| /* | |
| * Silead touchscreen driver DMI based configuration code | |
| * | |
| * Copyright (c) 2017 Red Hat Inc. | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * Red Hat authors: | |
| * Hans de Goede <hdegoede@redhat.com> | |
| */ | |
| #include <linux/acpi.h> | |
| #include <linux/device.h> | |
| #include <linux/dmi.h> | |
| #include <linux/i2c.h> | |
| #include <linux/notifier.h> | |
| #include <linux/property.h> | |
| #include <linux/string.h> | |
| struct silead_ts_dmi_data { | |
| const char *acpi_name; | |
| const struct property_entry *properties; | |
| }; | |
| static const struct property_entry cube_iwork8_air_props[] = { | |
| PROPERTY_ENTRY_U32("touchscreen-size-x", 1660), | |
| PROPERTY_ENTRY_U32("touchscreen-size-y", 900), | |
| PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), | |
| PROPERTY_ENTRY_STRING("firmware-name", "gsl3670-cube-iwork8-air.fw"), | |
| PROPERTY_ENTRY_U32("silead,max-fingers", 10), | |
| { } | |
| }; | |
| static const struct silead_ts_dmi_data cube_iwork8_air_data = { | |
| .acpi_name = "MSSL1680:00", | |
| .properties = cube_iwork8_air_props, | |
| }; | |
| static const struct property_entry jumper_ezpad_mini3_props[] = { | |
| PROPERTY_ENTRY_U32("touchscreen-size-x", 1700), | |
| PROPERTY_ENTRY_U32("touchscreen-size-y", 1150), | |
| PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), | |
| PROPERTY_ENTRY_STRING("firmware-name", "gsl3676-jumper-ezpad-mini3.fw"), | |
| PROPERTY_ENTRY_U32("silead,max-fingers", 10), | |
| { } | |
| }; | |
| static const struct silead_ts_dmi_data jumper_ezpad_mini3_data = { | |
| .acpi_name = "MSSL1680:00", | |
| .properties = jumper_ezpad_mini3_props, | |
| }; | |
| static const struct property_entry dexp_ursus_7w_props[] = { | |
| PROPERTY_ENTRY_U32("touchscreen-size-x", 890), | |
| PROPERTY_ENTRY_U32("touchscreen-size-y", 630), | |
| PROPERTY_ENTRY_STRING("firmware-name", "gsl1686-dexp-ursus-7w.fw"), | |
| PROPERTY_ENTRY_U32("silead,max-fingers", 10), | |
| { } | |
| }; | |
| static const struct silead_ts_dmi_data dexp_ursus_7w_data = { | |
| .acpi_name = "MSSL1680:00", | |
| .properties = dexp_ursus_7w_props, | |
| }; | |
| static const struct property_entry surftab_wintron70_st70416_6_props[] = { | |
| PROPERTY_ENTRY_U32("touchscreen-size-x", 884), | |
| PROPERTY_ENTRY_U32("touchscreen-size-y", 632), | |
| PROPERTY_ENTRY_STRING("firmware-name", | |
| "gsl1686-surftab-wintron70-st70416-6.fw"), | |
| PROPERTY_ENTRY_U32("silead,max-fingers", 10), | |
| { } | |
| }; | |
| static const struct silead_ts_dmi_data surftab_wintron70_st70416_6_data = { | |
| .acpi_name = "MSSL1680:00", | |
| .properties = surftab_wintron70_st70416_6_props, | |
| }; | |
| static const struct property_entry gp_electronic_t701_props[] = { | |
| PROPERTY_ENTRY_U32("touchscreen-size-x", 960), | |
| PROPERTY_ENTRY_U32("touchscreen-size-y", 640), | |
| PROPERTY_ENTRY_STRING("firmware-name", | |
| "gsl1680-gp-electronic-t701.fw"), | |
| { } | |
| }; | |
| static const struct silead_ts_dmi_data gp_electronic_t701_data = { | |
| .acpi_name = "MSSL1680:00", | |
