| /* |
| SCSI Tape Driver for Linux version 1.1 and newer. See the accompanying |
| file Documentation/scsi/st.txt for more information. |
| |
| History: |
| Rewritten from Dwayne Forsyth's SCSI tape driver by Kai Makisara. |
| Contribution and ideas from several people including (in alphabetical |
| order) Klaus Ehrenfried, Eugene Exarevsky, Eric Lee Green, Wolfgang Denk, |
| Steve Hirsch, Andreas Koppenh"ofer, Michael Leodolter, Eyal Lebedinsky, |
| Michael Schaefer, J"org Weule, and Eric Youngdale. |
| |
| Copyright 1992 - 2016 Kai Makisara |
| email Kai.Makisara@kolumbus.fi |
| |
| Some small formal changes - aeb, 950809 |
| |
| Last modified: 18-JAN-1998 Richard Gooch <rgooch@atnf.csiro.au> Devfs support |
| */ |
| |
| static const char *verstr = "20160209"; |
| |
| #include <linux/module.h> |
| |
| #include <linux/fs.h> |
| #include <linux/kernel.h> |
| #include <linux/sched/signal.h> |
| #include <linux/mm.h> |
| #include <linux/init.h> |
| #include <linux/string.h> |
| #include <linux/slab.h> |
| #include <linux/errno.h> |
| #include <linux/mtio.h> |
| #include <linux/cdrom.h> |
| #include <linux/ioctl.h> |
| #include <linux/fcntl.h> |
| #include <linux/spinlock.h> |
| #include <linux/blkdev.h> |
| #include <linux/moduleparam.h> |
| #include <linux/cdev.h> |
| #include <linux/idr.h> |
| #include <linux/delay.h> |
| #include <linux/mutex.h> |
| |
| #include <linux/uaccess.h> |
| #include <asm/dma.h> |
| |
| #include <scsi/scsi.h> |
| #include <scsi/scsi_dbg.h> |
| #include <scsi/scsi_device.h> |
| #include <scsi/scsi_driver.h> |
| #include <scsi/scsi_eh.h> |
| #include <scsi/scsi_host.h> |
| #include <scsi/scsi_ioctl.h> |
| #include <scsi/sg.h> |
| |
| |
| /* The driver prints some debugging information on the console if DEBUG |
| is defined and non-zero. */ |
| #define DEBUG 1 |
| #define NO_DEBUG 0 |
| |
| #define ST_DEB_MSG KERN_NOTICE |
| #if DEBUG |
| /* The message level for the debug messages is currently set to KERN_NOTICE |
| so that people can easily see the messages. Later when the debugging messages |
| in the drivers are more widely classified, this may be changed to KERN_DEBUG. */ |
| #define DEB(a) a |
| #define DEBC(a) if (debugging) { a ; } |
| #else |
| #define DEB(a) |
| #define DEBC(a) |
| #endif |
| |
| #define ST_KILOBYTE 1024 |
| |
| #include "st_options.h" |
| #include "st.h" |
| |
| static int buffer_kbs; |
| static int max_sg_segs; |
| static int try_direct_io = TRY_DIRECT_IO; |
| static int try_rdio = 1; |
| static int try_wdio = 1; |
| static int debug_flag; |
| |
| static struct class st_sysfs_class; |
| static const struct attribute_group *st_dev_groups[]; |
| static const struct attribute_group *st_drv_groups[]; |
| |
| MODULE_AUTHOR("Kai Makisara"); |
| MODULE_DESCRIPTION("SCSI tape (st) driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS_CHARDEV_MAJOR(SCSI_TAPE_MAJOR); |
| MODULE_ALIAS_SCSI_DEVICE(TYPE_TAPE); |
| |
| /* Set 'perm' (4th argument) to 0 to disable module_param's definition |
| * of sysfs parameters (which module_param doesn't yet support). |
| * Sysfs parameters defined explicitly later. |
| */ |
| module_param_named(buffer_kbs, buffer_kbs, int, 0); |
| MODULE_PARM_DESC(buffer_kbs, "Default driver buffer size for fixed block mode (KB; 32)"); |
| module_param_named(max_sg_segs, max_sg_segs, int, 0); |
| MODULE_PARM_DESC(max_sg_segs, "Maximum number of scatter/gather segments to use (256)"); |
| module_param_named(try_direct_io, try_direct_io, int, 0); |
| MODULE_PARM_DESC(try_direct_io, "Try direct I/O between user buffer and tape drive (1)"); |
| module_param_named(debug_flag, debug_flag, int, 0); |
| MODULE_PARM_DESC(debug_flag, "Enable DEBUG, same as setting debugging=1"); |
| |
| |
| /* Extra parameters for testing */ |
| module_param_named(try_rdio, try_rdio, int, 0); |
| MODULE_PARM_DESC(try_rdio, "Try direct read i/o when possible"); |
| module_param_named(try_wdio, try_wdio, int, 0); |
| MODULE_PARM_DESC(try_wdio, "Try direct write i/o when possible"); |
| |
| #ifndef MODULE |
| static int write_threshold_kbs; /* retained for compatibility */ |
| static struct st_dev_parm { |
| char *name; |
| int *val; |
| } parms[] __initdata = { |
| { |
| "buffer_kbs", &buffer_kbs |
| }, |
| { /* Retained for compatibility with 2.4 */ |
| "write_threshold_kbs", &write_threshold_kbs |
| }, |
| { |
| "max_sg_segs", NULL |
| }, |
| { |
| "try_direct_io", &try_direct_io |
| }, |
| { |
| "debug_flag", &debug_flag |
| } |
| }; |
| #endif |
| |
| /* Restrict the number of modes so that names for all are assigned */ |
| #if ST_NBR_MODES > 16 |
| #error "Maximum number of modes is 16" |
| #endif |
| /* Bit reversed order to get same names for same minors with all |
| mode counts */ |
| static const char *st_formats[] = { |
| "", "r", "k", "s", "l", "t", "o", "u", |
| "m", "v", "p", "x", "a", "y", "q", "z"}; |
| |
| /* The default definitions have been moved to st_options.h */ |
| |
| #define ST_FIXED_BUFFER_SIZE (ST_FIXED_BUFFER_BLOCKS * ST_KILOBYTE) |
| |
| /* The buffer size should fit into the 24 bits for length in the |
| 6-byte SCSI read and write commands. */ |
| #if ST_FIXED_BUFFER_SIZE >= (2 << 24 - 1) |
| #error "Buffer size should not exceed (2 << 24 - 1) bytes!" |
| #endif |
| |
| static int debugging = DEBUG; |
| |
| #define MAX_RETRIES 0 |
| #define MAX_WRITE_RETRIES 0 |
| #define MAX_READY_RETRIES 0 |
| #define NO_TAPE NOT_READY |
| |
| #define ST_TIMEOUT (900 * HZ) |
| #define ST_LONG_TIMEOUT (14000 * HZ) |
| |
| /* Remove mode bits and auto-rewind bit (7) */ |
| #define TAPE_NR(x) ( ((iminor(x) & ~255) >> (ST_NBR_MODE_BITS + 1)) | \ |
| (iminor(x) & ~(-1 << ST_MODE_SHIFT)) ) |
| #define TAPE_MODE(x) ((iminor(x) & ST_MODE_MASK) >> ST_MODE_SHIFT) |
| |
| /* Construct the minor number from the device (d), mode (m), and non-rewind (n) data */ |
| #define TAPE_MINOR(d, m, n) (((d & ~(255 >> (ST_NBR_MODE_BITS + 1))) << (ST_NBR_MODE_BITS + 1)) | \ |
| (d & (255 >> (ST_NBR_MODE_BITS + 1))) | (m << ST_MODE_SHIFT) | ((n != 0) << 7) ) |
| |
| /* Internal ioctl to set both density (uppermost 8 bits) and blocksize (lower |
| 24 bits) */ |
| #define SET_DENS_AND_BLK 0x10001 |
| |
| static int st_fixed_buffer_size = ST_FIXED_BUFFER_SIZE; |
| static int st_max_sg_segs = ST_MAX_SG; |
| |
| static int modes_defined; |
| |
| static int enlarge_buffer(struct st_buffer *, int, int); |
| static void clear_buffer(struct st_buffer *); |
| static void normalize_buffer(struct st_buffer *); |
| static int append_to_buffer(const char __user *, struct st_buffer *, int); |
| static int from_buffer(struct st_buffer *, char __user *, int); |
| static void move_buffer_data(struct st_buffer *, int); |
| |
| static int sgl_map_user_pages(struct st_buffer *, const unsigned int, |
| unsigned long, size_t, int); |
| static int sgl_unmap_user_pages(struct st_buffer *, const unsigned int, int); |
| |
| static int st_probe(struct device *); |
| static int st_remove(struct device *); |
| |
| static struct scsi_driver st_template = { |
| .gendrv = { |
| .name = "st", |
| .owner = THIS_MODULE, |
| .probe = st_probe, |
| .remove = st_remove, |
| .groups = st_drv_groups, |
| }, |
| }; |
| |
| static int st_compression(struct scsi_tape *, int); |
| |
| static int find_partition(struct scsi_tape *); |
| static int switch_partition(struct scsi_tape *); |
| |
| static int st_int_ioctl(struct scsi_tape *, unsigned int, unsigned long); |
| |
| static void scsi_tape_release(struct kref *); |
| |
| #define to_scsi_tape(obj) container_of(obj, struct scsi_tape, kref) |
| |
| static DEFINE_MUTEX(st_ref_mutex); |
| static DEFINE_SPINLOCK(st_index_lock); |
| static DEFINE_SPINLOCK(st_use_lock); |
| static DEFINE_IDR(st_index_idr); |
| |
| |
| |
| #include "osst_detect.h" |
| #ifndef SIGS_FROM_OSST |
| #define SIGS_FROM_OSST \ |
| {"OnStream", "SC-", "", "osst"}, \ |
| {"OnStream", "DI-", "", "osst"}, \ |
| {"OnStream", "DP-", "", "osst"}, \ |
| {"OnStream", "USB", "", "osst"}, \ |
| {"OnStream", "FW-", "", "osst"} |
| #endif |
| |
| static struct scsi_tape *scsi_tape_get(int dev) |
| { |
| struct scsi_tape *STp = NULL; |
| |
| mutex_lock(&st_ref_mutex); |
| spin_lock(&st_index_lock); |
| |
| STp = idr_find(&st_index_idr, dev); |
| if (!STp) goto out; |
| |
| kref_get(&STp->kref); |
| |
| if (!STp->device) |
| goto out_put; |
| |
| if (scsi_device_get(STp->device)) |
| goto out_put; |
| |
| goto out; |
| |
| out_put: |
| kref_put(&STp->kref, scsi_tape_release); |
| STp = NULL; |
| out: |
| spin_unlock(&st_index_lock); |
| mutex_unlock(&st_ref_mutex); |
| return STp; |
| } |
| |
| static void scsi_tape_put(struct scsi_tape *STp) |
| { |
| struct scsi_device *sdev = STp->device; |
| |
| mutex_lock(&st_ref_mutex); |
| kref_put(&STp->kref, scsi_tape_release); |
| scsi_device_put(sdev); |
| mutex_unlock(&st_ref_mutex); |
| } |
| |
| struct st_reject_data { |
| char *vendor; |
| char *model; |
| char *rev; |
| char *driver_hint; /* Name of the correct driver, NULL if unknown */ |
| }; |
| |
| static struct st_reject_data reject_list[] = { |
| /* {"XXX", "Yy-", "", NULL}, example */ |
| SIGS_FROM_OSST, |
| {NULL, }}; |
| |
| /* If the device signature is on the list of incompatible drives, the |
| function returns a pointer to the name of the correct driver (if known) */ |
| static char * st_incompatible(struct scsi_device* SDp) |
| { |
| struct st_reject_data *rp; |
| |
| for (rp=&(reject_list[0]); rp->vendor != NULL; rp++) |
| if (!strncmp(rp->vendor, SDp->vendor, strlen(rp->vendor)) && |
| !strncmp(rp->model, SDp->model, strlen(rp->model)) && |
| !strncmp(rp->rev, SDp->rev, strlen(rp->rev))) { |
| if (rp->driver_hint) |
| return rp->driver_hint; |
| else |
| return "unknown"; |
| } |
| return NULL; |
| } |
| |
| |
| static inline char *tape_name(struct scsi_tape *tape) |
| { |
| return tape->disk->disk_name; |
| } |
| |
| #define st_printk(prefix, t, fmt, a...) \ |
| sdev_prefix_printk(prefix, (t)->device, tape_name(t), fmt, ##a) |
| #ifdef DEBUG |
