| config USB_DWC3 | |
| tristate "DesignWare USB3 DRD Core Support" | |
| depends on (USB || USB_GADGET) && HAS_DMA | |
| select USB_XHCI_PLATFORM if USB_XHCI_HCD | |
| help | |
| Say Y or M here if your system has a Dual Role SuperSpeed | |
| USB controller based on the DesignWare USB3 IP Core. | |
| If you choose to build this driver is a dynamically linked | |
| module, the module will be called dwc3.ko. | |
| if USB_DWC3 | |
| config USB_DWC3_ULPI | |
| bool "Register ULPI PHY Interface" | |
| depends on USB_ULPI_BUS=y || USB_ULPI_BUS=USB_DWC3 | |
| help | |
| Select this if you have ULPI type PHY attached to your DWC3 | |
| controller. | |
| choice | |
| bool "DWC3 Mode Selection" | |
| default USB_DWC3_DUAL_ROLE if (USB && USB_GADGET) | |
| default USB_DWC3_HOST if (USB && !USB_GADGET) | |
| default USB_DWC3_GADGET if (!USB && USB_GADGET) | |
| config USB_DWC3_HOST | |
| bool "Host only mode" | |
| depends on USB=y || USB=USB_DWC3 | |
| help | |
| Select this when you want to use DWC3 in host mode only, | |
| thereby the gadget feature will be regressed. | |
| config USB_DWC3_GADGET | |
| bool "Gadget only mode" | |
| depends on USB_GADGET=y || USB_GADGET=USB_DWC3 | |
| help | |
| Select this when you want to use DWC3 in gadget mode only, | |
| thereby the host feature will be regressed. | |
| config USB_DWC3_DUAL_ROLE | |
| bool "Dual Role mode" | |
| depends on ((USB=y || USB=USB_DWC3) && (USB_GADGET=y || USB_GADGET=USB_DWC3)) | |
| depends on (EXTCON=y || EXTCON=USB_DWC3) | |
| help | |
| This is the default mode of working of DWC3 controller where | |
| both host and gadget features are enabled. | |
| endchoice | |
| comment "Platform Glue Driver Support" | |
| config USB_DWC3_OMAP | |
| tristate "Texas Instruments OMAP5 and similar Platforms" | |
| depends on EXTCON && (ARCH_OMAP2PLUS || COMPILE_TEST) | |
| depends on OF | |
| default USB_DWC3 | |
| help | |
| Some platforms from Texas Instruments like OMAP5, DRA7xxx and | |
| AM437x use this IP for USB2/3 functionality. | |
| Say 'Y' or 'M' here if you have one such device | |
| config USB_DWC3_EXYNOS | |
| tristate "Samsung Exynos Platform" | |
| depends on (ARCH_EXYNOS || COMPILE_TEST) && OF | |
| default USB_DWC3 | |
| help | |
| Recent Exynos5 SoCs ship with one DesignWare Core USB3 IP inside, | |
| say 'Y' or 'M' if you have one such device. | |
| config USB_DWC3_PCI | |
| tristate "PCIe-based Platforms" | |
| depends on USB_PCI && ACPI | |
| default USB_DWC3 | |
| help | |
| If you're using the DesignWare Core IP with a PCIe, please say | |
| 'Y' or 'M' here. | |
| One such PCIe-based platform is Synopsys' PCIe HAPS model of | |
| this IP. | |
| config USB_DWC3_KEYSTONE | |
| tristate "Texas Instruments Keystone2 Platforms" | |
| depends on ARCH_KEYSTONE || COMPILE_TEST | |
| default USB_DWC3 | |
| help | |
| Support of USB2/3 functionality in TI Keystone2 platforms. | |
| Say 'Y' or 'M' here if you have one such device | |
| config USB_DWC3_OF_SIMPLE | |
| tristate "Generic OF Simple Glue Layer" | |
| depends on OF && COMMON_CLK | |
| default USB_DWC3 | |
| help | |
| Support USB2/3 functionality in simple SoC integrations. | |
| Currently supports Xilinx and Qualcomm DWC USB3 IP. | |
| Say 'Y' or 'M' if you have one such device. | |
| config USB_DWC3_ST | |
| tristate "STMicroelectronics Platforms" | |
| depends on (ARCH_STI || COMPILE_TEST) && OF | |
| default USB_DWC3 | |
| help | |
| STMicroelectronics SoCs with one DesignWare Core USB3 IP | |
| inside (i.e. STiH407). | |
| Say 'Y' or 'M' if you have one such device. | |
| endif |