * Caller must hold RTNL. | |
| */ | |
| void bond_select_active_slave(struct bonding *bond) | |
| { | |
| struct slave *best_slave; | |
| int rv; | |
| ASSERT_RTNL(); | |
| best_slave = bond_find_best_slave(bond); | |
| if (best_slave != rtnl_dereference(bond->curr_active_slave)) { | |
| bond_change_active_slave(bond, best_slave); | |
| rv = bond_set_carrier(bond); | |
| if (!rv) | |
| return; | |
| if (netif_carrier_ok(bond->dev)) | |
| netdev_info(bond->dev, "first active interface up!\n"); | |
| else | |
| netdev_info(bond->dev, "now running without any active interface!\n"); | |
| } | |
| } | |
| #ifdef CONFIG_NET_POLL_CONTROLLER | |
| static inline int slave_enable_netpoll(struct slave *slave) | |
| { | |
| struct netpoll *np; | |
| int err = 0; | |
| np = kzalloc(sizeof(*np), GFP_KERNEL); | |
| err = -ENOMEM; | |
| if (!np) | |
| goto out; | |
| err = __netpoll_setup(np, slave->dev); | |
| if (err) { | |
| kfree(np); | |
| goto out; | |
| } | |
| slave->np = np; | |
| out: | |
| return err; | |
| } | |
| static inline void slave_disable_netpoll(struct slave *slave) | |
| { | |
| struct netpoll *np = slave->np; | |
| if (!np) | |
| return; | |
| slave->np = NULL; | |
| __netpoll_free_async(np); | |
| } | |
| static void bond_poll_controller(struct net_device *bond_dev) | |
| { | |
| struct bonding *bond = netdev_priv(bond_dev); | |
| struct slave *slave = NULL; | |
| struct list_head *iter; | |
| struct ad_info ad_info; | |
| struct netpoll_info *ni; | |
| const struct net_device_ops *ops; | |
| if (BOND_MODE(bond) == BOND_MODE_8023AD) | |
| if (bond_3ad_get_active_agg_info(bond, &ad_info)) | |
| return; | |
| bond_for_each_slave_rcu(bond, slave, iter) { | |
| ops = slave->dev->netdev_ops; | |
| if (!bond_slave_is_up(slave) || !ops->ndo_poll_controller) | |
| continue; | |
| if (BOND_MODE(bond) == BOND_MODE_8023AD) { | |
| struct aggregator *agg = | |
| SLAVE_AD_INFO(slave)->port.aggregator; | |
| if (agg && | |
| agg->aggregator_identifier != ad_info.aggregator_id) | |
| continue; | |
| } | |
| ni = rcu_dereference_bh(slave->dev->npinfo); | |
| if (down_trylock(&ni->dev_lock)) | |
| continue; | |
| ops->ndo_poll_controller(slave->dev); | |
| up(&ni->dev_lock); | |
| } | |
| } | |
| static void bond_netpoll_cleanup(struct net_device *bond_dev) | |
| { | |
| struct bonding *bond = netdev_priv(bond_dev); | |
| struct list_head *iter; | |
| struct slave *slave; | |
| bond_for_each_slave(bond, slave, iter) | |
| if (bond_slave_is_up(slave)) | |
| slave_disable_netpoll(slave); | |
| } | |
| static int bond_netpoll_setup(struct net_device *dev, struct netpoll_info *ni) | |
| { | |
| struct bonding *bond = netdev_priv(dev); | |
| struct list_head *iter; | |
| struct slave *slave; | |
| int err = 0; | |
| bond_for_each_slave(bond, slave, iter) { | |
| err = slave_enable_netpoll(slave); | |
| if (err) { | |
| bond_netpoll_cleanup(dev); | |
| break; | |
| } | |
| } | |
| return err; | |
| } | |
| #else | |
| static inline int slave_enable_netpoll(struct slave *slave) | |
| { | |
| return 0; | |
| } | |
| static inline void slave_disable_netpoll(struct slave *slave) | |
| { | |
| } | |
| static void bond_netpoll_cleanup(struct net_device *bond_dev) | |
| { | |
| } | |
| #endif | |
| /*---------------------------------- IOCTL ----------------------------------*/ | |
| static netdev_features_t bond_fix_features(struct net_device *dev, | |
| netdev_features_t features) | |
| { | |
| struct bonding *bond = netdev_priv(dev); | |
| struct list_head *iter; | |
| netdev_features_t mask; | |
| struct slave *slave; | |
| mask = features; | |
| features &= ~NETIF_F_ONE_FOR_ALL; | |
| features |= NETIF_F_ALL_FOR_ALL; | |
| bond_for_each_slave(bond, slave, iter) { | |
| features = netdev_increment_features(features, | |
| slave->dev->features, | |
| mask); | |
| } | |
| features = netdev_add_tso_features(features, mask); | |
| return features; | |
| } | |
| #define BOND_VLAN_FEATURES (NETIF_F_HW_CSUM | NETIF_F_SG | \ | |
| NETIF_F_FRAGLIST | NETIF_F_ALL_TSO | \ | |
| NETIF_F_HIGHDMA | NETIF_F_LRO) | |
| #define BOND_ENC_FEATURES (NETIF_F_HW_CSUM | NETIF_F_SG | \ | |
| NETIF_F_RXCSUM | NETIF_F_ALL_TSO) | |
| static void bond_compute_features(struct bonding *bond) | |
| { | |
| unsigned int dst_release_flag = IFF_XMIT_DST_RELEASE | | |
| IFF_XMIT_DST_RELEASE_PERM; | |
| netdev_features_t vlan_features = BOND_VLAN_FEATURES; | |
| netdev_features_t enc_features = BOND_ENC_FEATURES; | |
| struct net_device *bond_dev = bond->dev; | |
| struct list_head *iter; | |
| struct slave *slave; | |
| unsigned short max_hard_header_len = ETH_HLEN; | |
| unsigned int gso_max_size = GSO_MAX_SIZE; | |
| u16 gso_max_segs = GSO_MAX_SEGS; | |
| if (!bond_has_slaves(bond)) | |
| goto done; | |
| vlan_features &= NETIF_F_ALL_FOR_ALL; | |
| bond_for_each_slave(bond, slave, iter) { | |
| vlan_features = netdev_increment_features(vlan_features, | |
| slave->dev->vlan_features, BOND_VLAN_FEATURES); | |
| enc_features = netdev_increment_features(enc_features, | |
| slave->dev->hw_enc_features, | |
| BOND_ENC_FEATURES); | |
| dst_release_flag &= slave->dev->priv_flags; | |
| if (slave->dev->hard_header_len > max_hard_header_len) | |
| max_hard_header_len = slave->dev->hard_header_len; | |
| gso_max_size = min(gso_max_size, slave->dev->gso_max_size); | |
| gso_max_segs = min(gso_max_segs, slave->dev->gso_max_segs); | |
| } | |
| bond_dev->hard_header_len = max_hard_header_len; | |
| done: | |
| bond_dev->vlan_features = vlan_features; | |
| bond_dev->hw_enc_features = enc_features | NETIF_F_GSO_ENCAP_ALL; | |
| bond_dev->gso_max_segs = gso_max_segs; | |
| netif_set_gso_max_size(bond_dev, gso_max_size); | |
| bond_dev->priv_flags &= ~IFF_XMIT_DST_RELEASE; | |
| if ((bond_dev->priv_flags & IFF_XMIT_DST_RELEASE_PERM) && | |
| dst_release_flag == (IFF_XMIT_DST_RELEASE | IFF_XMIT_DST_RELEASE_PERM)) | |
| bond_dev->priv_flags |= IFF_XMIT_DST_RELEASE; | |
| netdev_change_features(bond_dev); | |
| } | |
| static void bond_setup_by_slave(struct net_device *bond_dev, | |
| struct net_device *slave_dev) | |
| { | |
| bond_dev->header_ops = slave_dev->header_ops; | |
| bond_dev->type = slave_dev->type; | |
| bond_dev->hard_header_len = slave_dev->hard_header_len; | |
| bond_dev->addr_len = slave_dev->addr_len; | |
| memcpy(bond_dev->broadcast, slave_dev->broadcast, | |
| slave_dev->addr_len); | |
| } | |
| /* On bonding slaves other than the currently active slave, suppress | |
| * duplicates except for alb non-mcast/bcast. | |
| */ | |
| static bool bond_should_deliver_exact_match(struct sk_buff *skb, | |
| struct slave *slave, | |
| struct bonding *bond) | |
| { | |
| if (bond_is_slave_inactive(slave)) { | |
| if (BOND_MODE(bond) == BOND_MODE_ALB && | |
| skb->pkt_type != PACKET_BROADCAST && | |
| skb->pkt_type != PACKET_MULTICAST) | |
| return false; | |
| return true; | |
| } | |
| return false; | |
| } | |
| static rx_handler_result_t bond_handle_frame(struct sk_buff **pskb) | |
| { | |
| struct sk_buff *skb = *pskb; | |
| struct slave *slave; | |
| struct bonding *bond; | |
| int (*recv_probe)(const struct sk_buff *, struct bonding *, | |
| struct slave *); | |
| int ret = RX_HANDLER_ANOTHER; | |
| skb = skb_share_check(skb, GFP_ATOMIC); | |
| if (unlikely(!skb)) | |
| return RX_HANDLER_CONSUMED; | |
| *pskb = skb; | |
| slave = bond_slave_get_rcu(skb->dev); | |
| bond = slave->bond; | |
| recv_probe = ACCESS_ONCE(bond->recv_probe); | |
| if (recv_probe) { | |
| ret = recv_probe(skb, bond, slave); | |
| if (ret == RX_HANDLER_CONSUMED) { | |
| consume_skb(skb); | |
| return ret; | |
| } | |
| } | |
| /* don't change skb->dev for link-local packets */ | |
| if (is_link_local_ether_addr(eth_hdr(skb)->h_dest)) | |
| return RX_HANDLER_PASS; | |
| if (bond_should_deliver_exact_match(skb, slave, bond)) | |
| return RX_HANDLER_EXACT; | |
| skb->dev = bond->dev; | |
| if (BOND_MODE(bond) == BOND_MODE_ALB && | |
| bond->dev->priv_flags & IFF_BRIDGE_PORT && | |
| skb->pkt_type == PACKET_HOST) { | |
| if (unlikely(skb_cow_head(skb, | |
| skb->data - skb_mac_header(skb)))) { | |
| kfree_skb(skb); | |
| return RX_HANDLER_CONSUMED; | |
| } | |
| bond_hw_addr_copy(eth_hdr(skb)->h_dest, bond->dev->dev_addr, | |
| bond->dev->addr_len); | |
| } | |
| return ret; | |
| } | |
| static enum netdev_lag_tx_type bond_lag_tx_type(struct bonding *bond) | |
| { | |
| switch (BOND_MODE(bond)) { | |
| case BOND_MODE_ROUNDROBIN: | |
| return NETDEV_LAG_TX_TYPE_ROUNDROBIN; | |
| case BOND_MODE_ACTIVEBACKUP: | |
| return NETDEV_LAG_TX_TYPE_ACTIVEBACKUP; | |
| case BOND_MODE_BROADCAST: | |
| return NETDEV_LAG_TX_TYPE_BROADCAST; | |
| case BOND_MODE_XOR: | |
| case BOND_MODE_8023AD: | |
| return NETDEV_LAG_TX_TYPE_HASH; | |
| default: | |
| return NETDEV_LAG_TX_TYPE_UNKNOWN; | |
| } | |
| } | |
| static int bond_master_upper_dev_link(struct bonding *bond, struct slave *slave) | |
| { | |
| struct netdev_lag_upper_info lag_upper_info; | |
| int err; | |
| lag_upper_info.tx_type = bond_lag_tx_type(bond); | |
| err = netdev_master_upper_dev_link(slave->dev, bond->dev, slave, | |
| &lag_upper_info); | |
| if (err) | |
| return err; | |
| rtmsg_ifinfo(RTM_NEWLINK, slave->dev, IFF_SLAVE, GFP_KERNEL); | |
| return 0; | |
| } | |
| static void bond_upper_dev_unlink(struct bonding *bond, struct slave *slave) | |
| { | |
| netdev_upper_dev_unlink(slave->dev, bond->dev); | |
| slave->dev->flags &= ~IFF_SLAVE; | |
| rtmsg_ifinfo(RTM_NEWLINK, slave->dev, IFF_SLAVE, GFP_KERNEL); | |
| } | |
| static struct slave *bond_alloc_slave(struct bonding *bond) | |
| { | |
| struct slave *slave = NULL; | |
| slave = kzalloc(sizeof(*slave), GFP_KERNEL); | |
| if (!slave) | |
| return NULL; | |
| if (BOND_MODE(bond) == BOND_MODE_8023AD) { | |
| SLAVE_AD_INFO(slave) = kzalloc(sizeof(struct ad_slave_info), | |
| GFP_KERNEL); | |
| if (!SLAVE_AD_INFO(slave)) { | |
| kfree(slave); | |
| return NULL; | |
| } | |
| } | |
| return slave; | |
| } | |
| static void bond_free_slave(struct slave *slave) | |
| { | |
| struct bonding *bond = bond_get_bond_by_slave(slave); | |
| if (BOND_MODE(bond) == BOND_MODE_8023AD) | |
| kfree(SLAVE_AD_INFO(slave)); | |
| kfree(slave); | |
| } | |
| static void bond_fill_ifbond(struct bonding *bond, struct ifbond *info) | |
| { | |
| info->bond_mode = BOND_MODE(bond); | |
| info->miimon = bond->params.miimon; | |
| info->num_slaves = bond->slave_cnt; | |
| } | |
| static void bond_fill_ifslave(struct slave *slave, struct ifslave *info) | |
| { | |
| strcpy(info->slave_name, slave->dev->name); | |
| info->link = slave->link; | |
| info->state = bond_slave_state(slave); | |
| info->link_failure_count = slave->link_failure_count; | |
| } | |
| static void bond_netdev_notify(struct net_device *dev, | |
| struct netdev_bonding_info *info) | |
| { | |
| rtnl_lock(); | |
| netdev_bonding_info_change(dev, info); | |
| rtnl_unlock(); | |
| } | |
| static void bond_netdev_notify_work(struct work_struct *_work) | |
| { | |
| struct netdev_notify_work *w = | |
| container_of(_work, struct netdev_notify_work, work.work); | |
| bond_netdev_notify(w->dev, &w->bonding_info); | |
| dev_put(w->dev); | |
| kfree(w); | |
| } | |
| void bond_queue_slave_event(struct slave *slave) | |
| { | |
| struct bonding *bond = slave->bond; | |
| struct netdev_notify_work *nnw = kzalloc(sizeof(*nnw), GFP_ATOMIC); | |
| if (!nnw) | |
| return; | |
| dev_hold(slave->dev); | |
| nnw->dev = slave->dev; | |
| bond_fill_ifslave(slave, &nnw->bonding_info.slave); | |
| bond_fill_ifbond(bond, &nnw->bonding_info.master); | |
| INIT_DELAYED_WORK(&nnw->work, bond_netdev_notify_work); | |
| queue_delayed_work(slave->bond->wq, &nnw->work, 0); | |
| } | |
| void bond_lower_state_changed(struct slave *slave) | |
| { | |
| struct netdev_lag_lower_state_info info; | |
| info.link_up = slave->link == BOND_LINK_UP || | |
| slave->link == BOND_LINK_FAIL; | |
| info.tx_enabled = bond_is_active_slave(slave); | |
| netdev_lower_state_changed(slave->dev, &info); | |
| } | |
| /* enslave device <slave> to bond device <master> */ | |
| int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev) | |
| { | |
| struct bonding *bond = netdev_priv(bond_dev); | |
| const struct net_device_ops *slave_ops = slave_dev->netdev_ops; | |
| struct slave *new_slave = NULL, *prev_slave; | |
| struct sockaddr_storage ss; | |
| int link_reporting; | |
| int res = 0, i; | |
| if (!bond->params.use_carrier && | |
| slave_dev->ethtool_ops->get_link == NULL && | |
| slave_ops->ndo_do_ioctl == NULL) { | |
| netdev_warn(bond_dev, "no link monitoring support for %s\n", | |
| slave_dev->name); | |
| } | |
| /* already in-use? */ | |
| if (netdev_is_rx_handler_busy(slave_dev)) { | |
| netdev_err(bond_dev, | |
| "Error: Device is in use and cannot be enslaved\n"); | |
| return -EBUSY; | |
| } | |
| if (bond_dev == slave_dev) { | |
| netdev_err(bond_dev, "cannot enslave bond to itself.\n"); | |
| return -EPERM; | |
| } | |
| /* vlan challenged mutual exclusion */ | |
| /* no need to lock since we're protected by rtnl_lock */ | |
| if (slave_dev->features & NETIF_F_VLAN_CHALLENGED) { | |
| netdev_dbg(bond_dev, "%s is NETIF_F_VLAN_CHALLENGED\n", | |
| slave_dev->name); | |
| if (vlan_uses_dev(bond_dev)) { | |
| netdev_err(bond_dev, "Error: cannot enslave VLAN challenged slave %s on VLAN enabled bond %s\n", | |
| slave_dev->name, bond_dev->name); | |
| return -EPERM; | |
| } else { | |
| netdev_warn(bond_dev, "enslaved VLAN challenged slave %s. Adding VLANs will be blocked as long as %s is part of bond %s\n", | |
| slave_dev->name, slave_dev->name, | |
| bond_dev->name); | |
| } | |
| } else { | |
| netdev_dbg(bond_dev, "%s is !NETIF_F_VLAN_CHALLENGED\n", | |
| slave_dev->name); | |
| } | |
| /* Old ifenslave binaries are no longer supported. These can | |
| * be identified with moderate accuracy by the state of the slave: | |
| * the current ifenslave will set the interface down prior to | |
| * enslaving it; the old ifenslave will not. | |
| */ | |
| if (slave_dev->flags & IFF_UP) { | |
| netdev_err(bond_dev, "%s is up - this may be due to an out of date ifenslave\n", | |
| slave_dev->name); | |
| return -EPERM; | |
| } | |
| /* set bonding device ether type by slave - bonding netdevices are | |
| * created with ether_setup, so when the slave type is not ARPHRD_ETHER | |
| * there is a need to override some of the type dependent attribs/funcs. | |
| * | |
| * bond ether type mutual exclusion - don't allow slaves of dissimilar | |
| * ether type (eg ARPHRD_ETHER and ARPHRD_INFINIBAND) share the same bond | |
| */ | |
| if (!bond_has_slaves(bond)) { | |
| if (bond_dev->type != slave_dev->type) { | |
| netdev_dbg(bond_dev, "change device type from %d to %d\n", | |
| bond_dev->type, slave_dev->type); | |
| res = call_netdevice_notifiers(NETDEV_PRE_TYPE_CHANGE, | |
| bond_dev); | |
| res = notifier_to_errno(res); | |
| if (res) { | |
| netdev_err(bond_dev, "refused to change device type\n"); | |
| return -EBUSY; | |
| } | |
| /* Flush unicast and multicast addresses */ | |
| dev_uc_flush(bond_dev); | |
| dev_mc_flush(bond_dev); | |
| if (slave_dev->type != ARPHRD_ETHER) | |
| bond_setup_by_slave(bond_dev, slave_dev); | |
| else { | |
| ether_setup(bond_dev); | |
| bond_dev->priv_flags &= ~IFF_TX_SKB_SHARING; | |
| } | |
