| /* | |
| * EHCI HCD (Host Controller Driver) for USB. | |
| * | |
| * Bus Glue for PPC On-Chip EHCI driver on the of_platform bus | |
| * Tested on AMCC PPC 440EPx | |
| * | |
| * Valentine Barshak <vbarshak@ru.mvista.com> | |
| * | |
| * Based on "ehci-ppc-soc.c" by Stefan Roese <sr@denx.de> | |
| * and "ohci-ppc-of.c" by Sylvain Munaut <tnt@246tNt.com> | |
| * | |
| * This file is licenced under the GPL. | |
| */ | |
| #include <linux/err.h> | |
| #include <linux/signal.h> | |
| #include <linux/of.h> | |
| #include <linux/of_address.h> | |
| #include <linux/of_irq.h> | |
| #include <linux/of_platform.h> | |
| static const struct hc_driver ehci_ppc_of_hc_driver = { | |
| .description = hcd_name, | |
| .product_desc = "OF EHCI", | |
| .hcd_priv_size = sizeof(struct ehci_hcd), | |
| /* | |
| * generic hardware linkage | |
| */ | |
| .irq = ehci_irq, | |
| .flags = HCD_MEMORY | HCD_USB2 | HCD_BH, | |
| /* | |
| * basic lifecycle operations | |
| */ | |
| .reset = ehci_setup, | |
| .start = ehci_run, | |
| .stop = ehci_stop, | |
| .shutdown = ehci_shutdown, | |
| /* | |
| * managing i/o requests and associated device resources | |
| */ | |
| .urb_enqueue = ehci_urb_enqueue, | |
| .urb_dequeue = ehci_urb_dequeue, | |
| .endpoint_disable = ehci_endpoint_disable, | |
| .endpoint_reset = ehci_endpoint_reset, | |
| /* | |
| * scheduling support | |
| */ | |
| .get_frame_number = ehci_get_frame, | |
| /* | |
| * root hub support | |
| */ | |
| .hub_status_data = ehci_hub_status_data, | |
| .hub_control = ehci_hub_control, | |
| #ifdef CONFIG_PM | |
| .bus_suspend = ehci_bus_suspend, | |
| .bus_resume = ehci_bus_resume, | |
| #endif | |
| .relinquish_port = ehci_relinquish_port, | |
| .port_handed_over = ehci_port_handed_over, | |
| .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, | |
| }; | |
| /* | |
| * 440EPx Errata USBH_3 | |
| * Fix: Enable Break Memory Transfer (BMT) in INSNREG3 | |
| */ | |
| #define PPC440EPX_EHCI0_INSREG_BMT (0x1 << 0) | |
| static int | |
| ppc44x_enable_bmt(struct device_node *dn) | |
| { | |
| __iomem u32 *insreg_virt; | |
| insreg_virt = of_iomap(dn, 1); | |
| if (!insreg_virt) | |
| return -EINVAL; | |
| out_be32(insreg_virt + 3, PPC440EPX_EHCI0_INSREG_BMT); | |
| iounmap(insreg_virt); | |
| return 0; | |
| } | |
| static int ehci_hcd_ppc_of_probe(struct platform_device *op) | |
| { | |
| struct device_node *dn = op->dev.of_node; | |
| struct usb_hcd *hcd; | |
| struct ehci_hcd *ehci = NULL; | |
| struct resource res; | |
| int irq; | |
| int rv; | |
| struct device_node *np; | |
| if (usb_disabled()) | |
| return -ENODEV; | |
| dev_dbg(&op->dev, "initializing PPC-OF USB Controller\n"); | |
| rv = of_address_to_resource(dn, 0, &res); | |
| if (rv) | |
| return rv; | |
| hcd = usb_create_hcd(&ehci_ppc_of_hc_driver, &op->dev, "PPC-OF USB"); | |
| if (!hcd) | |
| return -ENOMEM; | |
| hcd->rsrc_start = res.start; | |
| hcd->rsrc_len = resource_size(&res); | |
| irq = irq_of_parse_and_map(dn, 0); | |
| if (irq == NO_IRQ) { | |
| dev_err(&op->dev, "%s: irq_of_parse_and_map failed\n", | |
