| /* MCP23S08 SPI/I2C GPIO driver */ | |
| #include <linux/kernel.h> | |
| #include <linux/device.h> | |
| #include <linux/mutex.h> | |
| #include <linux/module.h> | |
| #include <linux/gpio.h> | |
| #include <linux/i2c.h> | |
| #include <linux/spi/spi.h> | |
| #include <linux/spi/mcp23s08.h> | |
| #include <linux/slab.h> | |
| #include <asm/byteorder.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/of_device.h> | |
| #include <linux/regmap.h> | |
| #include <linux/pinctrl/pinctrl.h> | |
| #include <linux/pinctrl/pinconf.h> | |
| #include <linux/pinctrl/pinconf-generic.h> | |
| /* | |
| * MCP types supported by driver | |
| */ | |
| #define MCP_TYPE_S08 0 | |
| #define MCP_TYPE_S17 1 | |
| #define MCP_TYPE_008 2 | |
| #define MCP_TYPE_017 3 | |
| #define MCP_TYPE_S18 4 | |
| #define MCP_MAX_DEV_PER_CS 8 | |
| /* Registers are all 8 bits wide. | |
| * | |
| * The mcp23s17 has twice as many bits, and can be configured to work | |
| * with either 16 bit registers or with two adjacent 8 bit banks. | |
| */ | |
| #define MCP_IODIR 0x00 /* init/reset: all ones */ | |
| #define MCP_IPOL 0x01 | |
| #define MCP_GPINTEN 0x02 | |
| #define MCP_DEFVAL 0x03 | |
| #define MCP_INTCON 0x04 | |
| #define MCP_IOCON 0x05 | |
| # define IOCON_MIRROR (1 << 6) | |
| # define IOCON_SEQOP (1 << 5) | |
| # define IOCON_HAEN (1 << 3) | |
| # define IOCON_ODR (1 << 2) | |
| # define IOCON_INTPOL (1 << 1) | |
| # define IOCON_INTCC (1) | |
| #define MCP_GPPU 0x06 | |
| #define MCP_INTF 0x07 | |
| #define MCP_INTCAP 0x08 | |
| #define MCP_GPIO 0x09 | |
| #define MCP_OLAT 0x0a | |
| struct mcp23s08; | |
| struct mcp23s08 { | |
| u8 addr; | |
| bool irq_active_high; | |
| bool reg_shift; | |
| u16 irq_rise; | |
| u16 irq_fall; | |
| int irq; | |
| bool irq_controller; | |
| int cached_gpio; | |
| /* lock protects regmap access with bypass/cache flags */ | |
| struct mutex lock; | |
| struct gpio_chip chip; | |
| struct regmap *regmap; | |
| struct device *dev; | |
| struct pinctrl_dev *pctldev; | |
| struct pinctrl_desc pinctrl_desc; | |
| }; | |
| static const struct reg_default mcp23x08_defaults[] = { | |
| {.reg = MCP_IODIR, .def = 0xff}, | |
| {.reg = MCP_IPOL, .def = 0x00}, | |
| {.reg = MCP_GPINTEN, .def = 0x00}, | |
| {.reg = MCP_DEFVAL, .def = 0x00}, | |
| {.reg = MCP_INTCON, .def = 0x00}, | |
| {.reg = MCP_IOCON, .def = 0x00}, | |
| {.reg = MCP_GPPU, .def = 0x00}, | |
| {.reg = MCP_OLAT, .def = 0x00}, | |
| }; | |
| static const struct regmap_range mcp23x08_volatile_range = { | |
| .range_min = MCP_INTF, | |
| .range_max = MCP_GPIO, | |
| }; | |
| static const struct regmap_access_table mcp23x08_volatile_table = { | |
| .yes_ranges = &mcp23x08_volatile_range, | |
| .n_yes_ranges = 1, | |
| }; | |
| static const struct regmap_range mcp23x08_precious_range = { | |
| .range_min = MCP_GPIO, | |
| .range_max = MCP_GPIO, | |
| }; | |
| static const struct regmap_access_table mcp23x08_precious_table = { | |
| .yes_ranges = &mcp23x08_precious_range, | |
| .n_yes_ranges = 1, | |
| }; | |
| static const struct regmap_config mcp23x08_regmap = { | |
| .reg_bits = 8, | |
| .val_bits = 8, | |
| .reg_stride = 1, | |
| .volatile_table = &mcp23x08_volatile_table, | |
| .precious_table = &mcp23x08_precious_table, | |
| .reg_defaults = mcp23x08_defaults, | |
| .num_reg_defaults = ARRAY_SIZE(mcp23x08_defaults), | |
| .cache_type = REGCACHE_FLAT, | |
| .max_register = MCP_OLAT, | |
| }; | |
| static const struct reg_default mcp23x16_defaults[] = { | |
| {.reg = MCP_IODIR << 1, .def = 0xffff}, | |
| {.reg = MCP_IPOL << 1, .def = 0x0000}, | |
| {.reg = MCP_GPINTEN << 1, .def = 0x0000}, | |
| {.reg = MCP_DEFVAL << 1, .def = 0x0000}, | |
| {.reg = MCP_INTCON << 1, .def = 0x0000}, | |
| {.reg = MCP_IOCON << 1, .def = 0x0000}, | |
| {.reg = MCP_GPPU << 1, .def = 0x0000}, | |
| {.reg = MCP_OLAT << 1, .def = 0x0000}, | |
| }; | |
| static const struct regmap_range mcp23x16_volatile_range = { | |
| .range_min = MCP_INTF << 1, | |
| .range_max = MCP_GPIO << 1, | |
| }; | |
| static const struct regmap_access_table mcp23x16_volatile_table = { | |
| .yes_ranges = &mcp23x16_volatile_range, | |
| .n_yes_ranges = 1, | |
| }; | |
| static const struct regmap_range mcp23x16_precious_range = { | |
