| /* | |
| * basic function of the tape device driver | |
| * | |
| * S390 and zSeries version | |
| * Copyright IBM Corp. 2001, 2009 | |
| * Author(s): Carsten Otte <cotte@de.ibm.com> | |
| * Michael Holzheu <holzheu@de.ibm.com> | |
| * Tuan Ngo-Anh <ngoanh@de.ibm.com> | |
| * Martin Schwidefsky <schwidefsky@de.ibm.com> | |
| * Stefan Bader <shbader@de.ibm.com> | |
| */ | |
| #define KMSG_COMPONENT "tape" | |
| #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt | |
| #include <linux/module.h> | |
| #include <linux/init.h> // for kernel parameters | |
| #include <linux/kmod.h> // for requesting modules | |
| #include <linux/spinlock.h> // for locks | |
| #include <linux/vmalloc.h> | |
| #include <linux/list.h> | |
| #include <linux/slab.h> | |
| #include <asm/types.h> // for variable types | |
| #define TAPE_DBF_AREA tape_core_dbf | |
| #include "tape.h" | |
| #include "tape_std.h" | |
| #define LONG_BUSY_TIMEOUT 180 /* seconds */ | |
| static void __tape_do_irq (struct ccw_device *, unsigned long, struct irb *); | |
| static void tape_delayed_next_request(struct work_struct *); | |
| static void tape_long_busy_timeout(unsigned long data); | |
| /* | |
| * One list to contain all tape devices of all disciplines, so | |
| * we can assign the devices to minor numbers of the same major | |
| * The list is protected by the rwlock | |
| */ | |
| static LIST_HEAD(tape_device_list); | |
| static DEFINE_RWLOCK(tape_device_lock); | |
| /* | |
| * Pointer to debug area. | |
| */ | |
| debug_info_t *TAPE_DBF_AREA = NULL; | |
| EXPORT_SYMBOL(TAPE_DBF_AREA); | |
| /* | |
| * Printable strings for tape enumerations. | |
| */ | |
| const char *tape_state_verbose[TS_SIZE] = | |
| { | |
| [TS_UNUSED] = "UNUSED", | |
| [TS_IN_USE] = "IN_USE", | |
| [TS_BLKUSE] = "BLKUSE", | |
| [TS_INIT] = "INIT ", | |
| [TS_NOT_OPER] = "NOT_OP" | |
| }; | |
| const char *tape_op_verbose[TO_SIZE] = | |
| { | |
| [TO_BLOCK] = "BLK", [TO_BSB] = "BSB", | |
| [TO_BSF] = "BSF", [TO_DSE] = "DSE", | |
| [TO_FSB] = "FSB", [TO_FSF] = "FSF", | |
| [TO_LBL] = "LBL", [TO_NOP] = "NOP", | |
| [TO_RBA] = "RBA", [TO_RBI] = "RBI", | |
| [TO_RFO] = "RFO", [TO_REW] = "REW", | |
| [TO_RUN] = "RUN", [TO_WRI] = "WRI", | |
| [TO_WTM] = "WTM", [TO_MSEN] = "MSN", | |
| [TO_LOAD] = "LOA", [TO_READ_CONFIG] = "RCF", | |
| [TO_READ_ATTMSG] = "RAT", | |
| [TO_DIS] = "DIS", [TO_ASSIGN] = "ASS", | |
| [TO_UNASSIGN] = "UAS", [TO_CRYPT_ON] = "CON", | |
| [TO_CRYPT_OFF] = "COF", [TO_KEKL_SET] = "KLS", | |
| [TO_KEKL_QUERY] = "KLQ",[TO_RDC] = "RDC", | |
| }; | |
| static int devid_to_int(struct ccw_dev_id *dev_id) | |
| { | |
| return dev_id->devno + (dev_id->ssid << 16); | |
| } | |
| /* | |
| * Some channel attached tape specific attributes. | |
| * | |
| * FIXME: In the future the first_minor and blocksize attribute should be | |
| * replaced by a link to the cdev tree. | |
| */ | |
| static ssize_t | |
| tape_medium_state_show(struct device *dev, struct device_attribute *attr, char *buf) | |
| { | |
| struct tape_device *tdev; | |
| tdev = dev_get_drvdata(dev); | |
| return scnprintf(buf, PAGE_SIZE, "%i\n", tdev->medium_state); | |
| } | |
| static | |
| DEVICE_ATTR(medium_state, 0444, tape_medium_state_show, NULL); | |
| static ssize_t | |
| tape_first_minor_show(struct device *dev, struct device_attribute *attr, char *buf) | |
| { | |
| struct tape_device *tdev; | |
| tdev = dev_get_drvdata(dev); | |
| return scnprintf(buf, PAGE_SIZE, "%i\n", tdev->first_minor); | |
| } | |
| static | |
| DEVICE_ATTR(first_minor, 0444, tape_first_minor_show, NULL); | |
| static ssize_t | |
| tape_state_show(struct device *dev, struct device_attribute *attr, char *buf) | |
| { | |
| struct tape_device *tdev; | |
| tdev = dev_get_drvdata(dev); | |
| return scnprintf(buf, PAGE_SIZE, "%s\n", (tdev->first_minor < 0) ? | |
| "OFFLINE" : tape_state_verbose[tdev->tape_state]); | |
| } | |
| static | |
| DEVICE_ATTR(state, 0444, tape_state_show, NULL); | |
| static ssize_t | |
| tape_operation_show(struct device *dev, struct device_attribute *attr, char *buf) | |
| { | |
| struct tape_device *tdev; | |
| ssize_t rc; | |
| tdev = dev_get_drvdata(dev); | |
| if (tdev->first_minor < 0) | |
| return scnprintf(buf, PAGE_SIZE, "N/A\n"); | |
| spin_lock_irq(get_ccwdev_lock(tdev->cdev)); | |
| if (list_empty(&tdev->req_queue)) | |
| rc = scnprintf(buf, PAGE_SIZE, "---\n"); | |
| else { | |
| struct tape_request *req; | |
| req = list_entry(tdev->req_queue.next, struct tape_request, | |
| list); | |
| rc = scnprintf(buf,PAGE_SIZE, "%s\n", tape_op_verbose[req->op]); | |
| } | |
| spin_unlock_irq(get_ccwdev_lock(tdev->cdev)); | |
| return rc; | |
| } | |
| static | |
| DEVICE_ATTR(operation, 0444, tape_operation_show, NULL); | |
| static ssize_t | |
| tape_blocksize_show(struct device *dev, struct device_attribute *attr, char *buf) | |
| { | |
| struct tape_device *tdev; | |
| tdev = dev_get_drvdata(dev); | |
| return scnprintf(buf, PAGE_SIZE, "%i\n", tdev->char_data.block_size); | |
| } | |
| static | |
| DEVICE_ATTR(blocksize, 0444, tape_blocksize_show, NULL); | |
| static struct attribute *tape_attrs[] = { | |
