| /* | |
| * drivers/usb/host/ehci-orion.c | |
| * | |
| * Tzachi Perelstein <tzachi@marvell.com> | |
| * | |
| * This file is licensed under the terms of the GNU General Public | |
| * License version 2. This program is licensed "as is" without any | |
| * warranty of any kind, whether express or implied. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/mbus.h> | |
| #include <linux/clk.h> | |
| #include <linux/platform_data/usb-ehci-orion.h> | |
| #include <linux/of.h> | |
| #include <linux/phy/phy.h> | |
| #include <linux/of_device.h> | |
| #include <linux/of_irq.h> | |
| #include <linux/usb.h> | |
| #include <linux/usb/hcd.h> | |
| #include <linux/io.h> | |
| #include <linux/dma-mapping.h> | |
| #include "ehci.h" | |
| #define rdl(off) readl_relaxed(hcd->regs + (off)) | |
| #define wrl(off, val) writel_relaxed((val), hcd->regs + (off)) | |
| #define USB_CMD 0x140 | |
| #define USB_CMD_RUN BIT(0) | |
| #define USB_CMD_RESET BIT(1) | |
| #define USB_MODE 0x1a8 | |
| #define USB_MODE_MASK GENMASK(1, 0) | |
| #define USB_MODE_DEVICE 0x2 | |
| #define USB_MODE_HOST 0x3 | |
| #define USB_MODE_SDIS BIT(4) | |
| #define USB_CAUSE 0x310 | |
| #define USB_MASK 0x314 | |
| #define USB_WINDOW_CTRL(i) (0x320 + ((i) << 4)) | |
| #define USB_WINDOW_BASE(i) (0x324 + ((i) << 4)) | |
| #define USB_IPG 0x360 | |
| #define USB_PHY_PWR_CTRL 0x400 | |
| #define USB_PHY_TX_CTRL 0x420 | |
| #define USB_PHY_RX_CTRL 0x430 | |
| #define USB_PHY_IVREF_CTRL 0x440 | |
| #define USB_PHY_TST_GRP_CTRL 0x450 | |
| #define USB_SBUSCFG 0x90 | |
| /* BAWR = BARD = 3 : Align read/write bursts packets larger than 128 bytes */ | |
| #define USB_SBUSCFG_BAWR_ALIGN_128B (0x3 << 6) | |
| #define USB_SBUSCFG_BARD_ALIGN_128B (0x3 << 3) | |
| /* AHBBRST = 3 : Align AHB Burst to INCR16 (64 bytes) */ | |
| #define USB_SBUSCFG_AHBBRST_INCR16 (0x3 << 0) | |
| #define USB_SBUSCFG_DEF_VAL (USB_SBUSCFG_BAWR_ALIGN_128B \ | |
| | USB_SBUSCFG_BARD_ALIGN_128B \ | |
| | USB_SBUSCFG_AHBBRST_INCR16) | |
| #define DRIVER_DESC "EHCI orion driver" | |
| #define hcd_to_orion_priv(h) ((struct orion_ehci_hcd *)hcd_to_ehci(h)->priv) | |
| struct orion_ehci_hcd { | |
| struct clk *clk; | |
| struct phy *phy; | |
| }; | |
| static const char hcd_name[] = "ehci-orion"; | |
| static struct hc_driver __read_mostly ehci_orion_hc_driver; | |
| /* | |
| * Implement Orion USB controller specification guidelines | |
| */ | |
| static void orion_usb_phy_v1_setup(struct usb_hcd *hcd) | |
| { | |
| /* The below GLs are according to the Orion Errata document */ | |
| /* | |
| * Clear interrupt cause and mask | |
| */ | |
| wrl(USB_CAUSE, 0); | |
| wrl(USB_MASK, 0); | |
| /* | |
| * Reset controller | |
| */ | |
| wrl(USB_CMD, rdl(USB_CMD) | USB_CMD_RESET); | |
| while (rdl(USB_CMD) & USB_CMD_RESET); | |
| /* | |
| * GL# USB-10: Set IPG for non start of frame packets | |
| * Bits[14:8]=0xc | |
| */ | |
| wrl(USB_IPG, (rdl(USB_IPG) & ~0x7f00) | 0xc00); | |
| /* | |
| * GL# USB-9: USB 2.0 Power Control | |
| * BG_VSEL[7:6]=0x1 | |
| */ | |
| wrl(USB_PHY_PWR_CTRL, (rdl(USB_PHY_PWR_CTRL) & ~0xc0)| 0x40); | |
| /* | |
| * GL# USB-1: USB PHY Tx Control - force calibration to '8' | |
| * TXDATA_BLOCK_EN[21]=0x1, EXT_RCAL_EN[13]=0x1, IMP_CAL[6:3]=0x8 | |
| */ | |
| wrl(USB_PHY_TX_CTRL, (rdl(USB_PHY_TX_CTRL) & ~0x78) | 0x202040); | |
| /* | |
| * GL# USB-3 GL# USB-9: USB PHY Rx Control | |
| * RXDATA_BLOCK_LENGHT[31:30]=0x3, EDGE_DET_SEL[27:26]=0, | |
| * CDR_FASTLOCK_EN[21]=0, DISCON_THRESHOLD[9:8]=0, SQ_THRESH[7:4]=0x1 | |
| */ | |
| wrl(USB_PHY_RX_CTRL, (rdl(USB_PHY_RX_CTRL) & ~0xc2003f0) | 0xc0000010); | |