| .range_min = MCP_GPIO << 1, | |
| .range_max = MCP_GPIO << 1, | |
| }; | |
| static const struct regmap_access_table mcp23x16_precious_table = { | |
| .yes_ranges = &mcp23x16_precious_range, | |
| .n_yes_ranges = 1, | |
| }; | |
| static const struct regmap_config mcp23x17_regmap = { | |
| .reg_bits = 8, | |
| .val_bits = 16, | |
| .reg_stride = 2, | |
| .max_register = MCP_OLAT << 1, | |
| .volatile_table = &mcp23x16_volatile_table, | |
| .precious_table = &mcp23x16_precious_table, | |
| .reg_defaults = mcp23x16_defaults, | |
| .num_reg_defaults = ARRAY_SIZE(mcp23x16_defaults), | |
| .cache_type = REGCACHE_FLAT, | |
| .val_format_endian = REGMAP_ENDIAN_LITTLE, | |
| }; | |
| static int mcp_read(struct mcp23s08 *mcp, unsigned int reg, unsigned int *val) | |
| { | |
| return regmap_read(mcp->regmap, reg << mcp->reg_shift, val); | |
| } | |
| static int mcp_write(struct mcp23s08 *mcp, unsigned int reg, unsigned int val) | |
| { | |
| return regmap_write(mcp->regmap, reg << mcp->reg_shift, val); | |
| } | |
| static int mcp_set_mask(struct mcp23s08 *mcp, unsigned int reg, | |
| unsigned int mask, bool enabled) | |
| { | |
| u16 val = enabled ? 0xffff : 0x0000; | |
| return regmap_update_bits(mcp->regmap, reg << mcp->reg_shift, | |
| mask, val); | |
| } | |
| static int mcp_set_bit(struct mcp23s08 *mcp, unsigned int reg, | |
| unsigned int pin, bool enabled) | |
| { | |
| u16 mask = BIT(pin); | |
| return mcp_set_mask(mcp, reg, mask, enabled); | |
| } | |
| static const struct pinctrl_pin_desc mcp23x08_pins[] = { | |
| PINCTRL_PIN(0, "gpio0"), | |
| PINCTRL_PIN(1, "gpio1"), | |
| PINCTRL_PIN(2, "gpio2"), | |
| PINCTRL_PIN(3, "gpio3"), | |
| PINCTRL_PIN(4, "gpio4"), | |
| PINCTRL_PIN(5, "gpio5"), | |
| PINCTRL_PIN(6, "gpio6"), | |
| PINCTRL_PIN(7, "gpio7"), | |
| }; | |
| static const struct pinctrl_pin_desc mcp23x17_pins[] = { | |
| PINCTRL_PIN(0, "gpio0"), | |
| PINCTRL_PIN(1, "gpio1"), | |
| PINCTRL_PIN(2, "gpio2"), | |
| PINCTRL_PIN(3, "gpio3"), | |
| PINCTRL_PIN(4, "gpio4"), | |
| PINCTRL_PIN(5, "gpio5"), | |
| PINCTRL_PIN(6, "gpio6"), | |
| PINCTRL_PIN(7, "gpio7"), | |
| PINCTRL_PIN(8, "gpio8"), | |
| PINCTRL_PIN(9, "gpio9"), | |
| PINCTRL_PIN(10, "gpio10"), | |
| PINCTRL_PIN(11, "gpio11"), | |
| PINCTRL_PIN(12, "gpio12"), | |
| PINCTRL_PIN(13, "gpio13"), | |
| PINCTRL_PIN(14, "gpio14"), | |
| PINCTRL_PIN(15, "gpio15"), | |
| }; | |
| static int mcp_pinctrl_get_groups_count(struct pinctrl_dev *pctldev) | |
| { | |
| return 0; | |
| } | |
| static const char *mcp_pinctrl_get_group_name(struct pinctrl_dev *pctldev, | |
| unsigned int group) | |
| { | |
| return NULL; | |
| } | |
| static int mcp_pinctrl_get_group_pins(struct pinctrl_dev *pctldev, | |
| unsigned int group, | |
| const unsigned int **pins, | |
| unsigned int *num_pins) | |
| { | |
| return -ENOTSUPP; | |
| } | |
| static const struct pinctrl_ops mcp_pinctrl_ops = { | |
| .get_groups_count = mcp_pinctrl_get_groups_count, | |
| .get_group_name = mcp_pinctrl_get_group_name, | |
| .get_group_pins = mcp_pinctrl_get_group_pins, | |
| #ifdef CONFIG_OF | |
| .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, | |
| .dt_free_map = pinconf_generic_dt_free_map, | |
| #endif | |
| }; | |
| static int mcp_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin, | |
| unsigned long *config) | |
| { | |
| struct mcp23s08 *mcp = pinctrl_dev_get_drvdata(pctldev); | |
| enum pin_config_param param = pinconf_to_config_param(*config); | |
| unsigned int data, status; | |
| int ret; | |
| switch (param) { | |
| case PIN_CONFIG_BIAS_PULL_UP: | |
| ret = mcp_read(mcp, MCP_GPPU, &data); | |
| if (ret < 0) | |
| return ret; | |
| status = (data & BIT(pin)) ? 1 : 0; | |
| break; | |
| default: | |
| dev_err(mcp->dev, "Invalid config param %04x\n", param); | |
| return -ENOTSUPP; | |
| } | |
| *config = 0; | |
| return status ? 0 : -EINVAL; | |
| } | |
| static int mcp_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin, | |
| unsigned long *configs, unsigned int num_configs) | |
| { | |
| struct mcp23s08 *mcp = pinctrl_dev_get_drvdata(pctldev); | |
| enum pin_config_param param; | |
| u32 arg, mask; | |
| u16 val; | |
| int ret = 0; | |
| int i; | |