| call_netdevice_notifiers(NETDEV_POST_TYPE_CHANGE, | |
| bond_dev); | |
| } | |
| } else if (bond_dev->type != slave_dev->type) { | |
| netdev_err(bond_dev, "%s ether type (%d) is different from other slaves (%d), can not enslave it\n", | |
| slave_dev->name, slave_dev->type, bond_dev->type); | |
| return -EINVAL; | |
| } | |
| if (slave_dev->type == ARPHRD_INFINIBAND && | |
| BOND_MODE(bond) != BOND_MODE_ACTIVEBACKUP) { | |
| netdev_warn(bond_dev, "Type (%d) supports only active-backup mode\n", | |
| slave_dev->type); | |
| res = -EOPNOTSUPP; | |
| goto err_undo_flags; | |
| } | |
| if (!slave_ops->ndo_set_mac_address || | |
| slave_dev->type == ARPHRD_INFINIBAND) { | |
| netdev_warn(bond_dev, "The slave device specified does not support setting the MAC address\n"); | |
| if (BOND_MODE(bond) == BOND_MODE_ACTIVEBACKUP && | |
| bond->params.fail_over_mac != BOND_FOM_ACTIVE) { | |
| if (!bond_has_slaves(bond)) { | |
| bond->params.fail_over_mac = BOND_FOM_ACTIVE; | |
| netdev_warn(bond_dev, "Setting fail_over_mac to active for active-backup mode\n"); | |
| } else { | |
| netdev_err(bond_dev, "The slave device specified does not support setting the MAC address, but fail_over_mac is not set to active\n"); | |
| res = -EOPNOTSUPP; | |
| goto err_undo_flags; | |
| } | |
| } | |
| } | |
| call_netdevice_notifiers(NETDEV_JOIN, slave_dev); | |
| /* If this is the first slave, then we need to set the master's hardware | |
| * address to be the same as the slave's. | |
| */ | |
| if (!bond_has_slaves(bond) && | |
| bond->dev->addr_assign_type == NET_ADDR_RANDOM) | |
| bond_set_dev_addr(bond->dev, slave_dev); | |
| new_slave = bond_alloc_slave(bond); | |
| if (!new_slave) { | |
| res = -ENOMEM; | |
| goto err_undo_flags; | |
| } | |
| new_slave->bond = bond; | |
| new_slave->dev = slave_dev; | |
| /* Set the new_slave's queue_id to be zero. Queue ID mapping | |
| * is set via sysfs or module option if desired. | |
| */ | |
| new_slave->queue_id = 0; | |
| /* Save slave's original mtu and then set it to match the bond */ | |
| new_slave->original_mtu = slave_dev->mtu; | |
| res = dev_set_mtu(slave_dev, bond->dev->mtu); | |
| if (res) { | |
| netdev_dbg(bond_dev, "Error %d calling dev_set_mtu\n", res); | |
| goto err_free; | |
| } | |
| /* Save slave's original ("permanent") mac address for modes | |
| * that need it, and for restoring it upon release, and then | |
| * set it to the master's address | |
| */ | |
| bond_hw_addr_copy(new_slave->perm_hwaddr, slave_dev->dev_addr, | |
| slave_dev->addr_len); | |
| if (!bond->params.fail_over_mac || | |
| BOND_MODE(bond) != BOND_MODE_ACTIVEBACKUP) { | |
| /* Set slave to master's mac address. The application already | |
| * set the master's mac address to that of the first slave | |
| */ | |
| memcpy(ss.__data, bond_dev->dev_addr, bond_dev->addr_len); | |
| ss.ss_family = slave_dev->type; | |
| res = dev_set_mac_address(slave_dev, (struct sockaddr *)&ss); | |
| if (res) { | |
| netdev_dbg(bond_dev, "Error %d calling set_mac_address\n", res); | |
| goto err_restore_mtu; | |
| } | |
| } | |
| /* set slave flag before open to prevent IPv6 addrconf */ | |
| slave_dev->flags |= IFF_SLAVE; | |
| /* open the slave since the application closed it */ | |
| res = dev_open(slave_dev); | |
| if (res) { | |
| netdev_dbg(bond_dev, "Opening slave %s failed\n", slave_dev->name); | |
| goto err_restore_mac; | |
| } | |
| slave_dev->priv_flags |= IFF_BONDING; | |
| /* initialize slave stats */ | |
| dev_get_stats(new_slave->dev, &new_slave->slave_stats); | |
| if (bond_is_lb(bond)) { | |
| /* bond_alb_init_slave() must be called before all other stages since | |
| * it might fail and we do not want to have to undo everything | |
| */ | |
| res = bond_alb_init_slave(bond, new_slave); | |
| if (res) | |
| goto err_close; | |
| } | |
| /* If the mode uses primary, then the following is handled by | |
| * bond_change_active_slave(). | |
| */ | |
| if (!bond_uses_primary(bond)) { | |
| /* set promiscuity level to new slave */ | |
| if (bond_dev->flags & IFF_PROMISC) { | |
| res = dev_set_promiscuity(slave_dev, 1); | |
| if (res) | |
| goto err_close; | |
| } | |
| /* set allmulti level to new slave */ | |
| if (bond_dev->flags & IFF_ALLMULTI) { | |
| res = dev_set_allmulti(slave_dev, 1); | |
| if (res) | |
| goto err_close; | |
| } | |
| netif_addr_lock_bh(bond_dev); | |
| dev_mc_sync_multiple(slave_dev, bond_dev); | |
| dev_uc_sync_multiple(slave_dev, bond_dev); | |
| netif_addr_unlock_bh(bond_dev); | |
| } | |
| if (BOND_MODE(bond) == BOND_MODE_8023AD) { | |
| /* add lacpdu mc addr to mc list */ | |
| u8 lacpdu_multicast[ETH_ALEN] = MULTICAST_LACPDU_ADDR; | |
| dev_mc_add(slave_dev, lacpdu_multicast); | |
| } | |
| res = vlan_vids_add_by_dev(slave_dev, bond_dev); | |
| if (res) { | |
| netdev_err(bond_dev, "Couldn't add bond vlan ids to %s\n", | |
| slave_dev->name); | |
| goto err_close; | |
| } | |
| prev_slave = bond_last_slave(bond); | |
| new_slave->delay = 0; | |
| new_slave->link_failure_count = 0; | |
| if (bond_update_speed_duplex(new_slave) && | |
| bond_needs_speed_duplex(bond)) | |
| new_slave->link = BOND_LINK_DOWN; | |
| new_slave->last_rx = jiffies - | |
| (msecs_to_jiffies(bond->params.arp_interval) + 1); | |
| for (i = 0; i < BOND_MAX_ARP_TARGETS; i++) | |
| new_slave->target_last_arp_rx[i] = new_slave->last_rx; | |
| if (bond->params.miimon && !bond->params.use_carrier) { | |
| link_reporting = bond_check_dev_link(bond, slave_dev, 1); | |
| if ((link_reporting == -1) && !bond->params.arp_interval) { | |
| /* miimon is set but a bonded network driver | |
| * does not support ETHTOOL/MII and | |
| * arp_interval is not set. Note: if | |
| * use_carrier is enabled, we will never go | |
| * here (because netif_carrier is always | |
| * supported); thus, we don't need to change | |
| * the messages for netif_carrier. | |
| */ | |
| netdev_warn(bond_dev, "MII and ETHTOOL support not available for interface %s, and arp_interval/arp_ip_target module parameters not specified, thus bonding will not detect link failures! see bonding.txt for details\n", | |
| slave_dev->name); | |
| } else if (link_reporting == -1) { | |
| /* unable get link status using mii/ethtool */ | |
| netdev_warn(bond_dev, "can't get link status from interface %s; the network driver associated with this interface does not support MII or ETHTOOL link status reporting, thus miimon has no effect on this interface\n", | |
| slave_dev->name); | |
| } | |
| } | |
| /* check for initial state */ | |
| new_slave->link = BOND_LINK_NOCHANGE; | |
| if (bond->params.miimon) { | |
| if (bond_check_dev_link(bond, slave_dev, 0) == BMSR_LSTATUS) { | |
| if (bond->params.updelay) { | |
| bond_set_slave_link_state(new_slave, | |
| BOND_LINK_BACK, | |
| BOND_SLAVE_NOTIFY_NOW); | |
| new_slave->delay = bond->params.updelay; | |
| } else { | |
| bond_set_slave_link_state(new_slave, | |
| BOND_LINK_UP, | |
| BOND_SLAVE_NOTIFY_NOW); | |
| } | |
| } else { | |
| bond_set_slave_link_state(new_slave, BOND_LINK_DOWN, | |
| BOND_SLAVE_NOTIFY_NOW); | |
| } | |
| } else if (bond->params.arp_interval) { | |
| bond_set_slave_link_state(new_slave, | |
| (netif_carrier_ok(slave_dev) ? | |
| BOND_LINK_UP : BOND_LINK_DOWN), | |
| BOND_SLAVE_NOTIFY_NOW); | |
| } else { | |
| bond_set_slave_link_state(new_slave, BOND_LINK_UP, | |
| BOND_SLAVE_NOTIFY_NOW); | |
| } | |
| if (new_slave->link != BOND_LINK_DOWN) | |
| new_slave->last_link_up = jiffies; | |
| netdev_dbg(bond_dev, "Initial state of slave_dev is BOND_LINK_%s\n", | |
| new_slave->link == BOND_LINK_DOWN ? "DOWN" : | |
| (new_slave->link == BOND_LINK_UP ? "UP" : "BACK")); | |
| if (bond_uses_primary(bond) && bond->params.primary[0]) { | |
| /* if there is a primary slave, remember it */ | |
| if (strcmp(bond->params.primary, new_slave->dev->name) == 0) { | |
| rcu_assign_pointer(bond->primary_slave, new_slave); | |
| bond->force_primary = true; | |
| } | |
| } | |
| switch (BOND_MODE(bond)) { | |
| case BOND_MODE_ACTIVEBACKUP: | |
| bond_set_slave_inactive_flags(new_slave, | |
| BOND_SLAVE_NOTIFY_NOW); | |
| break; | |
| case BOND_MODE_8023AD: | |
| /* in 802.3ad mode, the internal mechanism | |
| * will activate the slaves in the selected | |
| * aggregator | |
| */ | |
| bond_set_slave_inactive_flags(new_slave, BOND_SLAVE_NOTIFY_NOW); | |
| /* if this is the first slave */ | |
| if (!prev_slave) { | |
| SLAVE_AD_INFO(new_slave)->id = 1; | |
| /* Initialize AD with the number of times that the AD timer is called in 1 second | |
| * can be called only after the mac address of the bond is set | |
| */ | |
| bond_3ad_initialize(bond, 1000/AD_TIMER_INTERVAL); | |
| } else { | |
| SLAVE_AD_INFO(new_slave)->id = | |
| SLAVE_AD_INFO(prev_slave)->id + 1; | |
| } | |
| bond_3ad_bind_slave(new_slave); | |
| break; | |
| case BOND_MODE_TLB: | |
| case BOND_MODE_ALB: | |
| bond_set_active_slave(new_slave); | |
| bond_set_slave_inactive_flags(new_slave, BOND_SLAVE_NOTIFY_NOW); | |
| break; | |
| default: | |
| netdev_dbg(bond_dev, "This slave is always active in trunk mode\n"); | |
| /* always active in trunk mode */ | |
| bond_set_active_slave(new_slave); | |
| /* In trunking mode there is little meaning to curr_active_slave | |
| * anyway (it holds no special properties of the bond device), | |
| * so we can change it without calling change_active_interface() | |
| */ | |
| if (!rcu_access_pointer(bond->curr_active_slave) && | |
| new_slave->link == BOND_LINK_UP) | |
| rcu_assign_pointer(bond->curr_active_slave, new_slave); | |
| break; | |
| } /* switch(bond_mode) */ | |
| #ifdef CONFIG_NET_POLL_CONTROLLER | |
| slave_dev->npinfo = bond->dev->npinfo; | |
| if (slave_dev->npinfo) { | |
| if (slave_enable_netpoll(new_slave)) { | |
| netdev_info(bond_dev, "master_dev is using netpoll, but new slave device does not support netpoll\n"); | |
| res = -EBUSY; | |
| goto err_detach; | |
| } | |
| } | |
| #endif | |
| if (!(bond_dev->features & NETIF_F_LRO)) | |
| dev_disable_lro(slave_dev); | |
| res = netdev_rx_handler_register(slave_dev, bond_handle_frame, | |
| new_slave); | |
| if (res) { | |
| netdev_dbg(bond_dev, "Error %d calling netdev_rx_handler_register\n", res); | |
| goto err_detach; | |
| } | |
| res = bond_master_upper_dev_link(bond, new_slave); | |
| if (res) { | |
| netdev_dbg(bond_dev, "Error %d calling bond_master_upper_dev_link\n", res); | |
| goto err_unregister; | |
| } | |
| res = bond_sysfs_slave_add(new_slave); | |
| if (res) { | |
| netdev_dbg(bond_dev, "Error %d calling bond_sysfs_slave_add\n", res); | |
| goto err_upper_unlink; | |
| } | |
| bond->slave_cnt++; | |
| bond_compute_features(bond); | |
| bond_set_carrier(bond); | |
| if (bond_uses_primary(bond)) { | |
| block_netpoll_tx(); | |
| bond_select_active_slave(bond); | |
| unblock_netpoll_tx(); | |
| } | |
| if (bond_mode_uses_xmit_hash(bond)) | |
| bond_update_slave_arr(bond, NULL); | |
| netdev_info(bond_dev, "Enslaving %s as %s interface with %s link\n", | |
| slave_dev->name, | |
| bond_is_active_slave(new_slave) ? "an active" : "a backup", | |
| new_slave->link != BOND_LINK_DOWN ? "an up" : "a down"); | |
| /* enslave is successful */ | |
| bond_queue_slave_event(new_slave); | |
| return 0; | |
| /* Undo stages on error */ | |
| err_upper_unlink: | |
| bond_upper_dev_unlink(bond, new_slave); | |
| err_unregister: | |
| netdev_rx_handler_unregister(slave_dev); | |
| err_detach: | |
| if (!bond_uses_primary(bond)) | |
| bond_hw_addr_flush(bond_dev, slave_dev); | |
| vlan_vids_del_by_dev(slave_dev, bond_dev); | |
| if (rcu_access_pointer(bond->primary_slave) == new_slave) | |
| RCU_INIT_POINTER(bond->primary_slave, NULL); | |
| if (rcu_access_pointer(bond->curr_active_slave) == new_slave) { | |
| block_netpoll_tx(); | |
| bond_change_active_slave(bond, NULL); | |
| bond_select_active_slave(bond); | |
| unblock_netpoll_tx(); | |
| } | |
| /* either primary_slave or curr_active_slave might've changed */ | |
| synchronize_rcu(); | |
| slave_disable_netpoll(new_slave); | |
| err_close: | |
| slave_dev->priv_flags &= ~IFF_BONDING; | |
| dev_close(slave_dev); | |
| err_restore_mac: | |
| slave_dev->flags &= ~IFF_SLAVE; | |
| if (!bond->params.fail_over_mac || | |
| BOND_MODE(bond) != BOND_MODE_ACTIVEBACKUP) { | |
| /* XXX TODO - fom follow mode needs to change master's | |
| * MAC if this slave's MAC is in use by the bond, or at | |
| * least print a warning. | |
| */ | |
| bond_hw_addr_copy(ss.__data, new_slave->perm_hwaddr, | |
| new_slave->dev->addr_len); | |
| ss.ss_family = slave_dev->type; | |
| dev_set_mac_address(slave_dev, (struct sockaddr *)&ss); | |
| } | |
| err_restore_mtu: | |
| dev_set_mtu(slave_dev, new_slave->original_mtu); | |
| err_free: | |
| bond_free_slave(new_slave); | |
| err_undo_flags: | |
| /* Enslave of first slave has failed and we need to fix master's mac */ | |
| if (!bond_has_slaves(bond)) { | |
| if (ether_addr_equal_64bits(bond_dev->dev_addr, | |
| slave_dev->dev_addr)) | |
| eth_hw_addr_random(bond_dev); | |
| if (bond_dev->type != ARPHRD_ETHER) { | |
| dev_close(bond_dev); | |
| ether_setup(bond_dev); | |
| bond_dev->flags |= IFF_MASTER; | |
| bond_dev->priv_flags &= ~IFF_TX_SKB_SHARING; | |
| } | |
| } | |
| return res; | |
| } | |
| /* Try to release the slave device <slave> from the bond device <master> | |
| * It is legal to access curr_active_slave without a lock because all the function | |
| * is RTNL-locked. If "all" is true it means that the function is being called | |
| * while destroying a bond interface and all slaves are being released. | |
| * | |
| * The rules for slave state should be: | |
| * for Active/Backup: | |
| * Active stays on all backups go down | |
| * for Bonded connections: | |
| * The first up interface should be left on and all others downed. | |
| */ | |
| static int __bond_release_one(struct net_device *bond_dev, | |
| struct net_device *slave_dev, | |
| bool all, bool unregister) | |
| { | |
| struct bonding *bond = netdev_priv(bond_dev); | |
| struct slave *slave, *oldcurrent; | |
| struct sockaddr_storage ss; | |
| int old_flags = bond_dev->flags; | |
| netdev_features_t old_features = bond_dev->features; | |
| /* slave is not a slave or master is not master of this slave */ | |
| if (!(slave_dev->flags & IFF_SLAVE) || | |
| !netdev_has_upper_dev(slave_dev, bond_dev)) { | |
| netdev_dbg(bond_dev, "cannot release %s\n", | |
| slave_dev->name); | |
| return -EINVAL; | |
| } | |
| block_netpoll_tx(); | |
| slave = bond_get_slave_by_dev(bond, slave_dev); | |
| if (!slave) { | |
| /* not a slave of this bond */ | |
| netdev_info(bond_dev, "%s not enslaved\n", | |
| slave_dev->name); | |
| unblock_netpoll_tx(); | |
| return -EINVAL; | |
| } | |
| bond_set_slave_inactive_flags(slave, BOND_SLAVE_NOTIFY_NOW); | |
| bond_sysfs_slave_del(slave); | |
| /* recompute stats just before removing the slave */ | |
| bond_get_stats(bond->dev, &bond->bond_stats); | |
| bond_upper_dev_unlink(bond, slave); | |
| /* unregister rx_handler early so bond_handle_frame wouldn't be called | |
| * for this slave anymore. | |
| */ | |
| netdev_rx_handler_unregister(slave_dev); | |
| if (BOND_MODE(bond) == BOND_MODE_8023AD) | |
| bond_3ad_unbind_slave(slave); | |
| if (bond_mode_uses_xmit_hash(bond)) | |
| bond_update_slave_arr(bond, slave); | |