| &dev_attr_medium_state.attr, | |
| &dev_attr_first_minor.attr, | |
| &dev_attr_state.attr, | |
| &dev_attr_operation.attr, | |
| &dev_attr_blocksize.attr, | |
| NULL | |
| }; | |
| static const struct attribute_group tape_attr_group = { | |
| .attrs = tape_attrs, | |
| }; | |
| /* | |
| * Tape state functions | |
| */ | |
| void | |
| tape_state_set(struct tape_device *device, enum tape_state newstate) | |
| { | |
| const char *str; | |
| if (device->tape_state == TS_NOT_OPER) { | |
| DBF_EVENT(3, "ts_set err: not oper\n"); | |
| return; | |
| } | |
| DBF_EVENT(4, "ts. dev: %x\n", device->first_minor); | |
| DBF_EVENT(4, "old ts:\t\n"); | |
| if (device->tape_state < TS_SIZE && device->tape_state >=0 ) | |
| str = tape_state_verbose[device->tape_state]; | |
| else | |
| str = "UNKNOWN TS"; | |
| DBF_EVENT(4, "%s\n", str); | |
| DBF_EVENT(4, "new ts:\t\n"); | |
| if (newstate < TS_SIZE && newstate >= 0) | |
| str = tape_state_verbose[newstate]; | |
| else | |
| str = "UNKNOWN TS"; | |
| DBF_EVENT(4, "%s\n", str); | |
| device->tape_state = newstate; | |
| wake_up(&device->state_change_wq); | |
| } | |
| struct tape_med_state_work_data { | |
| struct tape_device *device; | |
| enum tape_medium_state state; | |
| struct work_struct work; | |
| }; | |
| static void | |
| tape_med_state_work_handler(struct work_struct *work) | |
| { | |
| static char env_state_loaded[] = "MEDIUM_STATE=LOADED"; | |
| static char env_state_unloaded[] = "MEDIUM_STATE=UNLOADED"; | |
| struct tape_med_state_work_data *p = | |
| container_of(work, struct tape_med_state_work_data, work); | |
| struct tape_device *device = p->device; | |
| char *envp[] = { NULL, NULL }; | |
| switch (p->state) { | |
| case MS_UNLOADED: | |
| pr_info("%s: The tape cartridge has been successfully " | |
| "unloaded\n", dev_name(&device->cdev->dev)); | |
| envp[0] = env_state_unloaded; | |
| kobject_uevent_env(&device->cdev->dev.kobj, KOBJ_CHANGE, envp); | |
| break; | |
| case MS_LOADED: | |
| pr_info("%s: A tape cartridge has been mounted\n", | |
| dev_name(&device->cdev->dev)); | |
| envp[0] = env_state_loaded; | |
| kobject_uevent_env(&device->cdev->dev.kobj, KOBJ_CHANGE, envp); | |
| break; | |
| default: | |
| break; | |
| } | |
| tape_put_device(device); | |
| kfree(p); | |
| } | |
| static void | |
| tape_med_state_work(struct tape_device *device, enum tape_medium_state state) | |
| { | |
| struct tape_med_state_work_data *p; | |
| p = kzalloc(sizeof(*p), GFP_ATOMIC); | |
| if (p) { | |
| INIT_WORK(&p->work, tape_med_state_work_handler); | |
| p->device = tape_get_device(device); | |
| p->state = state; | |
| schedule_work(&p->work); | |
| } | |
| } | |
| void | |
| tape_med_state_set(struct tape_device *device, enum tape_medium_state newstate) | |
| { | |
| enum tape_medium_state oldstate; | |
| oldstate = device->medium_state; | |
| if (oldstate == newstate) | |
| return; | |
| device->medium_state = newstate; | |
| switch(newstate){ | |
| case MS_UNLOADED: | |
| device->tape_generic_status |= GMT_DR_OPEN(~0); | |
| if (oldstate == MS_LOADED) | |
| tape_med_state_work(device, MS_UNLOADED); | |
| break; | |
| case MS_LOADED: | |
| device->tape_generic_status &= ~GMT_DR_OPEN(~0); | |
| if (oldstate == MS_UNLOADED) | |
| tape_med_state_work(device, MS_LOADED); | |
| break; | |
| default: | |
| break; | |
| } | |
| wake_up(&device->state_change_wq); | |
| } | |
| /* | |
| * Stop running ccw. Has to be called with the device lock held. | |
| */ | |
| static int | |
| __tape_cancel_io(struct tape_device *device, struct tape_request *request) | |
| { | |
| int retries; | |
| int rc; | |
| /* Check if interrupt has already been processed */ | |
| if (request->callback == NULL) | |
| return 0; | |
| rc = 0; | |
| for (retries = 0; retries < 5; retries++) { | |
| rc = ccw_device_clear(device->cdev, (long) request); | |
| switch (rc) { | |
| case 0: | |
| request->status = TAPE_REQUEST_DONE; | |
| return 0; | |
| case -EBUSY: | |
| request->status = TAPE_REQUEST_CANCEL; | |
| schedule_delayed_work(&device->tape_dnr, 0); | |
| return 0; | |
| case -ENODEV: | |
| DBF_EXCEPTION(2, "device gone, retry\n"); | |
| break; | |
| case -EIO: | |
| DBF_EXCEPTION(2, "I/O error, retry\n"); | |
| break; | |
| default: | |
| BUG(); | |
| } | |
| } | |
| return rc; | |
| } | |
| /* | |
| * Add device into the sorted list, giving it the first | |
| * available minor number. | |
| */ | |
| static int | |
| tape_assign_minor(struct tape_device *device) | |
| { | |
| struct tape_device *tmp; | |
| int minor; | |
| minor = 0; | |
| write_lock(&tape_device_lock); | |
| list_for_each_entry(tmp, &tape_device_list, node) { | |
| if (minor < tmp->first_minor) | |
| break; | |
| minor += TAPE_MINORS_PER_DEV; | |
| } | |
| if (minor >= 256) { | |
| write_unlock(&tape_device_lock); | |
| return -ENODEV; | |
| } | |
| device->first_minor = minor; | |
| list_add_tail(&device->node, &tmp->node); | |
| write_unlock(&tape_device_lock); | |
| return 0; | |
| } | |
| /* remove device from the list */ | |
| static void | |
| tape_remove_minor(struct tape_device *device) | |