| for (i = 0; i < num_configs; i++) { | |
| param = pinconf_to_config_param(configs[i]); | |
| arg = pinconf_to_config_argument(configs[i]); | |
| switch (param) { | |
| case PIN_CONFIG_BIAS_PULL_UP: | |
| val = arg ? 0xFFFF : 0x0000; | |
| mask = BIT(pin); | |
| ret = mcp_set_bit(mcp, MCP_GPPU, pin, arg); | |
| break; | |
| default: | |
| dev_err(mcp->dev, "Invalid config param %04x\n", param); | |
| return -ENOTSUPP; | |
| } | |
| } | |
| return ret; | |
| } | |
| static const struct pinconf_ops mcp_pinconf_ops = { | |
| .pin_config_get = mcp_pinconf_get, | |
| .pin_config_set = mcp_pinconf_set, | |
| .is_generic = true, | |
| }; | |
| /*----------------------------------------------------------------------*/ | |
| #ifdef CONFIG_SPI_MASTER | |
| static int mcp23sxx_spi_write(void *context, const void *data, size_t count) | |
| { | |
| struct mcp23s08 *mcp = context; | |
| struct spi_device *spi = to_spi_device(mcp->dev); | |
| struct spi_message m; | |
| struct spi_transfer t[2] = { { .tx_buf = &mcp->addr, .len = 1, }, | |
| { .tx_buf = data, .len = count, }, }; | |
| spi_message_init(&m); | |
| spi_message_add_tail(&t[0], &m); | |
| spi_message_add_tail(&t[1], &m); | |
| return spi_sync(spi, &m); | |
| } | |
| static int mcp23sxx_spi_gather_write(void *context, | |
| const void *reg, size_t reg_size, | |
| const void *val, size_t val_size) | |
| { | |
| struct mcp23s08 *mcp = context; | |
| struct spi_device *spi = to_spi_device(mcp->dev); | |
| struct spi_message m; | |
| struct spi_transfer t[3] = { { .tx_buf = &mcp->addr, .len = 1, }, | |
| { .tx_buf = reg, .len = reg_size, }, | |
| { .tx_buf = val, .len = val_size, }, }; | |
| spi_message_init(&m); | |
| spi_message_add_tail(&t[0], &m); | |
| spi_message_add_tail(&t[1], &m); | |
| spi_message_add_tail(&t[2], &m); | |
| return spi_sync(spi, &m); | |
| } | |
| static int mcp23sxx_spi_read(void *context, const void *reg, size_t reg_size, | |
| void *val, size_t val_size) | |
| { | |
| struct mcp23s08 *mcp = context; | |
| struct spi_device *spi = to_spi_device(mcp->dev); | |
| u8 tx[2]; | |
| if (reg_size != 1) | |
| return -EINVAL; | |
| tx[0] = mcp->addr | 0x01; | |
| tx[1] = *((u8 *) reg); | |
| return spi_write_then_read(spi, tx, sizeof(tx), val, val_size); | |
| } | |
| static const struct regmap_bus mcp23sxx_spi_regmap = { | |
| .write = mcp23sxx_spi_write, | |
| .gather_write = mcp23sxx_spi_gather_write, | |
| .read = mcp23sxx_spi_read, | |
| }; | |
| #endif /* CONFIG_SPI_MASTER */ | |
| /*----------------------------------------------------------------------*/ | |
| /* A given spi_device can represent up to eight mcp23sxx chips | |
| * sharing the same chipselect but using different addresses | |
| * (e.g. chips #0 and #3 might be populated, but not #1 or $2). | |
| * Driver data holds all the per-chip data. | |
| */ | |
| struct mcp23s08_driver_data { | |
| unsigned ngpio; | |
| struct mcp23s08 *mcp[8]; | |
| struct mcp23s08 chip[]; | |
| }; | |
| static int mcp23s08_direction_input(struct gpio_chip *chip, unsigned offset) | |
| { | |
| struct mcp23s08 *mcp = gpiochip_get_data(chip); | |
| int status; | |
| mutex_lock(&mcp->lock); | |
| status = mcp_set_bit(mcp, MCP_IODIR, offset, true); | |
| mutex_unlock(&mcp->lock); | |
| return status; | |
| } | |
| static int mcp23s08_get(struct gpio_chip *chip, unsigned offset) | |
| { | |
| struct mcp23s08 *mcp = gpiochip_get_data(chip); | |
| int status, ret; | |
| mutex_lock(&mcp->lock); | |
| /* REVISIT reading this clears any IRQ ... */ | |
| ret = mcp_read(mcp, MCP_GPIO, &status); | |
| if (ret < 0) | |
| status = 0; | |
| else { | |
| mcp->cached_gpio = status; | |
| status = !!(status & (1 << offset)); | |
| } | |
| mutex_unlock(&mcp->lock); | |
| return status; | |
| } | |
| static int __mcp23s08_set(struct mcp23s08 *mcp, unsigned mask, bool value) | |
| { | |
| return mcp_set_mask(mcp, MCP_OLAT, mask, value); | |
| } | |
| static void mcp23s08_set(struct gpio_chip *chip, unsigned offset, int value) | |
| { | |
| struct mcp23s08 *mcp = gpiochip_get_data(chip); | |
| unsigned mask = BIT(offset); | |
| mutex_lock(&mcp->lock); | |
| __mcp23s08_set(mcp, mask, !!value); | |
| mutex_unlock(&mcp->lock); | |
