| /* | |
| * Freescale QUICC Engine USB Host Controller Driver | |
| * | |
| * Copyright (c) Freescale Semicondutor, Inc. 2006. | |
| * Shlomi Gridish <gridish@freescale.com> | |
| * Jerry Huang <Chang-Ming.Huang@freescale.com> | |
| * Copyright (c) Logic Product Development, Inc. 2007 | |
| * Peter Barada <peterb@logicpd.com> | |
| * Copyright (c) MontaVista Software, Inc. 2008. | |
| * Anton Vorontsov <avorontsov@ru.mvista.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the | |
| * Free Software Foundation; either version 2 of the License, or (at your | |
| * option) any later version. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/types.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/kernel.h> | |
| #include <linux/delay.h> | |
| #include <linux/errno.h> | |
| #include <linux/list.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/io.h> | |
| #include <linux/usb.h> | |
| #include <linux/usb/hcd.h> | |
| #include <linux/of_address.h> | |
| #include <linux/of_irq.h> | |
| #include <linux/of_platform.h> | |
| #include <linux/of_gpio.h> | |
| #include <linux/slab.h> | |
| #include <soc/fsl/qe/qe.h> | |
| #include <asm/fsl_gtm.h> | |
| #include "fhci.h" | |
| void fhci_start_sof_timer(struct fhci_hcd *fhci) | |
| { | |
| fhci_dbg(fhci, "-> %s\n", __func__); | |
| /* clear frame_n */ | |
| out_be16(&fhci->pram->frame_num, 0); | |
| out_be16(&fhci->regs->usb_ussft, 0); | |
| setbits8(&fhci->regs->usb_usmod, USB_MODE_SFTE); | |
| fhci_dbg(fhci, "<- %s\n", __func__); | |
| } | |
| void fhci_stop_sof_timer(struct fhci_hcd *fhci) | |
| { | |
| fhci_dbg(fhci, "-> %s\n", __func__); | |
| clrbits8(&fhci->regs->usb_usmod, USB_MODE_SFTE); | |
| gtm_stop_timer16(fhci->timer); | |
| fhci_dbg(fhci, "<- %s\n", __func__); | |
| } | |
| u16 fhci_get_sof_timer_count(struct fhci_usb *usb) | |
| { | |
| return be16_to_cpu(in_be16(&usb->fhci->regs->usb_ussft) / 12); | |
| } | |
| /* initialize the endpoint zero */ | |
| static u32 endpoint_zero_init(struct fhci_usb *usb, | |
| enum fhci_mem_alloc data_mem, | |
| u32 ring_len) | |
| { | |
| u32 rc; | |
| rc = fhci_create_ep(usb, data_mem, ring_len); | |
| if (rc) | |
| return rc; | |
| /* inilialize endpoint registers */ | |
| fhci_init_ep_registers(usb, usb->ep0, data_mem); | |
| return 0; | |
| } | |
| /* enable the USB interrupts */ | |
| void fhci_usb_enable_interrupt(struct fhci_usb *usb) | |
| { | |
| struct fhci_hcd *fhci = usb->fhci; | |
| if (usb->intr_nesting_cnt == 1) { | |
| /* initialize the USB interrupt */ | |
| enable_irq(fhci_to_hcd(fhci)->irq); | |
| /* initialize the event register and mask register */ | |
| out_be16(&usb->fhci->regs->usb_usber, 0xffff); | |
| out_be16(&usb->fhci->regs->usb_usbmr, usb->saved_msk); | |
| /* enable the timer interrupts */ | |
| enable_irq(fhci->timer->irq); | |
| } else if (usb->intr_nesting_cnt > 1) | |
| fhci_info(fhci, "unbalanced USB interrupts nesting\n"); | |
| usb->intr_nesting_cnt--; | |
| } | |
| /* disable the usb interrupt */ | |
| void fhci_usb_disable_interrupt(struct fhci_usb *usb) | |
| { | |
| struct fhci_hcd *fhci = usb->fhci; | |
| if (usb->intr_nesting_cnt == 0) { | |
| /* disable the timer interrupt */ | |
| disable_irq_nosync(fhci->timer->irq); | |
