| /* | |
| * Setup platform devices needed by the Freescale multi-port host | |
| * and/or dual-role USB controller modules based on the description | |
| * in flat device tree. | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the | |
| * Free Software Foundation; either version 2 of the License, or (at your | |
| * option) any later version. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/fsl_devices.h> | |
| #include <linux/err.h> | |
| #include <linux/io.h> | |
| #include <linux/of_platform.h> | |
| #include <linux/clk.h> | |
| #include <linux/module.h> | |
| #include <linux/dma-mapping.h> | |
| struct fsl_usb2_dev_data { | |
| char *dr_mode; /* controller mode */ | |
| char *drivers[3]; /* drivers to instantiate for this mode */ | |
| enum fsl_usb2_operating_modes op_mode; /* operating mode */ | |
| }; | |
| static struct fsl_usb2_dev_data dr_mode_data[] = { | |
| { | |
| .dr_mode = "host", | |
| .drivers = { "fsl-ehci", NULL, NULL, }, | |
| .op_mode = FSL_USB2_DR_HOST, | |
| }, | |
| { | |
| .dr_mode = "otg", | |
| .drivers = { "fsl-usb2-otg", "fsl-ehci", "fsl-usb2-udc", }, | |
| .op_mode = FSL_USB2_DR_OTG, | |
| }, | |
| { | |
| .dr_mode = "peripheral", | |
| .drivers = { "fsl-usb2-udc", NULL, NULL, }, | |
| .op_mode = FSL_USB2_DR_DEVICE, | |
| }, | |
| }; | |
| static struct fsl_usb2_dev_data *get_dr_mode_data(struct device_node *np) | |
| { | |
| const unsigned char *prop; | |
| int i; | |
| prop = of_get_property(np, "dr_mode", NULL); | |
| if (prop) { | |
| for (i = 0; i < ARRAY_SIZE(dr_mode_data); i++) { | |
| if (!strcmp(prop, dr_mode_data[i].dr_mode)) | |
| return &dr_mode_data[i]; | |
| } | |
| } | |
| pr_warn("%pOF: Invalid 'dr_mode' property, fallback to host mode\n", | |
| np); | |
| return &dr_mode_data[0]; /* mode not specified, use host */ | |
| } | |
| static enum fsl_usb2_phy_modes determine_usb_phy(const char *phy_type) | |
| { | |
| if (!phy_type) | |
| return FSL_USB2_PHY_NONE; | |
| if (!strcasecmp(phy_type, "ulpi")) | |
| return FSL_USB2_PHY_ULPI; | |
| if (!strcasecmp(phy_type, "utmi")) | |
| return FSL_USB2_PHY_UTMI; | |
| if (!strcasecmp(phy_type, "utmi_wide")) | |
| return FSL_USB2_PHY_UTMI_WIDE; | |
| if (!strcasecmp(phy_type, "utmi_dual")) | |
| return FSL_USB2_PHY_UTMI_DUAL; | |
| if (!strcasecmp(phy_type, "serial")) | |
| return FSL_USB2_PHY_SERIAL; | |
| return FSL_USB2_PHY_NONE; | |
| } | |
| static struct platform_device *fsl_usb2_device_register( | |
| struct platform_device *ofdev, | |
| struct fsl_usb2_platform_data *pdata, | |
| const char *name, int id) | |
| { | |
| struct platform_device *pdev; | |
| const struct resource *res = ofdev->resource; | |
| unsigned int num = ofdev->num_resources; | |
| int retval; | |
| pdev = platform_device_alloc(name, id); | |
| if (!pdev) { | |
| retval = -ENOMEM; | |
| goto error; | |
| } | |
| pdev->dev.parent = &ofdev->dev; | |
| pdev->dev.coherent_dma_mask = ofdev->dev.coherent_dma_mask; | |
| if (!pdev->dev.dma_mask) | |
| pdev->dev.dma_mask = &ofdev->dev.coherent_dma_mask; | |
| else | |
| dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); | |
| retval = platform_device_add_data(pdev, pdata, sizeof(*pdata)); | |
| if (retval) | |
| goto error; | |
| if (num) { | |
| retval = platform_device_add_resources(pdev, res, num); | |
| if (retval) | |
| goto error; | |
| } | |
| retval = platform_device_add(pdev); | |
| if (retval) | |
| goto error; | |
| return pdev; | |
| error: | |
| platform_device_put(pdev); | |
| return ERR_PTR(retval); | |
| } | |
| static const struct of_device_id fsl_usb2_mph_dr_of_match[]; | |
| static enum fsl_usb2_controller_ver usb_get_ver_info(struct device_node *np) | |
| { | |
| enum fsl_usb2_controller_ver ver = FSL_USB_VER_NONE; | |
| /* | |
| * returns 1 for usb controller version 1.6 | |