| netdev_info(bond_dev, "Releasing %s interface %s\n", | |
| bond_is_active_slave(slave) ? "active" : "backup", | |
| slave_dev->name); | |
| oldcurrent = rcu_access_pointer(bond->curr_active_slave); | |
| RCU_INIT_POINTER(bond->current_arp_slave, NULL); | |
| if (!all && (!bond->params.fail_over_mac || | |
| BOND_MODE(bond) != BOND_MODE_ACTIVEBACKUP)) { | |
| if (ether_addr_equal_64bits(bond_dev->dev_addr, slave->perm_hwaddr) && | |
| bond_has_slaves(bond)) | |
| netdev_warn(bond_dev, "the permanent HWaddr of %s - %pM - is still in use by %s - set the HWaddr of %s to a different address to avoid conflicts\n", | |
| slave_dev->name, slave->perm_hwaddr, | |
| bond_dev->name, slave_dev->name); | |
| } | |
| if (rtnl_dereference(bond->primary_slave) == slave) | |
| RCU_INIT_POINTER(bond->primary_slave, NULL); | |
| if (oldcurrent == slave) | |
| bond_change_active_slave(bond, NULL); | |
| if (bond_is_lb(bond)) { | |
| /* Must be called only after the slave has been | |
| * detached from the list and the curr_active_slave | |
| * has been cleared (if our_slave == old_current), | |
| * but before a new active slave is selected. | |
| */ | |
| bond_alb_deinit_slave(bond, slave); | |
| } | |
| if (all) { | |
| RCU_INIT_POINTER(bond->curr_active_slave, NULL); | |
| } else if (oldcurrent == slave) { | |
| /* Note that we hold RTNL over this sequence, so there | |
| * is no concern that another slave add/remove event | |
| * will interfere. | |
| */ | |
| bond_select_active_slave(bond); | |
| } | |
| if (!bond_has_slaves(bond)) { | |
| bond_set_carrier(bond); | |
| eth_hw_addr_random(bond_dev); | |
| } | |
| unblock_netpoll_tx(); | |
| synchronize_rcu(); | |
| bond->slave_cnt--; | |
| if (!bond_has_slaves(bond)) { | |
| call_netdevice_notifiers(NETDEV_CHANGEADDR, bond->dev); | |
| call_netdevice_notifiers(NETDEV_RELEASE, bond->dev); | |
| } | |
| bond_compute_features(bond); | |
| if (!(bond_dev->features & NETIF_F_VLAN_CHALLENGED) && | |
| (old_features & NETIF_F_VLAN_CHALLENGED)) | |
| netdev_info(bond_dev, "last VLAN challenged slave %s left bond %s - VLAN blocking is removed\n", | |
| slave_dev->name, bond_dev->name); | |
| vlan_vids_del_by_dev(slave_dev, bond_dev); | |
| /* If the mode uses primary, then this case was handled above by | |
| * bond_change_active_slave(..., NULL) | |
| */ | |
| if (!bond_uses_primary(bond)) { | |
| /* unset promiscuity level from slave | |
| * NOTE: The NETDEV_CHANGEADDR call above may change the value | |
| * of the IFF_PROMISC flag in the bond_dev, but we need the | |
| * value of that flag before that change, as that was the value | |
| * when this slave was attached, so we cache at the start of the | |
| * function and use it here. Same goes for ALLMULTI below | |
| */ | |
| if (old_flags & IFF_PROMISC) | |
| dev_set_promiscuity(slave_dev, -1); | |
| /* unset allmulti level from slave */ | |
| if (old_flags & IFF_ALLMULTI) | |
| dev_set_allmulti(slave_dev, -1); | |
| bond_hw_addr_flush(bond_dev, slave_dev); | |
| } | |
| slave_disable_netpoll(slave); | |
| /* close slave before restoring its mac address */ | |
| dev_close(slave_dev); | |
| if (bond->params.fail_over_mac != BOND_FOM_ACTIVE || | |
| BOND_MODE(bond) != BOND_MODE_ACTIVEBACKUP) { | |
| /* restore original ("permanent") mac address */ | |
| bond_hw_addr_copy(ss.__data, slave->perm_hwaddr, | |
| slave->dev->addr_len); | |
| ss.ss_family = slave_dev->type; | |
| dev_set_mac_address(slave_dev, (struct sockaddr *)&ss); | |
| } | |
| if (unregister) | |
| __dev_set_mtu(slave_dev, slave->original_mtu); | |
| else | |
| dev_set_mtu(slave_dev, slave->original_mtu); | |
| slave_dev->priv_flags &= ~IFF_BONDING; | |
| bond_free_slave(slave); | |
| return 0; | |
| } | |
| /* A wrapper used because of ndo_del_link */ | |
| int bond_release(struct net_device *bond_dev, struct net_device *slave_dev) | |
| { | |
| return __bond_release_one(bond_dev, slave_dev, false, false); | |
| } | |
| /* First release a slave and then destroy the bond if no more slaves are left. | |
| * Must be under rtnl_lock when this function is called. | |
| */ | |
| static int bond_release_and_destroy(struct net_device *bond_dev, | |
| struct net_device *slave_dev) | |
| { | |
| struct bonding *bond = netdev_priv(bond_dev); | |
| int ret; | |
| ret = __bond_release_one(bond_dev, slave_dev, false, true); | |
| if (ret == 0 && !bond_has_slaves(bond)) { | |
| bond_dev->priv_flags |= IFF_DISABLE_NETPOLL; | |
| netdev_info(bond_dev, "Destroying bond %s\n", | |
| bond_dev->name); | |
| bond_remove_proc_entry(bond); | |
| unregister_netdevice(bond_dev); | |
| } | |
| return ret; | |
| } | |
| static void bond_info_query(struct net_device *bond_dev, struct ifbond *info) | |
| { | |
| struct bonding *bond = netdev_priv(bond_dev); | |
| bond_fill_ifbond(bond, info); | |
| } | |
| static int bond_slave_info_query(struct net_device *bond_dev, struct ifslave *info) | |
| { | |
| struct bonding *bond = netdev_priv(bond_dev); | |
| struct list_head *iter; | |
| int i = 0, res = -ENODEV; | |
| struct slave *slave; | |
| bond_for_each_slave(bond, slave, iter) { | |
| if (i++ == (int)info->slave_id) { | |
| res = 0; | |
| bond_fill_ifslave(slave, info); | |
| break; | |
| } | |
| } | |
| return res; | |
| } | |
| /*-------------------------------- Monitoring -------------------------------*/ | |
| /* called with rcu_read_lock() */ | |
| static int bond_miimon_inspect(struct bonding *bond) | |
| { | |
| int link_state, commit = 0; | |
| struct list_head *iter; | |
| struct slave *slave; | |
| bool ignore_updelay; | |
| ignore_updelay = !rcu_dereference(bond->curr_active_slave); | |
| bond_for_each_slave_rcu(bond, slave, iter) { | |
| slave->new_link = BOND_LINK_NOCHANGE; | |
| slave->link_new_state = slave->link; | |
| link_state = bond_check_dev_link(bond, slave->dev, 0); | |
| switch (slave->link) { | |
| case BOND_LINK_UP: | |
| if (link_state) | |
| continue; | |
| bond_propose_link_state(slave, BOND_LINK_FAIL); | |
| commit++; | |
| slave->delay = bond->params.downdelay; | |
| if (slave->delay) { | |
| netdev_info(bond->dev, "link status down for %sinterface %s, disabling it in %d ms\n", | |
| (BOND_MODE(bond) == | |
| BOND_MODE_ACTIVEBACKUP) ? | |
| (bond_is_active_slave(slave) ? | |
| "active " : "backup ") : "", | |
| slave->dev->name, | |
| bond->params.downdelay * bond->params.miimon); | |
| } | |
| /*FALLTHRU*/ | |
| case BOND_LINK_FAIL: | |
| if (link_state) { | |
| /* recovered before downdelay expired */ | |
| bond_propose_link_state(slave, BOND_LINK_UP); | |
| slave->last_link_up = jiffies; | |
| netdev_info(bond->dev, "link status up again after %d ms for interface %s\n", | |
| (bond->params.downdelay - slave->delay) * | |
| bond->params.miimon, | |
| slave->dev->name); | |
| commit++; | |
| continue; | |
| } | |
| if (slave->delay <= 0) { | |
| slave->new_link = BOND_LINK_DOWN; | |
| commit++; | |
| continue; | |
| } | |
| slave->delay--; | |
| break; | |
| case BOND_LINK_DOWN: | |
| if (!link_state) | |
| continue; | |
| bond_propose_link_state(slave, BOND_LINK_BACK); | |
| commit++; | |
| slave->delay = bond->params.updelay; | |
| if (slave->delay) { | |
| netdev_info(bond->dev, "link status up for interface %s, enabling it in %d ms\n", | |
| slave->dev->name, | |
| ignore_updelay ? 0 : | |
| bond->params.updelay * | |
| bond->params.miimon); | |
| } | |
| /*FALLTHRU*/ | |
| case BOND_LINK_BACK: | |
| if (!link_state) { | |
| bond_propose_link_state(slave, BOND_LINK_DOWN); | |
| netdev_info(bond->dev, "link status down again after %d ms for interface %s\n", | |
| (bond->params.updelay - slave->delay) * | |
| bond->params.miimon, | |
| slave->dev->name); | |
| commit++; | |
| continue; | |
| } | |
| if (ignore_updelay) | |
| slave->delay = 0; | |
| if (slave->delay <= 0) { | |
| slave->new_link = BOND_LINK_UP; | |
| commit++; | |
| ignore_updelay = false; | |
| continue; | |
| } | |
| slave->delay--; | |
| break; | |
| } | |
| } | |
| return commit; | |
| } | |
| static void bond_miimon_commit(struct bonding *bond) | |
| { | |
| struct list_head *iter; | |
| struct slave *slave, *primary; | |
| bond_for_each_slave(bond, slave, iter) { | |
| switch (slave->new_link) { | |
| case BOND_LINK_NOCHANGE: | |
| continue; | |
| case BOND_LINK_UP: | |
| if (bond_update_speed_duplex(slave) && | |
| bond_needs_speed_duplex(bond)) { | |
| slave->link = BOND_LINK_DOWN; | |
| if (net_ratelimit()) | |
| netdev_warn(bond->dev, | |
| "failed to get link speed/duplex for %s\n", | |
| slave->dev->name); | |
| continue; | |
| } | |
| bond_set_slave_link_state(slave, BOND_LINK_UP, | |
| BOND_SLAVE_NOTIFY_NOW); | |
| slave->last_link_up = jiffies; | |
| primary = rtnl_dereference(bond->primary_slave); | |
| if (BOND_MODE(bond) == BOND_MODE_8023AD) { | |
| /* prevent it from being the active one */ | |
| bond_set_backup_slave(slave); | |
| } else if (BOND_MODE(bond) != BOND_MODE_ACTIVEBACKUP) { | |
| /* make it immediately active */ | |
| bond_set_active_slave(slave); | |
| } else if (slave != primary) { | |
| /* prevent it from being the active one */ | |
| bond_set_backup_slave(slave); | |
| } | |
| netdev_info(bond->dev, "link status definitely up for interface %s, %u Mbps %s duplex\n", | |
| slave->dev->name, | |
| slave->speed == SPEED_UNKNOWN ? 0 : slave->speed, | |
| slave->duplex ? "full" : "half"); | |
| /* notify ad that the link status has changed */ | |
| if (BOND_MODE(bond) == BOND_MODE_8023AD) | |
| bond_3ad_handle_link_change(slave, BOND_LINK_UP); | |
| if (bond_is_lb(bond)) | |
| bond_alb_handle_link_change(bond, slave, | |
| BOND_LINK_UP); | |
| if (BOND_MODE(bond) == BOND_MODE_XOR) | |
| bond_update_slave_arr(bond, NULL); | |
| if (!bond->curr_active_slave || slave == primary) | |
| goto do_failover; | |
| continue; | |
| case BOND_LINK_DOWN: | |
| if (slave->link_failure_count < UINT_MAX) | |
| slave->link_failure_count++; | |
| bond_set_slave_link_state(slave, BOND_LINK_DOWN, | |
| BOND_SLAVE_NOTIFY_NOW); | |
| if (BOND_MODE(bond) == BOND_MODE_ACTIVEBACKUP || | |
| BOND_MODE(bond) == BOND_MODE_8023AD) | |
| bond_set_slave_inactive_flags(slave, | |
| BOND_SLAVE_NOTIFY_NOW); | |
| netdev_info(bond->dev, "link status definitely down for interface %s, disabling it\n", | |
| slave->dev->name); | |
| if (BOND_MODE(bond) == BOND_MODE_8023AD) | |
| bond_3ad_handle_link_change(slave, | |
| BOND_LINK_DOWN); | |
| if (bond_is_lb(bond)) | |
| bond_alb_handle_link_change(bond, slave, | |
| BOND_LINK_DOWN); | |
| if (BOND_MODE(bond) == BOND_MODE_XOR) | |
| bond_update_slave_arr(bond, NULL); | |
| if (slave == rcu_access_pointer(bond->curr_active_slave)) | |
| goto do_failover; | |
| continue; | |
| default: | |
| netdev_err(bond->dev, "invalid new link %d on slave %s\n", | |
| slave->new_link, slave->dev->name); | |
| slave->new_link = BOND_LINK_NOCHANGE; | |
| continue; | |
| } | |
| do_failover: | |
| block_netpoll_tx(); | |
| bond_select_active_slave(bond); | |
| unblock_netpoll_tx(); | |
| } | |
| bond_set_carrier(bond); | |
| } | |
| /* bond_mii_monitor | |
| * | |
| * Really a wrapper that splits the mii monitor into two phases: an | |
| * inspection, then (if inspection indicates something needs to be done) | |
| * an acquisition of appropriate locks followed by a commit phase to | |
| * implement whatever link state changes are indicated. | |
| */ | |
| static void bond_mii_monitor(struct work_struct *work) | |
| { | |
| struct bonding *bond = container_of(work, struct bonding, | |
| mii_work.work); | |
| bool should_notify_peers = false; | |
| unsigned long delay; | |
| struct slave *slave; | |
| struct list_head *iter; | |
| delay = msecs_to_jiffies(bond->params.miimon); | |
| if (!bond_has_slaves(bond)) | |
| goto re_arm; | |
| rcu_read_lock(); | |
| should_notify_peers = bond_should_notify_peers(bond); | |
| if (bond_miimon_inspect(bond)) { | |
| rcu_read_unlock(); | |
| /* Race avoidance with bond_close cancel of workqueue */ | |
| if (!rtnl_trylock()) { | |
| delay = 1; | |
| should_notify_peers = false; | |
| goto re_arm; | |
| } | |
| bond_for_each_slave(bond, slave, iter) { | |
| bond_commit_link_state(slave, BOND_SLAVE_NOTIFY_LATER); | |
| } | |
| bond_miimon_commit(bond); | |
| rtnl_unlock(); /* might sleep, hold no other locks */ | |
| } else | |
| rcu_read_unlock(); | |
| re_arm: | |
| if (bond->params.miimon) | |
| queue_delayed_work(bond->wq, &bond->mii_work, delay); | |
| if (should_notify_peers) { | |
| if (!rtnl_trylock()) | |
| return; | |
| call_netdevice_notifiers(NETDEV_NOTIFY_PEERS, bond->dev); | |
| rtnl_unlock(); | |
| } | |
| } | |
| static int bond_upper_dev_walk(struct net_device *upper, void *data) | |
| { | |
| __be32 ip = *((__be32 *)data); | |
| return ip == bond_confirm_addr(upper, 0, ip); | |
| } | |
| static bool bond_has_this_ip(struct bonding *bond, __be32 ip) | |
| { | |
| bool ret = false; | |
| if (ip == bond_confirm_addr(bond->dev, 0, ip)) | |
| return true; | |
| rcu_read_lock(); | |
| if (netdev_walk_all_upper_dev_rcu(bond->dev, bond_upper_dev_walk, &ip)) | |
| ret = true; | |
| rcu_read_unlock(); | |
| return ret; | |
| } | |
| /* We go to the (large) trouble of VLAN tagging ARP frames because | |
| * switches in VLAN mode (especially if ports are configured as | |
| * "native" to a VLAN) might not pass non-tagged frames. | |
| */ | |
| static void bond_arp_send(struct net_device *slave_dev, int arp_op, | |
| __be32 dest_ip, __be32 src_ip, | |
| struct bond_vlan_tag *tags) | |
| { | |
| struct sk_buff *skb; | |
| struct bond_vlan_tag *outer_tag = tags; | |
| netdev_dbg(slave_dev, "arp %d on slave %s: dst %pI4 src %pI4\n", | |
| arp_op, slave_dev->name, &dest_ip, &src_ip); | |
| skb = arp_create(arp_op, ETH_P_ARP, dest_ip, slave_dev, src_ip, | |
| NULL, slave_dev->dev_addr, NULL); | |
| if (!skb) { | |
| net_err_ratelimited("ARP packet allocation failed\n"); | |
| return; | |
| } | |
| if (!tags || tags->vlan_proto == VLAN_N_VID) | |
| goto xmit; | |
| tags++; | |
| /* Go through all the tags backwards and add them to the packet */ | |
| while (tags->vlan_proto != VLAN_N_VID) { | |
| if (!tags->vlan_id) { | |
| tags++; | |
| continue; | |
| } | |
| netdev_dbg(slave_dev, "inner tag: proto %X vid %X\n", | |
| ntohs(outer_tag->vlan_proto), tags->vlan_id); | |
| skb = vlan_insert_tag_set_proto(skb, tags->vlan_proto, | |
| tags->vlan_id); | |
| if (!skb) { | |
| net_err_ratelimited("failed to insert inner VLAN tag\n"); | |
| return; | |
| } | |
| tags++; | |
| } | |
| /* Set the outer tag */ | |
| if (outer_tag->vlan_id) { | |
| netdev_dbg(slave_dev, "outer tag: proto %X vid %X\n", | |
| ntohs(outer_tag->vlan_proto), outer_tag->vlan_id); | |
| __vlan_hwaccel_put_tag(skb, outer_tag->vlan_proto, | |
| outer_tag->vlan_id); | |
| } | |
| xmit: | |
| arp_xmit(skb); | |
| } | |
| /* Validate the device path between the @start_dev and the @end_dev. | |
| * The path is valid if the @end_dev is reachable through device | |
| * stacking. | |
| * When the path is validated, collect any vlan information in the | |
| * path. | |
| */ | |
| struct bond_vlan_tag *bond_verify_device_path(struct net_device *start_dev, | |
| struct net_device *end_dev, | |
| int level) | |
| { | |
| struct bond_vlan_tag *tags; | |
| struct net_device *upper; | |
| struct list_head *iter; | |