| { | |
| write_lock(&tape_device_lock); | |
| list_del_init(&device->node); | |
| device->first_minor = -1; | |
| write_unlock(&tape_device_lock); | |
| } | |
| /* | |
| * Set a device online. | |
| * | |
| * This function is called by the common I/O layer to move a device from the | |
| * detected but offline into the online state. | |
| * If we return an error (RC < 0) the device remains in the offline state. This | |
| * can happen if the device is assigned somewhere else, for example. | |
| */ | |
| int | |
| tape_generic_online(struct tape_device *device, | |
| struct tape_discipline *discipline) | |
| { | |
| int rc; | |
| DBF_LH(6, "tape_enable_device(%p, %p)\n", device, discipline); | |
| if (device->tape_state != TS_INIT) { | |
| DBF_LH(3, "Tapestate not INIT (%d)\n", device->tape_state); | |
| return -EINVAL; | |
| } | |
| init_timer(&device->lb_timeout); | |
| device->lb_timeout.function = tape_long_busy_timeout; | |
| /* Let the discipline have a go at the device. */ | |
| device->discipline = discipline; | |
| if (!try_module_get(discipline->owner)) { | |
| return -EINVAL; | |
| } | |
| rc = discipline->setup_device(device); | |
| if (rc) | |
| goto out; | |
| rc = tape_assign_minor(device); | |
| if (rc) | |
| goto out_discipline; | |
| rc = tapechar_setup_device(device); | |
| if (rc) | |
| goto out_minor; | |
| tape_state_set(device, TS_UNUSED); | |
| DBF_LH(3, "(%08x): Drive set online\n", device->cdev_id); | |
| return 0; | |
| out_minor: | |
| tape_remove_minor(device); | |
| out_discipline: | |
| device->discipline->cleanup_device(device); | |
| device->discipline = NULL; | |
| out: | |
| module_put(discipline->owner); | |
| return rc; | |
| } | |
| static void | |
| tape_cleanup_device(struct tape_device *device) | |
| { | |
| tapechar_cleanup_device(device); | |
| device->discipline->cleanup_device(device); | |
| module_put(device->discipline->owner); | |
| tape_remove_minor(device); | |
| tape_med_state_set(device, MS_UNKNOWN); | |
| } | |
| /* | |
| * Suspend device. | |
| * | |
| * Called by the common I/O layer if the drive should be suspended on user | |
| * request. We refuse to suspend if the device is loaded or in use for the | |
| * following reason: | |
| * While the Linux guest is suspended, it might be logged off which causes | |
| * devices to be detached. Tape devices are automatically rewound and unloaded | |
| * during DETACH processing (unless the tape device was attached with the | |
| * NOASSIGN or MULTIUSER option). After rewind/unload, there is no way to | |
| * resume the original state of the tape device, since we would need to | |
| * manually re-load the cartridge which was active at suspend time. | |
| */ | |
| int tape_generic_pm_suspend(struct ccw_device *cdev) | |
| { | |
| struct tape_device *device; | |
| device = dev_get_drvdata(&cdev->dev); | |
| if (!device) { | |
| return -ENODEV; | |
| } | |
| DBF_LH(3, "(%08x): tape_generic_pm_suspend(%p)\n", | |
| device->cdev_id, device); | |
| if (device->medium_state != MS_UNLOADED) { | |
| pr_err("A cartridge is loaded in tape device %s, " | |
| "refusing to suspend\n", dev_name(&cdev->dev)); | |
| return -EBUSY; | |
| } | |
| spin_lock_irq(get_ccwdev_lock(device->cdev)); | |
| switch (device->tape_state) { | |
| case TS_INIT: | |
| case TS_NOT_OPER: | |
| case TS_UNUSED: | |
| spin_unlock_irq(get_ccwdev_lock(device->cdev)); | |
| break; | |
| default: | |
| pr_err("Tape device %s is busy, refusing to " | |
| "suspend\n", dev_name(&cdev->dev)); | |
| spin_unlock_irq(get_ccwdev_lock(device->cdev)); | |
| return -EBUSY; | |
| } | |
| DBF_LH(3, "(%08x): Drive suspended.\n", device->cdev_id); | |
| return 0; | |
| } | |
| /* | |
| * Set device offline. | |
| * | |
| * Called by the common I/O layer if the drive should set offline on user | |
| * request. We may prevent this by returning an error. | |
| * Manual offline is only allowed while the drive is not in use. | |
| */ | |
| int | |
| tape_generic_offline(struct ccw_device *cdev) | |
| { | |
| struct tape_device *device; | |
| device = dev_get_drvdata(&cdev->dev); | |
| if (!device) { | |
| return -ENODEV; | |
| } | |
| DBF_LH(3, "(%08x): tape_generic_offline(%p)\n", | |
| device->cdev_id, device); | |
| spin_lock_irq(get_ccwdev_lock(device->cdev)); | |
| switch (device->tape_state) { | |
| case TS_INIT: | |
| case TS_NOT_OPER: | |
| spin_unlock_irq(get_ccwdev_lock(device->cdev)); | |
| break; | |
| case TS_UNUSED: | |
| tape_state_set(device, TS_INIT); | |
| spin_unlock_irq(get_ccwdev_lock(device->cdev)); | |
| tape_cleanup_device(device); | |
| break; | |
| default: | |
| DBF_EVENT(3, "(%08x): Set offline failed " | |
| "- drive in use.\n", | |
| device->cdev_id); | |
| spin_unlock_irq(get_ccwdev_lock(device->cdev)); | |
| return -EBUSY; | |
| } | |
| DBF_LH(3, "(%08x): Drive set offline.\n", device->cdev_id); | |
| return 0; | |
| } | |
| /* | |
| * Allocate memory for a new device structure. | |
| */ | |
| static struct tape_device * | |
| tape_alloc_device(void) | |
| { | |
| struct tape_device *device; | |
| device = kzalloc(sizeof(struct tape_device), GFP_KERNEL); | |
