| /* | |
| * Serial Attached SCSI (SAS) Expander discovery and configuration | |
| * | |
| * Copyright (C) 2007 James E.J. Bottomley | |
| * <James.Bottomley@HansenPartnership.com> | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation; version 2 only. | |
| */ | |
| #include <linux/scatterlist.h> | |
| #include <linux/blkdev.h> | |
| #include <linux/slab.h> | |
| #include <linux/export.h> | |
| #include "sas_internal.h" | |
| #include <scsi/scsi_transport.h> | |
| #include <scsi/scsi_transport_sas.h> | |
| #include "../scsi_sas_internal.h" | |
| static void sas_host_smp_discover(struct sas_ha_struct *sas_ha, u8 *resp_data, | |
| u8 phy_id) | |
| { | |
| struct sas_phy *phy; | |
| struct sas_rphy *rphy; | |
| if (phy_id >= sas_ha->num_phys) { | |
| resp_data[2] = SMP_RESP_NO_PHY; | |
| return; | |
| } | |
| resp_data[2] = SMP_RESP_FUNC_ACC; | |
| phy = sas_ha->sas_phy[phy_id]->phy; | |
| resp_data[9] = phy_id; | |
| resp_data[13] = phy->negotiated_linkrate; | |
| memcpy(resp_data + 16, sas_ha->sas_addr, SAS_ADDR_SIZE); | |
| memcpy(resp_data + 24, sas_ha->sas_phy[phy_id]->attached_sas_addr, | |
| SAS_ADDR_SIZE); | |
| resp_data[40] = (phy->minimum_linkrate << 4) | | |
| phy->minimum_linkrate_hw; | |
| resp_data[41] = (phy->maximum_linkrate << 4) | | |
| phy->maximum_linkrate_hw; | |
| if (!sas_ha->sas_phy[phy_id]->port || | |
| !sas_ha->sas_phy[phy_id]->port->port_dev) | |
| return; | |
| rphy = sas_ha->sas_phy[phy_id]->port->port_dev->rphy; | |
| resp_data[12] = rphy->identify.device_type << 4; | |
| resp_data[14] = rphy->identify.initiator_port_protocols; | |
| resp_data[15] = rphy->identify.target_port_protocols; | |
| } | |
| /** | |
| * to_sas_gpio_gp_bit - given the gpio frame data find the byte/bit position of 'od' | |
| * @od: od bit to find | |
| * @data: incoming bitstream (from frame) | |
| * @index: requested data register index (from frame) | |
| * @count: total number of registers in the bitstream (from frame) | |
| * @bit: bit position of 'od' in the returned byte | |
| * | |
| * returns NULL if 'od' is not in 'data' | |
| * | |
| * From SFF-8485 v0.7: | |
| * "In GPIO_TX[1], bit 0 of byte 3 contains the first bit (i.e., OD0.0) | |
| * and bit 7 of byte 0 contains the 32nd bit (i.e., OD10.1). | |
| * | |
| * In GPIO_TX[2], bit 0 of byte 3 contains the 33rd bit (i.e., OD10.2) | |
| * and bit 7 of byte 0 contains the 64th bit (i.e., OD21.0)." | |
| * | |
| * The general-purpose (raw-bitstream) RX registers have the same layout | |
| * although 'od' is renamed 'id' for 'input data'. | |
| * | |
| * SFF-8489 defines the behavior of the LEDs in response to the 'od' values. | |
| */ | |
| static u8 *to_sas_gpio_gp_bit(unsigned int od, u8 *data, u8 index, u8 count, u8 *bit) | |
| { | |
| unsigned int reg; | |
| u8 byte; | |
| /* gp registers start at index 1 */ | |
| if (index == 0) | |
| return NULL; | |
| index--; /* make index 0-based */ | |
| if (od < index * 32) | |
| return NULL; | |
| od -= index * 32; | |
| reg = od >> 5; | |
| if (reg >= count) | |
| return NULL; | |
| od &= (1 << 5) - 1; | |
| byte = 3 - (od >> 3); | |
| *bit = od & ((1 << 3) - 1); | |
| return &data[reg * 4 + byte]; | |
| } | |
| int try_test_sas_gpio_gp_bit(unsigned int od, u8 *data, u8 index, u8 count) | |
| { | |
| u8 *byte; | |
| u8 bit; | |
| byte = to_sas_gpio_gp_bit(od, data, index, count, &bit); | |
| if (!byte) | |
| return -1; | |