| /* disable the usb interrupt */ | |
| disable_irq_nosync(fhci_to_hcd(fhci)->irq); | |
| out_be16(&usb->fhci->regs->usb_usbmr, 0); | |
| } | |
| usb->intr_nesting_cnt++; | |
| } | |
| /* enable the USB controller */ | |
| static u32 fhci_usb_enable(struct fhci_hcd *fhci) | |
| { | |
| struct fhci_usb *usb = fhci->usb_lld; | |
| out_be16(&usb->fhci->regs->usb_usber, 0xffff); | |
| out_be16(&usb->fhci->regs->usb_usbmr, usb->saved_msk); | |
| setbits8(&usb->fhci->regs->usb_usmod, USB_MODE_EN); | |
| mdelay(100); | |
| return 0; | |
| } | |
| /* disable the USB controller */ | |
| static u32 fhci_usb_disable(struct fhci_hcd *fhci) | |
| { | |
| struct fhci_usb *usb = fhci->usb_lld; | |
| fhci_usb_disable_interrupt(usb); | |
| fhci_port_disable(fhci); | |
| /* disable the usb controller */ | |
| if (usb->port_status == FHCI_PORT_FULL || | |
| usb->port_status == FHCI_PORT_LOW) | |
| fhci_device_disconnected_interrupt(fhci); | |
| clrbits8(&usb->fhci->regs->usb_usmod, USB_MODE_EN); | |
| return 0; | |
| } | |
| /* check the bus state by polling the QE bit on the IO ports */ | |
| int fhci_ioports_check_bus_state(struct fhci_hcd *fhci) | |
| { | |
| u8 bits = 0; | |
| /* check USBOE,if transmitting,exit */ | |
| if (!gpio_get_value(fhci->gpios[GPIO_USBOE])) | |
| return -1; | |
| /* check USBRP */ | |
| if (gpio_get_value(fhci->gpios[GPIO_USBRP])) | |
| bits |= 0x2; | |
| /* check USBRN */ | |
| if (gpio_get_value(fhci->gpios[GPIO_USBRN])) | |
| bits |= 0x1; | |
| return bits; | |
| } | |
| static void fhci_mem_free(struct fhci_hcd *fhci) | |
| { | |
| struct ed *ed; | |
| struct ed *next_ed; | |
| struct td *td; | |
| struct td *next_td; | |
| list_for_each_entry_safe(ed, next_ed, &fhci->empty_eds, node) { | |
| list_del(&ed->node); | |
| kfree(ed); | |
| } | |
| list_for_each_entry_safe(td, next_td, &fhci->empty_tds, node) { | |
| list_del(&td->node); | |
| kfree(td); | |
| } | |
| kfree(fhci->vroot_hub); | |
| fhci->vroot_hub = NULL; | |
| kfree(fhci->hc_list); | |
| fhci->hc_list = NULL; | |
| } | |
| static int fhci_mem_init(struct fhci_hcd *fhci) | |
| { | |
| int i; | |
| fhci->hc_list = kzalloc(sizeof(*fhci->hc_list), GFP_KERNEL); | |
| if (!fhci->hc_list) | |
| goto err; | |
| INIT_LIST_HEAD(&fhci->hc_list->ctrl_list); | |
| INIT_LIST_HEAD(&fhci->hc_list->bulk_list); | |
| INIT_LIST_HEAD(&fhci->hc_list->iso_list); | |
| INIT_LIST_HEAD(&fhci->hc_list->intr_list); | |
| INIT_LIST_HEAD(&fhci->hc_list->done_list); | |
| fhci->vroot_hub = kzalloc(sizeof(*fhci->vroot_hub), GFP_KERNEL); | |
| if (!fhci->vroot_hub) | |
| goto err; | |
| INIT_LIST_HEAD(&fhci->empty_eds); | |
| INIT_LIST_HEAD(&fhci->empty_tds); | |
| /* initialize work queue to handle done list */ | |
| fhci_tasklet.data = (unsigned long)fhci; | |
| fhci->process_done_task = &fhci_tasklet; | |
| for (i = 0; i < MAX_TDS; i++) { | |
| struct td *td; | |
| td = kmalloc(sizeof(*td), GFP_KERNEL); | |
| if (!td) | |
| goto err; | |
| fhci_recycle_empty_td(fhci, td); | |
| } | |
| for (i = 0; i < MAX_EDS; i++) { | |
| struct ed *ed; | |
| ed = kmalloc(sizeof(*ed), GFP_KERNEL); | |
| if (!ed) | |
| goto err; | |
| fhci_recycle_empty_ed(fhci, ed); | |
| } | |