| if (device == NULL) { | |
| DBF_EXCEPTION(2, "ti:no mem\n"); | |
| return ERR_PTR(-ENOMEM); | |
| } | |
| device->modeset_byte = kmalloc(1, GFP_KERNEL | GFP_DMA); | |
| if (device->modeset_byte == NULL) { | |
| DBF_EXCEPTION(2, "ti:no mem\n"); | |
| kfree(device); | |
| return ERR_PTR(-ENOMEM); | |
| } | |
| mutex_init(&device->mutex); | |
| INIT_LIST_HEAD(&device->req_queue); | |
| INIT_LIST_HEAD(&device->node); | |
| init_waitqueue_head(&device->state_change_wq); | |
| init_waitqueue_head(&device->wait_queue); | |
| device->tape_state = TS_INIT; | |
| device->medium_state = MS_UNKNOWN; | |
| *device->modeset_byte = 0; | |
| device->first_minor = -1; | |
| atomic_set(&device->ref_count, 1); | |
| INIT_DELAYED_WORK(&device->tape_dnr, tape_delayed_next_request); | |
| return device; | |
| } | |
| /* | |
| * Get a reference to an existing device structure. This will automatically | |
| * increment the reference count. | |
| */ | |
| struct tape_device * | |
| tape_get_device(struct tape_device *device) | |
| { | |
| int count; | |
| count = atomic_inc_return(&device->ref_count); | |
| DBF_EVENT(4, "tape_get_device(%p) = %i\n", device, count); | |
| return device; | |
| } | |
| /* | |
| * Decrease the reference counter of a devices structure. If the | |
| * reference counter reaches zero free the device structure. | |
| * The function returns a NULL pointer to be used by the caller | |
| * for clearing reference pointers. | |
| */ | |
| void | |
| tape_put_device(struct tape_device *device) | |
| { | |
| int count; | |
| count = atomic_dec_return(&device->ref_count); | |
| DBF_EVENT(4, "tape_put_device(%p) -> %i\n", device, count); | |
| BUG_ON(count < 0); | |
| if (count == 0) { | |
| kfree(device->modeset_byte); | |
| kfree(device); | |
| } | |
| } | |
| /* | |
| * Find tape device by a device index. | |
| */ | |
| struct tape_device * | |
| tape_find_device(int devindex) | |
| { | |
| struct tape_device *device, *tmp; | |
| device = ERR_PTR(-ENODEV); | |
| read_lock(&tape_device_lock); | |
| list_for_each_entry(tmp, &tape_device_list, node) { | |
| if (tmp->first_minor / TAPE_MINORS_PER_DEV == devindex) { | |
| device = tape_get_device(tmp); | |
| break; | |
| } | |
| } | |
| read_unlock(&tape_device_lock); | |
| return device; | |
| } | |
| /* | |
| * Driverfs tape probe function. | |
| */ | |
| int | |
| tape_generic_probe(struct ccw_device *cdev) | |
| { | |
| struct tape_device *device; | |
| int ret; | |
| struct ccw_dev_id dev_id; | |
| device = tape_alloc_device(); | |
| if (IS_ERR(device)) | |
| return -ENODEV; | |
| ccw_device_set_options(cdev, CCWDEV_DO_PATHGROUP | | |
| CCWDEV_DO_MULTIPATH); | |
| ret = sysfs_create_group(&cdev->dev.kobj, &tape_attr_group); | |
| if (ret) { | |
| tape_put_device(device); | |
| return ret; | |
| } | |
| dev_set_drvdata(&cdev->dev, device); | |
| cdev->handler = __tape_do_irq; | |
| device->cdev = cdev; | |
| ccw_device_get_id(cdev, &dev_id); | |
| device->cdev_id = devid_to_int(&dev_id); | |
| return ret; | |
| } | |
| static void | |
| __tape_discard_requests(struct tape_device *device) | |
| { | |
| struct tape_request * request; | |
| struct list_head * l, *n; | |
| list_for_each_safe(l, n, &device->req_queue) { | |
| request = list_entry(l, struct tape_request, list); | |
| if (request->status == TAPE_REQUEST_IN_IO) | |
| request->status = TAPE_REQUEST_DONE; | |
| list_del(&request->list); | |
| /* Decrease ref_count for removed request. */ | |
| request->device = NULL; | |
| tape_put_device(device); | |
| request->rc = -EIO; | |
| if (request->callback != NULL) | |
| request->callback(request, request->callback_data); | |
| } | |
| } | |
| /* | |
| * Driverfs tape remove function. | |
| * | |
| * This function is called whenever the common I/O layer detects the device | |
| * gone. This can happen at any time and we cannot refuse. | |
| */ | |
| void | |
| tape_generic_remove(struct ccw_device *cdev) | |
| { | |
| struct tape_device * device; | |
| device = dev_get_drvdata(&cdev->dev); | |
| if (!device) { | |
| return; | |
| } | |
| DBF_LH(3, "(%08x): tape_generic_remove(%p)\n", device->cdev_id, cdev); | |
| spin_lock_irq(get_ccwdev_lock(device->cdev)); | |
| switch (device->tape_state) { | |
| case TS_INIT: | |
| tape_state_set(device, TS_NOT_OPER); | |
| case TS_NOT_OPER: | |
| /* | |
| * Nothing to do. | |
| */ | |
| spin_unlock_irq(get_ccwdev_lock(device->cdev)); | |
| break; | |
| case TS_UNUSED: | |
| /* | |
| * Need only to release the device. | |
| */ | |
| tape_state_set(device, TS_NOT_OPER); | |
| spin_unlock_irq(get_ccwdev_lock(device->cdev)); | |
| tape_cleanup_device(device); | |
| break; | |
| default: | |
| /* | |
| * There may be requests on the queue. We will not get | |
| * an interrupt for a request that was running. So we | |
| * just post them all as I/O errors. | |
| */ | |
| DBF_EVENT(3, "(%08x): Drive in use vanished!\n", | |
| device->cdev_id); | |
| pr_warn("%s: A tape unit was detached while in use\n", | |
| dev_name(&device->cdev->dev)); | |
| tape_state_set(device, TS_NOT_OPER); | |
| __tape_discard_requests(device); | |