| #define DEBC_printk(t, fmt, a...) \ |
| if (debugging) { st_printk(ST_DEB_MSG, t, fmt, ##a ); } |
| #else |
| #define DEBC_printk(t, fmt, a...) |
| #endif |
| |
| static void st_analyze_sense(struct st_request *SRpnt, struct st_cmdstatus *s) |
| { |
| const u8 *ucp; |
| const u8 *sense = SRpnt->sense; |
| |
| s->have_sense = scsi_normalize_sense(SRpnt->sense, |
| SCSI_SENSE_BUFFERSIZE, &s->sense_hdr); |
| s->flags = 0; |
| |
| if (s->have_sense) { |
| s->deferred = 0; |
| s->remainder_valid = |
| scsi_get_sense_info_fld(sense, SCSI_SENSE_BUFFERSIZE, &s->uremainder64); |
| switch (sense[0] & 0x7f) { |
| case 0x71: |
| s->deferred = 1; |
| case 0x70: |
| s->fixed_format = 1; |
| s->flags = sense[2] & 0xe0; |
| break; |
| case 0x73: |
| s->deferred = 1; |
| case 0x72: |
| s->fixed_format = 0; |
| ucp = scsi_sense_desc_find(sense, SCSI_SENSE_BUFFERSIZE, 4); |
| s->flags = ucp ? (ucp[3] & 0xe0) : 0; |
| break; |
| } |
| } |
| } |
| |
| |
| /* Convert the result to success code */ |
| static int st_chk_result(struct scsi_tape *STp, struct st_request * SRpnt) |
| { |
| int result = SRpnt->result; |
| u8 scode; |
| DEB(const char *stp;) |
| char *name = tape_name(STp); |
| struct st_cmdstatus *cmdstatp; |
| |
| if (!result) |
| return 0; |
| |
| cmdstatp = &STp->buffer->cmdstat; |
| st_analyze_sense(SRpnt, cmdstatp); |
| |
| if (cmdstatp->have_sense) |
| scode = STp->buffer->cmdstat.sense_hdr.sense_key; |
| else |
| scode = 0; |
| |
| DEB( |
| if (debugging) { |
| st_printk(ST_DEB_MSG, STp, |
| "Error: %x, cmd: %x %x %x %x %x %x\n", result, |
| SRpnt->cmd[0], SRpnt->cmd[1], SRpnt->cmd[2], |
| SRpnt->cmd[3], SRpnt->cmd[4], SRpnt->cmd[5]); |
| if (cmdstatp->have_sense) |
| __scsi_print_sense(STp->device, name, |
| SRpnt->sense, SCSI_SENSE_BUFFERSIZE); |
| } ) /* end DEB */ |
| if (!debugging) { /* Abnormal conditions for tape */ |
| if (!cmdstatp->have_sense) |
| st_printk(KERN_WARNING, STp, |
| "Error %x (driver bt 0x%x, host bt 0x%x).\n", |
| result, driver_byte(result), host_byte(result)); |
| else if (cmdstatp->have_sense && |
| scode != NO_SENSE && |
| scode != RECOVERED_ERROR && |
| /* scode != UNIT_ATTENTION && */ |
| scode != BLANK_CHECK && |
| scode != VOLUME_OVERFLOW && |
| SRpnt->cmd[0] != MODE_SENSE && |
| SRpnt->cmd[0] != TEST_UNIT_READY) { |
| |
| __scsi_print_sense(STp->device, name, |
| SRpnt->sense, SCSI_SENSE_BUFFERSIZE); |
| } |
| } |
| |
| if (cmdstatp->fixed_format && |
| STp->cln_mode >= EXTENDED_SENSE_START) { /* Only fixed format sense */ |
| if (STp->cln_sense_value) |
| STp->cleaning_req |= ((SRpnt->sense[STp->cln_mode] & |
| STp->cln_sense_mask) == STp->cln_sense_value); |
| else |
| STp->cleaning_req |= ((SRpnt->sense[STp->cln_mode] & |
| STp->cln_sense_mask) != 0); |
| } |
| if (cmdstatp->have_sense && |
| cmdstatp->sense_hdr.asc == 0 && cmdstatp->sense_hdr.ascq == 0x17) |
| STp->cleaning_req = 1; /* ASC and ASCQ => cleaning requested */ |
| |
| STp->pos_unknown |= STp->device->was_reset; |
| |
| if (cmdstatp->have_sense && |
| scode == RECOVERED_ERROR |
| #if ST_RECOVERED_WRITE_FATAL |
| && SRpnt->cmd[0] != WRITE_6 |
| && SRpnt->cmd[0] != WRITE_FILEMARKS |
| #endif |
| ) { |
| STp->recover_count++; |
| STp->recover_reg++; |
| |
| DEB( |
| if (debugging) { |
| if (SRpnt->cmd[0] == READ_6) |
| stp = "read"; |
| else if (SRpnt->cmd[0] == WRITE_6) |
| stp = "write"; |
| else |
| stp = "ioctl"; |
| st_printk(ST_DEB_MSG, STp, |
| "Recovered %s error (%d).\n", |
| stp, STp->recover_count); |
| } ) /* end DEB */ |
| |
| if (cmdstatp->flags == 0) |
| return 0; |
| } |
| return (-EIO); |
| } |
| |
| static struct st_request *st_allocate_request(struct scsi_tape *stp) |
| { |
| struct st_request *streq; |
| |
| streq = kzalloc(sizeof(*streq), GFP_KERNEL); |
| if (streq) |
| streq->stp = stp; |
| else { |
| st_printk(KERN_ERR, stp, |
| "Can't get SCSI request.\n"); |
| if (signal_pending(current)) |
| stp->buffer->syscall_result = -EINTR; |
| else |
| stp->buffer->syscall_result = -EBUSY; |
| } |
| |
| return streq; |
| } |
| |
| static void st_release_request(struct st_request *streq) |
| { |
| kfree(streq); |
| } |
| |
| static void st_do_stats(struct scsi_tape *STp, struct request *req) |
| { |
| ktime_t now; |
| |
| now = ktime_get(); |
| if (scsi_req(req)->cmd[0] == WRITE_6) { |
| now = ktime_sub(now, STp->stats->write_time); |
| atomic64_add(ktime_to_ns(now), &STp->stats->tot_write_time); |
| atomic64_add(ktime_to_ns(now), &STp->stats->tot_io_time); |
| atomic64_inc(&STp->stats->write_cnt); |
| if (scsi_req(req)->result) { |
| atomic64_add(atomic_read(&STp->stats->last_write_size) |
| - STp->buffer->cmdstat.residual, |
| &STp->stats->write_byte_cnt); |
| if (STp->buffer->cmdstat.residual > 0) |
| atomic64_inc(&STp->stats->resid_cnt); |
| } else |
| atomic64_add(atomic_read(&STp->stats->last_write_size), |
| &STp->stats->write_byte_cnt); |
| } else if (scsi_req(req)->cmd[0] == READ_6) { |
| now = ktime_sub(now, STp->stats->read_time); |
| atomic64_add(ktime_to_ns(now), &STp->stats->tot_read_time); |
| atomic64_add(ktime_to_ns(now), &STp->stats->tot_io_time); |
| atomic64_inc(&STp->stats->read_cnt); |
| if (scsi_req(req)->result) { |
| atomic64_add(atomic_read(&STp->stats->last_read_size) |
| - STp->buffer->cmdstat.residual, |
| &STp->stats->read_byte_cnt); |
| if (STp->buffer->cmdstat.residual > 0) |
| atomic64_inc(&STp->stats->resid_cnt); |
| } else |
| atomic64_add(atomic_read(&STp->stats->last_read_size), |
| &STp->stats->read_byte_cnt); |
| } else { |
| now = ktime_sub(now, STp->stats->other_time); |
| atomic64_add(ktime_to_ns(now), &STp->stats->tot_io_time); |
| atomic64_inc(&STp->stats->other_cnt); |
| } |
| atomic64_dec(&STp->stats->in_flight); |
| } |
| |
| static void st_scsi_execute_end(struct request *req, blk_status_t status) |
| { |
| struct st_request *SRpnt = req->end_io_data; |
| struct scsi_request *rq = scsi_req(req); |
| struct scsi_tape *STp = SRpnt->stp; |
| struct bio *tmp; |
| |
| STp->buffer->cmdstat.midlevel_result = SRpnt->result = rq->result; |
| STp->buffer->cmdstat.residual = rq->resid_len; |
| |
| st_do_stats(STp, req); |
| |
| tmp = SRpnt->bio; |
| if (rq->sense_len) |
| memcpy(SRpnt->sense, rq->sense, SCSI_SENSE_BUFFERSIZE); |
| if (SRpnt->waiting) |
| complete(SRpnt->waiting); |
| |
| blk_rq_unmap_user(tmp); |
| __blk_put_request(req->q, req); |
| } |
| |
| static int st_scsi_execute(struct st_request *SRpnt, const unsigned char *cmd, |
| int data_direction, void *buffer, unsigned bufflen, |
| int timeout, int retries) |
| { |
| struct request *req; |
| struct scsi_request *rq; |
| struct rq_map_data *mdata = &SRpnt->stp->buffer->map_data; |
| int err = 0; |
| struct scsi_tape *STp = SRpnt->stp; |
| |
| req = blk_get_request(SRpnt->stp->device->request_queue, |
| data_direction == DMA_TO_DEVICE ? |
| REQ_OP_SCSI_OUT : REQ_OP_SCSI_IN, GFP_KERNEL); |
| if (IS_ERR(req)) |
| return DRIVER_ERROR << 24; |
| rq = scsi_req(req); |
| req->rq_flags |= RQF_QUIET; |
| |
| mdata->null_mapped = 1; |
| |
| if (bufflen) { |
| err = blk_rq_map_user(req->q, req, mdata, NULL, bufflen, |
| GFP_KERNEL); |
| if (err) { |
| blk_put_request(req); |
| return DRIVER_ERROR << 24; |
| } |
| } |
| |
| atomic64_inc(&STp->stats->in_flight); |
| if (cmd[0] == WRITE_6) { |
| atomic_set(&STp->stats->last_write_size, bufflen); |
| STp->stats->write_time = ktime_get(); |
| } else if (cmd[0] == READ_6) { |
| atomic_set(&STp->stats->last_read_size, bufflen); |
| STp->stats->read_time = ktime_get(); |
| } else { |
| STp->stats->other_time = ktime_get(); |
| } |
| |
| SRpnt->bio = req->bio; |
| rq->cmd_len = COMMAND_SIZE(cmd[0]); |
| memset(rq->cmd, 0, BLK_MAX_CDB); |
| memcpy(rq->cmd, cmd, rq->cmd_len); |
| req->timeout = timeout; |
| rq->retries = retries; |
| req->end_io_data = SRpnt; |
| |
| blk_execute_rq_nowait(req->q, NULL, req, 1, st_scsi_execute_end); |
| return 0; |
| } |
| |
| /* Do the scsi command. Waits until command performed if do_wait is true. |
| Otherwise write_behind_check() is used to check that the command |
| has finished. */ |
| static struct st_request * |
| st_do_scsi(struct st_request * SRpnt, struct scsi_tape * STp, unsigned char *cmd, |
| int bytes, int direction, int timeout, int retries, int do_wait) |
| { |
| struct completion *waiting; |
| struct rq_map_data *mdata = &STp->buffer->map_data; |
| int ret; |
| |
| /* if async, make sure there's no command outstanding */ |
| if (!do_wait && ((STp->buffer)->last_SRpnt)) { |
| st_printk(KERN_ERR, STp, |
| "Async command already active.\n"); |
| if (signal_pending(current)) |
| (STp->buffer)->syscall_result = (-EINTR); |
| else |
| (STp->buffer)->syscall_result = (-EBUSY); |
| return NULL; |
| } |
| |
| if (!SRpnt) { |
| SRpnt = st_allocate_request(STp); |
| if (!SRpnt) |
| return NULL; |
| } |
| |
| /* If async IO, set last_SRpnt. This ptr tells write_behind_check |
| which IO is outstanding. It's nulled out when the IO completes. */ |
| if (!do_wait) |
| (STp->buffer)->last_SRpnt = SRpnt; |
| |
| waiting = &STp->wait; |
| init_completion(waiting); |
| SRpnt->waiting = waiting; |
| |
| if (STp->buffer->do_dio) { |
| mdata->page_order = 0; |
| mdata->nr_entries = STp->buffer->sg_segs; |
| mdata->pages = STp->buffer->mapped_pages; |
| } else { |
| mdata->page_order = STp->buffer->reserved_page_order; |
| mdata->nr_entries = |
| DIV_ROUND_UP(bytes, PAGE_SIZE << mdata->page_order); |
| mdata->pages = STp->buffer->reserved_pages; |
| mdata->offset = 0; |
| } |
| |
| memcpy(SRpnt->cmd, cmd, sizeof(SRpnt->cmd)); |
| STp->buffer->cmdstat.have_sense = 0; |
| STp->buffer->syscall_result = 0; |
| |
| ret = st_scsi_execute(SRpnt, cmd, direction, NULL, bytes, timeout, |
| retries); |
| if (ret) { |
| /* could not allocate the buffer or request was too large */ |
| (STp->buffer)->syscall_result = (-EBUSY); |
| (STp->buffer)->last_SRpnt = NULL; |
| } else if (do_wait) { |
| wait_for_completion(waiting); |
| SRpnt->waiting = NULL; |
| (STp->buffer)->syscall_result = st_chk_result(STp, SRpnt); |