| fhci->active_urbs = 0; | |
| return 0; | |
| err: | |
| fhci_mem_free(fhci); | |
| return -ENOMEM; | |
| } | |
| /* destroy the fhci_usb structure */ | |
| static void fhci_usb_free(void *lld) | |
| { | |
| struct fhci_usb *usb = lld; | |
| struct fhci_hcd *fhci; | |
| if (usb) { | |
| fhci = usb->fhci; | |
| fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF); | |
| fhci_ep0_free(usb); | |
| kfree(usb->actual_frame); | |
| kfree(usb); | |
| } | |
| } | |
| /* initialize the USB */ | |
| static int fhci_usb_init(struct fhci_hcd *fhci) | |
| { | |
| struct fhci_usb *usb = fhci->usb_lld; | |
| memset_io(usb->fhci->pram, 0, FHCI_PRAM_SIZE); | |
| usb->port_status = FHCI_PORT_DISABLED; | |
| usb->max_frame_usage = FRAME_TIME_USAGE; | |
| usb->sw_transaction_time = SW_FIX_TIME_BETWEEN_TRANSACTION; | |
| usb->actual_frame = kzalloc(sizeof(*usb->actual_frame), GFP_KERNEL); | |
| if (!usb->actual_frame) { | |
| fhci_usb_free(usb); | |
| return -ENOMEM; | |
| } | |
| INIT_LIST_HEAD(&usb->actual_frame->tds_list); | |
| /* initializing registers on chip, clear frame number */ | |
| out_be16(&fhci->pram->frame_num, 0); | |
| /* clear rx state */ | |
| out_be32(&fhci->pram->rx_state, 0); | |
| /* set mask register */ | |
| usb->saved_msk = (USB_E_TXB_MASK | | |
| USB_E_TXE1_MASK | | |
| USB_E_IDLE_MASK | | |
| USB_E_RESET_MASK | USB_E_SFT_MASK | USB_E_MSF_MASK); | |
| out_8(&usb->fhci->regs->usb_usmod, USB_MODE_HOST | USB_MODE_EN); | |
| /* clearing the mask register */ | |
| out_be16(&usb->fhci->regs->usb_usbmr, 0); | |
| /* initialing the event register */ | |
| out_be16(&usb->fhci->regs->usb_usber, 0xffff); | |
| if (endpoint_zero_init(usb, DEFAULT_DATA_MEM, DEFAULT_RING_LEN) != 0) { | |
| fhci_usb_free(usb); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| /* initialize the fhci_usb struct and the corresponding data staruct */ | |
| static struct fhci_usb *fhci_create_lld(struct fhci_hcd *fhci) | |
| { | |
| struct fhci_usb *usb; | |
| /* allocate memory for SCC data structure */ | |
| usb = kzalloc(sizeof(*usb), GFP_KERNEL); | |
| if (!usb) | |
| return NULL; | |
| usb->fhci = fhci; | |
| usb->hc_list = fhci->hc_list; | |
| usb->vroot_hub = fhci->vroot_hub; | |
| usb->transfer_confirm = fhci_transfer_confirm_callback; | |
| return usb; | |
| } | |
| static int fhci_start(struct usb_hcd *hcd) | |
| { | |
| int ret; | |
| struct fhci_hcd *fhci = hcd_to_fhci(hcd); | |
| ret = fhci_mem_init(fhci); | |
| if (ret) { | |
| fhci_err(fhci, "failed to allocate memory\n"); | |
| goto err; | |
| } | |
| fhci->usb_lld = fhci_create_lld(fhci); | |
| if (!fhci->usb_lld) { | |
| fhci_err(fhci, "low level driver config failed\n"); | |
| ret = -ENOMEM; | |
| goto err; | |
| } | |
| ret = fhci_usb_init(fhci); | |
| if (ret) { | |
| fhci_err(fhci, "low level driver initialize failed\n"); | |
| goto err; | |
| } | |
| spin_lock_init(&fhci->lock); | |
| /* connect the virtual root hub */ | |
| fhci->vroot_hub->dev_num = 1; /* this field may be needed to fix */ | |
| fhci->vroot_hub->hub.wHubStatus = 0; | |
| fhci->vroot_hub->hub.wHubChange = 0; | |
| fhci->vroot_hub->port.wPortStatus = 0; | |
| fhci->vroot_hub->port.wPortChange = 0; | |
| hcd->state = HC_STATE_RUNNING; | |