| } | |
| static int | |
| mcp23s08_direction_output(struct gpio_chip *chip, unsigned offset, int value) | |
| { | |
| struct mcp23s08 *mcp = gpiochip_get_data(chip); | |
| unsigned mask = BIT(offset); | |
| int status; | |
| mutex_lock(&mcp->lock); | |
| status = __mcp23s08_set(mcp, mask, value); | |
| if (status == 0) { | |
| status = mcp_set_mask(mcp, MCP_IODIR, mask, false); | |
| } | |
| mutex_unlock(&mcp->lock); | |
| return status; | |
| } | |
| /*----------------------------------------------------------------------*/ | |
| static irqreturn_t mcp23s08_irq(int irq, void *data) | |
| { | |
| struct mcp23s08 *mcp = data; | |
| int intcap, intcon, intf, i, gpio, gpio_orig, intcap_mask, defval; | |
| unsigned int child_irq; | |
| bool intf_set, intcap_changed, gpio_bit_changed, | |
| defval_changed, gpio_set; | |
| mutex_lock(&mcp->lock); | |
| if (mcp_read(mcp, MCP_INTF, &intf) < 0) { | |
| mutex_unlock(&mcp->lock); | |
| return IRQ_HANDLED; | |
| } | |
| if (mcp_read(mcp, MCP_INTCAP, &intcap) < 0) { | |
| mutex_unlock(&mcp->lock); | |
| return IRQ_HANDLED; | |
| } | |
| if (mcp_read(mcp, MCP_INTCON, &intcon) < 0) { | |
| mutex_unlock(&mcp->lock); | |
| return IRQ_HANDLED; | |
| } | |
| if (mcp_read(mcp, MCP_DEFVAL, &defval) < 0) { | |
| mutex_unlock(&mcp->lock); | |
| return IRQ_HANDLED; | |
| } | |
| /* This clears the interrupt(configurable on S18) */ | |
| if (mcp_read(mcp, MCP_GPIO, &gpio) < 0) { | |
| mutex_unlock(&mcp->lock); | |
| return IRQ_HANDLED; | |
| } | |
| gpio_orig = mcp->cached_gpio; | |
| mcp->cached_gpio = gpio; | |
| mutex_unlock(&mcp->lock); | |
| if (intf == 0) { | |
| /* There is no interrupt pending */ | |
| return IRQ_HANDLED; | |
| } | |
| dev_dbg(mcp->chip.parent, | |
| "intcap 0x%04X intf 0x%04X gpio_orig 0x%04X gpio 0x%04X\n", | |
| intcap, intf, gpio_orig, gpio); | |
| for (i = 0; i < mcp->chip.ngpio; i++) { | |
| /* We must check all of the inputs on the chip, | |
| * otherwise we may not notice a change on >=2 pins. | |
| * | |
| * On at least the mcp23s17, INTCAP is only updated | |
| * one byte at a time(INTCAPA and INTCAPB are | |
| * not written to at the same time - only on a per-bank | |
| * basis). | |
| * | |
| * INTF only contains the single bit that caused the | |
| * interrupt per-bank. On the mcp23s17, there is | |
| * INTFA and INTFB. If two pins are changed on the A | |
| * side at the same time, INTF will only have one bit | |
| * set. If one pin on the A side and one pin on the B | |
| * side are changed at the same time, INTF will have | |
| * two bits set. Thus, INTF can't be the only check | |
| * to see if the input has changed. | |
| */ | |
| intf_set = intf & BIT(i); | |
| if (i < 8 && intf_set) | |
| intcap_mask = 0x00FF; | |
| else if (i >= 8 && intf_set) | |
| intcap_mask = 0xFF00; | |
| else | |
| intcap_mask = 0x00; | |
| intcap_changed = (intcap_mask & | |
| (intcap & BIT(i))) != | |
| (intcap_mask & (BIT(i) & gpio_orig)); | |
| gpio_set = BIT(i) & gpio; | |
| gpio_bit_changed = (BIT(i) & gpio_orig) != | |
| (BIT(i) & gpio); | |
| defval_changed = (BIT(i) & intcon) && | |
| ((BIT(i) & gpio) != | |
| (BIT(i) & defval)); | |
| if (((gpio_bit_changed || intcap_changed) && | |
| (BIT(i) & mcp->irq_rise) && gpio_set) || | |
| ((gpio_bit_changed || intcap_changed) && | |
| (BIT(i) & mcp->irq_fall) && !gpio_set) || | |
| defval_changed) { | |
| child_irq = irq_find_mapping(mcp->chip.irqdomain, i); | |
| handle_nested_irq(child_irq); | |
| } | |
| } | |
| return IRQ_HANDLED; | |
| } | |
| static void mcp23s08_irq_mask(struct irq_data *data) | |
| { | |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(data); | |
| struct mcp23s08 *mcp = gpiochip_get_data(gc); | |
| unsigned int pos = data->hwirq; | |
| mcp_set_bit(mcp, MCP_GPINTEN, pos, false); | |
| } | |
| static void mcp23s08_irq_unmask(struct irq_data *data) | |
| { | |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(data); | |
| struct mcp23s08 *mcp = gpiochip_get_data(gc); | |
| unsigned int pos = data->hwirq; | |
| mcp_set_bit(mcp, MCP_GPINTEN, pos, true); | |
| } | |
| static int mcp23s08_irq_set_type(struct irq_data *data, unsigned int type) | |
| { | |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(data); | |