| } |
| |
| return SRpnt; |
| } |
| |
| |
| /* Handle the write-behind checking (waits for completion). Returns -ENOSPC if |
| write has been correct but EOM early warning reached, -EIO if write ended in |
| error or zero if write successful. Asynchronous writes are used only in |
| variable block mode. */ |
| static int write_behind_check(struct scsi_tape * STp) |
| { |
| int retval = 0; |
| struct st_buffer *STbuffer; |
| struct st_partstat *STps; |
| struct st_cmdstatus *cmdstatp; |
| struct st_request *SRpnt; |
| |
| STbuffer = STp->buffer; |
| if (!STbuffer->writing) |
| return 0; |
| |
| DEB( |
| if (STp->write_pending) |
| STp->nbr_waits++; |
| else |
| STp->nbr_finished++; |
| ) /* end DEB */ |
| |
| wait_for_completion(&(STp->wait)); |
| SRpnt = STbuffer->last_SRpnt; |
| STbuffer->last_SRpnt = NULL; |
| SRpnt->waiting = NULL; |
| |
| (STp->buffer)->syscall_result = st_chk_result(STp, SRpnt); |
| st_release_request(SRpnt); |
| |
| STbuffer->buffer_bytes -= STbuffer->writing; |
| STps = &(STp->ps[STp->partition]); |
| if (STps->drv_block >= 0) { |
| if (STp->block_size == 0) |
| STps->drv_block++; |
| else |
| STps->drv_block += STbuffer->writing / STp->block_size; |
| } |
| |
| cmdstatp = &STbuffer->cmdstat; |
| if (STbuffer->syscall_result) { |
| retval = -EIO; |
| if (cmdstatp->have_sense && !cmdstatp->deferred && |
| (cmdstatp->flags & SENSE_EOM) && |
| (cmdstatp->sense_hdr.sense_key == NO_SENSE || |
| cmdstatp->sense_hdr.sense_key == RECOVERED_ERROR)) { |
| /* EOM at write-behind, has all data been written? */ |
| if (!cmdstatp->remainder_valid || |
| cmdstatp->uremainder64 == 0) |
| retval = -ENOSPC; |
| } |
| if (retval == -EIO) |
| STps->drv_block = -1; |
| } |
| STbuffer->writing = 0; |
| |
| DEB(if (debugging && retval) |
| st_printk(ST_DEB_MSG, STp, |
| "Async write error %x, return value %d.\n", |
| STbuffer->cmdstat.midlevel_result, retval);) /* end DEB */ |
| |
| return retval; |
| } |
| |
| |
| /* Step over EOF if it has been inadvertently crossed (ioctl not used because |
| it messes up the block number). */ |
| static int cross_eof(struct scsi_tape * STp, int forward) |
| { |
| struct st_request *SRpnt; |
| unsigned char cmd[MAX_COMMAND_SIZE]; |
| |
| cmd[0] = SPACE; |
| cmd[1] = 0x01; /* Space FileMarks */ |
| if (forward) { |
| cmd[2] = cmd[3] = 0; |
| cmd[4] = 1; |
| } else |
| cmd[2] = cmd[3] = cmd[4] = 0xff; /* -1 filemarks */ |
| cmd[5] = 0; |
| |
| DEBC_printk(STp, "Stepping over filemark %s.\n", |
| forward ? "forward" : "backward"); |
| |
| SRpnt = st_do_scsi(NULL, STp, cmd, 0, DMA_NONE, |
| STp->device->request_queue->rq_timeout, |
| MAX_RETRIES, 1); |
| if (!SRpnt) |
| return (STp->buffer)->syscall_result; |
| |
| st_release_request(SRpnt); |
| SRpnt = NULL; |
| |
| if ((STp->buffer)->cmdstat.midlevel_result != 0) |
| st_printk(KERN_ERR, STp, |
| "Stepping over filemark %s failed.\n", |
| forward ? "forward" : "backward"); |
| |
| return (STp->buffer)->syscall_result; |
| } |
| |
| |
| /* Flush the write buffer (never need to write if variable blocksize). */ |
| static int st_flush_write_buffer(struct scsi_tape * STp) |
| { |
| int transfer, blks; |
| int result; |
| unsigned char cmd[MAX_COMMAND_SIZE]; |
| struct st_request *SRpnt; |
| struct st_partstat *STps; |
| |
| result = write_behind_check(STp); |
| if (result) |
| return result; |
| |
| result = 0; |
| if (STp->dirty == 1) { |
| |
| transfer = STp->buffer->buffer_bytes; |
| DEBC_printk(STp, "Flushing %d bytes.\n", transfer); |
| |
| memset(cmd, 0, MAX_COMMAND_SIZE); |
| cmd[0] = WRITE_6; |
| cmd[1] = 1; |
| blks = transfer / STp->block_size; |
| cmd[2] = blks >> 16; |
| cmd[3] = blks >> 8; |
| cmd[4] = blks; |
| |
| SRpnt = st_do_scsi(NULL, STp, cmd, transfer, DMA_TO_DEVICE, |
| STp->device->request_queue->rq_timeout, |
| MAX_WRITE_RETRIES, 1); |
| if (!SRpnt) |
| return (STp->buffer)->syscall_result; |
| |
| STps = &(STp->ps[STp->partition]); |
| if ((STp->buffer)->syscall_result != 0) { |
| struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat; |
| |
| if (cmdstatp->have_sense && !cmdstatp->deferred && |
| (cmdstatp->flags & SENSE_EOM) && |
| (cmdstatp->sense_hdr.sense_key == NO_SENSE || |
| cmdstatp->sense_hdr.sense_key == RECOVERED_ERROR) && |
| (!cmdstatp->remainder_valid || |
| cmdstatp->uremainder64 == 0)) { /* All written at EOM early warning */ |
| STp->dirty = 0; |
| (STp->buffer)->buffer_bytes = 0; |
| if (STps->drv_block >= 0) |
| STps->drv_block += blks; |
| result = (-ENOSPC); |
| } else { |
| st_printk(KERN_ERR, STp, "Error on flush.\n"); |
| STps->drv_block = (-1); |
| result = (-EIO); |
| } |
| } else { |
| if (STps->drv_block >= 0) |
| STps->drv_block += blks; |
| STp->dirty = 0; |
| (STp->buffer)->buffer_bytes = 0; |
| } |
| st_release_request(SRpnt); |
| SRpnt = NULL; |
| } |
| return result; |
| } |
| |
| |
| /* Flush the tape buffer. The tape will be positioned correctly unless |
| seek_next is true. */ |
| static int flush_buffer(struct scsi_tape *STp, int seek_next) |
| { |
| int backspace, result; |
| struct st_buffer *STbuffer; |
| struct st_partstat *STps; |
| |
| STbuffer = STp->buffer; |
| |
| /* |
| * If there was a bus reset, block further access |
| * to this device. |
| */ |
| if (STp->pos_unknown) |
| return (-EIO); |
| |
| if (STp->ready != ST_READY) |
| return 0; |
| STps = &(STp->ps[STp->partition]); |
| if (STps->rw == ST_WRITING) /* Writing */ |
| return st_flush_write_buffer(STp); |
| |
| if (STp->block_size == 0) |
| return 0; |
| |
| backspace = ((STp->buffer)->buffer_bytes + |
| (STp->buffer)->read_pointer) / STp->block_size - |
| ((STp->buffer)->read_pointer + STp->block_size - 1) / |
| STp->block_size; |
| (STp->buffer)->buffer_bytes = 0; |
| (STp->buffer)->read_pointer = 0; |
| result = 0; |
| if (!seek_next) { |
| if (STps->eof == ST_FM_HIT) { |
| result = cross_eof(STp, 0); /* Back over the EOF hit */ |
| if (!result) |
| STps->eof = ST_NOEOF; |
| else { |
| if (STps->drv_file >= 0) |
| STps->drv_file++; |
| STps->drv_block = 0; |
| } |
| } |
| if (!result && backspace > 0) |
| result = st_int_ioctl(STp, MTBSR, backspace); |
| } else if (STps->eof == ST_FM_HIT) { |
| if (STps->drv_file >= 0) |
| STps->drv_file++; |
| STps->drv_block = 0; |
| STps->eof = ST_NOEOF; |
| } |
| return result; |
| |
| } |
| |
| /* Set the mode parameters */ |
| static int set_mode_densblk(struct scsi_tape * STp, struct st_modedef * STm) |
| { |
| int set_it = 0; |
| unsigned long arg; |
| |
| if (!STp->density_changed && |
| STm->default_density >= 0 && |
| STm->default_density != STp->density) { |
| arg = STm->default_density; |
| set_it = 1; |
| } else |
| arg = STp->density; |
| arg <<= MT_ST_DENSITY_SHIFT; |
| if (!STp->blksize_changed && |
| STm->default_blksize >= 0 && |
| STm->default_blksize != STp->block_size) { |
| arg |= STm->default_blksize; |
| set_it = 1; |
| } else |
| arg |= STp->block_size; |
| if (set_it && |
| st_int_ioctl(STp, SET_DENS_AND_BLK, arg)) { |
| st_printk(KERN_WARNING, STp, |
| "Can't set default block size to %d bytes " |
| "and density %x.\n", |
| STm->default_blksize, STm->default_density); |
| if (modes_defined) |
| return (-EINVAL); |
| } |
| return 0; |
| } |
| |
| |
| /* Lock or unlock the drive door. Don't use when st_request allocated. */ |
| static int do_door_lock(struct scsi_tape * STp, int do_lock) |
| { |
| int retval; |
| |
| DEBC_printk(STp, "%socking drive door.\n", do_lock ? "L" : "Unl"); |
| |
| retval = scsi_set_medium_removal(STp->device, |
| do_lock ? SCSI_REMOVAL_PREVENT : SCSI_REMOVAL_ALLOW); |
| if (!retval) |
| STp->door_locked = do_lock ? ST_LOCKED_EXPLICIT : ST_UNLOCKED; |
| else |
| STp->door_locked = ST_LOCK_FAILS; |
| return retval; |
| } |
| |
| |
| /* Set the internal state after reset */ |
| static void reset_state(struct scsi_tape *STp) |
| { |
| int i; |
| struct st_partstat *STps; |
| |
| STp->pos_unknown = 0; |
| for (i = 0; i < ST_NBR_PARTITIONS; i++) { |
| STps = &(STp->ps[i]); |
| STps->rw = ST_IDLE; |
| STps->eof = ST_NOEOF; |
| STps->at_sm = 0; |
| STps->last_block_valid = 0; |
| STps->drv_block = -1; |
| STps->drv_file = -1; |
| } |
| if (STp->can_partitions) { |
| STp->partition = find_partition(STp); |
| if (STp->partition < 0) |
| STp->partition = 0; |
| STp->new_partition = STp->partition; |
| } |
| } |
| |
| /* Test if the drive is ready. Returns either one of the codes below or a negative system |
| error code. */ |
| #define CHKRES_READY 0 |
| #define CHKRES_NEW_SESSION 1 |
| #define CHKRES_NOT_READY 2 |
| #define CHKRES_NO_TAPE 3 |
| |
| #define MAX_ATTENTIONS 10 |
| |
| static int test_ready(struct scsi_tape *STp, int do_wait) |
| { |
| int attentions, waits, max_wait, scode; |
| int retval = CHKRES_READY, new_session = 0; |
| unsigned char cmd[MAX_COMMAND_SIZE]; |
| struct st_request *SRpnt = NULL; |
| struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat; |
| |
| max_wait = do_wait ? ST_BLOCK_SECONDS : 0; |
| |
| for (attentions=waits=0; ; ) { |
| memset((void *) &cmd[0], 0, MAX_COMMAND_SIZE); |
| cmd[0] = TEST_UNIT_READY; |
| SRpnt = st_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE, |
| STp->long_timeout, MAX_READY_RETRIES, 1); |
| |
| if (!SRpnt) { |
| retval = (STp->buffer)->syscall_result; |
| break; |
| } |
| |
| if (cmdstatp->have_sense) { |
| |
| scode = cmdstatp->sense_hdr.sense_key; |
| |
| if (scode == UNIT_ATTENTION) { /* New media? */ |
| new_session = 1; |
| if (attentions < MAX_ATTENTIONS) { |
| attentions++; |
| continue; |
| } |
| else { |
| retval = (-EIO); |
| break; |
| } |
| } |
| |
| if (scode == NOT_READY) { |
| if (waits < max_wait) { |
| if (msleep_interruptible(1000)) { |
| retval = (-EINTR); |
| break; |
| } |
| waits++; |
| continue; |
| } |
| else { |
| if ((STp->device)->scsi_level >= SCSI_2 && |
| cmdstatp->sense_hdr.asc == 0x3a) /* Check ASC */ |
| retval = CHKRES_NO_TAPE; |
| else |
| retval = CHKRES_NOT_READY; |
| break; |
| } |
| } |
| } |
| |
| retval = (STp->buffer)->syscall_result; |