| /* | |
| * From here on, hub_wq concurrently accesses the root | |
| * hub; drivers will be talking to enumerated devices. | |
| * (On restart paths, hub_wq already knows about the root | |
| * hub and could find work as soon as we wrote FLAG_CF.) | |
| * | |
| * Before this point the HC was idle/ready. After, hub_wq | |
| * and device drivers may start it running. | |
| */ | |
| fhci_usb_enable(fhci); | |
| return 0; | |
| err: | |
| fhci_mem_free(fhci); | |
| return ret; | |
| } | |
| static void fhci_stop(struct usb_hcd *hcd) | |
| { | |
| struct fhci_hcd *fhci = hcd_to_fhci(hcd); | |
| fhci_usb_disable_interrupt(fhci->usb_lld); | |
| fhci_usb_disable(fhci); | |
| fhci_usb_free(fhci->usb_lld); | |
| fhci->usb_lld = NULL; | |
| fhci_mem_free(fhci); | |
| } | |
| static int fhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, | |
| gfp_t mem_flags) | |
| { | |
| struct fhci_hcd *fhci = hcd_to_fhci(hcd); | |
| u32 pipe = urb->pipe; | |
| int ret; | |
| int i; | |
| int size = 0; | |
| struct urb_priv *urb_priv; | |
| unsigned long flags; | |
| switch (usb_pipetype(pipe)) { | |
| case PIPE_CONTROL: | |
| /* 1 td fro setup,1 for ack */ | |
| size = 2; | |
| case PIPE_BULK: | |
| /* one td for every 4096 bytes(can be up to 8k) */ | |
| size += urb->transfer_buffer_length / 4096; | |
| /* ...add for any remaining bytes... */ | |
| if ((urb->transfer_buffer_length % 4096) != 0) | |
| size++; | |
| /* ..and maybe a zero length packet to wrap it up */ | |
| if (size == 0) | |
| size++; | |
| else if ((urb->transfer_flags & URB_ZERO_PACKET) != 0 | |
| && (urb->transfer_buffer_length | |
| % usb_maxpacket(urb->dev, pipe, | |
| usb_pipeout(pipe))) != 0) | |
| size++; | |
| break; | |
| case PIPE_ISOCHRONOUS: | |
| size = urb->number_of_packets; | |
| if (size <= 0) | |
| return -EINVAL; | |
| for (i = 0; i < urb->number_of_packets; i++) { | |
| urb->iso_frame_desc[i].actual_length = 0; | |
| urb->iso_frame_desc[i].status = (u32) (-EXDEV); | |
| } | |
| break; | |
| case PIPE_INTERRUPT: | |
| size = 1; | |
| } | |
| /* allocate the private part of the URB */ | |
| urb_priv = kzalloc(sizeof(*urb_priv), mem_flags); | |
| if (!urb_priv) | |
| return -ENOMEM; | |
| /* allocate the private part of the URB */ | |
| urb_priv->tds = kcalloc(size, sizeof(*urb_priv->tds), mem_flags); | |
| if (!urb_priv->tds) { | |
| kfree(urb_priv); | |
| return -ENOMEM; | |
| } | |
| spin_lock_irqsave(&fhci->lock, flags); | |
| ret = usb_hcd_link_urb_to_ep(hcd, urb); | |
| if (ret) | |
| goto err; | |
| /* fill the private part of the URB */ | |
| urb_priv->num_of_tds = size; | |
| urb->status = -EINPROGRESS; | |
| urb->actual_length = 0; | |
| urb->error_count = 0; | |
| urb->hcpriv = urb_priv; | |
| fhci_queue_urb(fhci, urb); | |
| err: | |
| if (ret) { | |
| kfree(urb_priv->tds); | |
| kfree(urb_priv); | |
| } | |
| spin_unlock_irqrestore(&fhci->lock, flags); | |
| return ret; | |
| } | |
| /* dequeue FHCI URB */ | |
| static int fhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) | |
| { | |
| struct fhci_hcd *fhci = hcd_to_fhci(hcd); | |
| struct fhci_usb *usb = fhci->usb_lld; | |
| int ret = -EINVAL; | |
| unsigned long flags; | |
| if (!urb || !urb->dev || !urb->dev->bus) | |