| struct mcp23s08 *mcp = gpiochip_get_data(gc); | |
| unsigned int pos = data->hwirq; | |
| int status = 0; | |
| if ((type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) { | |
| mcp_set_bit(mcp, MCP_INTCON, pos, false); | |
| mcp->irq_rise |= BIT(pos); | |
| mcp->irq_fall |= BIT(pos); | |
| } else if (type & IRQ_TYPE_EDGE_RISING) { | |
| mcp_set_bit(mcp, MCP_INTCON, pos, false); | |
| mcp->irq_rise |= BIT(pos); | |
| mcp->irq_fall &= ~BIT(pos); | |
| } else if (type & IRQ_TYPE_EDGE_FALLING) { | |
| mcp_set_bit(mcp, MCP_INTCON, pos, false); | |
| mcp->irq_rise &= ~BIT(pos); | |
| mcp->irq_fall |= BIT(pos); | |
| } else if (type & IRQ_TYPE_LEVEL_HIGH) { | |
| mcp_set_bit(mcp, MCP_INTCON, pos, true); | |
| mcp_set_bit(mcp, MCP_DEFVAL, pos, false); | |
| } else if (type & IRQ_TYPE_LEVEL_LOW) { | |
| mcp_set_bit(mcp, MCP_INTCON, pos, true); | |
| mcp_set_bit(mcp, MCP_DEFVAL, pos, true); | |
| } else | |
| return -EINVAL; | |
| return status; | |
| } | |
| static void mcp23s08_irq_bus_lock(struct irq_data *data) | |
| { | |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(data); | |
| struct mcp23s08 *mcp = gpiochip_get_data(gc); | |
| mutex_lock(&mcp->lock); | |
| regcache_cache_only(mcp->regmap, true); | |
| } | |
| static void mcp23s08_irq_bus_unlock(struct irq_data *data) | |
| { | |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(data); | |
| struct mcp23s08 *mcp = gpiochip_get_data(gc); | |
| regcache_cache_only(mcp->regmap, false); | |
| regcache_sync(mcp->regmap); | |
| mutex_unlock(&mcp->lock); | |
| } | |
| static struct irq_chip mcp23s08_irq_chip = { | |
| .name = "gpio-mcp23xxx", | |
| .irq_mask = mcp23s08_irq_mask, | |
| .irq_unmask = mcp23s08_irq_unmask, | |
| .irq_set_type = mcp23s08_irq_set_type, | |
| .irq_bus_lock = mcp23s08_irq_bus_lock, | |
| .irq_bus_sync_unlock = mcp23s08_irq_bus_unlock, | |
| }; | |
| static int mcp23s08_irq_setup(struct mcp23s08 *mcp) | |
| { | |
| struct gpio_chip *chip = &mcp->chip; | |
| int err; | |
| unsigned long irqflags = IRQF_ONESHOT | IRQF_SHARED; | |
| if (mcp->irq_active_high) | |
| irqflags |= IRQF_TRIGGER_HIGH; | |
| else | |
| irqflags |= IRQF_TRIGGER_LOW; | |
| err = devm_request_threaded_irq(chip->parent, mcp->irq, NULL, | |
| mcp23s08_irq, | |
| irqflags, dev_name(chip->parent), mcp); | |
| if (err != 0) { | |
| dev_err(chip->parent, "unable to request IRQ#%d: %d\n", | |
| mcp->irq, err); | |
| return err; | |
| } | |
| err = gpiochip_irqchip_add_nested(chip, | |
| &mcp23s08_irq_chip, | |
| 0, | |
| handle_simple_irq, | |
| IRQ_TYPE_NONE); | |
| if (err) { | |
| dev_err(chip->parent, | |
| "could not connect irqchip to gpiochip: %d\n", err); | |
| return err; | |
| } | |
| gpiochip_set_nested_irqchip(chip, | |
| &mcp23s08_irq_chip, | |
| mcp->irq); | |
| return 0; | |
| } | |
| /*----------------------------------------------------------------------*/ | |
| #ifdef CONFIG_DEBUG_FS | |
| #include <linux/seq_file.h> | |
| /* | |
| * This compares the chip's registers with the register | |
| * cache and corrects any incorrectly set register. This | |
| * can be used to fix state for MCP23xxx, that temporary | |
| * lost its power supply. | |
| */ | |
| #define MCP23S08_CONFIG_REGS 8 | |
| static int __check_mcp23s08_reg_cache(struct mcp23s08 *mcp) | |
| { | |
| int cached[MCP23S08_CONFIG_REGS]; | |
| int err = 0, i; | |
| /* read cached config registers */ | |
| for (i = 0; i < MCP23S08_CONFIG_REGS; i++) { | |
| err = mcp_read(mcp, i, &cached[i]); | |
| if (err) | |
| goto out; | |
| } | |
| regcache_cache_bypass(mcp->regmap, true); | |
| for (i = 0; i < MCP23S08_CONFIG_REGS; i++) { | |
| int uncached; | |
| err = mcp_read(mcp, i, &uncached); | |
| if (err) | |
| goto out; | |
| if (uncached != cached[i]) { | |
| dev_err(mcp->dev, "restoring reg 0x%02x from 0x%04x to 0x%04x (power-loss?)\n", | |
| i, uncached, cached[i]); | |
| mcp_write(mcp, i, cached[i]); | |
| } | |
| } | |
| out: | |
| if (err) | |
| dev_err(mcp->dev, "read error: reg=%02x, err=%d", i, err); | |
| regcache_cache_bypass(mcp->regmap, false); | |
| return err; | |
| } | |
| /* | |
| * This shows more info than the generic gpio dump code: | |
| * pullups, deglitching, open drain drive. | |