| if (!retval) |
| retval = new_session ? CHKRES_NEW_SESSION : CHKRES_READY; |
| break; |
| } |
| |
| if (SRpnt != NULL) |
| st_release_request(SRpnt); |
| return retval; |
| } |
| |
| |
| /* See if the drive is ready and gather information about the tape. Return values: |
| < 0 negative error code from errno.h |
| 0 drive ready |
| 1 drive not ready (possibly no tape) |
| */ |
| static int check_tape(struct scsi_tape *STp, struct file *filp) |
| { |
| int i, retval, new_session = 0, do_wait; |
| unsigned char cmd[MAX_COMMAND_SIZE], saved_cleaning; |
| unsigned short st_flags = filp->f_flags; |
| struct st_request *SRpnt = NULL; |
| struct st_modedef *STm; |
| struct st_partstat *STps; |
| struct inode *inode = file_inode(filp); |
| int mode = TAPE_MODE(inode); |
| |
| STp->ready = ST_READY; |
| |
| if (mode != STp->current_mode) { |
| DEBC_printk(STp, "Mode change from %d to %d.\n", |
| STp->current_mode, mode); |
| new_session = 1; |
| STp->current_mode = mode; |
| } |
| STm = &(STp->modes[STp->current_mode]); |
| |
| saved_cleaning = STp->cleaning_req; |
| STp->cleaning_req = 0; |
| |
| do_wait = ((filp->f_flags & O_NONBLOCK) == 0); |
| retval = test_ready(STp, do_wait); |
| |
| if (retval < 0) |
| goto err_out; |
| |
| if (retval == CHKRES_NEW_SESSION) { |
| STp->pos_unknown = 0; |
| STp->partition = STp->new_partition = 0; |
| if (STp->can_partitions) |
| STp->nbr_partitions = 1; /* This guess will be updated later |
| if necessary */ |
| for (i = 0; i < ST_NBR_PARTITIONS; i++) { |
| STps = &(STp->ps[i]); |
| STps->rw = ST_IDLE; |
| STps->eof = ST_NOEOF; |
| STps->at_sm = 0; |
| STps->last_block_valid = 0; |
| STps->drv_block = 0; |
| STps->drv_file = 0; |
| } |
| new_session = 1; |
| } |
| else { |
| STp->cleaning_req |= saved_cleaning; |
| |
| if (retval == CHKRES_NOT_READY || retval == CHKRES_NO_TAPE) { |
| if (retval == CHKRES_NO_TAPE) |
| STp->ready = ST_NO_TAPE; |
| else |
| STp->ready = ST_NOT_READY; |
| |
| STp->density = 0; /* Clear the erroneous "residue" */ |
| STp->write_prot = 0; |
| STp->block_size = 0; |
| STp->ps[0].drv_file = STp->ps[0].drv_block = (-1); |
| STp->partition = STp->new_partition = 0; |
| STp->door_locked = ST_UNLOCKED; |
| return CHKRES_NOT_READY; |
| } |
| } |
| |
| if (STp->omit_blklims) |
| STp->min_block = STp->max_block = (-1); |
| else { |
| memset((void *) &cmd[0], 0, MAX_COMMAND_SIZE); |
| cmd[0] = READ_BLOCK_LIMITS; |
| |
| SRpnt = st_do_scsi(SRpnt, STp, cmd, 6, DMA_FROM_DEVICE, |
| STp->device->request_queue->rq_timeout, |
| MAX_READY_RETRIES, 1); |
| if (!SRpnt) { |
| retval = (STp->buffer)->syscall_result; |
| goto err_out; |
| } |
| |
| if (!SRpnt->result && !STp->buffer->cmdstat.have_sense) { |
| STp->max_block = ((STp->buffer)->b_data[1] << 16) | |
| ((STp->buffer)->b_data[2] << 8) | (STp->buffer)->b_data[3]; |
| STp->min_block = ((STp->buffer)->b_data[4] << 8) | |
| (STp->buffer)->b_data[5]; |
| if ( DEB( debugging || ) !STp->inited) |
| st_printk(KERN_INFO, STp, |
| "Block limits %d - %d bytes.\n", |
| STp->min_block, STp->max_block); |
| } else { |
| STp->min_block = STp->max_block = (-1); |
| DEBC_printk(STp, "Can't read block limits.\n"); |
| } |
| } |
| |
| memset((void *) &cmd[0], 0, MAX_COMMAND_SIZE); |
| cmd[0] = MODE_SENSE; |
| cmd[4] = 12; |
| |
| SRpnt = st_do_scsi(SRpnt, STp, cmd, 12, DMA_FROM_DEVICE, |
| STp->device->request_queue->rq_timeout, |
| MAX_READY_RETRIES, 1); |
| if (!SRpnt) { |
| retval = (STp->buffer)->syscall_result; |
| goto err_out; |
| } |
| |
| if ((STp->buffer)->syscall_result != 0) { |
| DEBC_printk(STp, "No Mode Sense.\n"); |
| STp->block_size = ST_DEFAULT_BLOCK; /* Educated guess (?) */ |
| (STp->buffer)->syscall_result = 0; /* Prevent error propagation */ |
| STp->drv_write_prot = 0; |
| } else { |
| DEBC_printk(STp,"Mode sense. Length %d, " |
| "medium %x, WBS %x, BLL %d\n", |
| (STp->buffer)->b_data[0], |
| (STp->buffer)->b_data[1], |
| (STp->buffer)->b_data[2], |
| (STp->buffer)->b_data[3]); |
| |
| if ((STp->buffer)->b_data[3] >= 8) { |
| STp->drv_buffer = ((STp->buffer)->b_data[2] >> 4) & 7; |
| STp->density = (STp->buffer)->b_data[4]; |
| STp->block_size = (STp->buffer)->b_data[9] * 65536 + |
| (STp->buffer)->b_data[10] * 256 + (STp->buffer)->b_data[11]; |
| DEBC_printk(STp, "Density %x, tape length: %x, " |
| "drv buffer: %d\n", |
| STp->density, |
| (STp->buffer)->b_data[5] * 65536 + |
| (STp->buffer)->b_data[6] * 256 + |
| (STp->buffer)->b_data[7], |
| STp->drv_buffer); |
| } |
| STp->drv_write_prot = ((STp->buffer)->b_data[2] & 0x80) != 0; |
| if (!STp->drv_buffer && STp->immediate_filemark) { |
| st_printk(KERN_WARNING, STp, |
| "non-buffered tape: disabling " |
| "writing immediate filemarks\n"); |
| STp->immediate_filemark = 0; |
| } |
| } |
| st_release_request(SRpnt); |
| SRpnt = NULL; |
| STp->inited = 1; |
| |
| if (STp->block_size > 0) |
| (STp->buffer)->buffer_blocks = |
| (STp->buffer)->buffer_size / STp->block_size; |
| else |
| (STp->buffer)->buffer_blocks = 1; |
| (STp->buffer)->buffer_bytes = (STp->buffer)->read_pointer = 0; |
| |
| DEBC_printk(STp, "Block size: %d, buffer size: %d (%d blocks).\n", |
| STp->block_size, (STp->buffer)->buffer_size, |
| (STp->buffer)->buffer_blocks); |
| |
| if (STp->drv_write_prot) { |
| STp->write_prot = 1; |
| |
| DEBC_printk(STp, "Write protected\n"); |
| |
| if (do_wait && |
| ((st_flags & O_ACCMODE) == O_WRONLY || |
| (st_flags & O_ACCMODE) == O_RDWR)) { |
| retval = (-EROFS); |
| goto err_out; |
| } |
| } |
| |
| if (STp->can_partitions && STp->nbr_partitions < 1) { |
| /* This code is reached when the device is opened for the first time |
| after the driver has been initialized with tape in the drive and the |
| partition support has been enabled. */ |
| DEBC_printk(STp, "Updating partition number in status.\n"); |
| if ((STp->partition = find_partition(STp)) < 0) { |
| retval = STp->partition; |
| goto err_out; |
| } |
| STp->new_partition = STp->partition; |
| STp->nbr_partitions = 1; /* This guess will be updated when necessary */ |
| } |
| |
| if (new_session) { /* Change the drive parameters for the new mode */ |
| STp->density_changed = STp->blksize_changed = 0; |
| STp->compression_changed = 0; |
| if (!(STm->defaults_for_writes) && |
| (retval = set_mode_densblk(STp, STm)) < 0) |
| goto err_out; |
| |
| if (STp->default_drvbuffer != 0xff) { |
| if (st_int_ioctl(STp, MTSETDRVBUFFER, STp->default_drvbuffer)) |
| st_printk(KERN_WARNING, STp, |
| "Can't set default drive " |
| "buffering to %d.\n", |
| STp->default_drvbuffer); |
| } |
| } |
| |
| return CHKRES_READY; |
| |
| err_out: |
| return retval; |
| } |
| |
| |
| /* Open the device. Needs to take the BKL only because of incrementing the SCSI host |
| module count. */ |
| static int st_open(struct inode *inode, struct file *filp) |
| { |
| int i, retval = (-EIO); |
| int resumed = 0; |
| struct scsi_tape *STp; |
| struct st_partstat *STps; |
| int dev = TAPE_NR(inode); |
| |
| /* |
| * We really want to do nonseekable_open(inode, filp); here, but some |
| * versions of tar incorrectly call lseek on tapes and bail out if that |
| * fails. So we disallow pread() and pwrite(), but permit lseeks. |
| */ |
| filp->f_mode &= ~(FMODE_PREAD | FMODE_PWRITE); |
| |
| if (!(STp = scsi_tape_get(dev))) { |
| return -ENXIO; |
| } |
| |
| filp->private_data = STp; |
| |
| spin_lock(&st_use_lock); |
| if (STp->in_use) { |
| spin_unlock(&st_use_lock); |
| scsi_tape_put(STp); |
| DEBC_printk(STp, "Device already in use.\n"); |
| return (-EBUSY); |
| } |
| |
| STp->in_use = 1; |
| spin_unlock(&st_use_lock); |
| STp->rew_at_close = STp->autorew_dev = (iminor(inode) & 0x80) == 0; |
| |
| if (scsi_autopm_get_device(STp->device) < 0) { |
| retval = -EIO; |
| goto err_out; |
| } |
| resumed = 1; |
| if (!scsi_block_when_processing_errors(STp->device)) { |
| retval = (-ENXIO); |
| goto err_out; |
| } |
| |
| /* See that we have at least a one page buffer available */ |
| if (!enlarge_buffer(STp->buffer, PAGE_SIZE, STp->restr_dma)) { |
| st_printk(KERN_WARNING, STp, |
| "Can't allocate one page tape buffer.\n"); |
| retval = (-EOVERFLOW); |
| goto err_out; |
| } |
| |
| (STp->buffer)->cleared = 0; |
| (STp->buffer)->writing = 0; |
| (STp->buffer)->syscall_result = 0; |
| |
| STp->write_prot = ((filp->f_flags & O_ACCMODE) == O_RDONLY); |
| |
| STp->dirty = 0; |
| for (i = 0; i < ST_NBR_PARTITIONS; i++) { |
| STps = &(STp->ps[i]); |
| STps->rw = ST_IDLE; |
| } |
| STp->try_dio_now = STp->try_dio; |
| STp->recover_count = 0; |
| DEB( STp->nbr_waits = STp->nbr_finished = 0; |
| STp->nbr_requests = STp->nbr_dio = STp->nbr_pages = 0; ) |
| |
| retval = check_tape(STp, filp); |
| if (retval < 0) |
| goto err_out; |
| if ((filp->f_flags & O_NONBLOCK) == 0 && |
| retval != CHKRES_READY) { |
| if (STp->ready == NO_TAPE) |
| retval = (-ENOMEDIUM); |
| else |
| retval = (-EIO); |
| goto err_out; |
| } |
| return 0; |
| |
| err_out: |
| normalize_buffer(STp->buffer); |
| spin_lock(&st_use_lock); |
| STp->in_use = 0; |
| spin_unlock(&st_use_lock); |
| if (resumed) |
| scsi_autopm_put_device(STp->device); |
| scsi_tape_put(STp); |
| return retval; |
| |
| } |
| |
| |
| /* Flush the tape buffer before close */ |
| static int st_flush(struct file *filp, fl_owner_t id) |
| { |
| int result = 0, result2; |
| unsigned char cmd[MAX_COMMAND_SIZE]; |
| struct st_request *SRpnt; |
| struct scsi_tape *STp = filp->private_data; |
| struct st_modedef *STm = &(STp->modes[STp->current_mode]); |
| struct st_partstat *STps = &(STp->ps[STp->partition]); |
| |
| if (file_count(filp) > 1) |
| return 0; |
| |
| if (STps->rw == ST_WRITING && !STp->pos_unknown) { |
| result = st_flush_write_buffer(STp); |
| if (result != 0 && result != (-ENOSPC)) |
| goto out; |
| } |
| |
| if (STp->can_partitions && |
| (result2 = switch_partition(STp)) < 0) { |
| DEBC_printk(STp, "switch_partition at close failed.\n"); |
| if (result == 0) |
| result = result2; |
| goto out; |
| } |
| |
| DEBC( if (STp->nbr_requests) |