| /* | |
| * GL# USB-3 GL# USB-9: USB PHY IVREF Control | |
| * PLLVDD12[1:0]=0x2, RXVDD[5:4]=0x3, Reserved[19]=0 | |
| */ | |
| wrl(USB_PHY_IVREF_CTRL, (rdl(USB_PHY_IVREF_CTRL) & ~0x80003 ) | 0x32); | |
| /* | |
| * GL# USB-3 GL# USB-9: USB PHY Test Group Control | |
| * REG_FIFO_SQ_RST[15]=0 | |
| */ | |
| wrl(USB_PHY_TST_GRP_CTRL, rdl(USB_PHY_TST_GRP_CTRL) & ~0x8000); | |
| /* | |
| * Stop and reset controller | |
| */ | |
| wrl(USB_CMD, rdl(USB_CMD) & ~USB_CMD_RUN); | |
| wrl(USB_CMD, rdl(USB_CMD) | USB_CMD_RESET); | |
| while (rdl(USB_CMD) & USB_CMD_RESET); | |
| /* | |
| * GL# USB-5 Streaming disable REG_USB_MODE[4]=1 | |
| * TBD: This need to be done after each reset! | |
| * GL# USB-4 Setup USB Host mode | |
| */ | |
| wrl(USB_MODE, USB_MODE_SDIS | USB_MODE_HOST); | |
| } | |
| static void | |
| ehci_orion_conf_mbus_windows(struct usb_hcd *hcd, | |
| const struct mbus_dram_target_info *dram) | |
| { | |
| int i; | |
| for (i = 0; i < 4; i++) { | |
| wrl(USB_WINDOW_CTRL(i), 0); | |
| wrl(USB_WINDOW_BASE(i), 0); | |
| } | |
| for (i = 0; i < dram->num_cs; i++) { | |
| const struct mbus_dram_window *cs = dram->cs + i; | |
| wrl(USB_WINDOW_CTRL(i), ((cs->size - 1) & 0xffff0000) | | |
| (cs->mbus_attr << 8) | | |
| (dram->mbus_dram_target_id << 4) | 1); | |
| wrl(USB_WINDOW_BASE(i), cs->base); | |
| } | |
| } | |
| static int ehci_orion_drv_reset(struct usb_hcd *hcd) | |
| { | |
| struct device *dev = hcd->self.controller; | |
| int ret; | |
| ret = ehci_setup(hcd); | |
| if (ret) | |
| return ret; | |
| /* | |
| * For SoC without hlock, need to program sbuscfg value to guarantee | |
| * AHB master's burst would not overrun or underrun FIFO. | |
| * | |
| * sbuscfg reg has to be set after usb controller reset, otherwise | |
| * the value would be override to 0. | |
| */ | |
| if (of_device_is_compatible(dev->of_node, "marvell,armada-3700-ehci")) | |
| wrl(USB_SBUSCFG, USB_SBUSCFG_DEF_VAL); | |
| return ret; | |
| } | |
| static const struct ehci_driver_overrides orion_overrides __initconst = { | |
| .extra_priv_size = sizeof(struct orion_ehci_hcd), | |
| .reset = ehci_orion_drv_reset, | |
| }; | |
| static int ehci_orion_drv_probe(struct platform_device *pdev) | |
| { | |
| struct orion_ehci_data *pd = dev_get_platdata(&pdev->dev); | |
| const struct mbus_dram_target_info *dram; | |
| struct resource *res; | |
| struct usb_hcd *hcd; | |
| struct ehci_hcd *ehci; | |
| void __iomem *regs; | |
| int irq, err; | |
| enum orion_ehci_phy_ver phy_version; | |
| struct orion_ehci_hcd *priv; | |
| if (usb_disabled()) | |
| return -ENODEV; | |
| pr_debug("Initializing Orion-SoC USB Host Controller\n"); | |
| irq = platform_get_irq(pdev, 0); | |
| if (irq <= 0) { | |
| dev_err(&pdev->dev, | |
| "Found HC with no IRQ. Check %s setup!\n", | |
| dev_name(&pdev->dev)); | |
| err = -ENODEV; | |
| goto err; | |
| } | |
| /* | |
| * Right now device-tree probed devices don't get dma_mask | |
| * set. Since shared usb code relies on it, set it here for | |
| * now. Once we have dma capability bindings this can go away. | |
| */ | |
| err = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); | |
| if (err) | |
| goto err; | |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| regs = devm_ioremap_resource(&pdev->dev, res); | |
| if (IS_ERR(regs)) { | |
| err = PTR_ERR(regs); | |
| goto err; | |
| } | |
| hcd = usb_create_hcd(&ehci_orion_hc_driver, | |
| &pdev->dev, dev_name(&pdev->dev)); | |
| if (!hcd) { | |
| err = -ENOMEM; | |
| goto err; | |
| } | |
| hcd->rsrc_start = res->start; | |
| hcd->rsrc_len = resource_size(res); | |