| */ | |
| static void mcp23s08_dbg_show(struct seq_file *s, struct gpio_chip *chip) | |
| { | |
| struct mcp23s08 *mcp; | |
| char bank; | |
| int t; | |
| unsigned mask; | |
| int iodir, gpio, gppu; | |
| mcp = gpiochip_get_data(chip); | |
| /* NOTE: we only handle one bank for now ... */ | |
| bank = '0' + ((mcp->addr >> 1) & 0x7); | |
| mutex_lock(&mcp->lock); | |
| t = __check_mcp23s08_reg_cache(mcp); | |
| if (t) { | |
| seq_printf(s, " I/O Error\n"); | |
| goto done; | |
| } | |
| t = mcp_read(mcp, MCP_IODIR, &iodir); | |
| if (t) { | |
| seq_printf(s, " I/O Error\n"); | |
| goto done; | |
| } | |
| t = mcp_read(mcp, MCP_GPIO, &gpio); | |
| if (t) { | |
| seq_printf(s, " I/O Error\n"); | |
| goto done; | |
| } | |
| t = mcp_read(mcp, MCP_GPPU, &gppu); | |
| if (t) { | |
| seq_printf(s, " I/O Error\n"); | |
| goto done; | |
| } | |
| for (t = 0, mask = BIT(0); t < chip->ngpio; t++, mask <<= 1) { | |
| const char *label; | |
| label = gpiochip_is_requested(chip, t); | |
| if (!label) | |
| continue; | |
| seq_printf(s, " gpio-%-3d P%c.%d (%-12s) %s %s %s", | |
| chip->base + t, bank, t, label, | |
| (iodir & mask) ? "in " : "out", | |
| (gpio & mask) ? "hi" : "lo", | |
| (gppu & mask) ? "up" : " "); | |
| /* NOTE: ignoring the irq-related registers */ | |
| seq_puts(s, "\n"); | |
| } | |
| done: | |
| mutex_unlock(&mcp->lock); | |
| } | |
| #else | |
| #define mcp23s08_dbg_show NULL | |
| #endif | |
| /*----------------------------------------------------------------------*/ | |
| static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev, | |
| void *data, unsigned addr, unsigned type, | |
| unsigned int base, int cs) | |
| { | |
| int status, ret; | |
| bool mirror = false; | |
| mutex_init(&mcp->lock); | |
| mcp->dev = dev; | |
| mcp->addr = addr; | |
| mcp->irq_active_high = false; | |
| mcp->chip.direction_input = mcp23s08_direction_input; | |
| mcp->chip.get = mcp23s08_get; | |
| mcp->chip.direction_output = mcp23s08_direction_output; | |
| mcp->chip.set = mcp23s08_set; | |
| mcp->chip.dbg_show = mcp23s08_dbg_show; | |
| #ifdef CONFIG_OF_GPIO | |
| mcp->chip.of_gpio_n_cells = 2; | |
| mcp->chip.of_node = dev->of_node; | |
| #endif | |
| switch (type) { | |
| #ifdef CONFIG_SPI_MASTER | |
| case MCP_TYPE_S08: | |
| mcp->regmap = devm_regmap_init(dev, &mcp23sxx_spi_regmap, mcp, | |
| &mcp23x08_regmap); | |
| mcp->reg_shift = 0; | |
| mcp->chip.ngpio = 8; | |
| mcp->chip.label = "mcp23s08"; | |
| break; | |
| case MCP_TYPE_S17: | |
| mcp->regmap = devm_regmap_init(dev, &mcp23sxx_spi_regmap, mcp, | |
| &mcp23x17_regmap); | |
| mcp->reg_shift = 1; | |
| mcp->chip.ngpio = 16; | |
| mcp->chip.label = "mcp23s17"; | |
| break; | |
| case MCP_TYPE_S18: | |
| mcp->regmap = devm_regmap_init(dev, &mcp23sxx_spi_regmap, mcp, | |
| &mcp23x17_regmap); | |
| mcp->reg_shift = 1; | |
| mcp->chip.ngpio = 16; | |
| mcp->chip.label = "mcp23s18"; | |
| break; | |
| #endif /* CONFIG_SPI_MASTER */ | |
| #if IS_ENABLED(CONFIG_I2C) | |
| case MCP_TYPE_008: | |
| mcp->regmap = devm_regmap_init_i2c(data, &mcp23x08_regmap); | |
| mcp->reg_shift = 0; | |
| mcp->chip.ngpio = 8; | |
| mcp->chip.label = "mcp23008"; | |
| break; | |
| case MCP_TYPE_017: | |
| mcp->regmap = devm_regmap_init_i2c(data, &mcp23x17_regmap); | |
| mcp->reg_shift = 1; | |
| mcp->chip.ngpio = 16; | |
| mcp->chip.label = "mcp23017"; | |
| break; | |
| #endif /* CONFIG_I2C */ | |
| default: | |
| dev_err(dev, "invalid device type (%d)\n", type); | |
| return -EINVAL; | |
| } | |
| if (IS_ERR(mcp->regmap)) | |
| return PTR_ERR(mcp->regmap); | |
| mcp->chip.base = base; | |
| mcp->chip.can_sleep = true; | |
| mcp->chip.parent = dev; | |
| mcp->chip.owner = THIS_MODULE; | |
| /* verify MCP_IOCON.SEQOP = 0, so sequential reads work, | |
| * and MCP_IOCON.HAEN = 1, so we work with all chips. | |
| */ | |
| ret = mcp_read(mcp, MCP_IOCON, &status); | |
| if (ret < 0) | |
| goto fail; | |
| mcp->irq_controller = | |
| device_property_read_bool(dev, "interrupt-controller"); | |
| if (mcp->irq && mcp->irq_controller) { | |
| mcp->irq_active_high = | |
| device_property_read_bool(dev, | |
| "microchip,irq-active-high"); | |