| st_printk(KERN_DEBUG, STp, |
| "Number of r/w requests %d, dio used in %d, " |
| "pages %d.\n", STp->nbr_requests, STp->nbr_dio, |
| STp->nbr_pages)); |
| |
| if (STps->rw == ST_WRITING && !STp->pos_unknown) { |
| struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat; |
| |
| #if DEBUG |
| DEBC_printk(STp, "Async write waits %d, finished %d.\n", |
| STp->nbr_waits, STp->nbr_finished); |
| #endif |
| memset(cmd, 0, MAX_COMMAND_SIZE); |
| cmd[0] = WRITE_FILEMARKS; |
| if (STp->immediate_filemark) |
| cmd[1] = 1; |
| cmd[4] = 1 + STp->two_fm; |
| |
| SRpnt = st_do_scsi(NULL, STp, cmd, 0, DMA_NONE, |
| STp->device->request_queue->rq_timeout, |
| MAX_WRITE_RETRIES, 1); |
| if (!SRpnt) { |
| result = (STp->buffer)->syscall_result; |
| goto out; |
| } |
| |
| if (STp->buffer->syscall_result == 0 || |
| (cmdstatp->have_sense && !cmdstatp->deferred && |
| (cmdstatp->flags & SENSE_EOM) && |
| (cmdstatp->sense_hdr.sense_key == NO_SENSE || |
| cmdstatp->sense_hdr.sense_key == RECOVERED_ERROR) && |
| (!cmdstatp->remainder_valid || cmdstatp->uremainder64 == 0))) { |
| /* Write successful at EOM */ |
| st_release_request(SRpnt); |
| SRpnt = NULL; |
| if (STps->drv_file >= 0) |
| STps->drv_file++; |
| STps->drv_block = 0; |
| if (STp->two_fm) |
| cross_eof(STp, 0); |
| STps->eof = ST_FM; |
| } |
| else { /* Write error */ |
| st_release_request(SRpnt); |
| SRpnt = NULL; |
| st_printk(KERN_ERR, STp, |
| "Error on write filemark.\n"); |
| if (result == 0) |
| result = (-EIO); |
| } |
| |
| DEBC_printk(STp, "Buffer flushed, %d EOF(s) written\n", cmd[4]); |
| } else if (!STp->rew_at_close) { |
| STps = &(STp->ps[STp->partition]); |
| if (!STm->sysv || STps->rw != ST_READING) { |
| if (STp->can_bsr) |
| result = flush_buffer(STp, 0); |
| else if (STps->eof == ST_FM_HIT) { |
| result = cross_eof(STp, 0); |
| if (result) { |
| if (STps->drv_file >= 0) |
| STps->drv_file++; |
| STps->drv_block = 0; |
| STps->eof = ST_FM; |
| } else |
| STps->eof = ST_NOEOF; |
| } |
| } else if ((STps->eof == ST_NOEOF && |
| !(result = cross_eof(STp, 1))) || |
| STps->eof == ST_FM_HIT) { |
| if (STps->drv_file >= 0) |
| STps->drv_file++; |
| STps->drv_block = 0; |
| STps->eof = ST_FM; |
| } |
| } |
| |
| out: |
| if (STp->rew_at_close) { |
| result2 = st_int_ioctl(STp, MTREW, 1); |
| if (result == 0) |
| result = result2; |
| } |
| return result; |
| } |
| |
| |
| /* Close the device and release it. BKL is not needed: this is the only thread |
| accessing this tape. */ |
| static int st_release(struct inode *inode, struct file *filp) |
| { |
| int result = 0; |
| struct scsi_tape *STp = filp->private_data; |
| |
| if (STp->door_locked == ST_LOCKED_AUTO) |
| do_door_lock(STp, 0); |
| |
| normalize_buffer(STp->buffer); |
| spin_lock(&st_use_lock); |
| STp->in_use = 0; |
| spin_unlock(&st_use_lock); |
| scsi_autopm_put_device(STp->device); |
| scsi_tape_put(STp); |
| |
| return result; |
| } |
| |
| /* The checks common to both reading and writing */ |
| static ssize_t rw_checks(struct scsi_tape *STp, struct file *filp, size_t count) |
| { |
| ssize_t retval = 0; |
| |
| /* |
| * If we are in the middle of error recovery, don't let anyone |
| * else try and use this device. Also, if error recovery fails, it |
| * may try and take the device offline, in which case all further |
| * access to the device is prohibited. |
| */ |
| if (!scsi_block_when_processing_errors(STp->device)) { |
| retval = (-ENXIO); |
| goto out; |
| } |
| |
| if (STp->ready != ST_READY) { |
| if (STp->ready == ST_NO_TAPE) |
| retval = (-ENOMEDIUM); |
| else |
| retval = (-EIO); |
| goto out; |
| } |
| |
| if (! STp->modes[STp->current_mode].defined) { |
| retval = (-ENXIO); |
| goto out; |
| } |
| |
| |
| /* |
| * If there was a bus reset, block further access |
| * to this device. |
| */ |
| if (STp->pos_unknown) { |
| retval = (-EIO); |
| goto out; |
| } |
| |
| if (count == 0) |
| goto out; |
| |
| DEB( |
| if (!STp->in_use) { |
| st_printk(ST_DEB_MSG, STp, |
| "Incorrect device.\n"); |
| retval = (-EIO); |
| goto out; |
| } ) /* end DEB */ |
| |
| if (STp->can_partitions && |
| (retval = switch_partition(STp)) < 0) |
| goto out; |
| |
| if (STp->block_size == 0 && STp->max_block > 0 && |
| (count < STp->min_block || count > STp->max_block)) { |
| retval = (-EINVAL); |
| goto out; |
| } |
| |
| if (STp->do_auto_lock && STp->door_locked == ST_UNLOCKED && |
| !do_door_lock(STp, 1)) |
| STp->door_locked = ST_LOCKED_AUTO; |
| |
| out: |
| return retval; |
| } |
| |
| |
| static int setup_buffering(struct scsi_tape *STp, const char __user *buf, |
| size_t count, int is_read) |
| { |
| int i, bufsize, retval = 0; |
| struct st_buffer *STbp = STp->buffer; |
| |
| if (is_read) |
| i = STp->try_dio_now && try_rdio; |
| else |
| i = STp->try_dio_now && try_wdio; |
| |
| if (i && ((unsigned long)buf & queue_dma_alignment( |
| STp->device->request_queue)) == 0) { |
| i = sgl_map_user_pages(STbp, STbp->use_sg, (unsigned long)buf, |
| count, (is_read ? READ : WRITE)); |
| if (i > 0) { |
| STbp->do_dio = i; |
| STbp->buffer_bytes = 0; /* can be used as transfer counter */ |
| } |
| else |
| STbp->do_dio = 0; /* fall back to buffering with any error */ |
| STbp->sg_segs = STbp->do_dio; |
| DEB( |
| if (STbp->do_dio) { |
| STp->nbr_dio++; |
| STp->nbr_pages += STbp->do_dio; |
| } |
| ) |
| } else |
| STbp->do_dio = 0; |
| DEB( STp->nbr_requests++; ) |
| |
| if (!STbp->do_dio) { |
| if (STp->block_size) |
| bufsize = STp->block_size > st_fixed_buffer_size ? |
| STp->block_size : st_fixed_buffer_size; |
| else { |
| bufsize = count; |
| /* Make sure that data from previous user is not leaked even if |
| HBA does not return correct residual */ |
| if (is_read && STp->sili && !STbp->cleared) |
| clear_buffer(STbp); |
| } |
| |
| if (bufsize > STbp->buffer_size && |
| !enlarge_buffer(STbp, bufsize, STp->restr_dma)) { |
| st_printk(KERN_WARNING, STp, |
| "Can't allocate %d byte tape buffer.\n", |
| bufsize); |
| retval = (-EOVERFLOW); |
| goto out; |
| } |
| if (STp->block_size) |
| STbp->buffer_blocks = bufsize / STp->block_size; |
| } |
| |
| out: |
| return retval; |
| } |
| |
| |
| /* Can be called more than once after each setup_buffer() */ |
| static void release_buffering(struct scsi_tape *STp, int is_read) |
| { |
| struct st_buffer *STbp; |
| |
| STbp = STp->buffer; |
| if (STbp->do_dio) { |
| sgl_unmap_user_pages(STbp, STbp->do_dio, is_read); |
| STbp->do_dio = 0; |
| STbp->sg_segs = 0; |
| } |
| } |
| |
| |
| /* Write command */ |
| static ssize_t |
| st_write(struct file *filp, const char __user *buf, size_t count, loff_t * ppos) |
| { |
| ssize_t total; |
| ssize_t i, do_count, blks, transfer; |
| ssize_t retval; |
| int undone, retry_eot = 0, scode; |
| int async_write; |
| unsigned char cmd[MAX_COMMAND_SIZE]; |
| const char __user *b_point; |
| struct st_request *SRpnt = NULL; |
| struct scsi_tape *STp = filp->private_data; |
| struct st_modedef *STm; |
| struct st_partstat *STps; |
| struct st_buffer *STbp; |
| |
| if (mutex_lock_interruptible(&STp->lock)) |
| return -ERESTARTSYS; |
| |
| retval = rw_checks(STp, filp, count); |
| if (retval || count == 0) |
| goto out; |
| |
| /* Write must be integral number of blocks */ |
| if (STp->block_size != 0 && (count % STp->block_size) != 0) { |
| st_printk(KERN_WARNING, STp, |
| "Write not multiple of tape block size.\n"); |
| retval = (-EINVAL); |
| goto out; |
| } |
| |
| STm = &(STp->modes[STp->current_mode]); |
| STps = &(STp->ps[STp->partition]); |
| |
| if (STp->write_prot) { |
| retval = (-EACCES); |
| goto out; |
| } |
| |
| |
| if (STps->rw == ST_READING) { |
| retval = flush_buffer(STp, 0); |
| if (retval) |
| goto out; |
| STps->rw = ST_WRITING; |
| } else if (STps->rw != ST_WRITING && |
| STps->drv_file == 0 && STps->drv_block == 0) { |
| if ((retval = set_mode_densblk(STp, STm)) < 0) |
| goto out; |
| if (STm->default_compression != ST_DONT_TOUCH && |
| !(STp->compression_changed)) { |
| if (st_compression(STp, (STm->default_compression == ST_YES))) { |
| st_printk(KERN_WARNING, STp, |
| "Can't set default compression.\n"); |
| if (modes_defined) { |
| retval = (-EINVAL); |
| goto out; |
| } |
| } |
| } |
| } |
| |
| STbp = STp->buffer; |
| i = write_behind_check(STp); |
| if (i) { |
| if (i == -ENOSPC) |
| STps->eof = ST_EOM_OK; |
| else |
| STps->eof = ST_EOM_ERROR; |
| } |
| |
| if (STps->eof == ST_EOM_OK) { |
| STps->eof = ST_EOD_1; /* allow next write */ |
| retval = (-ENOSPC); |
| goto out; |
| } |
| else if (STps->eof == ST_EOM_ERROR) { |
| retval = (-EIO); |
| goto out; |
| } |
| |
| /* Check the buffer readability in cases where copy_user might catch |
| the problems after some tape movement. */ |
| if (STp->block_size != 0 && |
| !STbp->do_dio && |
| (copy_from_user(&i, buf, 1) != 0 || |
| copy_from_user(&i, buf + count - 1, 1) != 0)) { |
| retval = (-EFAULT); |
| goto out; |
| } |
| |
| retval = setup_buffering(STp, buf, count, 0); |
| if (retval) |
| goto out; |
| |
| total = count; |
| |
| memset(cmd, 0, MAX_COMMAND_SIZE); |
| cmd[0] = WRITE_6; |
| cmd[1] = (STp->block_size != 0); |
| |
| STps->rw = ST_WRITING; |
| |
| b_point = buf; |
| while (count > 0 && !retry_eot) { |
| |
| if (STbp->do_dio) { |
| do_count = count; |
| } |
| else { |
| if (STp->block_size == 0) |
| do_count = count; |
| else { |
| do_count = STbp->buffer_blocks * STp->block_size - |
| STbp->buffer_bytes; |
| if (do_count > count) |
| do_count = count; |
| } |
| |
| i = append_to_buffer(b_point, STbp, do_count); |
| if (i) { |
| retval = i; |
| goto out; |
| } |
| } |
| count -= do_count; |
| b_point += do_count; |
| |
| async_write = STp->block_size == 0 && !STbp->do_dio && |
| STm->do_async_writes && STps->eof < ST_EOM_OK; |
| |
| if (STp->block_size != 0 && STm->do_buffer_writes && |
| !(STp->try_dio_now && try_wdio) && STps->eof < ST_EOM_OK && |
| STbp->buffer_bytes < STbp->buffer_size) { |
| STp->dirty = 1; |
| /* Don't write a buffer that is not full enough. */ |