| if (start_dev == end_dev) { | |
| tags = kzalloc(sizeof(*tags) * (level + 1), GFP_ATOMIC); | |
| if (!tags) | |
| return ERR_PTR(-ENOMEM); | |
| tags[level].vlan_proto = VLAN_N_VID; | |
| return tags; | |
| } | |
| netdev_for_each_upper_dev_rcu(start_dev, upper, iter) { | |
| tags = bond_verify_device_path(upper, end_dev, level + 1); | |
| if (IS_ERR_OR_NULL(tags)) { | |
| if (IS_ERR(tags)) | |
| return tags; | |
| continue; | |
| } | |
| if (is_vlan_dev(upper)) { | |
| tags[level].vlan_proto = vlan_dev_vlan_proto(upper); | |
| tags[level].vlan_id = vlan_dev_vlan_id(upper); | |
| } | |
| return tags; | |
| } | |
| return NULL; | |
| } | |
| static void bond_arp_send_all(struct bonding *bond, struct slave *slave) | |
| { | |
| struct rtable *rt; | |
| struct bond_vlan_tag *tags; | |
| __be32 *targets = bond->params.arp_targets, addr; | |
| int i; | |
| for (i = 0; i < BOND_MAX_ARP_TARGETS && targets[i]; i++) { | |
| netdev_dbg(bond->dev, "basa: target %pI4\n", &targets[i]); | |
| tags = NULL; | |
| /* Find out through which dev should the packet go */ | |
| rt = ip_route_output(dev_net(bond->dev), targets[i], 0, | |
| RTO_ONLINK, 0); | |
| if (IS_ERR(rt)) { | |
| /* there's no route to target - try to send arp | |
| * probe to generate any traffic (arp_validate=0) | |
| */ | |
| if (bond->params.arp_validate) | |
| net_warn_ratelimited("%s: no route to arp_ip_target %pI4 and arp_validate is set\n", | |
| bond->dev->name, | |
| &targets[i]); | |
| bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i], | |
| 0, tags); | |
| continue; | |
| } | |
| /* bond device itself */ | |
| if (rt->dst.dev == bond->dev) | |
| goto found; | |
| rcu_read_lock(); | |
| tags = bond_verify_device_path(bond->dev, rt->dst.dev, 0); | |
| rcu_read_unlock(); | |
| if (!IS_ERR_OR_NULL(tags)) | |
| goto found; | |
| /* Not our device - skip */ | |
| netdev_dbg(bond->dev, "no path to arp_ip_target %pI4 via rt.dev %s\n", | |
| &targets[i], rt->dst.dev ? rt->dst.dev->name : "NULL"); | |
| ip_rt_put(rt); | |
| continue; | |
| found: | |
| addr = bond_confirm_addr(rt->dst.dev, targets[i], 0); | |
| ip_rt_put(rt); | |
| bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i], | |
| addr, tags); | |
| kfree(tags); | |
| } | |
| } | |
| static void bond_validate_arp(struct bonding *bond, struct slave *slave, __be32 sip, __be32 tip) | |
| { | |
| int i; | |
| if (!sip || !bond_has_this_ip(bond, tip)) { | |
| netdev_dbg(bond->dev, "bva: sip %pI4 tip %pI4 not found\n", | |
| &sip, &tip); | |
| return; | |
| } | |
| i = bond_get_targets_ip(bond->params.arp_targets, sip); | |
| if (i == -1) { | |
| netdev_dbg(bond->dev, "bva: sip %pI4 not found in targets\n", | |
| &sip); | |
| return; | |
| } | |
| slave->last_rx = jiffies; | |
| slave->target_last_arp_rx[i] = jiffies; | |
| } | |
| int bond_arp_rcv(const struct sk_buff *skb, struct bonding *bond, | |
| struct slave *slave) | |
| { | |
| struct arphdr *arp = (struct arphdr *)skb->data; | |
| struct slave *curr_active_slave, *curr_arp_slave; | |
| unsigned char *arp_ptr; | |
| __be32 sip, tip; | |
| int alen, is_arp = skb->protocol == __cpu_to_be16(ETH_P_ARP); | |
| if (!slave_do_arp_validate(bond, slave)) { | |
| if ((slave_do_arp_validate_only(bond) && is_arp) || | |
| !slave_do_arp_validate_only(bond)) | |
| slave->last_rx = jiffies; | |
| return RX_HANDLER_ANOTHER; | |
| } else if (!is_arp) { | |
| return RX_HANDLER_ANOTHER; | |
| } | |
| alen = arp_hdr_len(bond->dev); | |
| netdev_dbg(bond->dev, "bond_arp_rcv: skb->dev %s\n", | |
| skb->dev->name); | |
| if (alen > skb_headlen(skb)) { | |
| arp = kmalloc(alen, GFP_ATOMIC); | |
| if (!arp) | |
| goto out_unlock; | |
| if (skb_copy_bits(skb, 0, arp, alen) < 0) | |
| goto out_unlock; | |
| } | |
| if (arp->ar_hln != bond->dev->addr_len || | |
| skb->pkt_type == PACKET_OTHERHOST || | |
| skb->pkt_type == PACKET_LOOPBACK || | |
| arp->ar_hrd != htons(ARPHRD_ETHER) || | |
| arp->ar_pro != htons(ETH_P_IP) || | |
| arp->ar_pln != 4) | |
| goto out_unlock; | |
| arp_ptr = (unsigned char *)(arp + 1); | |
| arp_ptr += bond->dev->addr_len; | |
| memcpy(&sip, arp_ptr, 4); | |
| arp_ptr += 4 + bond->dev->addr_len; | |
| memcpy(&tip, arp_ptr, 4); | |
| netdev_dbg(bond->dev, "bond_arp_rcv: %s/%d av %d sv %d sip %pI4 tip %pI4\n", | |
| slave->dev->name, bond_slave_state(slave), | |
| bond->params.arp_validate, slave_do_arp_validate(bond, slave), | |
| &sip, &tip); | |
| curr_active_slave = rcu_dereference(bond->curr_active_slave); | |
| curr_arp_slave = rcu_dereference(bond->current_arp_slave); | |
| /* We 'trust' the received ARP enough to validate it if: | |
| * | |
| * (a) the slave receiving the ARP is active (which includes the | |
| * current ARP slave, if any), or | |
| * | |
| * (b) the receiving slave isn't active, but there is a currently | |
| * active slave and it received valid arp reply(s) after it became | |
| * the currently active slave, or | |
| * | |
| * (c) there is an ARP slave that sent an ARP during the prior ARP | |
| * interval, and we receive an ARP reply on any slave. We accept | |
| * these because switch FDB update delays may deliver the ARP | |
| * reply to a slave other than the sender of the ARP request. | |
| * | |
| * Note: for (b), backup slaves are receiving the broadcast ARP | |
| * request, not a reply. This request passes from the sending | |
| * slave through the L2 switch(es) to the receiving slave. Since | |
| * this is checking the request, sip/tip are swapped for | |
| * validation. | |
| * | |
| * This is done to avoid endless looping when we can't reach the | |
| * arp_ip_target and fool ourselves with our own arp requests. | |
| */ | |
| if (bond_is_active_slave(slave)) | |
| bond_validate_arp(bond, slave, sip, tip); | |
| else if (curr_active_slave && | |
| time_after(slave_last_rx(bond, curr_active_slave), | |
| curr_active_slave->last_link_up)) | |
| bond_validate_arp(bond, slave, tip, sip); | |
| else if (curr_arp_slave && (arp->ar_op == htons(ARPOP_REPLY)) && | |
| bond_time_in_interval(bond, | |
| dev_trans_start(curr_arp_slave->dev), 1)) | |
| bond_validate_arp(bond, slave, sip, tip); | |
| out_unlock: | |
| if (arp != (struct arphdr *)skb->data) | |
| kfree(arp); | |
| return RX_HANDLER_ANOTHER; | |
| } | |
| /* function to verify if we're in the arp_interval timeslice, returns true if | |
| * (last_act - arp_interval) <= jiffies <= (last_act + mod * arp_interval + | |
| * arp_interval/2) . the arp_interval/2 is needed for really fast networks. | |
| */ | |
| static bool bond_time_in_interval(struct bonding *bond, unsigned long last_act, | |
| int mod) | |
| { | |
| int delta_in_ticks = msecs_to_jiffies(bond->params.arp_interval); | |
| return time_in_range(jiffies, | |
| last_act - delta_in_ticks, | |
| last_act + mod * delta_in_ticks + delta_in_ticks/2); | |
| } | |
| /* This function is called regularly to monitor each slave's link | |
| * ensuring that traffic is being sent and received when arp monitoring | |
| * is used in load-balancing mode. if the adapter has been dormant, then an | |
| * arp is transmitted to generate traffic. see activebackup_arp_monitor for | |
| * arp monitoring in active backup mode. | |
| */ | |
| static void bond_loadbalance_arp_mon(struct bonding *bond) | |
| { | |
| struct slave *slave, *oldcurrent; | |
| struct list_head *iter; | |
| int do_failover = 0, slave_state_changed = 0; | |
| if (!bond_has_slaves(bond)) | |
| goto re_arm; | |
| rcu_read_lock(); | |
| oldcurrent = rcu_dereference(bond->curr_active_slave); | |
| /* see if any of the previous devices are up now (i.e. they have | |
| * xmt and rcv traffic). the curr_active_slave does not come into | |
| * the picture unless it is null. also, slave->last_link_up is not | |
| * needed here because we send an arp on each slave and give a slave | |
| * as long as it needs to get the tx/rx within the delta. | |
| * TODO: what about up/down delay in arp mode? it wasn't here before | |
| * so it can wait | |
| */ | |
| bond_for_each_slave_rcu(bond, slave, iter) { | |
| unsigned long trans_start = dev_trans_start(slave->dev); | |
| slave->new_link = BOND_LINK_NOCHANGE; | |
| if (slave->link != BOND_LINK_UP) { | |
| if (bond_time_in_interval(bond, trans_start, 1) && | |
| bond_time_in_interval(bond, slave->last_rx, 1)) { | |
| slave->new_link = BOND_LINK_UP; | |
| slave_state_changed = 1; | |
| /* primary_slave has no meaning in round-robin | |
| * mode. the window of a slave being up and | |
| * curr_active_slave being null after enslaving | |
| * is closed. | |
| */ | |
| if (!oldcurrent) { | |
| netdev_info(bond->dev, "link status definitely up for interface %s\n", | |
| slave->dev->name); | |
| do_failover = 1; | |
| } else { | |
| netdev_info(bond->dev, "interface %s is now up\n", | |
| slave->dev->name); | |
| } | |
| } | |
| } else { | |
| /* slave->link == BOND_LINK_UP */ | |
| /* not all switches will respond to an arp request | |
| * when the source ip is 0, so don't take the link down | |
| * if we don't know our ip yet | |
| */ | |
| if (!bond_time_in_interval(bond, trans_start, 2) || | |
| !bond_time_in_interval(bond, slave->last_rx, 2)) { | |
| slave->new_link = BOND_LINK_DOWN; | |
| slave_state_changed = 1; | |
| if (slave->link_failure_count < UINT_MAX) | |
| slave->link_failure_count++; | |
| netdev_info(bond->dev, "interface %s is now down\n", | |
| slave->dev->name); | |
| if (slave == oldcurrent) | |
| do_failover = 1; | |
| } | |
| } | |
| /* note: if switch is in round-robin mode, all links | |
| * must tx arp to ensure all links rx an arp - otherwise | |
| * links may oscillate or not come up at all; if switch is | |
| * in something like xor mode, there is nothing we can | |
| * do - all replies will be rx'ed on same link causing slaves | |
| * to be unstable during low/no traffic periods | |
| */ | |
| if (bond_slave_is_up(slave)) | |
| bond_arp_send_all(bond, slave); | |
| } | |
| rcu_read_unlock(); | |
| if (do_failover || slave_state_changed) { | |
| if (!rtnl_trylock()) | |
| goto re_arm; | |
| bond_for_each_slave(bond, slave, iter) { | |
| if (slave->new_link != BOND_LINK_NOCHANGE) | |
| slave->link = slave->new_link; | |
| } | |
| if (slave_state_changed) { | |
| bond_slave_state_change(bond); | |
| if (BOND_MODE(bond) == BOND_MODE_XOR) | |
| bond_update_slave_arr(bond, NULL); | |
| } | |
| if (do_failover) { | |
| block_netpoll_tx(); | |
| bond_select_active_slave(bond); | |
| unblock_netpoll_tx(); | |
| } | |
| rtnl_unlock(); | |
| } | |
| re_arm: | |
| if (bond->params.arp_interval) | |
| queue_delayed_work(bond->wq, &bond->arp_work, | |
| msecs_to_jiffies(bond->params.arp_interval)); | |
| } | |
| /* Called to inspect slaves for active-backup mode ARP monitor link state | |
| * changes. Sets new_link in slaves to specify what action should take | |
| * place for the slave. Returns 0 if no changes are found, >0 if changes | |
| * to link states must be committed. | |
| * | |
| * Called with rcu_read_lock held. | |
| */ | |
| static int bond_ab_arp_inspect(struct bonding *bond) | |
| { | |
| unsigned long trans_start, last_rx; | |
| struct list_head *iter; | |
| struct slave *slave; | |
| int commit = 0; | |
| bond_for_each_slave_rcu(bond, slave, iter) { | |
| slave->new_link = BOND_LINK_NOCHANGE; | |
| last_rx = slave_last_rx(bond, slave); | |
| if (slave->link != BOND_LINK_UP) { | |
| if (bond_time_in_interval(bond, last_rx, 1)) { | |
| slave->new_link = BOND_LINK_UP; | |
| commit++; | |
| } | |
| continue; | |
| } | |
| /* Give slaves 2*delta after being enslaved or made | |
| * active. This avoids bouncing, as the last receive | |
| * times need a full ARP monitor cycle to be updated. | |
| */ | |
| if (bond_time_in_interval(bond, slave->last_link_up, 2)) | |
| continue; | |
| /* Backup slave is down if: | |
| * - No current_arp_slave AND | |
| * - more than 3*delta since last receive AND | |
| * - the bond has an IP address | |
| * | |
| * Note: a non-null current_arp_slave indicates | |
| * the curr_active_slave went down and we are | |
| * searching for a new one; under this condition | |
| * we only take the curr_active_slave down - this | |
| * gives each slave a chance to tx/rx traffic | |
| * before being taken out | |
| */ | |
| if (!bond_is_active_slave(slave) && | |
| !rcu_access_pointer(bond->current_arp_slave) && | |
| !bond_time_in_interval(bond, last_rx, 3)) { | |
| slave->new_link = BOND_LINK_DOWN; | |
| commit++; | |
| } | |
| /* Active slave is down if: | |
| * - more than 2*delta since transmitting OR | |
| * - (more than 2*delta since receive AND | |
| * the bond has an IP address) | |
| */ | |
| trans_start = dev_trans_start(slave->dev); | |
| if (bond_is_active_slave(slave) && | |
| (!bond_time_in_interval(bond, trans_start, 2) || | |
| !bond_time_in_interval(bond, last_rx, 2))) { | |
| slave->new_link = BOND_LINK_DOWN; | |
| commit++; | |
| } | |
| } | |
| return commit; | |
| } | |
| /* Called to commit link state changes noted by inspection step of | |
| * active-backup mode ARP monitor. | |
| * | |
| * Called with RTNL hold. | |
| */ | |
| static void bond_ab_arp_commit(struct bonding *bond) | |
| { | |
| unsigned long trans_start; | |
| struct list_head *iter; | |
| struct slave *slave; | |
| bond_for_each_slave(bond, slave, iter) { | |
| switch (slave->new_link) { | |
| case BOND_LINK_NOCHANGE: | |
| continue; | |
| case BOND_LINK_UP: | |
| trans_start = dev_trans_start(slave->dev); | |
| if (rtnl_dereference(bond->curr_active_slave) != slave || | |
| (!rtnl_dereference(bond->curr_active_slave) && | |
| bond_time_in_interval(bond, trans_start, 1))) { | |
| struct slave *current_arp_slave; | |
| current_arp_slave = rtnl_dereference(bond->current_arp_slave); | |
| bond_set_slave_link_state(slave, BOND_LINK_UP, | |
| BOND_SLAVE_NOTIFY_NOW); | |
| if (current_arp_slave) { | |
| bond_set_slave_inactive_flags( | |
| current_arp_slave, | |
| BOND_SLAVE_NOTIFY_NOW); | |
| RCU_INIT_POINTER(bond->current_arp_slave, NULL); | |
| } | |
| netdev_info(bond->dev, "link status definitely up for interface %s\n", | |
| slave->dev->name); | |
| if (!rtnl_dereference(bond->curr_active_slave) || | |
| slave == rtnl_dereference(bond->primary_slave)) | |
| goto do_failover; | |
| } | |
| continue; | |
| case BOND_LINK_DOWN: | |
| if (slave->link_failure_count < UINT_MAX) | |
| slave->link_failure_count++; | |
| bond_set_slave_link_state(slave, BOND_LINK_DOWN, | |
| BOND_SLAVE_NOTIFY_NOW); | |
| bond_set_slave_inactive_flags(slave, | |
| BOND_SLAVE_NOTIFY_NOW); | |
| netdev_info(bond->dev, "link status definitely down for interface %s, disabling it\n", | |
| slave->dev->name); | |
| if (slave == rtnl_dereference(bond->curr_active_slave)) { | |
| RCU_INIT_POINTER(bond->current_arp_slave, NULL); | |
| goto do_failover; | |
| } | |
| continue; | |
| default: | |
| netdev_err(bond->dev, "impossible: new_link %d on slave %s\n", | |
| slave->new_link, slave->dev->name); | |
| continue; | |
| } | |
| do_failover: | |
| block_netpoll_tx(); | |
| bond_select_active_slave(bond); | |
| unblock_netpoll_tx(); | |
| } | |
| bond_set_carrier(bond); | |
| } | |
| /* Send ARP probes for active-backup mode ARP monitor. | |
| * | |
| * Called with rcu_read_lock held. | |
| */ | |
| static bool bond_ab_arp_probe(struct bonding *bond) | |
| { | |