| spin_unlock_irq(get_ccwdev_lock(device->cdev)); | |
| tape_cleanup_device(device); | |
| } | |
| device = dev_get_drvdata(&cdev->dev); | |
| if (device) { | |
| sysfs_remove_group(&cdev->dev.kobj, &tape_attr_group); | |
| dev_set_drvdata(&cdev->dev, NULL); | |
| tape_put_device(device); | |
| } | |
| } | |
| /* | |
| * Allocate a new tape ccw request | |
| */ | |
| struct tape_request * | |
| tape_alloc_request(int cplength, int datasize) | |
| { | |
| struct tape_request *request; | |
| BUG_ON(datasize > PAGE_SIZE || (cplength*sizeof(struct ccw1)) > PAGE_SIZE); | |
| DBF_LH(6, "tape_alloc_request(%d, %d)\n", cplength, datasize); | |
| request = kzalloc(sizeof(struct tape_request), GFP_KERNEL); | |
| if (request == NULL) { | |
| DBF_EXCEPTION(1, "cqra nomem\n"); | |
| return ERR_PTR(-ENOMEM); | |
| } | |
| /* allocate channel program */ | |
| if (cplength > 0) { | |
| request->cpaddr = kcalloc(cplength, sizeof(struct ccw1), | |
| GFP_ATOMIC | GFP_DMA); | |
| if (request->cpaddr == NULL) { | |
| DBF_EXCEPTION(1, "cqra nomem\n"); | |
| kfree(request); | |
| return ERR_PTR(-ENOMEM); | |
| } | |
| } | |
| /* alloc small kernel buffer */ | |
| if (datasize > 0) { | |
| request->cpdata = kzalloc(datasize, GFP_KERNEL | GFP_DMA); | |
| if (request->cpdata == NULL) { | |
| DBF_EXCEPTION(1, "cqra nomem\n"); | |
| kfree(request->cpaddr); | |
| kfree(request); | |
| return ERR_PTR(-ENOMEM); | |
| } | |
| } | |
| DBF_LH(6, "New request %p(%p/%p)\n", request, request->cpaddr, | |
| request->cpdata); | |
| return request; | |
| } | |
| /* | |
| * Free tape ccw request | |
| */ | |
| void | |
| tape_free_request (struct tape_request * request) | |
| { | |
| DBF_LH(6, "Free request %p\n", request); | |
| if (request->device) | |
| tape_put_device(request->device); | |
| kfree(request->cpdata); | |
| kfree(request->cpaddr); | |
| kfree(request); | |
| } | |
| static int | |
| __tape_start_io(struct tape_device *device, struct tape_request *request) | |
| { | |
| int rc; | |
| rc = ccw_device_start( | |
| device->cdev, | |
| request->cpaddr, | |
| (unsigned long) request, | |
| 0x00, | |
| request->options | |
| ); | |
| if (rc == 0) { | |
| request->status = TAPE_REQUEST_IN_IO; | |
| } else if (rc == -EBUSY) { | |
| /* The common I/O subsystem is currently busy. Retry later. */ | |
| request->status = TAPE_REQUEST_QUEUED; | |
| schedule_delayed_work(&device->tape_dnr, 0); | |
| rc = 0; | |
| } else { | |
| /* Start failed. Remove request and indicate failure. */ | |
| DBF_EVENT(1, "tape: start request failed with RC = %i\n", rc); | |
| } | |
| return rc; | |
| } | |
| static void | |
| __tape_start_next_request(struct tape_device *device) | |
| { | |
| struct list_head *l, *n; | |
| struct tape_request *request; | |
| int rc; | |
| DBF_LH(6, "__tape_start_next_request(%p)\n", device); | |
| /* | |
| * Try to start each request on request queue until one is | |
| * started successful. | |
| */ | |
| list_for_each_safe(l, n, &device->req_queue) { | |
| request = list_entry(l, struct tape_request, list); | |
| /* | |
| * Avoid race condition if bottom-half was triggered more than | |
| * once. | |
| */ | |
| if (request->status == TAPE_REQUEST_IN_IO) | |
| return; | |
| /* | |
| * Request has already been stopped. We have to wait until | |
| * the request is removed from the queue in the interrupt | |
| * handling. | |
| */ | |
| if (request->status == TAPE_REQUEST_DONE) | |
| return; | |
| /* | |
| * We wanted to cancel the request but the common I/O layer | |
| * was busy at that time. This can only happen if this | |
| * function is called by delayed_next_request. | |
| * Otherwise we start the next request on the queue. | |
| */ | |
| if (request->status == TAPE_REQUEST_CANCEL) { | |
| rc = __tape_cancel_io(device, request); | |
| } else { | |
| rc = __tape_start_io(device, request); | |
| } | |
| if (rc == 0) | |
| return; | |
| /* Set ending status. */ | |
| request->rc = rc; | |
| request->status = TAPE_REQUEST_DONE; | |
| /* Remove from request queue. */ | |
| list_del(&request->list); | |
| /* Do callback. */ | |
| if (request->callback != NULL) | |
| request->callback(request, request->callback_data); | |
| } | |
| } | |
| static void | |
| tape_delayed_next_request(struct work_struct *work) | |
| { | |
| struct tape_device *device = | |
| container_of(work, struct tape_device, tape_dnr.work); | |
| DBF_LH(6, "tape_delayed_next_request(%p)\n", device); | |
| spin_lock_irq(get_ccwdev_lock(device->cdev)); | |
| __tape_start_next_request(device); | |
| spin_unlock_irq(get_ccwdev_lock(device->cdev)); | |
| } | |
| static void tape_long_busy_timeout(unsigned long data) | |
| { | |
| struct tape_request *request; | |
| struct tape_device *device; | |
| device = (struct tape_device *) data; | |
| spin_lock_irq(get_ccwdev_lock(device->cdev)); | |
| request = list_entry(device->req_queue.next, struct tape_request, list); | |
| BUG_ON(request->status != TAPE_REQUEST_LONG_BUSY); | |
| DBF_LH(6, "%08x: Long busy timeout.\n", device->cdev_id); | |
| __tape_start_next_request(device); | |
| device->lb_timeout.data = 0UL; | |