| if (!async_write && count == 0) |
| break; |
| } |
| |
| retry_write: |
| if (STp->block_size == 0) |
| blks = transfer = do_count; |
| else { |
| if (!STbp->do_dio) |
| blks = STbp->buffer_bytes; |
| else |
| blks = do_count; |
| blks /= STp->block_size; |
| transfer = blks * STp->block_size; |
| } |
| cmd[2] = blks >> 16; |
| cmd[3] = blks >> 8; |
| cmd[4] = blks; |
| |
| SRpnt = st_do_scsi(SRpnt, STp, cmd, transfer, DMA_TO_DEVICE, |
| STp->device->request_queue->rq_timeout, |
| MAX_WRITE_RETRIES, !async_write); |
| if (!SRpnt) { |
| retval = STbp->syscall_result; |
| goto out; |
| } |
| if (async_write && !STbp->syscall_result) { |
| STbp->writing = transfer; |
| STp->dirty = !(STbp->writing == |
| STbp->buffer_bytes); |
| SRpnt = NULL; /* Prevent releasing this request! */ |
| DEB( STp->write_pending = 1; ) |
| break; |
| } |
| |
| if (STbp->syscall_result != 0) { |
| struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat; |
| |
| DEBC_printk(STp, "Error on write:\n"); |
| if (cmdstatp->have_sense && (cmdstatp->flags & SENSE_EOM)) { |
| scode = cmdstatp->sense_hdr.sense_key; |
| if (cmdstatp->remainder_valid) |
| undone = (int)cmdstatp->uremainder64; |
| else if (STp->block_size == 0 && |
| scode == VOLUME_OVERFLOW) |
| undone = transfer; |
| else |
| undone = 0; |
| if (STp->block_size != 0) |
| undone *= STp->block_size; |
| if (undone <= do_count) { |
| /* Only data from this write is not written */ |
| count += undone; |
| b_point -= undone; |
| do_count -= undone; |
| if (STp->block_size) |
| blks = (transfer - undone) / STp->block_size; |
| STps->eof = ST_EOM_OK; |
| /* Continue in fixed block mode if all written |
| in this request but still something left to write |
| (retval left to zero) |
| */ |
| if (STp->block_size == 0 || |
| undone > 0 || count == 0) |
| retval = (-ENOSPC); /* EOM within current request */ |
| DEBC_printk(STp, "EOM with %d " |
| "bytes unwritten.\n", |
| (int)count); |
| } else { |
| /* EOT within data buffered earlier (possible only |
| in fixed block mode without direct i/o) */ |
| if (!retry_eot && !cmdstatp->deferred && |
| (scode == NO_SENSE || scode == RECOVERED_ERROR)) { |
| move_buffer_data(STp->buffer, transfer - undone); |
| retry_eot = 1; |
| if (STps->drv_block >= 0) { |
| STps->drv_block += (transfer - undone) / |
| STp->block_size; |
| } |
| STps->eof = ST_EOM_OK; |
| DEBC_printk(STp, "Retry " |
| "write of %d " |
| "bytes at EOM.\n", |
| STp->buffer->buffer_bytes); |
| goto retry_write; |
| } |
| else { |
| /* Either error within data buffered by driver or |
| failed retry */ |
| count -= do_count; |
| blks = do_count = 0; |
| STps->eof = ST_EOM_ERROR; |
| STps->drv_block = (-1); /* Too cautious? */ |
| retval = (-EIO); /* EOM for old data */ |
| DEBC_printk(STp, "EOM with " |
| "lost data.\n"); |
| } |
| } |
| } else { |
| count += do_count; |
| STps->drv_block = (-1); /* Too cautious? */ |
| retval = STbp->syscall_result; |
| } |
| |
| } |
| |
| if (STps->drv_block >= 0) { |
| if (STp->block_size == 0) |
| STps->drv_block += (do_count > 0); |
| else |
| STps->drv_block += blks; |
| } |
| |
| STbp->buffer_bytes = 0; |
| STp->dirty = 0; |
| |
| if (retval || retry_eot) { |
| if (count < total) |
| retval = total - count; |
| goto out; |
| } |
| } |
| |
| if (STps->eof == ST_EOD_1) |
| STps->eof = ST_EOM_OK; |
| else if (STps->eof != ST_EOM_OK) |
| STps->eof = ST_NOEOF; |
| retval = total - count; |
| |
| out: |
| if (SRpnt != NULL) |
| st_release_request(SRpnt); |
| release_buffering(STp, 0); |
| mutex_unlock(&STp->lock); |
| |
| return retval; |
| } |
| |
| /* Read data from the tape. Returns zero in the normal case, one if the |
| eof status has changed, and the negative error code in case of a |
| fatal error. Otherwise updates the buffer and the eof state. |
| |
| Does release user buffer mapping if it is set. |
| */ |
| static long read_tape(struct scsi_tape *STp, long count, |
| struct st_request ** aSRpnt) |
| { |
| int transfer, blks, bytes; |
| unsigned char cmd[MAX_COMMAND_SIZE]; |
| struct st_request *SRpnt; |
| struct st_modedef *STm; |
| struct st_partstat *STps; |
| struct st_buffer *STbp; |
| int retval = 0; |
| |
| if (count == 0) |
| return 0; |
| |
| STm = &(STp->modes[STp->current_mode]); |
| STps = &(STp->ps[STp->partition]); |
| if (STps->eof == ST_FM_HIT) |
| return 1; |
| STbp = STp->buffer; |
| |
| if (STp->block_size == 0) |
| blks = bytes = count; |
| else { |
| if (!(STp->try_dio_now && try_rdio) && STm->do_read_ahead) { |
| blks = (STp->buffer)->buffer_blocks; |
| bytes = blks * STp->block_size; |
| } else { |
| bytes = count; |
| if (!STbp->do_dio && bytes > (STp->buffer)->buffer_size) |
| bytes = (STp->buffer)->buffer_size; |
| blks = bytes / STp->block_size; |
| bytes = blks * STp->block_size; |
| } |
| } |
| |
| memset(cmd, 0, MAX_COMMAND_SIZE); |
| cmd[0] = READ_6; |
| cmd[1] = (STp->block_size != 0); |
| if (!cmd[1] && STp->sili) |
| cmd[1] |= 2; |
| cmd[2] = blks >> 16; |
| cmd[3] = blks >> 8; |
| cmd[4] = blks; |
| |
| SRpnt = *aSRpnt; |
| SRpnt = st_do_scsi(SRpnt, STp, cmd, bytes, DMA_FROM_DEVICE, |
| STp->device->request_queue->rq_timeout, |
| MAX_RETRIES, 1); |
| release_buffering(STp, 1); |
| *aSRpnt = SRpnt; |
| if (!SRpnt) |
| return STbp->syscall_result; |
| |
| STbp->read_pointer = 0; |
| STps->at_sm = 0; |
| |
| /* Something to check */ |
| if (STbp->syscall_result) { |
| struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat; |
| |
| retval = 1; |
| DEBC_printk(STp, |
| "Sense: %2x %2x %2x %2x %2x %2x %2x %2x\n", |
| SRpnt->sense[0], SRpnt->sense[1], |
| SRpnt->sense[2], SRpnt->sense[3], |
| SRpnt->sense[4], SRpnt->sense[5], |
| SRpnt->sense[6], SRpnt->sense[7]); |
| if (cmdstatp->have_sense) { |
| |
| if (cmdstatp->sense_hdr.sense_key == BLANK_CHECK) |
| cmdstatp->flags &= 0xcf; /* No need for EOM in this case */ |
| |
| if (cmdstatp->flags != 0) { /* EOF, EOM, or ILI */ |
| /* Compute the residual count */ |
| if (cmdstatp->remainder_valid) |
| transfer = (int)cmdstatp->uremainder64; |
| else |
| transfer = 0; |
| if (cmdstatp->sense_hdr.sense_key == MEDIUM_ERROR) { |
| if (STp->block_size == 0) |
| transfer = bytes; |
| /* Some drives set ILI with MEDIUM ERROR */ |
| cmdstatp->flags &= ~SENSE_ILI; |
| } |
| |
| if (cmdstatp->flags & SENSE_ILI) { /* ILI */ |
| if (STp->block_size == 0 && |
| transfer < 0) { |
| st_printk(KERN_NOTICE, STp, |
| "Failed to read %d " |
| "byte block with %d " |
| "byte transfer.\n", |
| bytes - transfer, |
| bytes); |
| if (STps->drv_block >= 0) |
| STps->drv_block += 1; |
| STbp->buffer_bytes = 0; |
| return (-ENOMEM); |
| } else if (STp->block_size == 0) { |
| STbp->buffer_bytes = bytes - transfer; |
| } else { |
| st_release_request(SRpnt); |
| SRpnt = *aSRpnt = NULL; |
| if (transfer == blks) { /* We did not get anything, error */ |
| st_printk(KERN_NOTICE, STp, |
| "Incorrect " |
| "block size.\n"); |
| if (STps->drv_block >= 0) |
| STps->drv_block += blks - transfer + 1; |
| st_int_ioctl(STp, MTBSR, 1); |
| return (-EIO); |
| } |
| /* We have some data, deliver it */ |
| STbp->buffer_bytes = (blks - transfer) * |
| STp->block_size; |
| DEBC_printk(STp, "ILI but " |
| "enough data " |
| "received %ld " |
| "%d.\n", count, |
| STbp->buffer_bytes); |
| if (STps->drv_block >= 0) |
| STps->drv_block += 1; |
| if (st_int_ioctl(STp, MTBSR, 1)) |
| return (-EIO); |
| } |
| } else if (cmdstatp->flags & SENSE_FMK) { /* FM overrides EOM */ |
| if (STps->eof != ST_FM_HIT) |
| STps->eof = ST_FM_HIT; |
| else |
| STps->eof = ST_EOD_2; |
| if (STp->block_size == 0) |
| STbp->buffer_bytes = 0; |
| else |
| STbp->buffer_bytes = |
| bytes - transfer * STp->block_size; |
| DEBC_printk(STp, "EOF detected (%d " |
| "bytes read).\n", |
| STbp->buffer_bytes); |
| } else if (cmdstatp->flags & SENSE_EOM) { |
| if (STps->eof == ST_FM) |
| STps->eof = ST_EOD_1; |
| else |
| STps->eof = ST_EOM_OK; |
| if (STp->block_size == 0) |
| STbp->buffer_bytes = bytes - transfer; |
| else |
| STbp->buffer_bytes = |
| bytes - transfer * STp->block_size; |
| |
| DEBC_printk(STp, "EOM detected (%d " |
| "bytes read).\n", |
| STbp->buffer_bytes); |
| } |
| } |
| /* end of EOF, EOM, ILI test */ |
| else { /* nonzero sense key */ |
| DEBC_printk(STp, "Tape error while reading.\n"); |
| STps->drv_block = (-1); |
| if (STps->eof == ST_FM && |
| cmdstatp->sense_hdr.sense_key == BLANK_CHECK) { |
| DEBC_printk(STp, "Zero returned for " |
| "first BLANK CHECK " |
| "after EOF.\n"); |
| STps->eof = ST_EOD_2; /* First BLANK_CHECK after FM */ |
| } else /* Some other extended sense code */ |
| retval = (-EIO); |
| } |
| |
| if (STbp->buffer_bytes < 0) /* Caused by bogus sense data */ |
| STbp->buffer_bytes = 0; |
| } |
| /* End of extended sense test */ |
| else { /* Non-extended sense */ |
| retval = STbp->syscall_result; |
| } |
| |
| } |
| /* End of error handling */ |
| else { /* Read successful */ |
| STbp->buffer_bytes = bytes; |
| if (STp->sili) /* In fixed block mode residual is always zero here */ |
| STbp->buffer_bytes -= STp->buffer->cmdstat.residual; |
| } |
| |
| if (STps->drv_block >= 0) { |
| if (STp->block_size == 0) |
| STps->drv_block++; |
| else |
| STps->drv_block += STbp->buffer_bytes / STp->block_size; |
| } |
| return retval; |
| } |
| |
| |
| /* Read command */ |
| static ssize_t |
| st_read(struct file *filp, char __user *buf, size_t count, loff_t * ppos) |
| { |
| ssize_t total; |
| ssize_t retval = 0; |
| ssize_t i, transfer; |
| int special, do_dio = 0; |
| struct st_request *SRpnt = NULL; |
| struct scsi_tape *STp = filp->private_data; |
| struct st_modedef *STm; |
| struct st_partstat *STps; |
| struct st_buffer *STbp = STp->buffer; |
| |
| if (mutex_lock_interruptible(&STp->lock)) |
| return -ERESTARTSYS; |
| |
| retval = rw_checks(STp, filp, count); |
| if (retval || count == 0) |
| goto out; |
| |
| STm = &(STp->modes[STp->current_mode]); |
| if (STp->block_size != 0 && (count % STp->block_size) != 0) { |
| if (!STm->do_read_ahead) { |