| * returns 2 for usb controller version 2.2 | |
| * returns 3 for usb controller version 2.4 | |
| * returns 4 for usb controller version 2.5 | |
| * returns 0 otherwise | |
| */ | |
| if (of_device_is_compatible(np, "fsl-usb2-dr")) { | |
| if (of_device_is_compatible(np, "fsl-usb2-dr-v1.6")) | |
| ver = FSL_USB_VER_1_6; | |
| else if (of_device_is_compatible(np, "fsl-usb2-dr-v2.2")) | |
| ver = FSL_USB_VER_2_2; | |
| else if (of_device_is_compatible(np, "fsl-usb2-dr-v2.4")) | |
| ver = FSL_USB_VER_2_4; | |
| else if (of_device_is_compatible(np, "fsl-usb2-dr-v2.5")) | |
| ver = FSL_USB_VER_2_5; | |
| else /* for previous controller versions */ | |
| ver = FSL_USB_VER_OLD; | |
| if (ver > FSL_USB_VER_NONE) | |
| return ver; | |
| } | |
| if (of_device_is_compatible(np, "fsl,mpc5121-usb2-dr")) | |
| return FSL_USB_VER_OLD; | |
| if (of_device_is_compatible(np, "fsl-usb2-mph")) { | |
| if (of_device_is_compatible(np, "fsl-usb2-mph-v1.6")) | |
| ver = FSL_USB_VER_1_6; | |
| else if (of_device_is_compatible(np, "fsl-usb2-mph-v2.2")) | |
| ver = FSL_USB_VER_2_2; | |
| else if (of_device_is_compatible(np, "fsl-usb2-mph-v2.4")) | |
| ver = FSL_USB_VER_2_4; | |
| else if (of_device_is_compatible(np, "fsl-usb2-mph-v2.5")) | |
| ver = FSL_USB_VER_2_5; | |
| else /* for previous controller versions */ | |
| ver = FSL_USB_VER_OLD; | |
| } | |
| return ver; | |
| } | |
| static int fsl_usb2_mph_dr_of_probe(struct platform_device *ofdev) | |
| { | |
| struct device_node *np = ofdev->dev.of_node; | |
| struct platform_device *usb_dev; | |
| struct fsl_usb2_platform_data data, *pdata; | |
| struct fsl_usb2_dev_data *dev_data; | |
| const struct of_device_id *match; | |
| const unsigned char *prop; | |
| static unsigned int idx; | |
| int i; | |
| if (!of_device_is_available(np)) | |
| return -ENODEV; | |
| match = of_match_device(fsl_usb2_mph_dr_of_match, &ofdev->dev); | |
| if (!match) | |
| return -ENODEV; | |
| pdata = &data; | |
| if (match->data) | |
| memcpy(pdata, match->data, sizeof(data)); | |
| else | |
| memset(pdata, 0, sizeof(data)); | |
| dev_data = get_dr_mode_data(np); | |
| if (of_device_is_compatible(np, "fsl-usb2-mph")) { | |
| if (of_get_property(np, "port0", NULL)) | |
| pdata->port_enables |= FSL_USB2_PORT0_ENABLED; | |
| if (of_get_property(np, "port1", NULL)) | |
| pdata->port_enables |= FSL_USB2_PORT1_ENABLED; | |
| pdata->operating_mode = FSL_USB2_MPH_HOST; | |
| } else { | |
| if (of_get_property(np, "fsl,invert-drvvbus", NULL)) | |
| pdata->invert_drvvbus = 1; | |
| if (of_get_property(np, "fsl,invert-pwr-fault", NULL)) | |
| pdata->invert_pwr_fault = 1; | |
| /* setup mode selected in the device tree */ | |
| pdata->operating_mode = dev_data->op_mode; | |
| } | |
| prop = of_get_property(np, "phy_type", NULL); | |
| pdata->phy_mode = determine_usb_phy(prop); | |
| pdata->controller_ver = usb_get_ver_info(np); | |
| /* Activate Erratum by reading property in device tree */ | |
| pdata->has_fsl_erratum_a007792 = | |
| of_property_read_bool(np, "fsl,usb-erratum-a007792"); | |
| pdata->has_fsl_erratum_a005275 = | |
| of_property_read_bool(np, "fsl,usb-erratum-a005275"); | |
| pdata->has_fsl_erratum_a005697 = | |
| of_property_read_bool(np, "fsl,usb_erratum-a005697"); | |
| /* | |
| * Determine whether phy_clk_valid needs to be checked | |
| * by reading property in device tree | |
| */ | |
| pdata->check_phy_clk_valid = | |
| of_property_read_bool(np, "phy-clk-valid"); | |
| if (pdata->have_sysif_regs) { | |
| if (pdata->controller_ver == FSL_USB_VER_NONE) { | |
| dev_warn(&ofdev->dev, "Could not get controller version\n"); | |
| return -ENODEV; | |
| } | |
| } | |
| for (i = 0; i < ARRAY_SIZE(dev_data->drivers); i++) { | |
| if (!dev_data->drivers[i]) | |
| continue; | |