| goto out; | |
| spin_lock_irqsave(&fhci->lock, flags); | |
| ret = usb_hcd_check_unlink_urb(hcd, urb, status); | |
| if (ret) | |
| goto out2; | |
| if (usb->port_status != FHCI_PORT_DISABLED) { | |
| struct urb_priv *urb_priv; | |
| /* | |
| * flag the urb's data for deletion in some upcoming | |
| * SF interrupt's delete list processing | |
| */ | |
| urb_priv = urb->hcpriv; | |
| if (!urb_priv || (urb_priv->state == URB_DEL)) | |
| goto out2; | |
| urb_priv->state = URB_DEL; | |
| /* already pending? */ | |
| urb_priv->ed->state = FHCI_ED_URB_DEL; | |
| } else { | |
| fhci_urb_complete_free(fhci, urb); | |
| } | |
| out2: | |
| spin_unlock_irqrestore(&fhci->lock, flags); | |
| out: | |
| return ret; | |
| } | |
| static void fhci_endpoint_disable(struct usb_hcd *hcd, | |
| struct usb_host_endpoint *ep) | |
| { | |
| struct fhci_hcd *fhci; | |
| struct ed *ed; | |
| unsigned long flags; | |
| fhci = hcd_to_fhci(hcd); | |
| spin_lock_irqsave(&fhci->lock, flags); | |
| ed = ep->hcpriv; | |
| if (ed) { | |
| while (ed->td_head != NULL) { | |
| struct td *td = fhci_remove_td_from_ed(ed); | |
| fhci_urb_complete_free(fhci, td->urb); | |
| } | |
| fhci_recycle_empty_ed(fhci, ed); | |
| ep->hcpriv = NULL; | |
| } | |
| spin_unlock_irqrestore(&fhci->lock, flags); | |
| } | |
| static int fhci_get_frame_number(struct usb_hcd *hcd) | |
| { | |
| struct fhci_hcd *fhci = hcd_to_fhci(hcd); | |
| return get_frame_num(fhci); | |
| } | |
| static const struct hc_driver fhci_driver = { | |
| .description = "fsl,usb-fhci", | |
| .product_desc = "FHCI HOST Controller", | |
| .hcd_priv_size = sizeof(struct fhci_hcd), | |
| /* generic hardware linkage */ | |
| .irq = fhci_irq, | |
| .flags = HCD_USB11 | HCD_MEMORY, | |
| /* basic lifecycle operation */ | |
| .start = fhci_start, | |
| .stop = fhci_stop, | |
| /* managing i/o requests and associated device resources */ | |
| .urb_enqueue = fhci_urb_enqueue, | |
| .urb_dequeue = fhci_urb_dequeue, | |
| .endpoint_disable = fhci_endpoint_disable, | |
| /* scheduling support */ | |
| .get_frame_number = fhci_get_frame_number, | |
| /* root hub support */ | |
| .hub_status_data = fhci_hub_status_data, | |
| .hub_control = fhci_hub_control, | |
| }; | |
| static int of_fhci_probe(struct platform_device *ofdev) | |
| { | |
| struct device *dev = &ofdev->dev; | |
| struct device_node *node = dev->of_node; | |
| struct usb_hcd *hcd; | |
| struct fhci_hcd *fhci; | |
| struct resource usb_regs; | |
| unsigned long pram_addr; | |
| unsigned int usb_irq; | |
| const char *sprop; | |
| const u32 *iprop; | |
| int size; | |
| int ret; | |
| int i; | |
| int j; | |
| if (usb_disabled()) | |
| return -ENODEV; | |
| sprop = of_get_property(node, "mode", NULL); | |
| if (sprop && strcmp(sprop, "host")) | |
| return -ENODEV; | |
| hcd = usb_create_hcd(&fhci_driver, dev, dev_name(dev)); | |
| if (!hcd) { | |
| dev_err(dev, "could not create hcd\n"); | |
| return -ENOMEM; | |
| } | |
| fhci = hcd_to_fhci(hcd); | |
| hcd->self.controller = dev; | |
| dev_set_drvdata(dev, hcd); | |
| iprop = of_get_property(node, "hub-power-budget", &size); | |
| if (iprop && size == sizeof(*iprop)) | |
| hcd->power_budget = *iprop; | |