| retval = (-EINVAL); /* Read must be integral number of blocks */ |
| goto out; |
| } |
| STp->try_dio_now = 0; /* Direct i/o can't handle split blocks */ |
| } |
| |
| STps = &(STp->ps[STp->partition]); |
| if (STps->rw == ST_WRITING) { |
| retval = flush_buffer(STp, 0); |
| if (retval) |
| goto out; |
| STps->rw = ST_READING; |
| } |
| DEB( |
| if (debugging && STps->eof != ST_NOEOF) |
| st_printk(ST_DEB_MSG, STp, |
| "EOF/EOM flag up (%d). Bytes %d\n", |
| STps->eof, STbp->buffer_bytes); |
| ) /* end DEB */ |
| |
| retval = setup_buffering(STp, buf, count, 1); |
| if (retval) |
| goto out; |
| do_dio = STbp->do_dio; |
| |
| if (STbp->buffer_bytes == 0 && |
| STps->eof >= ST_EOD_1) { |
| if (STps->eof < ST_EOD) { |
| STps->eof += 1; |
| retval = 0; |
| goto out; |
| } |
| retval = (-EIO); /* EOM or Blank Check */ |
| goto out; |
| } |
| |
| if (do_dio) { |
| /* Check the buffer writability before any tape movement. Don't alter |
| buffer data. */ |
| if (copy_from_user(&i, buf, 1) != 0 || |
| copy_to_user(buf, &i, 1) != 0 || |
| copy_from_user(&i, buf + count - 1, 1) != 0 || |
| copy_to_user(buf + count - 1, &i, 1) != 0) { |
| retval = (-EFAULT); |
| goto out; |
| } |
| } |
| |
| STps->rw = ST_READING; |
| |
| |
| /* Loop until enough data in buffer or a special condition found */ |
| for (total = 0, special = 0; total < count && !special;) { |
| |
| /* Get new data if the buffer is empty */ |
| if (STbp->buffer_bytes == 0) { |
| special = read_tape(STp, count - total, &SRpnt); |
| if (special < 0) { /* No need to continue read */ |
| retval = special; |
| goto out; |
| } |
| } |
| |
| /* Move the data from driver buffer to user buffer */ |
| if (STbp->buffer_bytes > 0) { |
| DEB( |
| if (debugging && STps->eof != ST_NOEOF) |
| st_printk(ST_DEB_MSG, STp, |
| "EOF up (%d). Left %d, needed %d.\n", |
| STps->eof, STbp->buffer_bytes, |
| (int)(count - total)); |
| ) /* end DEB */ |
| transfer = STbp->buffer_bytes < count - total ? |
| STbp->buffer_bytes : count - total; |
| if (!do_dio) { |
| i = from_buffer(STbp, buf, transfer); |
| if (i) { |
| retval = i; |
| goto out; |
| } |
| } |
| buf += transfer; |
| total += transfer; |
| } |
| |
| if (STp->block_size == 0) |
| break; /* Read only one variable length block */ |
| |
| } /* for (total = 0, special = 0; |
| total < count && !special; ) */ |
| |
| /* Change the eof state if no data from tape or buffer */ |
| if (total == 0) { |
| if (STps->eof == ST_FM_HIT) { |
| STps->eof = ST_FM; |
| STps->drv_block = 0; |
| if (STps->drv_file >= 0) |
| STps->drv_file++; |
| } else if (STps->eof == ST_EOD_1) { |
| STps->eof = ST_EOD_2; |
| STps->drv_block = 0; |
| if (STps->drv_file >= 0) |
| STps->drv_file++; |
| } else if (STps->eof == ST_EOD_2) |
| STps->eof = ST_EOD; |
| } else if (STps->eof == ST_FM) |
| STps->eof = ST_NOEOF; |
| retval = total; |
| |
| out: |
| if (SRpnt != NULL) { |
| st_release_request(SRpnt); |
| SRpnt = NULL; |
| } |
| if (do_dio) { |
| release_buffering(STp, 1); |
| STbp->buffer_bytes = 0; |
| } |
| mutex_unlock(&STp->lock); |
| |
| return retval; |
| } |
| |
| |
| |
| DEB( |
| /* Set the driver options */ |
| static void st_log_options(struct scsi_tape * STp, struct st_modedef * STm) |
| { |
| if (debugging) { |
| st_printk(KERN_INFO, STp, |
| "Mode %d options: buffer writes: %d, " |
| "async writes: %d, read ahead: %d\n", |
| STp->current_mode, STm->do_buffer_writes, |
| STm->do_async_writes, STm->do_read_ahead); |
| st_printk(KERN_INFO, STp, |
| " can bsr: %d, two FMs: %d, " |
| "fast mteom: %d, auto lock: %d,\n", |
| STp->can_bsr, STp->two_fm, STp->fast_mteom, |
| STp->do_auto_lock); |
| st_printk(KERN_INFO, STp, |
| " defs for wr: %d, no block limits: %d, " |
| "partitions: %d, s2 log: %d\n", |
| STm->defaults_for_writes, STp->omit_blklims, |
| STp->can_partitions, STp->scsi2_logical); |
| st_printk(KERN_INFO, STp, |
| " sysv: %d nowait: %d sili: %d " |
| "nowait_filemark: %d\n", |
| STm->sysv, STp->immediate, STp->sili, |
| STp->immediate_filemark); |
| st_printk(KERN_INFO, STp, " debugging: %d\n", debugging); |
| } |
| } |
| ) |
| |
| |
| static int st_set_options(struct scsi_tape *STp, long options) |
| { |
| int value; |
| long code; |
| struct st_modedef *STm; |
| struct cdev *cd0, *cd1; |
| struct device *d0, *d1; |
| |
| STm = &(STp->modes[STp->current_mode]); |
| if (!STm->defined) { |
| cd0 = STm->cdevs[0]; |
| cd1 = STm->cdevs[1]; |
| d0 = STm->devs[0]; |
| d1 = STm->devs[1]; |
| memcpy(STm, &(STp->modes[0]), sizeof(struct st_modedef)); |
| STm->cdevs[0] = cd0; |
| STm->cdevs[1] = cd1; |
| STm->devs[0] = d0; |
| STm->devs[1] = d1; |
| modes_defined = 1; |
| DEBC_printk(STp, "Initialized mode %d definition from mode 0\n", |
| STp->current_mode); |
| } |
| |
| code = options & MT_ST_OPTIONS; |
| if (code == MT_ST_BOOLEANS) { |
| STm->do_buffer_writes = (options & MT_ST_BUFFER_WRITES) != 0; |
| STm->do_async_writes = (options & MT_ST_ASYNC_WRITES) != 0; |
| STm->defaults_for_writes = (options & MT_ST_DEF_WRITES) != 0; |
| STm->do_read_ahead = (options & MT_ST_READ_AHEAD) != 0; |
| STp->two_fm = (options & MT_ST_TWO_FM) != 0; |
| STp->fast_mteom = (options & MT_ST_FAST_MTEOM) != 0; |
| STp->do_auto_lock = (options & MT_ST_AUTO_LOCK) != 0; |
| STp->can_bsr = (options & MT_ST_CAN_BSR) != 0; |
| STp->omit_blklims = (options & MT_ST_NO_BLKLIMS) != 0; |
| if ((STp->device)->scsi_level >= SCSI_2) |
| STp->can_partitions = (options & MT_ST_CAN_PARTITIONS) != 0; |
| STp->scsi2_logical = (options & MT_ST_SCSI2LOGICAL) != 0; |
| STp->immediate = (options & MT_ST_NOWAIT) != 0; |
| STp->immediate_filemark = (options & MT_ST_NOWAIT_EOF) != 0; |
| STm->sysv = (options & MT_ST_SYSV) != 0; |
| STp->sili = (options & MT_ST_SILI) != 0; |
| DEB( debugging = (options & MT_ST_DEBUGGING) != 0; |
| st_log_options(STp, STm); ) |
| } else if (code == MT_ST_SETBOOLEANS || code == MT_ST_CLEARBOOLEANS) { |
| value = (code == MT_ST_SETBOOLEANS); |
| if ((options & MT_ST_BUFFER_WRITES) != 0) |
| STm->do_buffer_writes = value; |
| if ((options & MT_ST_ASYNC_WRITES) != 0) |
| STm->do_async_writes = value; |
| if ((options & MT_ST_DEF_WRITES) != 0) |
| STm->defaults_for_writes = value; |
| if ((options & MT_ST_READ_AHEAD) != 0) |
| STm->do_read_ahead = value; |
| if ((options & MT_ST_TWO_FM) != 0) |
| STp->two_fm = value; |
| if ((options & MT_ST_FAST_MTEOM) != 0) |
| STp->fast_mteom = value; |
| if ((options & MT_ST_AUTO_LOCK) != 0) |
| STp->do_auto_lock = value; |
| if ((options & MT_ST_CAN_BSR) != 0) |
| STp->can_bsr = value; |
| if ((options & MT_ST_NO_BLKLIMS) != 0) |
| STp->omit_blklims = value; |
| if ((STp->device)->scsi_level >= SCSI_2 && |
| (options & MT_ST_CAN_PARTITIONS) != 0) |
| STp->can_partitions = value; |
| if ((options & MT_ST_SCSI2LOGICAL) != 0) |
| STp->scsi2_logical = value; |
| if ((options & MT_ST_NOWAIT) != 0) |
| STp->immediate = value; |
| if ((options & MT_ST_NOWAIT_EOF) != 0) |
| STp->immediate_filemark = value; |
| if ((options & MT_ST_SYSV) != 0) |
| STm->sysv = value; |
| if ((options & MT_ST_SILI) != 0) |
| STp->sili = value; |
| DEB( |
| if ((options & MT_ST_DEBUGGING) != 0) |
| debugging = value; |
| st_log_options(STp, STm); ) |
| } else if (code == MT_ST_WRITE_THRESHOLD) { |
| /* Retained for compatibility */ |
| } else if (code == MT_ST_DEF_BLKSIZE) { |
| value = (options & ~MT_ST_OPTIONS); |
| if (value == ~MT_ST_OPTIONS) { |
| STm->default_blksize = (-1); |
| DEBC_printk(STp, "Default block size disabled.\n"); |
| } else { |
| STm->default_blksize = value; |
| DEBC_printk(STp,"Default block size set to " |
| "%d bytes.\n", STm->default_blksize); |
| if (STp->ready == ST_READY) { |
| STp->blksize_changed = 0; |
| set_mode_densblk(STp, STm); |
| } |
| } |
| } else if (code == MT_ST_TIMEOUTS) { |
| value = (options & ~MT_ST_OPTIONS); |
| if ((value & MT_ST_SET_LONG_TIMEOUT) != 0) { |
| STp->long_timeout = (value & ~MT_ST_SET_LONG_TIMEOUT) * HZ; |
| DEBC_printk(STp, "Long timeout set to %d seconds.\n", |
| (value & ~MT_ST_SET_LONG_TIMEOUT)); |
| } else { |
| blk_queue_rq_timeout(STp->device->request_queue, |
| value * HZ); |
| DEBC_printk(STp, "Normal timeout set to %d seconds.\n", |
| value); |
| } |
| } else if (code == MT_ST_SET_CLN) { |
| value = (options & ~MT_ST_OPTIONS) & 0xff; |
| if (value != 0 && |
| (value < EXTENDED_SENSE_START || |
| value >= SCSI_SENSE_BUFFERSIZE)) |
| return (-EINVAL); |
| STp->cln_mode = value; |
| STp->cln_sense_mask = (options >> 8) & 0xff; |
| STp->cln_sense_value = (options >> 16) & 0xff; |
| st_printk(KERN_INFO, STp, |
| "Cleaning request mode %d, mask %02x, value %02x\n", |
| value, STp->cln_sense_mask, STp->cln_sense_value); |
| } else if (code == MT_ST_DEF_OPTIONS) { |
| code = (options & ~MT_ST_CLEAR_DEFAULT); |
| value = (options & MT_ST_CLEAR_DEFAULT); |
| if (code == MT_ST_DEF_DENSITY) { |
| if (value == MT_ST_CLEAR_DEFAULT) { |
| STm->default_density = (-1); |
| DEBC_printk(STp, |
| "Density default disabled.\n"); |
| } else { |
| STm->default_density = value & 0xff; |
| DEBC_printk(STp, "Density default set to %x\n", |
| STm->default_density); |
| if (STp->ready == ST_READY) { |
| STp->density_changed = 0; |
| set_mode_densblk(STp, STm); |
| } |
| } |
| } else if (code == MT_ST_DEF_DRVBUFFER) { |
| if (value == MT_ST_CLEAR_DEFAULT) { |
| STp->default_drvbuffer = 0xff; |
| DEBC_printk(STp, |
| "Drive buffer default disabled.\n"); |
| } else { |
| STp->default_drvbuffer = value & 7; |
| DEBC_printk(STp, |
| "Drive buffer default set to %x\n", |
| STp->default_drvbuffer); |
| if (STp->ready == ST_READY) |
| st_int_ioctl(STp, MTSETDRVBUFFER, STp->default_drvbuffer); |
| } |
| } else if (code == MT_ST_DEF_COMPRESSION) { |
| if (value == MT_ST_CLEAR_DEFAULT) { |
| STm->default_compression = ST_DONT_TOUCH; |
| DEBC_printk(STp, |
| "Compression default disabled.\n"); |
| } else { |
| if ((value & 0xff00) != 0) { |
| STp->c_algo = (value & 0xff00) >> 8; |
| DEBC_printk(STp, "Compression " |
| "algorithm set to 0x%x.\n", |