| .properties = gp_electronic_t701_props, | |
| }; | |
| static const struct property_entry pipo_w2s_props[] = { | |
| PROPERTY_ENTRY_U32("touchscreen-size-x", 1660), | |
| PROPERTY_ENTRY_U32("touchscreen-size-y", 880), | |
| PROPERTY_ENTRY_BOOL("touchscreen-inverted-x"), | |
| PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), | |
| PROPERTY_ENTRY_STRING("firmware-name", | |
| "gsl1680-pipo-w2s.fw"), | |
| { } | |
| }; | |
| static const struct silead_ts_dmi_data pipo_w2s_data = { | |
| .acpi_name = "MSSL1680:00", | |
| .properties = pipo_w2s_props, | |
| }; | |
| static const struct property_entry pov_mobii_wintab_p800w_props[] = { | |
| PROPERTY_ENTRY_U32("touchscreen-size-x", 1800), | |
| PROPERTY_ENTRY_U32("touchscreen-size-y", 1150), | |
| PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), | |
| PROPERTY_ENTRY_STRING("firmware-name", | |
| "gsl3692-pov-mobii-wintab-p800w.fw"), | |
| { } | |
| }; | |
| static const struct silead_ts_dmi_data pov_mobii_wintab_p800w_data = { | |
| .acpi_name = "MSSL1680:00", | |
| .properties = pov_mobii_wintab_p800w_props, | |
| }; | |
| static const struct property_entry itworks_tw891_props[] = { | |
| PROPERTY_ENTRY_U32("touchscreen-size-x", 1600), | |
| PROPERTY_ENTRY_U32("touchscreen-size-y", 890), | |
| PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), | |
| PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), | |
| PROPERTY_ENTRY_STRING("firmware-name", "gsl3670-itworks-tw891.fw"), | |
| { } | |
| }; | |
| static const struct silead_ts_dmi_data itworks_tw891_data = { | |
| .acpi_name = "MSSL1680:00", | |
| .properties = itworks_tw891_props, | |
| }; | |
| static const struct dmi_system_id silead_ts_dmi_table[] = { | |
| { | |
| /* CUBE iwork8 Air */ | |
| .driver_data = (void *)&cube_iwork8_air_data, | |
| .matches = { | |
| DMI_MATCH(DMI_SYS_VENDOR, "cube"), | |
| DMI_MATCH(DMI_PRODUCT_NAME, "i1-TF"), | |
| DMI_MATCH(DMI_BOARD_NAME, "Cherry Trail CR"), | |
| }, | |
| }, | |
| { | |
| /* Jumper EZpad mini3 */ | |
| .driver_data = (void *)&jumper_ezpad_mini3_data, | |
| .matches = { | |
| DMI_MATCH(DMI_SYS_VENDOR, "Insyde"), | |
| /* jumperx.T87.KFBNEEA02 with the version-nr dropped */ | |
| DMI_MATCH(DMI_BIOS_VERSION, "jumperx.T87.KFBNEEA"), | |
| }, | |
| }, | |
| { | |
| /* DEXP Ursus 7W */ | |
| .driver_data = (void *)&dexp_ursus_7w_data, | |
| .matches = { | |
| DMI_MATCH(DMI_SYS_VENDOR, "Insyde"), | |
| DMI_MATCH(DMI_PRODUCT_NAME, "7W"), | |
| }, | |
| }, | |
| { | |
| /* Trekstor Surftab Wintron 7.0 ST70416-6 */ | |
| .driver_data = (void *)&surftab_wintron70_st70416_6_data, | |
| .matches = { | |
| DMI_MATCH(DMI_SYS_VENDOR, "Insyde"), | |
| DMI_MATCH(DMI_PRODUCT_NAME, "ST70416-6"), | |
| /* Exact match, different versions need different fw */ | |
| DMI_MATCH(DMI_BIOS_VERSION, "TREK.G.WI71C.JGBMRBA04"), | |
| }, | |
| }, | |
| { | |
| /* Ployer Momo7w (same hardware as the Trekstor ST70416-6) */ | |
| .driver_data = (void *)&surftab_wintron70_st70416_6_data, | |
| .matches = { | |
| DMI_MATCH(DMI_SYS_VENDOR, "Shenzhen PLOYER"), | |