| mirror = device_property_read_bool(dev, "microchip,irq-mirror"); | |
| } | |
| if ((status & IOCON_SEQOP) || !(status & IOCON_HAEN) || mirror || | |
| mcp->irq_active_high) { | |
| /* mcp23s17 has IOCON twice, make sure they are in sync */ | |
| status &= ~(IOCON_SEQOP | (IOCON_SEQOP << 8)); | |
| status |= IOCON_HAEN | (IOCON_HAEN << 8); | |
| if (mcp->irq_active_high) | |
| status |= IOCON_INTPOL | (IOCON_INTPOL << 8); | |
| else | |
| status &= ~(IOCON_INTPOL | (IOCON_INTPOL << 8)); | |
| if (mirror) | |
| status |= IOCON_MIRROR | (IOCON_MIRROR << 8); | |
| if (type == MCP_TYPE_S18) | |
| status |= IOCON_INTCC | (IOCON_INTCC << 8); | |
| ret = mcp_write(mcp, MCP_IOCON, status); | |
| if (ret < 0) | |
| goto fail; | |
| } | |
| ret = devm_gpiochip_add_data(dev, &mcp->chip, mcp); | |
| if (ret < 0) | |
| goto fail; | |
| if (mcp->irq && mcp->irq_controller) { | |
| ret = mcp23s08_irq_setup(mcp); | |
| if (ret) | |
| goto fail; | |
| } | |
| mcp->pinctrl_desc.name = "mcp23xxx-pinctrl"; | |
| mcp->pinctrl_desc.pctlops = &mcp_pinctrl_ops; | |
| mcp->pinctrl_desc.confops = &mcp_pinconf_ops; | |
| mcp->pinctrl_desc.npins = mcp->chip.ngpio; | |
| if (mcp->pinctrl_desc.npins == 8) | |
| mcp->pinctrl_desc.pins = mcp23x08_pins; | |
| else if (mcp->pinctrl_desc.npins == 16) | |
| mcp->pinctrl_desc.pins = mcp23x17_pins; | |
| mcp->pinctrl_desc.owner = THIS_MODULE; | |
| mcp->pctldev = devm_pinctrl_register(dev, &mcp->pinctrl_desc, mcp); | |
| if (IS_ERR(mcp->pctldev)) { | |
| ret = PTR_ERR(mcp->pctldev); | |
| goto fail; | |
| } | |
| fail: | |
| if (ret < 0) | |
| dev_dbg(dev, "can't setup chip %d, --> %d\n", addr, ret); | |
| return ret; | |
| } | |
| /*----------------------------------------------------------------------*/ | |
| #ifdef CONFIG_OF | |
| #ifdef CONFIG_SPI_MASTER | |
| static const struct of_device_id mcp23s08_spi_of_match[] = { | |
| { | |
| .compatible = "microchip,mcp23s08", | |
| .data = (void *) MCP_TYPE_S08, | |
| }, | |
| { | |
| .compatible = "microchip,mcp23s17", | |
| .data = (void *) MCP_TYPE_S17, | |
| }, | |
| { | |
| .compatible = "microchip,mcp23s18", | |
| .data = (void *) MCP_TYPE_S18, | |
| }, | |
| /* NOTE: The use of the mcp prefix is deprecated and will be removed. */ | |
| { | |
| .compatible = "mcp,mcp23s08", | |
| .data = (void *) MCP_TYPE_S08, | |
| }, | |
| { | |
| .compatible = "mcp,mcp23s17", | |
| .data = (void *) MCP_TYPE_S17, | |
| }, | |
| { }, | |
| }; | |
| MODULE_DEVICE_TABLE(of, mcp23s08_spi_of_match); | |
| #endif | |
| #if IS_ENABLED(CONFIG_I2C) | |
| static const struct of_device_id mcp23s08_i2c_of_match[] = { | |
| { | |
| .compatible = "microchip,mcp23008", | |
| .data = (void *) MCP_TYPE_008, | |
| }, | |
| { | |
| .compatible = "microchip,mcp23017", | |
| .data = (void *) MCP_TYPE_017, | |
| }, | |
| /* NOTE: The use of the mcp prefix is deprecated and will be removed. */ | |
| { | |
| .compatible = "mcp,mcp23008", | |
| .data = (void *) MCP_TYPE_008, | |
| }, | |
| { | |
| .compatible = "mcp,mcp23017", | |
| .data = (void *) MCP_TYPE_017, | |
| }, | |
| { }, | |
| }; | |
| MODULE_DEVICE_TABLE(of, mcp23s08_i2c_of_match); | |
| #endif | |
| #endif /* CONFIG_OF */ | |
| #if IS_ENABLED(CONFIG_I2C) | |
| static int mcp230xx_probe(struct i2c_client *client, | |
| const struct i2c_device_id *id) | |
| { | |
| struct mcp23s08_platform_data *pdata, local_pdata; | |
| struct mcp23s08 *mcp; | |
| int status; | |
| pdata = dev_get_platdata(&client->dev); | |
| if (!pdata) { | |
| pdata = &local_pdata; | |
| pdata->base = -1; | |
| } | |
| mcp = devm_kzalloc(&client->dev, sizeof(*mcp), GFP_KERNEL); | |
| if (!mcp) | |
| return -ENOMEM; | |
| mcp->irq = client->irq; | |
| status = mcp23s08_probe_one(mcp, &client->dev, client, client->addr, | |
| id->driver_data, pdata->base, 0); | |
| if (status) | |
| return status; | |
| i2c_set_clientdata(client, mcp); | |
| return 0; | |
| } | |
| static const struct i2c_device_id mcp230xx_id[] = { | |
| { "mcp23008", MCP_TYPE_008 }, | |
| { "mcp23017", MCP_TYPE_017 }, | |
| { }, | |
| }; | |
| MODULE_DEVICE_TABLE(i2c, mcp230xx_id); | |
| static struct i2c_driver mcp230xx_driver = { | |
| .driver = { | |
| .name = "mcp230xx", | |
| .of_match_table = of_match_ptr(mcp23s08_i2c_of_match), | |