| tape_put_device(device); | |
| spin_unlock_irq(get_ccwdev_lock(device->cdev)); | |
| } | |
| static void | |
| __tape_end_request( | |
| struct tape_device * device, | |
| struct tape_request * request, | |
| int rc) | |
| { | |
| DBF_LH(6, "__tape_end_request(%p, %p, %i)\n", device, request, rc); | |
| if (request) { | |
| request->rc = rc; | |
| request->status = TAPE_REQUEST_DONE; | |
| /* Remove from request queue. */ | |
| list_del(&request->list); | |
| /* Do callback. */ | |
| if (request->callback != NULL) | |
| request->callback(request, request->callback_data); | |
| } | |
| /* Start next request. */ | |
| if (!list_empty(&device->req_queue)) | |
| __tape_start_next_request(device); | |
| } | |
| /* | |
| * Write sense data to dbf | |
| */ | |
| void | |
| tape_dump_sense_dbf(struct tape_device *device, struct tape_request *request, | |
| struct irb *irb) | |
| { | |
| unsigned int *sptr; | |
| const char* op; | |
| if (request != NULL) | |
| op = tape_op_verbose[request->op]; | |
| else | |
| op = "---"; | |
| DBF_EVENT(3, "DSTAT : %02x CSTAT: %02x\n", | |
| irb->scsw.cmd.dstat, irb->scsw.cmd.cstat); | |
| DBF_EVENT(3, "DEVICE: %08x OP\t: %s\n", device->cdev_id, op); | |
| sptr = (unsigned int *) irb->ecw; | |
| DBF_EVENT(3, "%08x %08x\n", sptr[0], sptr[1]); | |
| DBF_EVENT(3, "%08x %08x\n", sptr[2], sptr[3]); | |
| DBF_EVENT(3, "%08x %08x\n", sptr[4], sptr[5]); | |
| DBF_EVENT(3, "%08x %08x\n", sptr[6], sptr[7]); | |
| } | |
| /* | |
| * I/O helper function. Adds the request to the request queue | |
| * and starts it if the tape is idle. Has to be called with | |
| * the device lock held. | |
| */ | |
| static int | |
| __tape_start_request(struct tape_device *device, struct tape_request *request) | |
| { | |
| int rc; | |
| switch (request->op) { | |
| case TO_MSEN: | |
| case TO_ASSIGN: | |
| case TO_UNASSIGN: | |
| case TO_READ_ATTMSG: | |
| case TO_RDC: | |
| if (device->tape_state == TS_INIT) | |
| break; | |
| if (device->tape_state == TS_UNUSED) | |
| break; | |
| default: | |
| if (device->tape_state == TS_BLKUSE) | |
| break; | |
| if (device->tape_state != TS_IN_USE) | |
| return -ENODEV; | |
| } | |
| /* Increase use count of device for the added request. */ | |
| request->device = tape_get_device(device); | |
| if (list_empty(&device->req_queue)) { | |
| /* No other requests are on the queue. Start this one. */ | |
| rc = __tape_start_io(device, request); | |
| if (rc) | |
| return rc; | |
| DBF_LH(5, "Request %p added for execution.\n", request); | |
| list_add(&request->list, &device->req_queue); | |
| } else { | |
| DBF_LH(5, "Request %p add to queue.\n", request); | |
| request->status = TAPE_REQUEST_QUEUED; | |
| list_add_tail(&request->list, &device->req_queue); | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Add the request to the request queue, try to start it if the | |
| * tape is idle. Return without waiting for end of i/o. | |
| */ | |
| int | |
| tape_do_io_async(struct tape_device *device, struct tape_request *request) | |
| { | |
| int rc; | |
| DBF_LH(6, "tape_do_io_async(%p, %p)\n", device, request); | |
| spin_lock_irq(get_ccwdev_lock(device->cdev)); | |
| /* Add request to request queue and try to start it. */ | |
| rc = __tape_start_request(device, request); | |
| spin_unlock_irq(get_ccwdev_lock(device->cdev)); | |
| return rc; | |
| } | |
| /* | |
| * tape_do_io/__tape_wake_up | |
| * Add the request to the request queue, try to start it if the | |
| * tape is idle and wait uninterruptible for its completion. | |
| */ | |
| static void | |
| __tape_wake_up(struct tape_request *request, void *data) | |
| { | |
| request->callback = NULL; | |
| wake_up((wait_queue_head_t *) data); | |
| } | |
| int | |
| tape_do_io(struct tape_device *device, struct tape_request *request) | |
| { | |
| int rc; | |
| spin_lock_irq(get_ccwdev_lock(device->cdev)); | |
| /* Setup callback */ | |
| request->callback = __tape_wake_up; | |
| request->callback_data = &device->wait_queue; | |
| /* Add request to request queue and try to start it. */ | |
| rc = __tape_start_request(device, request); | |
| spin_unlock_irq(get_ccwdev_lock(device->cdev)); | |
| if (rc) | |
| return rc; | |
| /* Request added to the queue. Wait for its completion. */ | |
| wait_event(device->wait_queue, (request->callback == NULL)); | |
| /* Get rc from request */ | |
| return request->rc; | |
| } | |
| /* | |
| * tape_do_io_interruptible/__tape_wake_up_interruptible | |
| * Add the request to the request queue, try to start it if the | |
| * tape is idle and wait uninterruptible for its completion. | |
| */ | |
| static void | |
| __tape_wake_up_interruptible(struct tape_request *request, void *data) | |
| { | |
| request->callback = NULL; | |
| wake_up_interruptible((wait_queue_head_t *) data); | |
| } | |
| int | |
| tape_do_io_interruptible(struct tape_device *device, | |
| struct tape_request *request) | |
| { | |
| int rc; | |
| spin_lock_irq(get_ccwdev_lock(device->cdev)); | |
| /* Setup callback */ | |
| request->callback = __tape_wake_up_interruptible; | |