| struct slave *slave, *before = NULL, *new_slave = NULL, | |
| *curr_arp_slave = rcu_dereference(bond->current_arp_slave), | |
| *curr_active_slave = rcu_dereference(bond->curr_active_slave); | |
| struct list_head *iter; | |
| bool found = false; | |
| bool should_notify_rtnl = BOND_SLAVE_NOTIFY_LATER; | |
| if (curr_arp_slave && curr_active_slave) | |
| netdev_info(bond->dev, "PROBE: c_arp %s && cas %s BAD\n", | |
| curr_arp_slave->dev->name, | |
| curr_active_slave->dev->name); | |
| if (curr_active_slave) { | |
| bond_arp_send_all(bond, curr_active_slave); | |
| return should_notify_rtnl; | |
| } | |
| /* if we don't have a curr_active_slave, search for the next available | |
| * backup slave from the current_arp_slave and make it the candidate | |
| * for becoming the curr_active_slave | |
| */ | |
| if (!curr_arp_slave) { | |
| curr_arp_slave = bond_first_slave_rcu(bond); | |
| if (!curr_arp_slave) | |
| return should_notify_rtnl; | |
| } | |
| bond_set_slave_inactive_flags(curr_arp_slave, BOND_SLAVE_NOTIFY_LATER); | |
| bond_for_each_slave_rcu(bond, slave, iter) { | |
| if (!found && !before && bond_slave_is_up(slave)) | |
| before = slave; | |
| if (found && !new_slave && bond_slave_is_up(slave)) | |
| new_slave = slave; | |
| /* if the link state is up at this point, we | |
| * mark it down - this can happen if we have | |
| * simultaneous link failures and | |
| * reselect_active_interface doesn't make this | |
| * one the current slave so it is still marked | |
| * up when it is actually down | |
| */ | |
| if (!bond_slave_is_up(slave) && slave->link == BOND_LINK_UP) { | |
| bond_set_slave_link_state(slave, BOND_LINK_DOWN, | |
| BOND_SLAVE_NOTIFY_LATER); | |
| if (slave->link_failure_count < UINT_MAX) | |
| slave->link_failure_count++; | |
| bond_set_slave_inactive_flags(slave, | |
| BOND_SLAVE_NOTIFY_LATER); | |
| netdev_info(bond->dev, "backup interface %s is now down\n", | |
| slave->dev->name); | |
| } | |
| if (slave == curr_arp_slave) | |
| found = true; | |
| } | |
| if (!new_slave && before) | |
| new_slave = before; | |
| if (!new_slave) | |
| goto check_state; | |
| bond_set_slave_link_state(new_slave, BOND_LINK_BACK, | |
| BOND_SLAVE_NOTIFY_LATER); | |
| bond_set_slave_active_flags(new_slave, BOND_SLAVE_NOTIFY_LATER); | |
| bond_arp_send_all(bond, new_slave); | |
| new_slave->last_link_up = jiffies; | |
| rcu_assign_pointer(bond->current_arp_slave, new_slave); | |
| check_state: | |
| bond_for_each_slave_rcu(bond, slave, iter) { | |
| if (slave->should_notify || slave->should_notify_link) { | |
| should_notify_rtnl = BOND_SLAVE_NOTIFY_NOW; | |
| break; | |
| } | |
| } | |
| return should_notify_rtnl; | |
| } | |
| static void bond_activebackup_arp_mon(struct bonding *bond) | |
| { | |
| bool should_notify_peers = false; | |
| bool should_notify_rtnl = false; | |
| int delta_in_ticks; | |
| delta_in_ticks = msecs_to_jiffies(bond->params.arp_interval); | |
| if (!bond_has_slaves(bond)) | |
| goto re_arm; | |
| rcu_read_lock(); | |
| should_notify_peers = bond_should_notify_peers(bond); | |
| if (bond_ab_arp_inspect(bond)) { | |
| rcu_read_unlock(); | |
| /* Race avoidance with bond_close flush of workqueue */ | |
| if (!rtnl_trylock()) { | |
| delta_in_ticks = 1; | |
| should_notify_peers = false; | |
| goto re_arm; | |
| } | |
| bond_ab_arp_commit(bond); | |
| rtnl_unlock(); | |
| rcu_read_lock(); | |
| } | |
| should_notify_rtnl = bond_ab_arp_probe(bond); | |
| rcu_read_unlock(); | |
| re_arm: | |
| if (bond->params.arp_interval) | |
| queue_delayed_work(bond->wq, &bond->arp_work, delta_in_ticks); | |
| if (should_notify_peers || should_notify_rtnl) { | |
| if (!rtnl_trylock()) | |
| return; | |
| if (should_notify_peers) | |
| call_netdevice_notifiers(NETDEV_NOTIFY_PEERS, | |
| bond->dev); | |
| if (should_notify_rtnl) { | |
| bond_slave_state_notify(bond); | |
| bond_slave_link_notify(bond); | |
| } | |
| rtnl_unlock(); | |
| } | |
| } | |
| static void bond_arp_monitor(struct work_struct *work) | |
| { | |
| struct bonding *bond = container_of(work, struct bonding, | |
| arp_work.work); | |
| if (BOND_MODE(bond) == BOND_MODE_ACTIVEBACKUP) | |
| bond_activebackup_arp_mon(bond); | |
| else | |
| bond_loadbalance_arp_mon(bond); | |
| } | |
| /*-------------------------- netdev event handling --------------------------*/ | |
| /* Change device name */ | |
| static int bond_event_changename(struct bonding *bond) | |
| { | |
| bond_remove_proc_entry(bond); | |
| bond_create_proc_entry(bond); | |
| bond_debug_reregister(bond); | |
| return NOTIFY_DONE; | |
| } | |
| static int bond_master_netdev_event(unsigned long event, | |
| struct net_device *bond_dev) | |
| { | |
| struct bonding *event_bond = netdev_priv(bond_dev); | |
| switch (event) { | |
| case NETDEV_CHANGENAME: | |
| return bond_event_changename(event_bond); | |
| case NETDEV_UNREGISTER: | |
| bond_remove_proc_entry(event_bond); | |
| break; | |
| case NETDEV_REGISTER: | |
| bond_create_proc_entry(event_bond); | |
| break; | |
| case NETDEV_NOTIFY_PEERS: | |
| if (event_bond->send_peer_notif) | |
| event_bond->send_peer_notif--; | |
| break; | |
| default: | |
| break; | |
| } | |
| return NOTIFY_DONE; | |
| } | |
| static int bond_slave_netdev_event(unsigned long event, | |
| struct net_device *slave_dev) | |
| { | |
| struct slave *slave = bond_slave_get_rtnl(slave_dev), *primary; | |
| struct bonding *bond; | |
| struct net_device *bond_dev; | |
| /* A netdev event can be generated while enslaving a device | |
| * before netdev_rx_handler_register is called in which case | |
| * slave will be NULL | |
| */ | |
| if (!slave) | |
| return NOTIFY_DONE; | |
| bond_dev = slave->bond->dev; | |
| bond = slave->bond; | |
| primary = rtnl_dereference(bond->primary_slave); | |
| switch (event) { | |
| case NETDEV_UNREGISTER: | |
| if (bond_dev->type != ARPHRD_ETHER) | |
| bond_release_and_destroy(bond_dev, slave_dev); | |
| else | |
| __bond_release_one(bond_dev, slave_dev, false, true); | |
| break; | |
| case NETDEV_UP: | |
| case NETDEV_CHANGE: | |
| bond_update_speed_duplex(slave); | |
| if (BOND_MODE(bond) == BOND_MODE_8023AD) | |
| bond_3ad_adapter_speed_duplex_changed(slave); | |
| /* Fallthrough */ | |
| case NETDEV_DOWN: | |
| /* Refresh slave-array if applicable! | |
| * If the setup does not use miimon or arpmon (mode-specific!), | |
| * then these events will not cause the slave-array to be | |
| * refreshed. This will cause xmit to use a slave that is not | |
| * usable. Avoid such situation by refeshing the array at these | |
| * events. If these (miimon/arpmon) parameters are configured | |
| * then array gets refreshed twice and that should be fine! | |
| */ | |
| if (bond_mode_uses_xmit_hash(bond)) | |
| bond_update_slave_arr(bond, NULL); | |
| break; | |
| case NETDEV_CHANGEMTU: | |
| /* TODO: Should slaves be allowed to | |
| * independently alter their MTU? For | |
| * an active-backup bond, slaves need | |
| * not be the same type of device, so | |
| * MTUs may vary. For other modes, | |
| * slaves arguably should have the | |
| * same MTUs. To do this, we'd need to | |
| * take over the slave's change_mtu | |
| * function for the duration of their | |
| * servitude. | |
| */ | |
| break; | |
| case NETDEV_CHANGENAME: | |
| /* we don't care if we don't have primary set */ | |
| if (!bond_uses_primary(bond) || | |
| !bond->params.primary[0]) | |
| break; | |
| if (slave == primary) { | |
| /* slave's name changed - he's no longer primary */ | |
| RCU_INIT_POINTER(bond->primary_slave, NULL); | |
| } else if (!strcmp(slave_dev->name, bond->params.primary)) { | |
| /* we have a new primary slave */ | |
| rcu_assign_pointer(bond->primary_slave, slave); | |
| } else { /* we didn't change primary - exit */ | |
| break; | |
| } | |
| netdev_info(bond->dev, "Primary slave changed to %s, reselecting active slave\n", | |
| primary ? slave_dev->name : "none"); | |
| block_netpoll_tx(); | |
| bond_select_active_slave(bond); | |
| unblock_netpoll_tx(); | |
| break; | |
| case NETDEV_FEAT_CHANGE: | |
| bond_compute_features(bond); | |
| break; | |
| case NETDEV_RESEND_IGMP: | |
| /* Propagate to master device */ | |
| call_netdevice_notifiers(event, slave->bond->dev); | |
| break; | |
| default: | |
| break; | |
| } | |
| return NOTIFY_DONE; | |
| } | |
| /* bond_netdev_event: handle netdev notifier chain events. | |
| * | |
| * This function receives events for the netdev chain. The caller (an | |
| * ioctl handler calling blocking_notifier_call_chain) holds the necessary | |
| * locks for us to safely manipulate the slave devices (RTNL lock, | |
| * dev_probe_lock). | |
| */ | |
| static int bond_netdev_event(struct notifier_block *this, | |
| unsigned long event, void *ptr) | |
| { | |
| struct net_device *event_dev = netdev_notifier_info_to_dev(ptr); | |
| netdev_dbg(event_dev, "event: %lx\n", event); | |
| if (!(event_dev->priv_flags & IFF_BONDING)) | |
| return NOTIFY_DONE; | |
| if (event_dev->flags & IFF_MASTER) { | |
| netdev_dbg(event_dev, "IFF_MASTER\n"); | |
| return bond_master_netdev_event(event, event_dev); | |
| } | |
| if (event_dev->flags & IFF_SLAVE) { | |
| netdev_dbg(event_dev, "IFF_SLAVE\n"); | |
| return bond_slave_netdev_event(event, event_dev); | |
| } | |
| return NOTIFY_DONE; | |
| } | |
| static struct notifier_block bond_netdev_notifier = { | |
| .notifier_call = bond_netdev_event, | |
| }; | |
| /*---------------------------- Hashing Policies -----------------------------*/ | |
| /* L2 hash helper */ | |
| static inline u32 bond_eth_hash(struct sk_buff *skb) | |
| { | |
| struct ethhdr *ep, hdr_tmp; | |
| ep = skb_header_pointer(skb, 0, sizeof(hdr_tmp), &hdr_tmp); | |
| if (ep) | |
| return ep->h_dest[5] ^ ep->h_source[5] ^ ep->h_proto; | |
| return 0; | |
| } | |
| /* Extract the appropriate headers based on bond's xmit policy */ | |
| static bool bond_flow_dissect(struct bonding *bond, struct sk_buff *skb, | |
| struct flow_keys *fk) | |
| { | |
| const struct ipv6hdr *iph6; | |
| const struct iphdr *iph; | |
| int noff, proto = -1; | |
| if (bond->params.xmit_policy > BOND_XMIT_POLICY_LAYER23) | |
| return skb_flow_dissect_flow_keys(skb, fk, 0); | |
| fk->ports.ports = 0; | |
| noff = skb_network_offset(skb); | |
| if (skb->protocol == htons(ETH_P_IP)) { | |
| if (unlikely(!pskb_may_pull(skb, noff + sizeof(*iph)))) | |
| return false; | |
| iph = ip_hdr(skb); | |
| iph_to_flow_copy_v4addrs(fk, iph); | |
| noff += iph->ihl << 2; | |
| if (!ip_is_fragment(iph)) | |
| proto = iph->protocol; | |
| } else if (skb->protocol == htons(ETH_P_IPV6)) { | |
| if (unlikely(!pskb_may_pull(skb, noff + sizeof(*iph6)))) | |
| return false; | |
| iph6 = ipv6_hdr(skb); | |
| iph_to_flow_copy_v6addrs(fk, iph6); | |
| noff += sizeof(*iph6); | |
| proto = iph6->nexthdr; | |
| } else { | |
| return false; | |
| } | |
| if (bond->params.xmit_policy == BOND_XMIT_POLICY_LAYER34 && proto >= 0) | |
| fk->ports.ports = skb_flow_get_ports(skb, noff, proto); | |
| return true; | |
| } | |
| /** | |
| * bond_xmit_hash - generate a hash value based on the xmit policy | |
| * @bond: bonding device | |
| * @skb: buffer to use for headers | |
| * | |
| * This function will extract the necessary headers from the skb buffer and use | |
| * them to generate a hash based on the xmit_policy set in the bonding device | |
| */ | |
| u32 bond_xmit_hash(struct bonding *bond, struct sk_buff *skb) | |
| { | |
| struct flow_keys flow; | |
| u32 hash; | |
| if (bond->params.xmit_policy == BOND_XMIT_POLICY_ENCAP34 && | |
| skb->l4_hash) | |
| return skb->hash; | |
| if (bond->params.xmit_policy == BOND_XMIT_POLICY_LAYER2 || | |
| !bond_flow_dissect(bond, skb, &flow)) | |
| return bond_eth_hash(skb); | |
| if (bond->params.xmit_policy == BOND_XMIT_POLICY_LAYER23 || | |
| bond->params.xmit_policy == BOND_XMIT_POLICY_ENCAP23) | |
| hash = bond_eth_hash(skb); | |
| else | |
| hash = (__force u32)flow.ports.ports; | |
| hash ^= (__force u32)flow_get_u32_dst(&flow) ^ | |
| (__force u32)flow_get_u32_src(&flow); | |
| hash ^= (hash >> 16); | |
| hash ^= (hash >> 8); | |
| return hash >> 1; | |
| } | |
| /*-------------------------- Device entry points ----------------------------*/ | |
| void bond_work_init_all(struct bonding *bond) | |
| { | |
| INIT_DELAYED_WORK(&bond->mcast_work, | |
| bond_resend_igmp_join_requests_delayed); | |
| INIT_DELAYED_WORK(&bond->alb_work, bond_alb_monitor); | |
| INIT_DELAYED_WORK(&bond->mii_work, bond_mii_monitor); | |
| INIT_DELAYED_WORK(&bond->arp_work, bond_arp_monitor); | |
| INIT_DELAYED_WORK(&bond->ad_work, bond_3ad_state_machine_handler); | |
| INIT_DELAYED_WORK(&bond->slave_arr_work, bond_slave_arr_handler); | |
| } | |
| static void bond_work_cancel_all(struct bonding *bond) | |
| { | |
| cancel_delayed_work_sync(&bond->mii_work); | |
| cancel_delayed_work_sync(&bond->arp_work); | |
| cancel_delayed_work_sync(&bond->alb_work); | |
| cancel_delayed_work_sync(&bond->ad_work); | |
| cancel_delayed_work_sync(&bond->mcast_work); | |
| cancel_delayed_work_sync(&bond->slave_arr_work); | |
| } | |
| static int bond_open(struct net_device *bond_dev) | |
| { | |
| struct bonding *bond = netdev_priv(bond_dev); | |
| struct list_head *iter; | |
| struct slave *slave; | |
| /* reset slave->backup and slave->inactive */ | |
| if (bond_has_slaves(bond)) { | |
| bond_for_each_slave(bond, slave, iter) { | |
| if (bond_uses_primary(bond) && | |
| slave != rcu_access_pointer(bond->curr_active_slave)) { | |
| bond_set_slave_inactive_flags(slave, | |
| BOND_SLAVE_NOTIFY_NOW); | |
| } else if (BOND_MODE(bond) != BOND_MODE_8023AD) { | |
| bond_set_slave_active_flags(slave, | |
| BOND_SLAVE_NOTIFY_NOW); | |
| } | |
| } | |
| } | |
| if (bond_is_lb(bond)) { | |
| /* bond_alb_initialize must be called before the timer | |
| * is started. | |
| */ | |
| if (bond_alb_initialize(bond, (BOND_MODE(bond) == BOND_MODE_ALB))) | |
| return -ENOMEM; | |
| if (bond->params.tlb_dynamic_lb) | |
| queue_delayed_work(bond->wq, &bond->alb_work, 0); | |
| } | |
| if (bond->params.miimon) /* link check interval, in milliseconds. */ | |
| queue_delayed_work(bond->wq, &bond->mii_work, 0); | |
| if (bond->params.arp_interval) { /* arp interval, in milliseconds. */ | |
| queue_delayed_work(bond->wq, &bond->arp_work, 0); | |
| bond->recv_probe = bond_arp_rcv; | |
| } | |
| if (BOND_MODE(bond) == BOND_MODE_8023AD) { | |
| queue_delayed_work(bond->wq, &bond->ad_work, 0); | |
| /* register to receive LACPDUs */ | |
| bond->recv_probe = bond_3ad_lacpdu_recv; | |
| bond_3ad_initiate_agg_selection(bond, 1); | |
| } | |
| if (bond_mode_uses_xmit_hash(bond)) | |
| bond_update_slave_arr(bond, NULL); | |
| return 0; | |
| } | |
| static int bond_close(struct net_device *bond_dev) | |
| { | |
| struct bonding *bond = netdev_priv(bond_dev); | |
| bond_work_cancel_all(bond); | |
| bond->send_peer_notif = 0; | |
| if (bond_is_lb(bond)) | |
| bond_alb_deinitialize(bond); | |
| bond->recv_probe = NULL; | |
| return 0; | |
| } | |
| /* fold stats, assuming all rtnl_link_stats64 fields are u64, but | |
| * that some drivers can provide 32bit values only. | |
| */ | |
| static void bond_fold_stats(struct rtnl_link_stats64 *_res, | |
| const struct rtnl_link_stats64 *_new, | |
| const struct rtnl_link_stats64 *_old) | |
| { | |