| }, | |
| .probe = mcp230xx_probe, | |
| .id_table = mcp230xx_id, | |
| }; | |
| static int __init mcp23s08_i2c_init(void) | |
| { | |
| return i2c_add_driver(&mcp230xx_driver); | |
| } | |
| static void mcp23s08_i2c_exit(void) | |
| { | |
| i2c_del_driver(&mcp230xx_driver); | |
| } | |
| #else | |
| static int __init mcp23s08_i2c_init(void) { return 0; } | |
| static void mcp23s08_i2c_exit(void) { } | |
| #endif /* CONFIG_I2C */ | |
| /*----------------------------------------------------------------------*/ | |
| #ifdef CONFIG_SPI_MASTER | |
| static int mcp23s08_probe(struct spi_device *spi) | |
| { | |
| struct mcp23s08_platform_data *pdata, local_pdata; | |
| unsigned addr; | |
| int chips = 0; | |
| struct mcp23s08_driver_data *data; | |
| int status, type; | |
| unsigned ngpio = 0; | |
| const struct of_device_id *match; | |
| match = of_match_device(of_match_ptr(mcp23s08_spi_of_match), &spi->dev); | |
| if (match) | |
| type = (int)(uintptr_t)match->data; | |
| else | |
| type = spi_get_device_id(spi)->driver_data; | |
| pdata = dev_get_platdata(&spi->dev); | |
| if (!pdata) { | |
| pdata = &local_pdata; | |
| pdata->base = -1; | |
| status = device_property_read_u32(&spi->dev, | |
| "microchip,spi-present-mask", &pdata->spi_present_mask); | |
| if (status) { | |
| status = device_property_read_u32(&spi->dev, | |
| "mcp,spi-present-mask", | |
| &pdata->spi_present_mask); | |
| if (status) { | |
| dev_err(&spi->dev, "missing spi-present-mask"); | |
| return -ENODEV; | |
| } | |
| } | |
| } | |
| if (!pdata->spi_present_mask || pdata->spi_present_mask > 0xff) { | |
| dev_err(&spi->dev, "invalid spi-present-mask"); | |
| return -ENODEV; | |
| } | |
| for (addr = 0; addr < MCP_MAX_DEV_PER_CS; addr++) { | |
| if (pdata->spi_present_mask & BIT(addr)) | |
| chips++; | |
| } | |
| if (!chips) | |
| return -ENODEV; | |
| data = devm_kzalloc(&spi->dev, | |
| sizeof(*data) + chips * sizeof(struct mcp23s08), | |
| GFP_KERNEL); | |
| if (!data) | |
| return -ENOMEM; | |
| spi_set_drvdata(spi, data); | |
| for (addr = 0; addr < MCP_MAX_DEV_PER_CS; addr++) { | |
| if (!(pdata->spi_present_mask & BIT(addr))) | |
| continue; | |
| chips--; | |
| data->mcp[addr] = &data->chip[chips]; | |
| data->mcp[addr]->irq = spi->irq; | |
| status = mcp23s08_probe_one(data->mcp[addr], &spi->dev, spi, | |
| 0x40 | (addr << 1), type, | |
| pdata->base, addr); | |
| if (status < 0) | |
| return status; | |
| if (pdata->base != -1) | |
| pdata->base += data->mcp[addr]->chip.ngpio; | |
| ngpio += data->mcp[addr]->chip.ngpio; | |
| } | |
| data->ngpio = ngpio; | |
| return 0; | |
| } | |
| static const struct spi_device_id mcp23s08_ids[] = { | |
| { "mcp23s08", MCP_TYPE_S08 }, | |
| { "mcp23s17", MCP_TYPE_S17 }, | |
| { "mcp23s18", MCP_TYPE_S18 }, | |
| { }, | |
| }; | |
| MODULE_DEVICE_TABLE(spi, mcp23s08_ids); | |
| static struct spi_driver mcp23s08_driver = { | |
| .probe = mcp23s08_probe, | |
| .id_table = mcp23s08_ids, | |
| .driver = { | |
| .name = "mcp23s08", | |
| .of_match_table = of_match_ptr(mcp23s08_spi_of_match), | |
| }, | |
| }; | |
| static int __init mcp23s08_spi_init(void) | |
| { | |
| return spi_register_driver(&mcp23s08_driver); | |
| } | |
| static void mcp23s08_spi_exit(void) | |
| { | |
| spi_unregister_driver(&mcp23s08_driver); | |
| } | |
| #else | |
| static int __init mcp23s08_spi_init(void) { return 0; } | |
| static void mcp23s08_spi_exit(void) { } | |
| #endif /* CONFIG_SPI_MASTER */ | |
| /*----------------------------------------------------------------------*/ | |
| static int __init mcp23s08_init(void) | |
| { | |
| int ret; | |
| ret = mcp23s08_spi_init(); | |
| if (ret) | |
| goto spi_fail; | |
| ret = mcp23s08_i2c_init(); | |
| if (ret) | |
| goto i2c_fail; | |
| return 0; | |
| i2c_fail: | |
| mcp23s08_spi_exit(); | |
| spi_fail: | |
| return ret; | |
| } | |
| /* register after spi/i2c postcore initcall and before | |
| * subsys initcalls that may rely on these GPIOs | |
| */ | |
| subsys_initcall(mcp23s08_init); | |
| static void __exit mcp23s08_exit(void) | |
| { | |
| mcp23s08_spi_exit(); | |
| mcp23s08_i2c_exit(); | |
| } | |
| module_exit(mcp23s08_exit); | |
| MODULE_LICENSE("GPL"); |