| __FILE__); | |
| rv = -EBUSY; | |
| goto err_irq; | |
| } | |
| hcd->regs = devm_ioremap_resource(&op->dev, &res); | |
| if (IS_ERR(hcd->regs)) { | |
| rv = PTR_ERR(hcd->regs); | |
| goto err_ioremap; | |
| } | |
| ehci = hcd_to_ehci(hcd); | |
| np = of_find_compatible_node(NULL, NULL, "ibm,usb-ohci-440epx"); | |
| if (np != NULL) { | |
| /* claim we really affected by usb23 erratum */ | |
| if (!of_address_to_resource(np, 0, &res)) | |
| ehci->ohci_hcctrl_reg = | |
| devm_ioremap(&op->dev, | |
| res.start + OHCI_HCCTRL_OFFSET, | |
| OHCI_HCCTRL_LEN); | |
| else | |
| pr_debug("%s: no ohci offset in fdt\n", __FILE__); | |
| if (!ehci->ohci_hcctrl_reg) { | |
| pr_debug("%s: ioremap for ohci hcctrl failed\n", __FILE__); | |
| } else { | |
| ehci->has_amcc_usb23 = 1; | |
| } | |
| } | |
| if (of_get_property(dn, "big-endian", NULL)) { | |
| ehci->big_endian_mmio = 1; | |
| ehci->big_endian_desc = 1; | |
| } | |
| if (of_get_property(dn, "big-endian-regs", NULL)) | |
| ehci->big_endian_mmio = 1; | |
| if (of_get_property(dn, "big-endian-desc", NULL)) | |
| ehci->big_endian_desc = 1; | |
| ehci->caps = hcd->regs; | |
| if (of_device_is_compatible(dn, "ibm,usb-ehci-440epx")) { | |
| rv = ppc44x_enable_bmt(dn); | |
| ehci_dbg(ehci, "Break Memory Transfer (BMT) is %senabled!\n", | |
| rv ? "NOT ": ""); | |
| } | |
| rv = usb_add_hcd(hcd, irq, 0); | |
| if (rv) | |
| goto err_ioremap; | |
| device_wakeup_enable(hcd->self.controller); | |
| return 0; | |
| err_ioremap: | |
| irq_dispose_mapping(irq); | |
| err_irq: | |
| usb_put_hcd(hcd); | |
| return rv; | |
| } | |
| static int ehci_hcd_ppc_of_remove(struct platform_device *op) | |
| { | |
| struct usb_hcd *hcd = platform_get_drvdata(op); | |
| struct ehci_hcd *ehci = hcd_to_ehci(hcd); | |
| struct device_node *np; | |
| struct resource res; | |
| dev_dbg(&op->dev, "stopping PPC-OF USB Controller\n"); | |
| usb_remove_hcd(hcd); | |
| irq_dispose_mapping(hcd->irq); | |
| /* use request_mem_region to test if the ohci driver is loaded. if so | |
| * ensure the ohci core is operational. | |
| */ | |
| if (ehci->has_amcc_usb23) { | |
| np = of_find_compatible_node(NULL, NULL, "ibm,usb-ohci-440epx"); | |
| if (np != NULL) { | |
| if (!of_address_to_resource(np, 0, &res)) | |
| if (!request_mem_region(res.start, | |
| 0x4, hcd_name)) | |
| set_ohci_hcfs(ehci, 1); | |
| else | |
| release_mem_region(res.start, 0x4); | |
| else | |
| pr_debug("%s: no ohci offset in fdt\n", __FILE__); | |
| of_node_put(np); | |
| } | |
| } | |
| usb_put_hcd(hcd); | |
| return 0; | |
| } | |
| static const struct of_device_id ehci_hcd_ppc_of_match[] = { | |
| { | |
| .compatible = "usb-ehci", | |
| }, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(of, ehci_hcd_ppc_of_match); | |
| static struct platform_driver ehci_hcd_ppc_of_driver = { | |
| .probe = ehci_hcd_ppc_of_probe, | |
| .remove = ehci_hcd_ppc_of_remove, | |
| .shutdown = usb_hcd_platform_shutdown, | |
| .driver = { | |
| .name = "ppc-of-ehci", | |
| .of_match_table = ehci_hcd_ppc_of_match, | |
| }, | |
| }; |