| const u64 *new = (const u64 *)_new; | |
| const u64 *old = (const u64 *)_old; | |
| u64 *res = (u64 *)_res; | |
| int i; | |
| for (i = 0; i < sizeof(*_res) / sizeof(u64); i++) { | |
| u64 nv = new[i]; | |
| u64 ov = old[i]; | |
| s64 delta = nv - ov; | |
| /* detects if this particular field is 32bit only */ | |
| if (((nv | ov) >> 32) == 0) | |
| delta = (s64)(s32)((u32)nv - (u32)ov); | |
| /* filter anomalies, some drivers reset their stats | |
| * at down/up events. | |
| */ | |
| if (delta > 0) | |
| res[i] += delta; | |
| } | |
| } | |
| static void bond_get_stats(struct net_device *bond_dev, | |
| struct rtnl_link_stats64 *stats) | |
| { | |
| struct bonding *bond = netdev_priv(bond_dev); | |
| struct rtnl_link_stats64 temp; | |
| struct list_head *iter; | |
| struct slave *slave; | |
| spin_lock(&bond->stats_lock); | |
| memcpy(stats, &bond->bond_stats, sizeof(*stats)); | |
| rcu_read_lock(); | |
| bond_for_each_slave_rcu(bond, slave, iter) { | |
| const struct rtnl_link_stats64 *new = | |
| dev_get_stats(slave->dev, &temp); | |
| bond_fold_stats(stats, new, &slave->slave_stats); | |
| /* save off the slave stats for the next run */ | |
| memcpy(&slave->slave_stats, new, sizeof(*new)); | |
| } | |
| rcu_read_unlock(); | |
| memcpy(&bond->bond_stats, stats, sizeof(*stats)); | |
| spin_unlock(&bond->stats_lock); | |
| } | |
| static int bond_do_ioctl(struct net_device *bond_dev, struct ifreq *ifr, int cmd) | |
| { | |
| struct bonding *bond = netdev_priv(bond_dev); | |
| struct net_device *slave_dev = NULL; | |
| struct ifbond k_binfo; | |
| struct ifbond __user *u_binfo = NULL; | |
| struct ifslave k_sinfo; | |
| struct ifslave __user *u_sinfo = NULL; | |
| struct mii_ioctl_data *mii = NULL; | |
| struct bond_opt_value newval; | |
| struct net *net; | |
| int res = 0; | |
| netdev_dbg(bond_dev, "bond_ioctl: cmd=%d\n", cmd); | |
| switch (cmd) { | |
| case SIOCGMIIPHY: | |
| mii = if_mii(ifr); | |
| if (!mii) | |
| return -EINVAL; | |
| mii->phy_id = 0; | |
| /* Fall Through */ | |
| case SIOCGMIIREG: | |
| /* We do this again just in case we were called by SIOCGMIIREG | |
| * instead of SIOCGMIIPHY. | |
| */ | |
| mii = if_mii(ifr); | |
| if (!mii) | |
| return -EINVAL; | |
| if (mii->reg_num == 1) { | |
| mii->val_out = 0; | |
| if (netif_carrier_ok(bond->dev)) | |
| mii->val_out = BMSR_LSTATUS; | |
| } | |
| return 0; | |
| case BOND_INFO_QUERY_OLD: | |
| case SIOCBONDINFOQUERY: | |
| u_binfo = (struct ifbond __user *)ifr->ifr_data; | |
| if (copy_from_user(&k_binfo, u_binfo, sizeof(ifbond))) | |
| return -EFAULT; | |
| bond_info_query(bond_dev, &k_binfo); | |
| if (copy_to_user(u_binfo, &k_binfo, sizeof(ifbond))) | |
| return -EFAULT; | |
| return 0; | |
| case BOND_SLAVE_INFO_QUERY_OLD: | |
| case SIOCBONDSLAVEINFOQUERY: | |
| u_sinfo = (struct ifslave __user *)ifr->ifr_data; | |
| if (copy_from_user(&k_sinfo, u_sinfo, sizeof(ifslave))) | |
| return -EFAULT; | |
| res = bond_slave_info_query(bond_dev, &k_sinfo); | |
| if (res == 0 && | |
| copy_to_user(u_sinfo, &k_sinfo, sizeof(ifslave))) | |
| return -EFAULT; | |
| return res; | |
| default: | |
| break; | |
| } | |
| net = dev_net(bond_dev); | |
| if (!ns_capable(net->user_ns, CAP_NET_ADMIN)) | |
| return -EPERM; | |
| slave_dev = __dev_get_by_name(net, ifr->ifr_slave); | |
| netdev_dbg(bond_dev, "slave_dev=%p:\n", slave_dev); | |
| if (!slave_dev) | |
| return -ENODEV; | |
| netdev_dbg(bond_dev, "slave_dev->name=%s:\n", slave_dev->name); | |
| switch (cmd) { | |
| case BOND_ENSLAVE_OLD: | |
| case SIOCBONDENSLAVE: | |
| res = bond_enslave(bond_dev, slave_dev); | |
| break; | |
| case BOND_RELEASE_OLD: | |
| case SIOCBONDRELEASE: | |
| res = bond_release(bond_dev, slave_dev); | |
| break; | |
| case BOND_SETHWADDR_OLD: | |
| case SIOCBONDSETHWADDR: | |
| bond_set_dev_addr(bond_dev, slave_dev); | |
| res = 0; | |
| break; | |
| case BOND_CHANGE_ACTIVE_OLD: | |
| case SIOCBONDCHANGEACTIVE: | |
| bond_opt_initstr(&newval, slave_dev->name); | |
| res = __bond_opt_set_notify(bond, BOND_OPT_ACTIVE_SLAVE, | |
| &newval); | |
| break; | |
| default: | |
| res = -EOPNOTSUPP; | |
| } | |
| return res; | |
| } | |
| static void bond_change_rx_flags(struct net_device *bond_dev, int change) | |
| { | |
| struct bonding *bond = netdev_priv(bond_dev); | |
| if (change & IFF_PROMISC) | |
| bond_set_promiscuity(bond, | |
| bond_dev->flags & IFF_PROMISC ? 1 : -1); | |
| if (change & IFF_ALLMULTI) | |
| bond_set_allmulti(bond, | |
| bond_dev->flags & IFF_ALLMULTI ? 1 : -1); | |
| } | |
| static void bond_set_rx_mode(struct net_device *bond_dev) | |
| { | |
| struct bonding *bond = netdev_priv(bond_dev); | |
| struct list_head *iter; | |
| struct slave *slave; | |
| rcu_read_lock(); | |
| if (bond_uses_primary(bond)) { | |
| slave = rcu_dereference(bond->curr_active_slave); | |
| if (slave) { | |
| dev_uc_sync(slave->dev, bond_dev); | |
| dev_mc_sync(slave->dev, bond_dev); | |
| } | |
| } else { | |
| bond_for_each_slave_rcu(bond, slave, iter) { | |
| dev_uc_sync_multiple(slave->dev, bond_dev); | |
| dev_mc_sync_multiple(slave->dev, bond_dev); | |
| } | |
| } | |
| rcu_read_unlock(); | |
| } | |
| static int bond_neigh_init(struct neighbour *n) | |
| { | |
| struct bonding *bond = netdev_priv(n->dev); | |
| const struct net_device_ops *slave_ops; | |
| struct neigh_parms parms; | |
| struct slave *slave; | |
| int ret; | |
| slave = bond_first_slave(bond); | |
| if (!slave) | |
| return 0; | |
| slave_ops = slave->dev->netdev_ops; | |
| if (!slave_ops->ndo_neigh_setup) | |
| return 0; | |
| parms.neigh_setup = NULL; | |
| parms.neigh_cleanup = NULL; | |
| ret = slave_ops->ndo_neigh_setup(slave->dev, &parms); | |
| if (ret) | |
| return ret; | |
| /* Assign slave's neigh_cleanup to neighbour in case cleanup is called | |
| * after the last slave has been detached. Assumes that all slaves | |
| * utilize the same neigh_cleanup (true at this writing as only user | |
| * is ipoib). | |
| */ | |
| n->parms->neigh_cleanup = parms.neigh_cleanup; | |
| if (!parms.neigh_setup) | |
| return 0; | |
| return parms.neigh_setup(n); | |
| } | |
| /* The bonding ndo_neigh_setup is called at init time beofre any | |
| * slave exists. So we must declare proxy setup function which will | |
| * be used at run time to resolve the actual slave neigh param setup. | |
| * | |
| * It's also called by master devices (such as vlans) to setup their | |
| * underlying devices. In that case - do nothing, we're already set up from | |
| * our init. | |
| */ | |
| static int bond_neigh_setup(struct net_device *dev, | |
| struct neigh_parms *parms) | |
| { | |
| /* modify only our neigh_parms */ | |
| if (parms->dev == dev) | |
| parms->neigh_setup = bond_neigh_init; | |
| return 0; | |
| } | |
| /* Change the MTU of all of a master's slaves to match the master */ | |
| static int bond_change_mtu(struct net_device *bond_dev, int new_mtu) | |
| { | |
| struct bonding *bond = netdev_priv(bond_dev); | |
| struct slave *slave, *rollback_slave; | |
| struct list_head *iter; | |
| int res = 0; | |
| netdev_dbg(bond_dev, "bond=%p, new_mtu=%d\n", bond, new_mtu); | |
| bond_for_each_slave(bond, slave, iter) { | |
| netdev_dbg(bond_dev, "s %p c_m %p\n", | |
| slave, slave->dev->netdev_ops->ndo_change_mtu); | |
| res = dev_set_mtu(slave->dev, new_mtu); | |
| if (res) { | |
| /* If we failed to set the slave's mtu to the new value | |
| * we must abort the operation even in ACTIVE_BACKUP | |
| * mode, because if we allow the backup slaves to have | |
| * different mtu values than the active slave we'll | |
| * need to change their mtu when doing a failover. That | |
| * means changing their mtu from timer context, which | |
| * is probably not a good idea. | |
| */ | |
| netdev_dbg(bond_dev, "err %d %s\n", res, | |
| slave->dev->name); | |
| goto unwind; | |
| } | |
| } | |
| bond_dev->mtu = new_mtu; | |
| return 0; | |
| unwind: | |
| /* unwind from head to the slave that failed */ | |
| bond_for_each_slave(bond, rollback_slave, iter) { | |
| int tmp_res; | |
| if (rollback_slave == slave) | |
| break; | |
| tmp_res = dev_set_mtu(rollback_slave->dev, bond_dev->mtu); | |
| if (tmp_res) { | |
| netdev_dbg(bond_dev, "unwind err %d dev %s\n", | |
| tmp_res, rollback_slave->dev->name); | |
| } | |
| } | |
| return res; | |
| } | |
| /* Change HW address | |
| * | |
| * Note that many devices must be down to change the HW address, and | |
| * downing the master releases all slaves. We can make bonds full of | |
| * bonding devices to test this, however. | |
| */ | |
| static int bond_set_mac_address(struct net_device *bond_dev, void *addr) | |
| { | |
| struct bonding *bond = netdev_priv(bond_dev); | |
| struct slave *slave, *rollback_slave; | |
| struct sockaddr_storage *ss = addr, tmp_ss; | |
| struct list_head *iter; | |
| int res = 0; | |
| if (BOND_MODE(bond) == BOND_MODE_ALB) | |
| return bond_alb_set_mac_address(bond_dev, addr); | |
| netdev_dbg(bond_dev, "bond=%p\n", bond); | |
| /* If fail_over_mac is enabled, do nothing and return success. | |
| * Returning an error causes ifenslave to fail. | |
| */ | |
| if (bond->params.fail_over_mac && | |
| BOND_MODE(bond) == BOND_MODE_ACTIVEBACKUP) | |
| return 0; | |
| if (!is_valid_ether_addr(ss->__data)) | |
| return -EADDRNOTAVAIL; | |
| bond_for_each_slave(bond, slave, iter) { | |
| netdev_dbg(bond_dev, "slave %p %s\n", slave, slave->dev->name); | |
| res = dev_set_mac_address(slave->dev, addr); | |
| if (res) { | |
| /* TODO: consider downing the slave | |
| * and retry ? | |
| * User should expect communications | |
| * breakage anyway until ARP finish | |
| * updating, so... | |
| */ | |
| netdev_dbg(bond_dev, "err %d %s\n", res, slave->dev->name); | |
| goto unwind; | |
| } | |
| } | |
| /* success */ | |
| memcpy(bond_dev->dev_addr, ss->__data, bond_dev->addr_len); | |
| return 0; | |
| unwind: | |
| memcpy(tmp_ss.__data, bond_dev->dev_addr, bond_dev->addr_len); | |
| tmp_ss.ss_family = bond_dev->type; | |
| /* unwind from head to the slave that failed */ | |
| bond_for_each_slave(bond, rollback_slave, iter) { | |
| int tmp_res; | |
| if (rollback_slave == slave) | |
| break; | |
| tmp_res = dev_set_mac_address(rollback_slave->dev, | |
| (struct sockaddr *)&tmp_ss); | |
| if (tmp_res) { | |
| netdev_dbg(bond_dev, "unwind err %d dev %s\n", | |
| tmp_res, rollback_slave->dev->name); | |
| } | |
| } | |
| return res; | |
| } | |
| /** | |
| * bond_xmit_slave_id - transmit skb through slave with slave_id | |
| * @bond: bonding device that is transmitting | |
| * @skb: buffer to transmit | |
| * @slave_id: slave id up to slave_cnt-1 through which to transmit | |
| * | |
| * This function tries to transmit through slave with slave_id but in case | |
| * it fails, it tries to find the first available slave for transmission. | |
| * The skb is consumed in all cases, thus the function is void. | |
| */ | |
| static void bond_xmit_slave_id(struct bonding *bond, struct sk_buff *skb, int slave_id) | |
| { | |
| struct list_head *iter; | |
| struct slave *slave; | |
| int i = slave_id; | |
| /* Here we start from the slave with slave_id */ | |
| bond_for_each_slave_rcu(bond, slave, iter) { | |
| if (--i < 0) { | |
| if (bond_slave_can_tx(slave)) { | |
| bond_dev_queue_xmit(bond, skb, slave->dev); | |
| return; | |
| } | |
| } | |
| } | |
| /* Here we start from the first slave up to slave_id */ | |
| i = slave_id; | |
| bond_for_each_slave_rcu(bond, slave, iter) { | |
| if (--i < 0) | |
| break; | |
| if (bond_slave_can_tx(slave)) { | |
| bond_dev_queue_xmit(bond, skb, slave->dev); | |
| return; | |
| } | |
| } | |
| /* no slave that can tx has been found */ | |
| bond_tx_drop(bond->dev, skb); | |
| } | |
| /** | |
| * bond_rr_gen_slave_id - generate slave id based on packets_per_slave | |
| * @bond: bonding device to use | |
| * | |
| * Based on the value of the bonding device's packets_per_slave parameter | |
| * this function generates a slave id, which is usually used as the next | |
| * slave to transmit through. | |
| */ | |
| static u32 bond_rr_gen_slave_id(struct bonding *bond) | |
| { | |
| u32 slave_id; | |
| struct reciprocal_value reciprocal_packets_per_slave; | |
| int packets_per_slave = bond->params.packets_per_slave; | |
| switch (packets_per_slave) { | |
| case 0: | |
| slave_id = prandom_u32(); | |
| break; | |
| case 1: | |
| slave_id = bond->rr_tx_counter; | |
| break; | |
| default: | |
| reciprocal_packets_per_slave = | |
| bond->params.reciprocal_packets_per_slave; | |
| slave_id = reciprocal_divide(bond->rr_tx_counter, | |
| reciprocal_packets_per_slave); | |
| break; | |
| } | |
| bond->rr_tx_counter++; | |
| return slave_id; | |
| } | |
| static int bond_xmit_roundrobin(struct sk_buff *skb, struct net_device *bond_dev) | |
| { | |
| struct bonding *bond = netdev_priv(bond_dev); | |
| struct iphdr *iph = ip_hdr(skb); | |
| struct slave *slave; | |
| u32 slave_id; | |
| /* Start with the curr_active_slave that joined the bond as the | |
| * default for sending IGMP traffic. For failover purposes one | |
| * needs to maintain some consistency for the interface that will | |
| * send the join/membership reports. The curr_active_slave found | |
| * will send all of this type of traffic. | |
| */ | |
| if (iph->protocol == IPPROTO_IGMP && skb->protocol == htons(ETH_P_IP)) { | |
| slave = rcu_dereference(bond->curr_active_slave); | |
| if (slave) | |
| bond_dev_queue_xmit(bond, skb, slave->dev); | |
| else | |
| bond_xmit_slave_id(bond, skb, 0); | |
| } else { | |
| int slave_cnt = ACCESS_ONCE(bond->slave_cnt); | |
| if (likely(slave_cnt)) { | |
| slave_id = bond_rr_gen_slave_id(bond); | |
| bond_xmit_slave_id(bond, skb, slave_id % slave_cnt); | |
| } else { | |
| bond_tx_drop(bond_dev, skb); | |
| } | |
| } | |
| return NETDEV_TX_OK; | |
| } | |
| /* In active-backup mode, we know that bond->curr_active_slave is always valid if | |
| * the bond has a usable interface. | |
| */ | |
| static int bond_xmit_activebackup(struct sk_buff *skb, struct net_device *bond_dev) | |
| { | |
| struct bonding *bond = netdev_priv(bond_dev); | |
| struct slave *slave; | |
| slave = rcu_dereference(bond->curr_active_slave); | |
| if (slave) | |
| bond_dev_queue_xmit(bond, skb, slave->dev); | |
| else | |
| bond_tx_drop(bond_dev, skb); | |
| return NETDEV_TX_OK; | |
| } | |
| /* Use this to update slave_array when (a) it's not appropriate to update | |
| * slave_array right away (note that update_slave_array() may sleep) | |
| * and / or (b) RTNL is not held. | |
| */ | |
| void bond_slave_arr_work_rearm(struct bonding *bond, unsigned long delay) | |
| { | |
| queue_delayed_work(bond->wq, &bond->slave_arr_work, delay); | |
| } | |
| /* Slave array work handler. Holds only RTNL */ | |
| static void bond_slave_arr_handler(struct work_struct *work) | |
| { | |
| struct bonding *bond = container_of(work, struct bonding, | |
| slave_arr_work.work); | |
| int ret; | |
| if (!rtnl_trylock()) | |
| goto err; | |
| ret = bond_update_slave_arr(bond, NULL); | |
| rtnl_unlock(); | |
| if (ret) { | |
| pr_warn_ratelimited("Failed to update slave array from WT\n"); | |
| goto err; | |
| } | |
| return; | |
| err: | |
| bond_slave_arr_work_rearm(bond, 1); | |
| } | |
| /* Build the usable slaves array in control path for modes that use xmit-hash | |