| hcd->regs = regs; | |
| ehci = hcd_to_ehci(hcd); | |
| ehci->caps = hcd->regs + 0x100; | |
| hcd->has_tt = 1; | |
| priv = hcd_to_orion_priv(hcd); | |
| /* | |
| * Not all platforms can gate the clock, so it is not an error if | |
| * the clock does not exists. | |
| */ | |
| priv->clk = devm_clk_get(&pdev->dev, NULL); | |
| if (!IS_ERR(priv->clk)) | |
| clk_prepare_enable(priv->clk); | |
| priv->phy = devm_phy_optional_get(&pdev->dev, "usb"); | |
| if (IS_ERR(priv->phy)) { | |
| err = PTR_ERR(priv->phy); | |
| if (err != -ENOSYS) | |
| goto err_phy_get; | |
| } else { | |
| err = phy_init(priv->phy); | |
| if (err) | |
| goto err_phy_init; | |
| err = phy_power_on(priv->phy); | |
| if (err) | |
| goto err_phy_power_on; | |
| } | |
| /* | |
| * (Re-)program MBUS remapping windows if we are asked to. | |
| */ | |
| dram = mv_mbus_dram_info(); | |
| if (dram) | |
| ehci_orion_conf_mbus_windows(hcd, dram); | |
| /* | |
| * setup Orion USB controller. | |
| */ | |
| if (pdev->dev.of_node) | |
| phy_version = EHCI_PHY_NA; | |
| else | |
| phy_version = pd->phy_version; | |
| switch (phy_version) { | |
| case EHCI_PHY_NA: /* dont change USB phy settings */ | |
| break; | |
| case EHCI_PHY_ORION: | |
| orion_usb_phy_v1_setup(hcd); | |
| break; | |
| case EHCI_PHY_DD: | |
| case EHCI_PHY_KW: | |
| default: | |
| dev_warn(&pdev->dev, "USB phy version isn't supported.\n"); | |
| } | |
| err = usb_add_hcd(hcd, irq, IRQF_SHARED); | |
| if (err) | |
| goto err_add_hcd; | |
| device_wakeup_enable(hcd->self.controller); | |
| return 0; | |
| err_add_hcd: | |
| if (!IS_ERR(priv->phy)) | |
| phy_power_off(priv->phy); | |
| err_phy_power_on: | |
| if (!IS_ERR(priv->phy)) | |
| phy_exit(priv->phy); | |
| err_phy_init: | |
| err_phy_get: | |
| if (!IS_ERR(priv->clk)) | |
| clk_disable_unprepare(priv->clk); | |
| usb_put_hcd(hcd); | |
| err: | |
| dev_err(&pdev->dev, "init %s fail, %d\n", | |
| dev_name(&pdev->dev), err); | |
| return err; | |
| } | |
| static int ehci_orion_drv_remove(struct platform_device *pdev) | |
| { | |
| struct usb_hcd *hcd = platform_get_drvdata(pdev); | |
| struct orion_ehci_hcd *priv = hcd_to_orion_priv(hcd); | |
| usb_remove_hcd(hcd); | |
| if (!IS_ERR(priv->phy)) { | |
| phy_power_off(priv->phy); | |
| phy_exit(priv->phy); | |
| } | |
| if (!IS_ERR(priv->clk)) | |
| clk_disable_unprepare(priv->clk); | |
| usb_put_hcd(hcd); | |
| return 0; | |
| } | |
| static const struct of_device_id ehci_orion_dt_ids[] = { | |
| { .compatible = "marvell,orion-ehci", }, | |
| { .compatible = "marvell,armada-3700-ehci", }, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(of, ehci_orion_dt_ids); | |
| static struct platform_driver ehci_orion_driver = { | |
| .probe = ehci_orion_drv_probe, | |
| .remove = ehci_orion_drv_remove, | |
| .shutdown = usb_hcd_platform_shutdown, | |
| .driver = { | |
| .name = "orion-ehci", | |
| .of_match_table = ehci_orion_dt_ids, | |
| }, | |
| }; | |
| static int __init ehci_orion_init(void) | |
| { | |
| if (usb_disabled()) | |
| return -ENODEV; | |
| pr_info("%s: " DRIVER_DESC "\n", hcd_name); | |
| ehci_init_driver(&ehci_orion_hc_driver, &orion_overrides); | |
| return platform_driver_register(&ehci_orion_driver); | |
| } | |
| module_init(ehci_orion_init); | |
| static void __exit ehci_orion_cleanup(void) | |
| { | |
| platform_driver_unregister(&ehci_orion_driver); | |
| } | |
| module_exit(ehci_orion_cleanup); | |
| MODULE_DESCRIPTION(DRIVER_DESC); | |
| MODULE_ALIAS("platform:orion-ehci"); | |
| MODULE_AUTHOR("Tzachi Perelstein"); | |
| MODULE_LICENSE("GPL v2"); |