| /* FHCI registers. */ | |
| ret = of_address_to_resource(node, 0, &usb_regs); | |
| if (ret) { | |
| dev_err(dev, "could not get regs\n"); | |
| goto err_regs; | |
| } | |
| hcd->regs = ioremap(usb_regs.start, resource_size(&usb_regs)); | |
| if (!hcd->regs) { | |
| dev_err(dev, "could not ioremap regs\n"); | |
| ret = -ENOMEM; | |
| goto err_regs; | |
| } | |
| fhci->regs = hcd->regs; | |
| /* Parameter RAM. */ | |
| iprop = of_get_property(node, "reg", &size); | |
| if (!iprop || size < sizeof(*iprop) * 4) { | |
| dev_err(dev, "can't get pram offset\n"); | |
| ret = -EINVAL; | |
| goto err_pram; | |
| } | |
| pram_addr = cpm_muram_alloc(FHCI_PRAM_SIZE, 64); | |
| if (IS_ERR_VALUE(pram_addr)) { | |
| dev_err(dev, "failed to allocate usb pram\n"); | |
| ret = -ENOMEM; | |
| goto err_pram; | |
| } | |
| qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, QE_CR_SUBBLOCK_USB, | |
| QE_CR_PROTOCOL_UNSPECIFIED, pram_addr); | |
| fhci->pram = cpm_muram_addr(pram_addr); | |
| /* GPIOs and pins */ | |
| for (i = 0; i < NUM_GPIOS; i++) { | |
| int gpio; | |
| enum of_gpio_flags flags; | |
| gpio = of_get_gpio_flags(node, i, &flags); | |
| fhci->gpios[i] = gpio; | |
| fhci->alow_gpios[i] = flags & OF_GPIO_ACTIVE_LOW; | |
| if (!gpio_is_valid(gpio)) { | |
| if (i < GPIO_SPEED) { | |
| dev_err(dev, "incorrect GPIO%d: %d\n", | |
| i, gpio); | |
| goto err_gpios; | |
| } else { | |
| dev_info(dev, "assuming board doesn't have " | |
| "%s gpio\n", i == GPIO_SPEED ? | |
| "speed" : "power"); | |
| continue; | |
| } | |
| } | |
| ret = gpio_request(gpio, dev_name(dev)); | |
| if (ret) { | |
| dev_err(dev, "failed to request gpio %d", i); | |
| goto err_gpios; | |
| } | |
| if (i >= GPIO_SPEED) { | |
| ret = gpio_direction_output(gpio, 0); | |
| if (ret) { | |
| dev_err(dev, "failed to set gpio %d as " | |
| "an output\n", i); | |
| i++; | |
| goto err_gpios; | |
| } | |
| } | |
| } | |
| for (j = 0; j < NUM_PINS; j++) { | |
| fhci->pins[j] = qe_pin_request(node, j); | |
| if (IS_ERR(fhci->pins[j])) { | |
| ret = PTR_ERR(fhci->pins[j]); | |
| dev_err(dev, "can't get pin %d: %d\n", j, ret); | |
| goto err_pins; | |
| } | |
| } | |
| /* Frame limit timer and its interrupt. */ | |
| fhci->timer = gtm_get_timer16(); | |
| if (IS_ERR(fhci->timer)) { | |
| ret = PTR_ERR(fhci->timer); | |
| dev_err(dev, "failed to request qe timer: %i", ret); | |
| goto err_get_timer; | |
| } | |
| ret = request_irq(fhci->timer->irq, fhci_frame_limit_timer_irq, | |
| 0, "qe timer (usb)", hcd); | |
| if (ret) { | |
| dev_err(dev, "failed to request timer irq"); | |
| goto err_timer_irq; | |
| } | |
| /* USB Host interrupt. */ | |
| usb_irq = irq_of_parse_and_map(node, 0); | |
| if (usb_irq == NO_IRQ) { | |
| dev_err(dev, "could not get usb irq\n"); | |
| ret = -EINVAL; | |
| goto err_usb_irq; | |
| } | |
| /* Clocks. */ | |
| sprop = of_get_property(node, "fsl,fullspeed-clock", NULL); | |
| if (sprop) { | |
| fhci->fullspeed_clk = qe_clock_source(sprop); | |
| if (fhci->fullspeed_clk == QE_CLK_DUMMY) { | |
| dev_err(dev, "wrong fullspeed-clock\n"); | |
| ret = -EINVAL; | |
| goto err_clocks; | |
| } | |
| } | |
| sprop = of_get_property(node, "fsl,lowspeed-clock", NULL); | |