| * to determine the slave interface - | |
| * (a) BOND_MODE_8023AD | |
| * (b) BOND_MODE_XOR | |
| * (c) BOND_MODE_TLB && tlb_dynamic_lb == 0 | |
| * | |
| * The caller is expected to hold RTNL only and NO other lock! | |
| */ | |
| int bond_update_slave_arr(struct bonding *bond, struct slave *skipslave) | |
| { | |
| struct slave *slave; | |
| struct list_head *iter; | |
| struct bond_up_slave *new_arr, *old_arr; | |
| int agg_id = 0; | |
| int ret = 0; | |
| #ifdef CONFIG_LOCKDEP | |
| WARN_ON(lockdep_is_held(&bond->mode_lock)); | |
| #endif | |
| new_arr = kzalloc(offsetof(struct bond_up_slave, arr[bond->slave_cnt]), | |
| GFP_KERNEL); | |
| if (!new_arr) { | |
| ret = -ENOMEM; | |
| pr_err("Failed to build slave-array.\n"); | |
| goto out; | |
| } | |
| if (BOND_MODE(bond) == BOND_MODE_8023AD) { | |
| struct ad_info ad_info; | |
| if (bond_3ad_get_active_agg_info(bond, &ad_info)) { | |
| pr_debug("bond_3ad_get_active_agg_info failed\n"); | |
| kfree_rcu(new_arr, rcu); | |
| /* No active aggragator means it's not safe to use | |
| * the previous array. | |
| */ | |
| old_arr = rtnl_dereference(bond->slave_arr); | |
| if (old_arr) { | |
| RCU_INIT_POINTER(bond->slave_arr, NULL); | |
| kfree_rcu(old_arr, rcu); | |
| } | |
| goto out; | |
| } | |
| agg_id = ad_info.aggregator_id; | |
| } | |
| bond_for_each_slave(bond, slave, iter) { | |
| if (BOND_MODE(bond) == BOND_MODE_8023AD) { | |
| struct aggregator *agg; | |
| agg = SLAVE_AD_INFO(slave)->port.aggregator; | |
| if (!agg || agg->aggregator_identifier != agg_id) | |
| continue; | |
| } | |
| if (!bond_slave_can_tx(slave)) | |
| continue; | |
| if (skipslave == slave) | |
| continue; | |
| new_arr->arr[new_arr->count++] = slave; | |
| } | |
| old_arr = rtnl_dereference(bond->slave_arr); | |
| rcu_assign_pointer(bond->slave_arr, new_arr); | |
| if (old_arr) | |
| kfree_rcu(old_arr, rcu); | |
| out: | |
| if (ret != 0 && skipslave) { | |
| int idx; | |
| /* Rare situation where caller has asked to skip a specific | |
| * slave but allocation failed (most likely!). BTW this is | |
| * only possible when the call is initiated from | |
| * __bond_release_one(). In this situation; overwrite the | |
| * skipslave entry in the array with the last entry from the | |
| * array to avoid a situation where the xmit path may choose | |
| * this to-be-skipped slave to send a packet out. | |
| */ | |
| old_arr = rtnl_dereference(bond->slave_arr); | |
| for (idx = 0; idx < old_arr->count; idx++) { | |
| if (skipslave == old_arr->arr[idx]) { | |
| old_arr->arr[idx] = | |
| old_arr->arr[old_arr->count-1]; | |
| old_arr->count--; | |
| break; | |
| } | |
| } | |
| } | |
| return ret; | |
| } | |
| /* Use this Xmit function for 3AD as well as XOR modes. The current | |
| * usable slave array is formed in the control path. The xmit function | |
| * just calculates hash and sends the packet out. | |
| */ | |
| static int bond_3ad_xor_xmit(struct sk_buff *skb, struct net_device *dev) | |
| { | |
| struct bonding *bond = netdev_priv(dev); | |
| struct slave *slave; | |
| struct bond_up_slave *slaves; | |
| unsigned int count; | |
| slaves = rcu_dereference(bond->slave_arr); | |
| count = slaves ? ACCESS_ONCE(slaves->count) : 0; | |
| if (likely(count)) { | |
| slave = slaves->arr[bond_xmit_hash(bond, skb) % count]; | |
| bond_dev_queue_xmit(bond, skb, slave->dev); | |
| } else { | |
| bond_tx_drop(dev, skb); | |
| } | |
| return NETDEV_TX_OK; | |
| } | |
| /* in broadcast mode, we send everything to all usable interfaces. */ | |
| static int bond_xmit_broadcast(struct sk_buff *skb, struct net_device *bond_dev) | |
| { | |
| struct bonding *bond = netdev_priv(bond_dev); | |
| struct slave *slave = NULL; | |
| struct list_head *iter; | |
| bond_for_each_slave_rcu(bond, slave, iter) { | |
| if (bond_is_last_slave(bond, slave)) | |
| break; | |
| if (bond_slave_is_up(slave) && slave->link == BOND_LINK_UP) { | |
| struct sk_buff *skb2 = skb_clone(skb, GFP_ATOMIC); | |
| if (!skb2) { | |
| net_err_ratelimited("%s: Error: %s: skb_clone() failed\n", | |
| bond_dev->name, __func__); | |
| continue; | |
| } | |
| bond_dev_queue_xmit(bond, skb2, slave->dev); | |
| } | |
| } | |
| if (slave && bond_slave_is_up(slave) && slave->link == BOND_LINK_UP) | |
| bond_dev_queue_xmit(bond, skb, slave->dev); | |
| else | |
| bond_tx_drop(bond_dev, skb); | |
| return NETDEV_TX_OK; | |
| } | |
| /*------------------------- Device initialization ---------------------------*/ | |
| /* Lookup the slave that corresponds to a qid */ | |
| static inline int bond_slave_override(struct bonding *bond, | |
| struct sk_buff *skb) | |
| { | |
| struct slave *slave = NULL; | |
| struct list_head *iter; | |
| if (!skb->queue_mapping) | |
| return 1; | |
| /* Find out if any slaves have the same mapping as this skb. */ | |
| bond_for_each_slave_rcu(bond, slave, iter) { | |
| if (slave->queue_id == skb->queue_mapping) { | |
| if (bond_slave_is_up(slave) && | |
| slave->link == BOND_LINK_UP) { | |
| bond_dev_queue_xmit(bond, skb, slave->dev); | |
| return 0; | |
| } | |
| /* If the slave isn't UP, use default transmit policy. */ | |
| break; | |
| } | |
| } | |
| return 1; | |
| } | |
| static u16 bond_select_queue(struct net_device *dev, struct sk_buff *skb, | |
| void *accel_priv, select_queue_fallback_t fallback) | |
| { | |
| /* This helper function exists to help dev_pick_tx get the correct | |
| * destination queue. Using a helper function skips a call to | |
| * skb_tx_hash and will put the skbs in the queue we expect on their | |
| * way down to the bonding driver. | |
| */ | |
| u16 txq = skb_rx_queue_recorded(skb) ? skb_get_rx_queue(skb) : 0; | |
| /* Save the original txq to restore before passing to the driver */ | |
| qdisc_skb_cb(skb)->slave_dev_queue_mapping = skb->queue_mapping; | |
| if (unlikely(txq >= dev->real_num_tx_queues)) { | |
| do { | |
| txq -= dev->real_num_tx_queues; | |
| } while (txq >= dev->real_num_tx_queues); | |
| } | |
| return txq; | |
| } | |
| static netdev_tx_t __bond_start_xmit(struct sk_buff *skb, struct net_device *dev) | |
| { | |
| struct bonding *bond = netdev_priv(dev); | |
| if (bond_should_override_tx_queue(bond) && | |
| !bond_slave_override(bond, skb)) | |
| return NETDEV_TX_OK; | |
| switch (BOND_MODE(bond)) { | |
| case BOND_MODE_ROUNDROBIN: | |
| return bond_xmit_roundrobin(skb, dev); | |
| case BOND_MODE_ACTIVEBACKUP: | |
| return bond_xmit_activebackup(skb, dev); | |
| case BOND_MODE_8023AD: | |
| case BOND_MODE_XOR: | |
| return bond_3ad_xor_xmit(skb, dev); | |
| case BOND_MODE_BROADCAST: | |
| return bond_xmit_broadcast(skb, dev); | |
| case BOND_MODE_ALB: | |
| return bond_alb_xmit(skb, dev); | |
| case BOND_MODE_TLB: | |
| return bond_tlb_xmit(skb, dev); | |
| default: | |
| /* Should never happen, mode already checked */ | |
| netdev_err(dev, "Unknown bonding mode %d\n", BOND_MODE(bond)); | |
| WARN_ON_ONCE(1); | |
| bond_tx_drop(dev, skb); | |
| return NETDEV_TX_OK; | |
| } | |
| } | |
| static netdev_tx_t bond_start_xmit(struct sk_buff *skb, struct net_device *dev) | |
| { | |
| struct bonding *bond = netdev_priv(dev); | |
| netdev_tx_t ret = NETDEV_TX_OK; | |
| /* If we risk deadlock from transmitting this in the | |
| * netpoll path, tell netpoll to queue the frame for later tx | |
| */ | |
| if (unlikely(is_netpoll_tx_blocked(dev))) | |
| return NETDEV_TX_BUSY; | |
| rcu_read_lock(); | |
| if (bond_has_slaves(bond)) | |
| ret = __bond_start_xmit(skb, dev); | |
| else | |
| bond_tx_drop(dev, skb); | |
| rcu_read_unlock(); | |
| return ret; | |
| } | |
| static int bond_ethtool_get_link_ksettings(struct net_device *bond_dev, | |
| struct ethtool_link_ksettings *cmd) | |
| { | |
| struct bonding *bond = netdev_priv(bond_dev); | |
| unsigned long speed = 0; | |
| struct list_head *iter; | |
| struct slave *slave; | |
| cmd->base.duplex = DUPLEX_UNKNOWN; | |
| cmd->base.port = PORT_OTHER; | |
| /* Since bond_slave_can_tx returns false for all inactive or down slaves, we | |
| * do not need to check mode. Though link speed might not represent | |
| * the true receive or transmit bandwidth (not all modes are symmetric) | |
| * this is an accurate maximum. | |
| */ | |
| bond_for_each_slave(bond, slave, iter) { | |
| if (bond_slave_can_tx(slave)) { | |
| if (slave->speed != SPEED_UNKNOWN) | |
| speed += slave->speed; | |
| if (cmd->base.duplex == DUPLEX_UNKNOWN && | |
| slave->duplex != DUPLEX_UNKNOWN) | |
| cmd->base.duplex = slave->duplex; | |
| } | |
| } | |
| cmd->base.speed = speed ? : SPEED_UNKNOWN; | |
| return 0; | |
| } | |
| static void bond_ethtool_get_drvinfo(struct net_device *bond_dev, | |
| struct ethtool_drvinfo *drvinfo) | |
| { | |
| strlcpy(drvinfo->driver, DRV_NAME, sizeof(drvinfo->driver)); | |
| strlcpy(drvinfo->version, DRV_VERSION, sizeof(drvinfo->version)); | |
| snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version), "%d", | |
| BOND_ABI_VERSION); | |
| } | |
| static const struct ethtool_ops bond_ethtool_ops = { | |
| .get_drvinfo = bond_ethtool_get_drvinfo, | |
| .get_link = ethtool_op_get_link, | |
| .get_link_ksettings = bond_ethtool_get_link_ksettings, | |
| }; | |
| static const struct net_device_ops bond_netdev_ops = { | |
| .ndo_init = bond_init, | |
| .ndo_uninit = bond_uninit, | |
| .ndo_open = bond_open, | |
| .ndo_stop = bond_close, | |
| .ndo_start_xmit = bond_start_xmit, | |
| .ndo_select_queue = bond_select_queue, | |
| .ndo_get_stats64 = bond_get_stats, | |
| .ndo_do_ioctl = bond_do_ioctl, | |
| .ndo_change_rx_flags = bond_change_rx_flags, | |
| .ndo_set_rx_mode = bond_set_rx_mode, | |
| .ndo_change_mtu = bond_change_mtu, | |
| .ndo_set_mac_address = bond_set_mac_address, | |
| .ndo_neigh_setup = bond_neigh_setup, | |
| .ndo_vlan_rx_add_vid = bond_vlan_rx_add_vid, | |
| .ndo_vlan_rx_kill_vid = bond_vlan_rx_kill_vid, | |
| #ifdef CONFIG_NET_POLL_CONTROLLER | |
| .ndo_netpoll_setup = bond_netpoll_setup, | |
| .ndo_netpoll_cleanup = bond_netpoll_cleanup, | |
| .ndo_poll_controller = bond_poll_controller, | |
| #endif | |
| .ndo_add_slave = bond_enslave, | |
| .ndo_del_slave = bond_release, | |
| .ndo_fix_features = bond_fix_features, | |
| .ndo_features_check = passthru_features_check, | |
| }; | |
| static const struct device_type bond_type = { | |
| .name = "bond", | |
| }; | |
| static void bond_destructor(struct net_device *bond_dev) | |
| { | |
| struct bonding *bond = netdev_priv(bond_dev); | |
| if (bond->wq) | |
| destroy_workqueue(bond->wq); | |
| } | |
| void bond_setup(struct net_device *bond_dev) | |
| { | |
| struct bonding *bond = netdev_priv(bond_dev); | |
| spin_lock_init(&bond->mode_lock); | |
| spin_lock_init(&bond->stats_lock); | |
| bond->params = bonding_defaults; | |
| /* Initialize pointers */ | |
| bond->dev = bond_dev; | |
| /* Initialize the device entry points */ | |
| ether_setup(bond_dev); | |
| bond_dev->max_mtu = ETH_MAX_MTU; | |
| bond_dev->netdev_ops = &bond_netdev_ops; | |
| bond_dev->ethtool_ops = &bond_ethtool_ops; | |
| bond_dev->needs_free_netdev = true; | |
| bond_dev->priv_destructor = bond_destructor; | |
| SET_NETDEV_DEVTYPE(bond_dev, &bond_type); | |
| /* Initialize the device options */ | |
| bond_dev->flags |= IFF_MASTER; | |
| bond_dev->priv_flags |= IFF_BONDING | IFF_UNICAST_FLT | IFF_NO_QUEUE; | |
| bond_dev->priv_flags &= ~(IFF_XMIT_DST_RELEASE | IFF_TX_SKB_SHARING); | |
| /* don't acquire bond device's netif_tx_lock when transmitting */ | |
| bond_dev->features |= NETIF_F_LLTX; | |
| /* By default, we declare the bond to be fully | |
| * VLAN hardware accelerated capable. Special | |
| * care is taken in the various xmit functions | |
| * when there are slaves that are not hw accel | |
| * capable | |
| */ | |
| /* Don't allow bond devices to change network namespaces. */ | |
| bond_dev->features |= NETIF_F_NETNS_LOCAL; | |
| bond_dev->hw_features = BOND_VLAN_FEATURES | | |
| NETIF_F_HW_VLAN_CTAG_TX | | |
| NETIF_F_HW_VLAN_CTAG_RX | | |
| NETIF_F_HW_VLAN_CTAG_FILTER; | |
| bond_dev->hw_features |= NETIF_F_GSO_ENCAP_ALL; | |
| bond_dev->features |= bond_dev->hw_features; | |
| } | |
| /* Destroy a bonding device. | |
| * Must be under rtnl_lock when this function is called. | |
| */ | |
| static void bond_uninit(struct net_device *bond_dev) | |
| { | |
| struct bonding *bond = netdev_priv(bond_dev); | |
| struct list_head *iter; | |
| struct slave *slave; | |
| struct bond_up_slave *arr; | |
| bond_netpoll_cleanup(bond_dev); | |
| /* Release the bonded slaves */ | |
| bond_for_each_slave(bond, slave, iter) | |
| __bond_release_one(bond_dev, slave->dev, true, true); | |
| netdev_info(bond_dev, "Released all slaves\n"); | |
| arr = rtnl_dereference(bond->slave_arr); | |
| if (arr) { | |
| RCU_INIT_POINTER(bond->slave_arr, NULL); | |
| kfree_rcu(arr, rcu); | |
| } | |
| list_del(&bond->bond_list); | |
| bond_debug_unregister(bond); | |
| } | |
| /*------------------------- Module initialization ---------------------------*/ | |
| static int bond_check_params(struct bond_params *params) | |
| { | |
| int arp_validate_value, fail_over_mac_value, primary_reselect_value, i; | |
| struct bond_opt_value newval; | |
| const struct bond_opt_value *valptr; | |
| int arp_all_targets_value = 0; | |
| u16 ad_actor_sys_prio = 0; | |
| u16 ad_user_port_key = 0; | |
| __be32 arp_target[BOND_MAX_ARP_TARGETS] = { 0 }; | |
| int arp_ip_count; | |
| int bond_mode = BOND_MODE_ROUNDROBIN; | |
| int xmit_hashtype = BOND_XMIT_POLICY_LAYER2; | |
| int lacp_fast = 0; | |
| int tlb_dynamic_lb; | |
| /* Convert string parameters. */ | |
| if (mode) { | |
| bond_opt_initstr(&newval, mode); | |
| valptr = bond_opt_parse(bond_opt_get(BOND_OPT_MODE), &newval); | |
| if (!valptr) { | |
| pr_err("Error: Invalid bonding mode \"%s\"\n", mode); | |
| return -EINVAL; | |
| } | |
| bond_mode = valptr->value; | |
| } | |
| if (xmit_hash_policy) { | |
| if ((bond_mode != BOND_MODE_XOR) && | |
| (bond_mode != BOND_MODE_8023AD) && | |
| (bond_mode != BOND_MODE_TLB)) { | |
| pr_info("xmit_hash_policy param is irrelevant in mode %s\n", | |
| bond_mode_name(bond_mode)); | |
| } else { | |
| bond_opt_initstr(&newval, xmit_hash_policy); | |
| valptr = bond_opt_parse(bond_opt_get(BOND_OPT_XMIT_HASH), | |
| &newval); | |
| if (!valptr) { | |
| pr_err("Error: Invalid xmit_hash_policy \"%s\"\n", | |
| xmit_hash_policy); | |
| return -EINVAL; | |
| } | |
| xmit_hashtype = valptr->value; | |
| } | |
| } | |
| if (lacp_rate) { | |
| if (bond_mode != BOND_MODE_8023AD) { | |
| pr_info("lacp_rate param is irrelevant in mode %s\n", | |
| bond_mode_name(bond_mode)); | |
| } else { | |
| bond_opt_initstr(&newval, lacp_rate); | |
| valptr = bond_opt_parse(bond_opt_get(BOND_OPT_LACP_RATE), | |
| &newval); | |
| if (!valptr) { | |
| pr_err("Error: Invalid lacp rate \"%s\"\n", | |
| lacp_rate); | |
| return -EINVAL; | |
| } | |
| lacp_fast = valptr->value; | |
| } | |
| } | |
| if (ad_select) { | |
| bond_opt_initstr(&newval, ad_select); | |
| valptr = bond_opt_parse(bond_opt_get(BOND_OPT_AD_SELECT), | |
| &newval); | |
| if (!valptr) { | |
| pr_err("Error: Invalid ad_select \"%s\"\n", ad_select); | |
| return -EINVAL; | |
| } | |
| params->ad_select = valptr->value; | |
| if (bond_mode != BOND_MODE_8023AD) | |
| pr_warn("ad_select param only affects 802.3ad mode\n"); | |