| return (*byte >> bit) & 1; | |
| } | |
| EXPORT_SYMBOL(try_test_sas_gpio_gp_bit); | |
| static int sas_host_smp_write_gpio(struct sas_ha_struct *sas_ha, u8 *resp_data, | |
| u8 reg_type, u8 reg_index, u8 reg_count, | |
| u8 *req_data) | |
| { | |
| struct sas_internal *i = to_sas_internal(sas_ha->core.shost->transportt); | |
| int written; | |
| if (i->dft->lldd_write_gpio == NULL) { | |
| resp_data[2] = SMP_RESP_FUNC_UNK; | |
| return 0; | |
| } | |
| written = i->dft->lldd_write_gpio(sas_ha, reg_type, reg_index, | |
| reg_count, req_data); | |
| if (written < 0) { | |
| resp_data[2] = SMP_RESP_FUNC_FAILED; | |
| written = 0; | |
| } else | |
| resp_data[2] = SMP_RESP_FUNC_ACC; | |
| return written; | |
| } | |
| static void sas_report_phy_sata(struct sas_ha_struct *sas_ha, u8 *resp_data, | |
| u8 phy_id) | |
| { | |
| struct sas_rphy *rphy; | |
| struct dev_to_host_fis *fis; | |
| int i; | |
| if (phy_id >= sas_ha->num_phys) { | |
| resp_data[2] = SMP_RESP_NO_PHY; | |
| return; | |
| } | |
| resp_data[2] = SMP_RESP_PHY_NO_SATA; | |
| if (!sas_ha->sas_phy[phy_id]->port) | |
| return; | |
| rphy = sas_ha->sas_phy[phy_id]->port->port_dev->rphy; | |
| fis = (struct dev_to_host_fis *) | |
| sas_ha->sas_phy[phy_id]->port->port_dev->frame_rcvd; | |
| if (rphy->identify.target_port_protocols != SAS_PROTOCOL_SATA) | |
| return; | |
| resp_data[2] = SMP_RESP_FUNC_ACC; | |
| resp_data[9] = phy_id; | |
| memcpy(resp_data + 16, sas_ha->sas_phy[phy_id]->attached_sas_addr, | |
| SAS_ADDR_SIZE); | |
| /* check to see if we have a valid d2h fis */ | |
| if (fis->fis_type != 0x34) | |
| return; | |
| /* the d2h fis is required by the standard to be in LE format */ | |
| for (i = 0; i < 20; i += 4) { | |
| u8 *dst = resp_data + 24 + i, *src = | |
| &sas_ha->sas_phy[phy_id]->port->port_dev->frame_rcvd[i]; | |
| dst[0] = src[3]; | |
| dst[1] = src[2]; | |
| dst[2] = src[1]; | |
| dst[3] = src[0]; | |
| } | |
| } | |
| static void sas_phy_control(struct sas_ha_struct *sas_ha, u8 phy_id, | |
| u8 phy_op, enum sas_linkrate min, | |
| enum sas_linkrate max, u8 *resp_data) | |
| { | |
| struct sas_internal *i = | |
| to_sas_internal(sas_ha->core.shost->transportt); | |
| struct sas_phy_linkrates rates; | |
| struct asd_sas_phy *asd_phy; | |
| if (phy_id >= sas_ha->num_phys) { | |
| resp_data[2] = SMP_RESP_NO_PHY; | |
| return; | |
| } | |
| asd_phy = sas_ha->sas_phy[phy_id]; | |
| switch (phy_op) { | |
| case PHY_FUNC_NOP: | |
| case PHY_FUNC_LINK_RESET: | |
| case PHY_FUNC_HARD_RESET: | |
| case PHY_FUNC_DISABLE: | |
| case PHY_FUNC_CLEAR_ERROR_LOG: | |
| case PHY_FUNC_CLEAR_AFFIL: | |
| case PHY_FUNC_TX_SATA_PS_SIGNAL: | |
| break; | |
| default: | |
| resp_data[2] = SMP_RESP_PHY_UNK_OP; | |
| return; | |
| } | |
| rates.minimum_linkrate = min; | |
| rates.maximum_linkrate = max; | |
| /* filter reset requests through libata eh */ | |
| if (phy_op == PHY_FUNC_LINK_RESET && sas_try_ata_reset(asd_phy) == 0) { | |
| resp_data[2] = SMP_RESP_FUNC_ACC; | |
| return; | |
| } | |
| if (i->dft->lldd_control_phy(asd_phy, phy_op, &rates)) | |
| resp_data[2] = SMP_RESP_FUNC_FAILED; | |
| else | |
| resp_data[2] = SMP_RESP_FUNC_ACC; | |
| } | |
| void sas_smp_host_handler(struct bsg_job *job, struct Scsi_Host *shost) | |
| { | |
| struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost); | |
| u8 *req_data, *resp_data; | |
| unsigned int reslen = 0; | |