| if (sprop) { | |
| fhci->lowspeed_clk = qe_clock_source(sprop); | |
| if (fhci->lowspeed_clk == QE_CLK_DUMMY) { | |
| dev_err(dev, "wrong lowspeed-clock\n"); | |
| ret = -EINVAL; | |
| goto err_clocks; | |
| } | |
| } | |
| if (fhci->fullspeed_clk == QE_CLK_NONE && | |
| fhci->lowspeed_clk == QE_CLK_NONE) { | |
| dev_err(dev, "no clocks specified\n"); | |
| ret = -EINVAL; | |
| goto err_clocks; | |
| } | |
| dev_info(dev, "at 0x%p, irq %d\n", hcd->regs, usb_irq); | |
| fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF); | |
| /* Start with full-speed, if possible. */ | |
| if (fhci->fullspeed_clk != QE_CLK_NONE) { | |
| fhci_config_transceiver(fhci, FHCI_PORT_FULL); | |
| qe_usb_clock_set(fhci->fullspeed_clk, USB_CLOCK); | |
| } else { | |
| fhci_config_transceiver(fhci, FHCI_PORT_LOW); | |
| qe_usb_clock_set(fhci->lowspeed_clk, USB_CLOCK >> 3); | |
| } | |
| /* Clear and disable any pending interrupts. */ | |
| out_be16(&fhci->regs->usb_usber, 0xffff); | |
| out_be16(&fhci->regs->usb_usbmr, 0); | |
| ret = usb_add_hcd(hcd, usb_irq, 0); | |
| if (ret < 0) | |
| goto err_add_hcd; | |
| device_wakeup_enable(hcd->self.controller); | |
| fhci_dfs_create(fhci); | |
| return 0; | |
| err_add_hcd: | |
| err_clocks: | |
| irq_dispose_mapping(usb_irq); | |
| err_usb_irq: | |
| free_irq(fhci->timer->irq, hcd); | |
| err_timer_irq: | |
| gtm_put_timer16(fhci->timer); | |
| err_get_timer: | |
| err_pins: | |
| while (--j >= 0) | |
| qe_pin_free(fhci->pins[j]); | |
| err_gpios: | |
| while (--i >= 0) { | |
| if (gpio_is_valid(fhci->gpios[i])) | |
| gpio_free(fhci->gpios[i]); | |
| } | |
| cpm_muram_free(pram_addr); | |
| err_pram: | |
| iounmap(hcd->regs); | |
| err_regs: | |
| usb_put_hcd(hcd); | |
| return ret; | |
| } | |
| static int fhci_remove(struct device *dev) | |
| { | |
| struct usb_hcd *hcd = dev_get_drvdata(dev); | |
| struct fhci_hcd *fhci = hcd_to_fhci(hcd); | |
| int i; | |
| int j; | |
| usb_remove_hcd(hcd); | |
| free_irq(fhci->timer->irq, hcd); | |
| gtm_put_timer16(fhci->timer); | |
| cpm_muram_free(cpm_muram_offset(fhci->pram)); | |
| for (i = 0; i < NUM_GPIOS; i++) { | |
| if (!gpio_is_valid(fhci->gpios[i])) | |
| continue; | |
| gpio_free(fhci->gpios[i]); | |
| } | |
| for (j = 0; j < NUM_PINS; j++) | |
| qe_pin_free(fhci->pins[j]); | |
| fhci_dfs_destroy(fhci); | |
| usb_put_hcd(hcd); | |
| return 0; | |
| } | |
| static int of_fhci_remove(struct platform_device *ofdev) | |
| { | |
| return fhci_remove(&ofdev->dev); | |
| } | |
| static const struct of_device_id of_fhci_match[] = { | |
| { .compatible = "fsl,mpc8323-qe-usb", }, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(of, of_fhci_match); | |
| static struct platform_driver of_fhci_driver = { | |
| .driver = { | |
| .name = "fsl,usb-fhci", | |
| .of_match_table = of_fhci_match, | |
| }, | |
| .probe = of_fhci_probe, | |
| .remove = of_fhci_remove, | |
| }; | |
| module_platform_driver(of_fhci_driver); | |
| MODULE_DESCRIPTION("USB Freescale Host Controller Interface Driver"); | |
| MODULE_AUTHOR("Shlomi Gridish <gridish@freescale.com>, " | |
| "Jerry Huang <Chang-Ming.Huang@freescale.com>, " | |
| "Anton Vorontsov <avorontsov@ru.mvista.com>"); | |
| MODULE_LICENSE("GPL"); |