| request->callback_data = &device->wait_queue; | |
| rc = __tape_start_request(device, request); | |
| spin_unlock_irq(get_ccwdev_lock(device->cdev)); | |
| if (rc) | |
| return rc; | |
| /* Request added to the queue. Wait for its completion. */ | |
| rc = wait_event_interruptible(device->wait_queue, | |
| (request->callback == NULL)); | |
| if (rc != -ERESTARTSYS) | |
| /* Request finished normally. */ | |
| return request->rc; | |
| /* Interrupted by a signal. We have to stop the current request. */ | |
| spin_lock_irq(get_ccwdev_lock(device->cdev)); | |
| rc = __tape_cancel_io(device, request); | |
| spin_unlock_irq(get_ccwdev_lock(device->cdev)); | |
| if (rc == 0) { | |
| /* Wait for the interrupt that acknowledges the halt. */ | |
| do { | |
| rc = wait_event_interruptible( | |
| device->wait_queue, | |
| (request->callback == NULL) | |
| ); | |
| } while (rc == -ERESTARTSYS); | |
| DBF_EVENT(3, "IO stopped on %08x\n", device->cdev_id); | |
| rc = -ERESTARTSYS; | |
| } | |
| return rc; | |
| } | |
| /* | |
| * Stop running ccw. | |
| */ | |
| int | |
| tape_cancel_io(struct tape_device *device, struct tape_request *request) | |
| { | |
| int rc; | |
| spin_lock_irq(get_ccwdev_lock(device->cdev)); | |
| rc = __tape_cancel_io(device, request); | |
| spin_unlock_irq(get_ccwdev_lock(device->cdev)); | |
| return rc; | |
| } | |
| /* | |
| * Tape interrupt routine, called from the ccw_device layer | |
| */ | |
| static void | |
| __tape_do_irq (struct ccw_device *cdev, unsigned long intparm, struct irb *irb) | |
| { | |
| struct tape_device *device; | |
| struct tape_request *request; | |
| int rc; | |
| device = dev_get_drvdata(&cdev->dev); | |
| if (device == NULL) { | |
| return; | |
| } | |
| request = (struct tape_request *) intparm; | |
| DBF_LH(6, "__tape_do_irq(device=%p, request=%p)\n", device, request); | |
| /* On special conditions irb is an error pointer */ | |
| if (IS_ERR(irb)) { | |
| /* FIXME: What to do with the request? */ | |
| switch (PTR_ERR(irb)) { | |
| case -ETIMEDOUT: | |
| DBF_LH(1, "(%08x): Request timed out\n", | |
| device->cdev_id); | |
| case -EIO: | |
| __tape_end_request(device, request, -EIO); | |
| break; | |
| default: | |
| DBF_LH(1, "(%08x): Unexpected i/o error %li\n", | |
| device->cdev_id, PTR_ERR(irb)); | |
| } | |
| return; | |
| } | |
| /* | |
| * If the condition code is not zero and the start function bit is | |
| * still set, this is an deferred error and the last start I/O did | |
| * not succeed. At this point the condition that caused the deferred | |
| * error might still apply. So we just schedule the request to be | |
| * started later. | |
| */ | |
| if (irb->scsw.cmd.cc != 0 && | |
| (irb->scsw.cmd.fctl & SCSW_FCTL_START_FUNC) && | |
| (request->status == TAPE_REQUEST_IN_IO)) { | |
| DBF_EVENT(3,"(%08x): deferred cc=%i, fctl=%i. restarting\n", | |
| device->cdev_id, irb->scsw.cmd.cc, irb->scsw.cmd.fctl); | |
| request->status = TAPE_REQUEST_QUEUED; | |
| schedule_delayed_work(&device->tape_dnr, HZ); | |
| return; | |
| } | |
| /* May be an unsolicited irq */ | |
| if(request != NULL) | |
| request->rescnt = irb->scsw.cmd.count; | |
| else if ((irb->scsw.cmd.dstat == 0x85 || irb->scsw.cmd.dstat == 0x80) && | |
| !list_empty(&device->req_queue)) { | |
| /* Not Ready to Ready after long busy ? */ | |
| struct tape_request *req; | |
| req = list_entry(device->req_queue.next, | |
| struct tape_request, list); | |
| if (req->status == TAPE_REQUEST_LONG_BUSY) { | |
| DBF_EVENT(3, "(%08x): del timer\n", device->cdev_id); | |
| if (del_timer(&device->lb_timeout)) { | |
| device->lb_timeout.data = 0UL; | |
| tape_put_device(device); | |
| __tape_start_next_request(device); | |
| } | |
| return; | |
| } | |
| } | |
| if (irb->scsw.cmd.dstat != 0x0c) { | |
| /* Set the 'ONLINE' flag depending on sense byte 1 */ | |
| if(*(((__u8 *) irb->ecw) + 1) & SENSE_DRIVE_ONLINE) | |
| device->tape_generic_status |= GMT_ONLINE(~0); | |
| else | |
| device->tape_generic_status &= ~GMT_ONLINE(~0); | |
| /* | |
| * Any request that does not come back with channel end | |
| * and device end is unusual. Log the sense data. | |
| */ | |
| DBF_EVENT(3,"-- Tape Interrupthandler --\n"); | |
| tape_dump_sense_dbf(device, request, irb); | |
| } else { | |
| /* Upon normal completion the device _is_ online */ | |
| device->tape_generic_status |= GMT_ONLINE(~0); | |
| } | |
| if (device->tape_state == TS_NOT_OPER) { | |
| DBF_EVENT(6, "tape:device is not operational\n"); | |
| return; | |
| } | |
| /* | |
| * Request that were canceled still come back with an interrupt. | |
| * To detect these request the state will be set to TAPE_REQUEST_DONE. | |
| */ | |
| if(request != NULL && request->status == TAPE_REQUEST_DONE) { | |
| __tape_end_request(device, request, -EIO); | |
| return; | |
| } | |
| rc = device->discipline->irq(device, request, irb); | |
| /* | |
| * rc < 0 : request finished unsuccessfully. | |
| * rc == TAPE_IO_SUCCESS: request finished successfully. | |
| * rc == TAPE_IO_PENDING: request is still running. Ignore rc. | |
| * rc == TAPE_IO_RETRY: request finished but needs another go. | |