| } else { | |
| params->ad_select = BOND_AD_STABLE; | |
| } | |
| if (max_bonds < 0) { | |
| pr_warn("Warning: max_bonds (%d) not in range %d-%d, so it was reset to BOND_DEFAULT_MAX_BONDS (%d)\n", | |
| max_bonds, 0, INT_MAX, BOND_DEFAULT_MAX_BONDS); | |
| max_bonds = BOND_DEFAULT_MAX_BONDS; | |
| } | |
| if (miimon < 0) { | |
| pr_warn("Warning: miimon module parameter (%d), not in range 0-%d, so it was reset to 0\n", | |
| miimon, INT_MAX); | |
| miimon = 0; | |
| } | |
| if (updelay < 0) { | |
| pr_warn("Warning: updelay module parameter (%d), not in range 0-%d, so it was reset to 0\n", | |
| updelay, INT_MAX); | |
| updelay = 0; | |
| } | |
| if (downdelay < 0) { | |
| pr_warn("Warning: downdelay module parameter (%d), not in range 0-%d, so it was reset to 0\n", | |
| downdelay, INT_MAX); | |
| downdelay = 0; | |
| } | |
| if ((use_carrier != 0) && (use_carrier != 1)) { | |
| pr_warn("Warning: use_carrier module parameter (%d), not of valid value (0/1), so it was set to 1\n", | |
| use_carrier); | |
| use_carrier = 1; | |
| } | |
| if (num_peer_notif < 0 || num_peer_notif > 255) { | |
| pr_warn("Warning: num_grat_arp/num_unsol_na (%d) not in range 0-255 so it was reset to 1\n", | |
| num_peer_notif); | |
| num_peer_notif = 1; | |
| } | |
| /* reset values for 802.3ad/TLB/ALB */ | |
| if (!bond_mode_uses_arp(bond_mode)) { | |
| if (!miimon) { | |
| pr_warn("Warning: miimon must be specified, otherwise bonding will not detect link failure, speed and duplex which are essential for 802.3ad operation\n"); | |
| pr_warn("Forcing miimon to 100msec\n"); | |
| miimon = BOND_DEFAULT_MIIMON; | |
| } | |
| } | |
| if (tx_queues < 1 || tx_queues > 255) { | |
| pr_warn("Warning: tx_queues (%d) should be between 1 and 255, resetting to %d\n", | |
| tx_queues, BOND_DEFAULT_TX_QUEUES); | |
| tx_queues = BOND_DEFAULT_TX_QUEUES; | |
| } | |
| if ((all_slaves_active != 0) && (all_slaves_active != 1)) { | |
| pr_warn("Warning: all_slaves_active module parameter (%d), not of valid value (0/1), so it was set to 0\n", | |
| all_slaves_active); | |
| all_slaves_active = 0; | |
| } | |
| if (resend_igmp < 0 || resend_igmp > 255) { | |
| pr_warn("Warning: resend_igmp (%d) should be between 0 and 255, resetting to %d\n", | |
| resend_igmp, BOND_DEFAULT_RESEND_IGMP); | |
| resend_igmp = BOND_DEFAULT_RESEND_IGMP; | |
| } | |
| bond_opt_initval(&newval, packets_per_slave); | |
| if (!bond_opt_parse(bond_opt_get(BOND_OPT_PACKETS_PER_SLAVE), &newval)) { | |
| pr_warn("Warning: packets_per_slave (%d) should be between 0 and %u resetting to 1\n", | |
| packets_per_slave, USHRT_MAX); | |
| packets_per_slave = 1; | |
| } | |
| if (bond_mode == BOND_MODE_ALB) { | |
| pr_notice("In ALB mode you might experience client disconnections upon reconnection of a link if the bonding module updelay parameter (%d msec) is incompatible with the forwarding delay time of the switch\n", | |
| updelay); | |
| } | |
| if (!miimon) { | |
| if (updelay || downdelay) { | |
| /* just warn the user the up/down delay will have | |
| * no effect since miimon is zero... | |
| */ | |
| pr_warn("Warning: miimon module parameter not set and updelay (%d) or downdelay (%d) module parameter is set; updelay and downdelay have no effect unless miimon is set\n", | |
| updelay, downdelay); | |
| } | |
| } else { | |
| /* don't allow arp monitoring */ | |
| if (arp_interval) { | |
| pr_warn("Warning: miimon (%d) and arp_interval (%d) can't be used simultaneously, disabling ARP monitoring\n", | |
| miimon, arp_interval); | |
| arp_interval = 0; | |
| } | |
| if ((updelay % miimon) != 0) { | |
| pr_warn("Warning: updelay (%d) is not a multiple of miimon (%d), updelay rounded to %d ms\n", | |
| updelay, miimon, (updelay / miimon) * miimon); | |
| } | |
| updelay /= miimon; | |
| if ((downdelay % miimon) != 0) { | |
| pr_warn("Warning: downdelay (%d) is not a multiple of miimon (%d), downdelay rounded to %d ms\n", | |
| downdelay, miimon, | |
| (downdelay / miimon) * miimon); | |
| } | |
| downdelay /= miimon; | |
| } | |
| if (arp_interval < 0) { | |
| pr_warn("Warning: arp_interval module parameter (%d), not in range 0-%d, so it was reset to 0\n", | |
| arp_interval, INT_MAX); | |
| arp_interval = 0; | |
| } | |
| for (arp_ip_count = 0, i = 0; | |
| (arp_ip_count < BOND_MAX_ARP_TARGETS) && arp_ip_target[i]; i++) { | |
| __be32 ip; | |
| /* not a complete check, but good enough to catch mistakes */ | |
| if (!in4_pton(arp_ip_target[i], -1, (u8 *)&ip, -1, NULL) || | |
| !bond_is_ip_target_ok(ip)) { | |
| pr_warn("Warning: bad arp_ip_target module parameter (%s), ARP monitoring will not be performed\n", | |
| arp_ip_target[i]); | |
| arp_interval = 0; | |
| } else { | |
| if (bond_get_targets_ip(arp_target, ip) == -1) | |
| arp_target[arp_ip_count++] = ip; | |
| else | |
| pr_warn("Warning: duplicate address %pI4 in arp_ip_target, skipping\n", | |
| &ip); | |
| } | |
| } | |
| if (arp_interval && !arp_ip_count) { | |
| /* don't allow arping if no arp_ip_target given... */ | |
| pr_warn("Warning: arp_interval module parameter (%d) specified without providing an arp_ip_target parameter, arp_interval was reset to 0\n", | |
| arp_interval); | |
| arp_interval = 0; | |
| } | |
| if (arp_validate) { | |
| if (!arp_interval) { | |
| pr_err("arp_validate requires arp_interval\n"); | |
| return -EINVAL; | |
| } | |
| bond_opt_initstr(&newval, arp_validate); | |
| valptr = bond_opt_parse(bond_opt_get(BOND_OPT_ARP_VALIDATE), | |
| &newval); | |
| if (!valptr) { | |
| pr_err("Error: invalid arp_validate \"%s\"\n", | |
| arp_validate); | |
| return -EINVAL; | |
| } | |
| arp_validate_value = valptr->value; | |
| } else { | |
| arp_validate_value = 0; | |
| } | |
| if (arp_all_targets) { | |
| bond_opt_initstr(&newval, arp_all_targets); | |
| valptr = bond_opt_parse(bond_opt_get(BOND_OPT_ARP_ALL_TARGETS), | |
| &newval); | |
| if (!valptr) { | |
| pr_err("Error: invalid arp_all_targets_value \"%s\"\n", | |
| arp_all_targets); | |
| arp_all_targets_value = 0; | |
| } else { | |
| arp_all_targets_value = valptr->value; | |
| } | |
| } | |
| if (miimon) { | |
| pr_info("MII link monitoring set to %d ms\n", miimon); | |
| } else if (arp_interval) { | |
| valptr = bond_opt_get_val(BOND_OPT_ARP_VALIDATE, | |
| arp_validate_value); | |
| pr_info("ARP monitoring set to %d ms, validate %s, with %d target(s):", | |
| arp_interval, valptr->string, arp_ip_count); | |
| for (i = 0; i < arp_ip_count; i++) | |
| pr_cont(" %s", arp_ip_target[i]); | |
| pr_cont("\n"); | |
| } else if (max_bonds) { | |
| /* miimon and arp_interval not set, we need one so things | |
| * work as expected, see bonding.txt for details | |
| */ | |
| pr_debug("Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details\n"); | |
| } | |
| if (primary && !bond_mode_uses_primary(bond_mode)) { | |
| /* currently, using a primary only makes sense | |
| * in active backup, TLB or ALB modes | |
| */ | |
| pr_warn("Warning: %s primary device specified but has no effect in %s mode\n", | |
| primary, bond_mode_name(bond_mode)); | |
| primary = NULL; | |
| } | |
| if (primary && primary_reselect) { | |
| bond_opt_initstr(&newval, primary_reselect); | |
| valptr = bond_opt_parse(bond_opt_get(BOND_OPT_PRIMARY_RESELECT), | |
| &newval); | |
| if (!valptr) { | |
| pr_err("Error: Invalid primary_reselect \"%s\"\n", | |
| primary_reselect); | |
| return -EINVAL; | |
| } | |
| primary_reselect_value = valptr->value; | |
| } else { | |
| primary_reselect_value = BOND_PRI_RESELECT_ALWAYS; | |
| } | |
| if (fail_over_mac) { | |
| bond_opt_initstr(&newval, fail_over_mac); | |
| valptr = bond_opt_parse(bond_opt_get(BOND_OPT_FAIL_OVER_MAC), | |
| &newval); | |
| if (!valptr) { | |
| pr_err("Error: invalid fail_over_mac \"%s\"\n", | |
| fail_over_mac); | |
| return -EINVAL; | |
| } | |
| fail_over_mac_value = valptr->value; | |
| if (bond_mode != BOND_MODE_ACTIVEBACKUP) | |
| pr_warn("Warning: fail_over_mac only affects active-backup mode\n"); | |
| } else { | |
| fail_over_mac_value = BOND_FOM_NONE; | |
| } | |
| bond_opt_initstr(&newval, "default"); | |
| valptr = bond_opt_parse( | |
| bond_opt_get(BOND_OPT_AD_ACTOR_SYS_PRIO), | |
| &newval); | |
| if (!valptr) { | |
| pr_err("Error: No ad_actor_sys_prio default value"); | |
| return -EINVAL; | |
| } | |
| ad_actor_sys_prio = valptr->value; | |
| valptr = bond_opt_parse(bond_opt_get(BOND_OPT_AD_USER_PORT_KEY), | |
| &newval); | |
| if (!valptr) { | |
| pr_err("Error: No ad_user_port_key default value"); | |
| return -EINVAL; | |
| } | |
| ad_user_port_key = valptr->value; | |
| bond_opt_initstr(&newval, "default"); | |
| valptr = bond_opt_parse(bond_opt_get(BOND_OPT_TLB_DYNAMIC_LB), &newval); | |
| if (!valptr) { | |
| pr_err("Error: No tlb_dynamic_lb default value"); | |
| return -EINVAL; | |
| } | |
| tlb_dynamic_lb = valptr->value; | |
| if (lp_interval == 0) { | |
| pr_warn("Warning: ip_interval must be between 1 and %d, so it was reset to %d\n", | |
| INT_MAX, BOND_ALB_DEFAULT_LP_INTERVAL); | |
| lp_interval = BOND_ALB_DEFAULT_LP_INTERVAL; | |
| } | |
| /* fill params struct with the proper values */ | |
| params->mode = bond_mode; | |
| params->xmit_policy = xmit_hashtype; | |
| params->miimon = miimon; | |
| params->num_peer_notif = num_peer_notif; | |
| params->arp_interval = arp_interval; | |
| params->arp_validate = arp_validate_value; | |
| params->arp_all_targets = arp_all_targets_value; | |
| params->updelay = updelay; | |
| params->downdelay = downdelay; | |
| params->use_carrier = use_carrier; | |
| params->lacp_fast = lacp_fast; | |
| params->primary[0] = 0; | |
| params->primary_reselect = primary_reselect_value; | |
| params->fail_over_mac = fail_over_mac_value; | |
| params->tx_queues = tx_queues; | |
| params->all_slaves_active = all_slaves_active; | |
| params->resend_igmp = resend_igmp; | |
| params->min_links = min_links; | |
| params->lp_interval = lp_interval; | |
| params->packets_per_slave = packets_per_slave; | |
| params->tlb_dynamic_lb = tlb_dynamic_lb; | |
| params->ad_actor_sys_prio = ad_actor_sys_prio; | |
| eth_zero_addr(params->ad_actor_system); | |
| params->ad_user_port_key = ad_user_port_key; | |
| if (packets_per_slave > 0) { | |
| params->reciprocal_packets_per_slave = | |
| reciprocal_value(packets_per_slave); | |
| } else { | |
| /* reciprocal_packets_per_slave is unused if | |
| * packets_per_slave is 0 or 1, just initialize it | |
| */ | |
| params->reciprocal_packets_per_slave = | |
| (struct reciprocal_value) { 0 }; | |
| } | |
| if (primary) { | |
| strncpy(params->primary, primary, IFNAMSIZ); | |
| params->primary[IFNAMSIZ - 1] = 0; | |
| } | |
| memcpy(params->arp_targets, arp_target, sizeof(arp_target)); | |
| return 0; | |
| } | |
| /* Called from registration process */ | |
| static int bond_init(struct net_device *bond_dev) | |
| { | |
| struct bonding *bond = netdev_priv(bond_dev); | |
| struct bond_net *bn = net_generic(dev_net(bond_dev), bond_net_id); | |
| netdev_dbg(bond_dev, "Begin bond_init\n"); | |
| bond->wq = alloc_ordered_workqueue(bond_dev->name, WQ_MEM_RECLAIM); | |
| if (!bond->wq) | |
| return -ENOMEM; | |
| netdev_lockdep_set_classes(bond_dev); | |
| list_add_tail(&bond->bond_list, &bn->dev_list); | |
| bond_prepare_sysfs_group(bond); | |
| bond_debug_register(bond); | |
| /* Ensure valid dev_addr */ | |
| if (is_zero_ether_addr(bond_dev->dev_addr) && | |
| bond_dev->addr_assign_type == NET_ADDR_PERM) | |
| eth_hw_addr_random(bond_dev); | |
| return 0; | |
| } | |
| unsigned int bond_get_num_tx_queues(void) | |
| { | |
| return tx_queues; | |
| } | |
| /* Create a new bond based on the specified name and bonding parameters. | |
| * If name is NULL, obtain a suitable "bond%d" name for us. | |
| * Caller must NOT hold rtnl_lock; we need to release it here before we | |
| * set up our sysfs entries. | |
| */ | |
| int bond_create(struct net *net, const char *name) | |
| { | |
| struct net_device *bond_dev; | |
| struct bonding *bond; | |
| struct alb_bond_info *bond_info; | |
| int res; | |
| rtnl_lock(); | |
| bond_dev = alloc_netdev_mq(sizeof(struct bonding), | |
| name ? name : "bond%d", NET_NAME_UNKNOWN, | |
| bond_setup, tx_queues); | |
| if (!bond_dev) { | |
| pr_err("%s: eek! can't alloc netdev!\n", name); | |
| rtnl_unlock(); | |
| return -ENOMEM; | |
| } | |
| /* | |
| * Initialize rx_hashtbl_used_head to RLB_NULL_INDEX. | |
| * It is set to 0 by default which is wrong. | |
| */ | |
| bond = netdev_priv(bond_dev); | |
| bond_info = &(BOND_ALB_INFO(bond)); | |
| bond_info->rx_hashtbl_used_head = RLB_NULL_INDEX; | |
| dev_net_set(bond_dev, net); | |
| bond_dev->rtnl_link_ops = &bond_link_ops; | |
| res = register_netdevice(bond_dev); | |
| netif_carrier_off(bond_dev); | |
| bond_work_init_all(bond); | |
| rtnl_unlock(); | |
| if (res < 0) | |
| free_netdev(bond_dev); | |
| return res; | |
| } | |
| static int __net_init bond_net_init(struct net *net) | |
| { | |
| struct bond_net *bn = net_generic(net, bond_net_id); | |
| bn->net = net; | |
| INIT_LIST_HEAD(&bn->dev_list); | |
| bond_create_proc_dir(bn); | |
| bond_create_sysfs(bn); | |
| return 0; | |
| } | |
| static void __net_exit bond_net_exit(struct net *net) | |
| { | |
| struct bond_net *bn = net_generic(net, bond_net_id); | |
| struct bonding *bond, *tmp_bond; | |
| LIST_HEAD(list); | |
| bond_destroy_sysfs(bn); | |
| /* Kill off any bonds created after unregistering bond rtnl ops */ | |
| rtnl_lock(); | |
| list_for_each_entry_safe(bond, tmp_bond, &bn->dev_list, bond_list) | |
| unregister_netdevice_queue(bond->dev, &list); | |
| unregister_netdevice_many(&list); | |
| rtnl_unlock(); | |
| bond_destroy_proc_dir(bn); | |
| } | |
| static struct pernet_operations bond_net_ops = { | |
| .init = bond_net_init, | |
| .exit = bond_net_exit, | |
| .id = &bond_net_id, | |
| .size = sizeof(struct bond_net), | |
| }; | |
| static int __init bonding_init(void) | |
| { | |
| int i; | |
| int res; | |
| pr_info("%s", bond_version); | |
| res = bond_check_params(&bonding_defaults); | |
| if (res) | |
| goto out; | |
| res = register_pernet_subsys(&bond_net_ops); | |
| if (res) | |
| goto out; | |
| res = bond_netlink_init(); | |
| if (res) | |
| goto err_link; | |
| bond_create_debugfs(); | |
| for (i = 0; i < max_bonds; i++) { | |
| res = bond_create(&init_net, NULL); | |
| if (res) | |
| goto err; | |
| } | |
| register_netdevice_notifier(&bond_netdev_notifier); | |
| out: | |
| return res; | |
| err: | |
| bond_destroy_debugfs(); | |
| bond_netlink_fini(); | |
| err_link: | |
| unregister_pernet_subsys(&bond_net_ops); | |
| goto out; | |
| } | |
| static void __exit bonding_exit(void) | |
| { | |
| unregister_netdevice_notifier(&bond_netdev_notifier); | |
| bond_destroy_debugfs(); | |
| bond_netlink_fini(); | |
| unregister_pernet_subsys(&bond_net_ops); | |
| #ifdef CONFIG_NET_POLL_CONTROLLER | |
| /* Make sure we don't have an imbalance on our netpoll blocking */ | |
| WARN_ON(atomic_read(&netpoll_block_tx)); | |
| #endif | |
| } | |
| module_init(bonding_init); | |
| module_exit(bonding_exit); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_VERSION(DRV_VERSION); | |
| MODULE_DESCRIPTION(DRV_DESCRIPTION ", v" DRV_VERSION); | |
| MODULE_AUTHOR("Thomas Davis, tadavis@lbl.gov and many others"); |