| DMI_MATCH(DMI_PRODUCT_NAME, "MOMO7W"), | |
| /* Exact match, different versions need different fw */ | |
| DMI_MATCH(DMI_BIOS_VERSION, "MOMO.G.WI71C.MABMRBA02"), | |
| }, | |
| }, | |
| { | |
| /* GP-electronic T701 */ | |
| .driver_data = (void *)&gp_electronic_t701_data, | |
| .matches = { | |
| DMI_MATCH(DMI_SYS_VENDOR, "Insyde"), | |
| DMI_MATCH(DMI_PRODUCT_NAME, "T701"), | |
| DMI_MATCH(DMI_BIOS_VERSION, "BYT70A.YNCHENG.WIN.007"), | |
| }, | |
| }, | |
| { | |
| /* Pipo W2S */ | |
| .driver_data = (void *)&pipo_w2s_data, | |
| .matches = { | |
| DMI_MATCH(DMI_SYS_VENDOR, "PIPO"), | |
| DMI_MATCH(DMI_PRODUCT_NAME, "W2S"), | |
| }, | |
| }, | |
| { | |
| /* Point of View mobii wintab p800w */ | |
| .driver_data = (void *)&pov_mobii_wintab_p800w_data, | |
| .matches = { | |
| DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"), | |
| DMI_MATCH(DMI_BOARD_NAME, "Aptio CRB"), | |
| DMI_MATCH(DMI_BIOS_VERSION, "3BAIR1013"), | |
| /* Above matches are too generic, add bios-date match */ | |
| DMI_MATCH(DMI_BIOS_DATE, "08/22/2014"), | |
| }, | |
| }, | |
| { | |
| /* I.T.Works TW891 */ | |
| .driver_data = (void *)&itworks_tw891_data, | |
| .matches = { | |
| DMI_MATCH(DMI_SYS_VENDOR, "To be filled by O.E.M."), | |
| DMI_MATCH(DMI_PRODUCT_NAME, "TW891"), | |
| }, | |
| }, | |
| { }, | |
| }; | |
| static const struct silead_ts_dmi_data *silead_ts_data; | |
| static void silead_ts_dmi_add_props(struct i2c_client *client) | |
| { | |
| struct device *dev = &client->dev; | |
| int error; | |
| if (has_acpi_companion(dev) && | |
| !strncmp(silead_ts_data->acpi_name, client->name, I2C_NAME_SIZE)) { | |
| error = device_add_properties(dev, silead_ts_data->properties); | |
| if (error) | |
| dev_err(dev, "failed to add properties: %d\n", error); | |
| } | |
| } | |
| static int silead_ts_dmi_notifier_call(struct notifier_block *nb, | |
| unsigned long action, void *data) | |
| { | |
| struct device *dev = data; | |
| struct i2c_client *client; | |
| switch (action) { | |
| case BUS_NOTIFY_ADD_DEVICE: | |
| client = i2c_verify_client(dev); | |
| if (client) | |
| silead_ts_dmi_add_props(client); | |
| break; | |
| default: | |
| break; | |
| } | |
| return 0; | |
| } | |
| static struct notifier_block silead_ts_dmi_notifier = { | |
| .notifier_call = silead_ts_dmi_notifier_call, | |
| }; | |
| static int __init silead_ts_dmi_init(void) | |
| { | |
| const struct dmi_system_id *dmi_id; | |
| int error; | |
| dmi_id = dmi_first_match(silead_ts_dmi_table); | |
| if (!dmi_id) | |
| return 0; /* Not an error */ | |
| silead_ts_data = dmi_id->driver_data; | |
| error = bus_register_notifier(&i2c_bus_type, &silead_ts_dmi_notifier); | |
| if (error) | |
| pr_err("%s: failed to register i2c bus notifier: %d\n", | |
| __func__, error); | |
| return error; | |
| } | |
| /* | |
| * We are registering out notifier after i2c core is initialized and i2c bus | |
| * itself is ready (which happens at postcore initcall level), but before | |
| * ACPI starts enumerating devices (at subsys initcall level). | |
| */ | |
| arch_initcall(silead_ts_dmi_init); |