| STp->c_algo); |
| } |
| if ((value & 0xff) != 0xff) { |
| STm->default_compression = (value & 1 ? ST_YES : ST_NO); |
| DEBC_printk(STp, "Compression default " |
| "set to %x\n", |
| (value & 1)); |
| if (STp->ready == ST_READY) { |
| STp->compression_changed = 0; |
| st_compression(STp, (STm->default_compression == ST_YES)); |
| } |
| } |
| } |
| } |
| } else |
| return (-EIO); |
| |
| return 0; |
| } |
| |
| #define MODE_HEADER_LENGTH 4 |
| |
| /* Mode header and page byte offsets */ |
| #define MH_OFF_DATA_LENGTH 0 |
| #define MH_OFF_MEDIUM_TYPE 1 |
| #define MH_OFF_DEV_SPECIFIC 2 |
| #define MH_OFF_BDESCS_LENGTH 3 |
| #define MP_OFF_PAGE_NBR 0 |
| #define MP_OFF_PAGE_LENGTH 1 |
| |
| /* Mode header and page bit masks */ |
| #define MH_BIT_WP 0x80 |
| #define MP_MSK_PAGE_NBR 0x3f |
| |
| /* Don't return block descriptors */ |
| #define MODE_SENSE_OMIT_BDESCS 0x08 |
| |
| #define MODE_SELECT_PAGE_FORMAT 0x10 |
| |
| /* Read a mode page into the tape buffer. The block descriptors are included |
| if incl_block_descs is true. The page control is ored to the page number |
| parameter, if necessary. */ |
| static int read_mode_page(struct scsi_tape *STp, int page, int omit_block_descs) |
| { |
| unsigned char cmd[MAX_COMMAND_SIZE]; |
| struct st_request *SRpnt; |
| |
| memset(cmd, 0, MAX_COMMAND_SIZE); |
| cmd[0] = MODE_SENSE; |
| if (omit_block_descs) |
| cmd[1] = MODE_SENSE_OMIT_BDESCS; |
| cmd[2] = page; |
| cmd[4] = 255; |
| |
| SRpnt = st_do_scsi(NULL, STp, cmd, cmd[4], DMA_FROM_DEVICE, |
| STp->device->request_queue->rq_timeout, 0, 1); |
| if (SRpnt == NULL) |
| return (STp->buffer)->syscall_result; |
| |
| st_release_request(SRpnt); |
| |
| return STp->buffer->syscall_result; |
| } |
| |
| |
| /* Send the mode page in the tape buffer to the drive. Assumes that the mode data |
| in the buffer is correctly formatted. The long timeout is used if slow is non-zero. */ |
| static int write_mode_page(struct scsi_tape *STp, int page, int slow) |
| { |
| int pgo; |
| unsigned char cmd[MAX_COMMAND_SIZE]; |
| struct st_request *SRpnt; |
| int timeout; |
| |
| memset(cmd, 0, MAX_COMMAND_SIZE); |
| cmd[0] = MODE_SELECT; |
| cmd[1] = MODE_SELECT_PAGE_FORMAT; |
| pgo = MODE_HEADER_LENGTH + (STp->buffer)->b_data[MH_OFF_BDESCS_LENGTH]; |
| cmd[4] = pgo + (STp->buffer)->b_data[pgo + MP_OFF_PAGE_LENGTH] + 2; |
| |
| /* Clear reserved fields */ |
| (STp->buffer)->b_data[MH_OFF_DATA_LENGTH] = 0; |
| (STp->buffer)->b_data[MH_OFF_MEDIUM_TYPE] = 0; |
| (STp->buffer)->b_data[MH_OFF_DEV_SPECIFIC] &= ~MH_BIT_WP; |
| (STp->buffer)->b_data[pgo + MP_OFF_PAGE_NBR] &= MP_MSK_PAGE_NBR; |
| |
| timeout = slow ? |
| STp->long_timeout : STp->device->request_queue->rq_timeout; |
| SRpnt = st_do_scsi(NULL, STp, cmd, cmd[4], DMA_TO_DEVICE, |
| timeout, 0, 1); |
| if (SRpnt == NULL) |
| return (STp->buffer)->syscall_result; |
| |
| st_release_request(SRpnt); |
| |
| return STp->buffer->syscall_result; |
| } |
| |
| |
| #define COMPRESSION_PAGE 0x0f |
| #define COMPRESSION_PAGE_LENGTH 16 |
| |
| #define CP_OFF_DCE_DCC 2 |
| #define CP_OFF_C_ALGO 7 |
| |
| #define DCE_MASK 0x80 |
| #define DCC_MASK 0x40 |
| #define RED_MASK 0x60 |
| |
| |
| /* Control the compression with mode page 15. Algorithm not changed if zero. |
| |
| The block descriptors are read and written because Sony SDT-7000 does not |
| work without this (suggestion from Michael Schaefer <Michael.Schaefer@dlr.de>). |
| Including block descriptors should not cause any harm to other drives. */ |
| |
| static int st_compression(struct scsi_tape * STp, int state) |
| { |
| int retval; |
| int mpoffs; /* Offset to mode page start */ |
| unsigned char *b_data = (STp->buffer)->b_data; |
| |
| if (STp->ready != ST_READY) |
| return (-EIO); |
| |
| /* Read the current page contents */ |
| retval = read_mode_page(STp, COMPRESSION_PAGE, 0); |
| if (retval) { |
| DEBC_printk(STp, "Compression mode page not supported.\n"); |
| return (-EIO); |
| } |
| |
| mpoffs = MODE_HEADER_LENGTH + b_data[MH_OFF_BDESCS_LENGTH]; |
| DEBC_printk(STp, "Compression state is %d.\n", |
| (b_data[mpoffs + CP_OFF_DCE_DCC] & DCE_MASK ? 1 : 0)); |
| |
| /* Check if compression can be changed */ |
| if ((b_data[mpoffs + CP_OFF_DCE_DCC] & DCC_MASK) == 0) { |
| DEBC_printk(STp, "Compression not supported.\n"); |
| return (-EIO); |
| } |
| |
| /* Do the change */ |
| if (state) { |
| b_data[mpoffs + CP_OFF_DCE_DCC] |= DCE_MASK; |
| if (STp->c_algo != 0) |
| b_data[mpoffs + CP_OFF_C_ALGO] = STp->c_algo; |
| } |
| else { |
| b_data[mpoffs + CP_OFF_DCE_DCC] &= ~DCE_MASK; |
| if (STp->c_algo != 0) |
| b_data[mpoffs + CP_OFF_C_ALGO] = 0; /* no compression */ |
| } |
| |
| retval = write_mode_page(STp, COMPRESSION_PAGE, 0); |
| if (retval) { |
| DEBC_printk(STp, "Compression change failed.\n"); |
| return (-EIO); |
| } |
| DEBC_printk(STp, "Compression state changed to %d.\n", state); |
| |
| STp->compression_changed = 1; |
| return 0; |
| } |
| |
| |
| /* Process the load and unload commands (does unload if the load code is zero) */ |
| static int do_load_unload(struct scsi_tape *STp, struct file *filp, int load_code) |
| { |
| int retval = (-EIO), timeout; |
| unsigned char cmd[MAX_COMMAND_SIZE]; |
| struct st_partstat *STps; |
| struct st_request *SRpnt; |
| |
| if (STp->ready != ST_READY && !load_code) { |
| if (STp->ready == ST_NO_TAPE) |
| return (-ENOMEDIUM); |
| else |
| return (-EIO); |
| } |
| |
| memset(cmd, 0, MAX_COMMAND_SIZE); |
| cmd[0] = START_STOP; |
| if (load_code) |
| cmd[4] |= 1; |
| /* |
| * If arg >= 1 && arg <= 6 Enhanced load/unload in HP C1553A |
| */ |
| if (load_code >= 1 + MT_ST_HPLOADER_OFFSET |
| && load_code <= 6 + MT_ST_HPLOADER_OFFSET) { |
| DEBC_printk(STp, " Enhanced %sload slot %2d.\n", |
| (cmd[4]) ? "" : "un", |
| load_code - MT_ST_HPLOADER_OFFSET); |
| cmd[3] = load_code - MT_ST_HPLOADER_OFFSET; /* MediaID field of C1553A */ |
| } |
| if (STp->immediate) { |
| cmd[1] = 1; /* Don't wait for completion */ |
| timeout = STp->device->request_queue->rq_timeout; |
| } |
| else |
| timeout = STp->long_timeout; |
| |
| DEBC( |
| if (!load_code) |
| st_printk(ST_DEB_MSG, STp, "Unloading tape.\n"); |
| else |
| st_printk(ST_DEB_MSG, STp, "Loading tape.\n"); |
| ); |
| |
| SRpnt = st_do_scsi(NULL, STp, cmd, 0, DMA_NONE, |
| timeout, MAX_RETRIES, 1); |
| if (!SRpnt) |
| return (STp->buffer)->syscall_result; |
| |
| retval = (STp->buffer)->syscall_result; |
| st_release_request(SRpnt); |
| |
| if (!retval) { /* SCSI command successful */ |
| |
| if (!load_code) { |
| STp->rew_at_close = 0; |
| STp->ready = ST_NO_TAPE; |
| } |
| else { |
| STp->rew_at_close = STp->autorew_dev; |
| retval = check_tape(STp, filp); |
| if (retval > 0) |
| retval = 0; |
| } |
| } |
| else { |
| STps = &(STp->ps[STp->partition]); |
| STps->drv_file = STps->drv_block = (-1); |
| } |
| |
| return retval; |
| } |
| |
| #if DEBUG |
| #define ST_DEB_FORWARD 0 |
| #define ST_DEB_BACKWARD 1 |
| static void deb_space_print(struct scsi_tape *STp, int direction, char *units, unsigned char *cmd) |
| { |
| s32 sc; |
| |
| if (!debugging) |
| return; |
| |
| sc = cmd[2] & 0x80 ? 0xff000000 : 0; |
| sc |= (cmd[2] << 16) | (cmd[3] << 8) | cmd[4]; |
| if (direction) |
| sc = -sc; |
| st_printk(ST_DEB_MSG, STp, "Spacing tape %s over %d %s.\n", |
| direction ? "backward" : "forward", sc, units); |
| } |
| #else |
| #define ST_DEB_FORWARD 0 |
| #define ST_DEB_BACKWARD 1 |
| static void deb_space_print(struct scsi_tape *STp, int direction, char *units, unsigned char *cmd) {} |
| #endif |
| |
| |
| /* Internal ioctl function */ |
| static int st_int_ioctl(struct scsi_tape *STp, unsigned int cmd_in, unsigned long arg) |
| { |
| int timeout; |
| long ltmp; |
| int ioctl_result; |
| int chg_eof = 1; |
| unsigned char cmd[MAX_COMMAND_SIZE]; |
| struct st_request *SRpnt; |
| struct st_partstat *STps; |
| int fileno, blkno, at_sm, undone; |
| int datalen = 0, direction = DMA_NONE; |
| |
| WARN_ON(STp->buffer->do_dio != 0); |
| if (STp->ready != ST_READY) { |
| if (STp->ready == ST_NO_TAPE) |
| return (-ENOMEDIUM); |
| else |
| return (-EIO); |
| } |
| timeout = STp->long_timeout; |
| STps = &(STp->ps[STp->partition]); |
| fileno = STps->drv_file; |
| blkno = STps->drv_block; |
| at_sm = STps->at_sm; |
| |
| memset(cmd, 0, MAX_COMMAND_SIZE); |
| switch (cmd_in) { |
| case MTFSFM: |
| chg_eof = 0; /* Changed from the FSF after this */ |
| case MTFSF: |
| cmd[0] = SPACE; |
| cmd[1] = 0x01; /* Space FileMarks */ |
| cmd[2] = (arg >> 16); |
| cmd[3] = (arg >> 8); |
| cmd[4] = arg; |
| deb_space_print(STp, ST_DEB_FORWARD, "filemarks", cmd); |
| if (fileno >= 0) |
| fileno += arg; |
| blkno = 0; |
| at_sm &= (arg == 0); |
| break; |
| case MTBSFM: |
| chg_eof = 0; /* Changed from the FSF after this */ |
| case MTBSF: |
| cmd[0] = SPACE; |
| cmd[1] = 0x01; /* Space FileMarks */ |
| ltmp = (-arg); |
| cmd[2] = (ltmp >> 16); |
| cmd[3] = (ltmp >> 8); |
| cmd[4] = ltmp; |
| deb_space_print(STp, ST_DEB_BACKWARD, "filemarks", cmd); |
| if (fileno >= 0) |
| fileno -= arg; |
| blkno = (-1); /* We can't know the block number */ |
| at_sm &= (arg == 0); |
| break; |
| case MTFSR: |
| cmd[0] = SPACE; |
| cmd[1] = 0x00; /* Space Blocks */ |
| cmd[2] = (arg >> 16); |
| cmd[3] = (arg >> 8); |
| cmd[4] = arg; |
| deb_space_print(STp, ST_DEB_FORWARD, "blocks", cmd); |
| if (blkno >= 0) |
| blkno += arg; |
| at_sm &= (arg == 0); |
| break; |
| case MTBSR: |
| cmd[0] = SPACE; |
| cmd[1] = 0x00; /* Space Blocks */ |
| ltmp = (-arg); |
| cmd[2] = (ltmp >> 16); |
| cmd[3] = (ltmp >> 8); |
| cmd[4] = ltmp; |
| deb_space_print(STp, ST_DEB_BACKWARD, "blocks", cmd); |
| if (blkno >= 0) |
| blkno -= arg; |
| at_sm &= (arg == 0); |
| break; |
| case MTFSS: |
| cmd[0] = SPACE; |
| cmd[1] = 0x04; /* Space Setmarks */ |
| cmd[2] = (arg >> 16); |
| cmd[3] = (arg >> 8); |
| cmd[4] = arg; |
| deb_space_print(STp, ST_DEB_FORWARD, "setmarks", cmd); |
| if (arg != 0) { |
| blkno = fileno = (-1); |
| at_sm = 1; |
| } |
| break; |
| |