| * rc == TAPE_IO_STOP: request needs to get terminated. | |
| */ | |
| switch (rc) { | |
| case TAPE_IO_SUCCESS: | |
| /* Upon normal completion the device _is_ online */ | |
| device->tape_generic_status |= GMT_ONLINE(~0); | |
| __tape_end_request(device, request, rc); | |
| break; | |
| case TAPE_IO_PENDING: | |
| break; | |
| case TAPE_IO_LONG_BUSY: | |
| device->lb_timeout.data = | |
| (unsigned long) tape_get_device(device); | |
| device->lb_timeout.expires = jiffies + | |
| LONG_BUSY_TIMEOUT * HZ; | |
| DBF_EVENT(3, "(%08x): add timer\n", device->cdev_id); | |
| add_timer(&device->lb_timeout); | |
| request->status = TAPE_REQUEST_LONG_BUSY; | |
| break; | |
| case TAPE_IO_RETRY: | |
| rc = __tape_start_io(device, request); | |
| if (rc) | |
| __tape_end_request(device, request, rc); | |
| break; | |
| case TAPE_IO_STOP: | |
| rc = __tape_cancel_io(device, request); | |
| if (rc) | |
| __tape_end_request(device, request, rc); | |
| break; | |
| default: | |
| if (rc > 0) { | |
| DBF_EVENT(6, "xunknownrc\n"); | |
| __tape_end_request(device, request, -EIO); | |
| } else { | |
| __tape_end_request(device, request, rc); | |
| } | |
| break; | |
| } | |
| } | |
| /* | |
| * Tape device open function used by tape_char frontend. | |
| */ | |
| int | |
| tape_open(struct tape_device *device) | |
| { | |
| int rc; | |
| spin_lock_irq(get_ccwdev_lock(device->cdev)); | |
| if (device->tape_state == TS_NOT_OPER) { | |
| DBF_EVENT(6, "TAPE:nodev\n"); | |
| rc = -ENODEV; | |
| } else if (device->tape_state == TS_IN_USE) { | |
| DBF_EVENT(6, "TAPE:dbusy\n"); | |
| rc = -EBUSY; | |
| } else if (device->tape_state == TS_BLKUSE) { | |
| DBF_EVENT(6, "TAPE:dbusy\n"); | |
| rc = -EBUSY; | |
| } else if (device->discipline != NULL && | |
| !try_module_get(device->discipline->owner)) { | |
| DBF_EVENT(6, "TAPE:nodisc\n"); | |
| rc = -ENODEV; | |
| } else { | |
| tape_state_set(device, TS_IN_USE); | |
| rc = 0; | |
| } | |
| spin_unlock_irq(get_ccwdev_lock(device->cdev)); | |
| return rc; | |
| } | |
| /* | |
| * Tape device release function used by tape_char frontend. | |
| */ | |
| int | |
| tape_release(struct tape_device *device) | |
| { | |
| spin_lock_irq(get_ccwdev_lock(device->cdev)); | |
| if (device->tape_state == TS_IN_USE) | |
| tape_state_set(device, TS_UNUSED); | |
| module_put(device->discipline->owner); | |
| spin_unlock_irq(get_ccwdev_lock(device->cdev)); | |
| return 0; | |
| } | |
| /* | |
| * Execute a magnetic tape command a number of times. | |
| */ | |
| int | |
| tape_mtop(struct tape_device *device, int mt_op, int mt_count) | |
| { | |
| tape_mtop_fn fn; | |
| int rc; | |
| DBF_EVENT(6, "TAPE:mtio\n"); | |
| DBF_EVENT(6, "TAPE:ioop: %x\n", mt_op); | |
| DBF_EVENT(6, "TAPE:arg: %x\n", mt_count); | |
| if (mt_op < 0 || mt_op >= TAPE_NR_MTOPS) | |
| return -EINVAL; | |
| fn = device->discipline->mtop_array[mt_op]; | |
| if (fn == NULL) | |
| return -EINVAL; | |
| /* We assume that the backends can handle count up to 500. */ | |
| if (mt_op == MTBSR || mt_op == MTFSR || mt_op == MTFSF || | |
| mt_op == MTBSF || mt_op == MTFSFM || mt_op == MTBSFM) { | |
| rc = 0; | |
| for (; mt_count > 500; mt_count -= 500) | |
| if ((rc = fn(device, 500)) != 0) | |
| break; | |
| if (rc == 0) | |
| rc = fn(device, mt_count); | |
| } else | |
| rc = fn(device, mt_count); | |
| return rc; | |
| } | |
| /* | |
| * Tape init function. | |
| */ | |
| static int | |
| tape_init (void) | |
| { | |
| TAPE_DBF_AREA = debug_register ( "tape", 2, 2, 4*sizeof(long)); | |
| debug_register_view(TAPE_DBF_AREA, &debug_sprintf_view); | |
| #ifdef DBF_LIKE_HELL | |
| debug_set_level(TAPE_DBF_AREA, 6); | |
| #endif | |
| DBF_EVENT(3, "tape init\n"); | |
| tape_proc_init(); | |
| tapechar_init (); | |
| return 0; | |
| } | |
| /* | |
| * Tape exit function. | |
| */ | |
| static void | |
| tape_exit(void) | |
| { | |
| DBF_EVENT(6, "tape exit\n"); | |
| /* Get rid of the frontends */ | |
| tapechar_exit(); | |
| tape_proc_cleanup(); | |
| debug_unregister (TAPE_DBF_AREA); | |
| } | |
| MODULE_AUTHOR("(C) 2001 IBM Deutschland Entwicklung GmbH by Carsten Otte and " | |
| "Michael Holzheu (cotte@de.ibm.com,holzheu@de.ibm.com)"); | |
| MODULE_DESCRIPTION("Linux on zSeries channel attached tape device driver"); | |
| MODULE_LICENSE("GPL"); | |
| module_init(tape_init); | |
| module_exit(tape_exit); | |
| EXPORT_SYMBOL(tape_generic_remove); | |
| EXPORT_SYMBOL(tape_generic_probe); | |
| EXPORT_SYMBOL(tape_generic_online); | |
| EXPORT_SYMBOL(tape_generic_offline); | |
| EXPORT_SYMBOL(tape_generic_pm_suspend); | |
| EXPORT_SYMBOL(tape_put_device); | |
| EXPORT_SYMBOL(tape_get_device); | |
| EXPORT_SYMBOL(tape_state_verbose); | |
| EXPORT_SYMBOL(tape_op_verbose); | |
| EXPORT_SYMBOL(tape_state_set); | |
| EXPORT_SYMBOL(tape_med_state_set); | |
| EXPORT_SYMBOL(tape_alloc_request); | |
| EXPORT_SYMBOL(tape_free_request); | |
| EXPORT_SYMBOL(tape_dump_sense_dbf); | |
| EXPORT_SYMBOL(tape_do_io); | |
| EXPORT_SYMBOL(tape_do_io_async); | |
| EXPORT_SYMBOL(tape_do_io_interruptible); | |
| EXPORT_SYMBOL(tape_cancel_io); | |
| EXPORT_SYMBOL(tape_mtop); |