| int error = -EINVAL; | |
| /* eight is the minimum size for request and response frames */ | |
| if (job->request_payload.payload_len < 8 || | |
| job->reply_payload.payload_len < 8) | |
| goto out; | |
| error = -ENOMEM; | |
| req_data = kzalloc(job->request_payload.payload_len, GFP_KERNEL); | |
| if (!req_data) | |
| goto out; | |
| sg_copy_to_buffer(job->request_payload.sg_list, | |
| job->request_payload.sg_cnt, req_data, | |
| job->request_payload.payload_len); | |
| /* make sure frame can always be built ... we copy | |
| * back only the requested length */ | |
| resp_data = kzalloc(max(job->reply_payload.payload_len, 128U), | |
| GFP_KERNEL); | |
| if (!resp_data) | |
| goto out_free_req; | |
| error = -EINVAL; | |
| if (req_data[0] != SMP_REQUEST) | |
| goto out_free_resp; | |
| /* set up default don't know response */ | |
| resp_data[0] = SMP_RESPONSE; | |
| resp_data[1] = req_data[1]; | |
| resp_data[2] = SMP_RESP_FUNC_UNK; | |
| switch (req_data[1]) { | |
| case SMP_REPORT_GENERAL: | |
| resp_data[2] = SMP_RESP_FUNC_ACC; | |
| resp_data[9] = sas_ha->num_phys; | |
| reslen = 32; | |
| break; | |
| case SMP_REPORT_MANUF_INFO: | |
| resp_data[2] = SMP_RESP_FUNC_ACC; | |
| memcpy(resp_data + 12, shost->hostt->name, | |
| SAS_EXPANDER_VENDOR_ID_LEN); | |
| memcpy(resp_data + 20, "libsas virt phy", | |
| SAS_EXPANDER_PRODUCT_ID_LEN); | |
| reslen = 64; | |
| break; | |
| case SMP_READ_GPIO_REG: | |
| /* FIXME: need GPIO support in the transport class */ | |
| break; | |
| case SMP_DISCOVER: | |
| if (job->request_payload.payload_len < 16) | |
| goto out_free_resp; | |
| sas_host_smp_discover(sas_ha, resp_data, req_data[9]); | |
| reslen = 56; | |
| break; | |
| case SMP_REPORT_PHY_ERR_LOG: | |
| /* FIXME: could implement this with additional | |
| * libsas callbacks providing the HW supports it */ | |
| break; | |
| case SMP_REPORT_PHY_SATA: | |
| if (job->request_payload.payload_len < 16) | |
| goto out_free_resp; | |
| sas_report_phy_sata(sas_ha, resp_data, req_data[9]); | |
| reslen = 60; | |
| break; | |
| case SMP_REPORT_ROUTE_INFO: | |
| /* Can't implement; hosts have no routes */ | |
| break; | |
| case SMP_WRITE_GPIO_REG: { | |
| /* SFF-8485 v0.7 */ | |
| const int base_frame_size = 11; | |
| int to_write = req_data[4]; | |
| if (job->request_payload.payload_len < | |
| base_frame_size + to_write * 4) { | |
| resp_data[2] = SMP_RESP_INV_FRM_LEN; | |
| break; | |
| } | |
| to_write = sas_host_smp_write_gpio(sas_ha, resp_data, req_data[2], | |
| req_data[3], to_write, &req_data[8]); | |
| reslen = 8; | |
| break; | |
| } | |
| case SMP_CONF_ROUTE_INFO: | |
| /* Can't implement; hosts have no routes */ | |
| break; | |
| case SMP_PHY_CONTROL: | |
| if (job->request_payload.payload_len < 44) | |
| goto out_free_resp; | |
| sas_phy_control(sas_ha, req_data[9], req_data[10], | |
| req_data[32] >> 4, req_data[33] >> 4, | |
| resp_data); | |
| reslen = 8; | |
| break; | |
| case SMP_PHY_TEST_FUNCTION: | |
| /* FIXME: should this be implemented? */ | |
| break; | |
| default: | |
| /* probably a 2.0 function */ | |
| break; | |
| } | |
| sg_copy_from_buffer(job->reply_payload.sg_list, | |
| job->reply_payload.sg_cnt, resp_data, | |
| job->reply_payload.payload_len); | |
| error = 0; | |
| out_free_resp: | |
| kfree(resp_data); | |
| out_free_req: | |
| kfree(req_data); | |
| out: | |
| bsg_job_done(job, error, reslen); | |
| } |