| usb_dev = fsl_usb2_device_register(ofdev, pdata, | |
| dev_data->drivers[i], idx); | |
| if (IS_ERR(usb_dev)) { | |
| dev_err(&ofdev->dev, "Can't register usb device\n"); | |
| return PTR_ERR(usb_dev); | |
| } | |
| } | |
| idx++; | |
| return 0; | |
| } | |
| static int __unregister_subdev(struct device *dev, void *d) | |
| { | |
| platform_device_unregister(to_platform_device(dev)); | |
| return 0; | |
| } | |
| static int fsl_usb2_mph_dr_of_remove(struct platform_device *ofdev) | |
| { | |
| device_for_each_child(&ofdev->dev, NULL, __unregister_subdev); | |
| return 0; | |
| } | |
| #ifdef CONFIG_PPC_MPC512x | |
| #define USBGENCTRL 0x200 /* NOTE: big endian */ | |
| #define GC_WU_INT_CLR (1 << 5) /* Wakeup int clear */ | |
| #define GC_ULPI_SEL (1 << 4) /* ULPI i/f select (usb0 only)*/ | |
| #define GC_PPP (1 << 3) /* Inv. Port Power Polarity */ | |
| #define GC_PFP (1 << 2) /* Inv. Power Fault Polarity */ | |
| #define GC_WU_ULPI_EN (1 << 1) /* Wakeup on ULPI event */ | |
| #define GC_WU_IE (1 << 1) /* Wakeup interrupt enable */ | |
| #define ISIPHYCTRL 0x204 /* NOTE: big endian */ | |
| #define PHYCTRL_PHYE (1 << 4) /* On-chip UTMI PHY enable */ | |
| #define PHYCTRL_BSENH (1 << 3) /* Bit Stuff Enable High */ | |
| #define PHYCTRL_BSEN (1 << 2) /* Bit Stuff Enable */ | |
| #define PHYCTRL_LSFE (1 << 1) /* Line State Filter Enable */ | |
| #define PHYCTRL_PXE (1 << 0) /* PHY oscillator enable */ | |
| int fsl_usb2_mpc5121_init(struct platform_device *pdev) | |
| { | |
| struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev); | |
| struct clk *clk; | |
| int err; | |
| clk = devm_clk_get(pdev->dev.parent, "ipg"); | |
| if (IS_ERR(clk)) { | |
| dev_err(&pdev->dev, "failed to get clk\n"); | |
| return PTR_ERR(clk); | |
| } | |
| err = clk_prepare_enable(clk); | |
| if (err) { | |
| dev_err(&pdev->dev, "failed to enable clk\n"); | |
| return err; | |
| } | |
| pdata->clk = clk; | |
| if (pdata->phy_mode == FSL_USB2_PHY_UTMI_WIDE) { | |
| u32 reg = 0; | |
| if (pdata->invert_drvvbus) | |
| reg |= GC_PPP; | |
| if (pdata->invert_pwr_fault) | |
| reg |= GC_PFP; | |
| out_be32(pdata->regs + ISIPHYCTRL, PHYCTRL_PHYE | PHYCTRL_PXE); | |
| out_be32(pdata->regs + USBGENCTRL, reg); | |
| } | |
| return 0; | |
| } | |
| static void fsl_usb2_mpc5121_exit(struct platform_device *pdev) | |
| { | |
| struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev); | |
| pdata->regs = NULL; | |
| if (pdata->clk) | |
| clk_disable_unprepare(pdata->clk); | |
| } | |
| static struct fsl_usb2_platform_data fsl_usb2_mpc5121_pd = { | |
| .big_endian_desc = 1, | |
| .big_endian_mmio = 1, | |
| .es = 1, | |
| .have_sysif_regs = 0, | |
| .le_setup_buf = 1, | |
| .init = fsl_usb2_mpc5121_init, | |
| .exit = fsl_usb2_mpc5121_exit, | |
| }; | |
| #endif /* CONFIG_PPC_MPC512x */ | |
| static struct fsl_usb2_platform_data fsl_usb2_mpc8xxx_pd = { | |
| .have_sysif_regs = 1, | |
| }; | |
| static const struct of_device_id fsl_usb2_mph_dr_of_match[] = { | |
| { .compatible = "fsl-usb2-mph", .data = &fsl_usb2_mpc8xxx_pd, }, | |
| { .compatible = "fsl-usb2-dr", .data = &fsl_usb2_mpc8xxx_pd, }, | |
| #ifdef CONFIG_PPC_MPC512x | |
| { .compatible = "fsl,mpc5121-usb2-dr", .data = &fsl_usb2_mpc5121_pd, }, | |
| #endif | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(of, fsl_usb2_mph_dr_of_match); | |
| static struct platform_driver fsl_usb2_mph_dr_driver = { | |
| .driver = { | |
| .name = "fsl-usb2-mph-dr", | |
| .of_match_table = fsl_usb2_mph_dr_of_match, | |
| }, | |
| .probe = fsl_usb2_mph_dr_of_probe, | |
| .remove = fsl_usb2_mph_dr_of_remove, | |
| }; | |
| module_platform_driver(fsl_usb2_mph_dr_driver); | |
| MODULE_DESCRIPTION("FSL MPH DR OF devices driver"); | |
| MODULE_AUTHOR("Anatolij Gustschin <agust@denx.de>"); | |
| MODULE_LICENSE("GPL"); |