| /* | |
| * Wireless Host Controller (WHC) driver. | |
| * | |
| * Copyright (C) 2007 Cambridge Silicon Radio Ltd. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License version | |
| * 2 as published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/init.h> | |
| #include <linux/module.h> | |
| #include <linux/uwb/umc.h> | |
| #include "../../wusbcore/wusbhc.h" | |
| #include "whcd.h" | |
| /* | |
| * One time initialization. | |
| * | |
| * Nothing to do here. | |
| */ | |
| static int whc_reset(struct usb_hcd *usb_hcd) | |
| { | |
| return 0; | |
| } | |
| /* | |
| * Start the wireless host controller. | |
| * | |
| * Start device notification. | |
| * | |
| * Put hc into run state, set DNTS parameters. | |
| */ | |
| static int whc_start(struct usb_hcd *usb_hcd) | |
| { | |
| struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); | |
| struct whc *whc = wusbhc_to_whc(wusbhc); | |
| u8 bcid; | |
| int ret; | |
| mutex_lock(&wusbhc->mutex); | |
| le_writel(WUSBINTR_GEN_CMD_DONE | |
| | WUSBINTR_HOST_ERR | |
| | WUSBINTR_ASYNC_SCHED_SYNCED | |
| | WUSBINTR_DNTS_INT | |
| | WUSBINTR_ERR_INT | |
| | WUSBINTR_INT, | |
| whc->base + WUSBINTR); | |
| /* set cluster ID */ | |
| bcid = wusb_cluster_id_get(); | |
| ret = whc_set_cluster_id(whc, bcid); | |
| if (ret < 0) | |
| goto out; | |
| wusbhc->cluster_id = bcid; | |
| /* start HC */ | |
| whc_write_wusbcmd(whc, WUSBCMD_RUN, WUSBCMD_RUN); | |
| usb_hcd->uses_new_polling = 1; | |
| set_bit(HCD_FLAG_POLL_RH, &usb_hcd->flags); | |
| usb_hcd->state = HC_STATE_RUNNING; | |
| out: | |
| mutex_unlock(&wusbhc->mutex); | |
| return ret; | |
| } | |
| /* | |
| * Stop the wireless host controller. | |
| * | |
| * Stop device notification. | |
| * | |
| * Wait for pending transfer to stop? Put hc into stop state? | |
| */ | |
| static void whc_stop(struct usb_hcd *usb_hcd) | |
| { | |
| struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); | |
| struct whc *whc = wusbhc_to_whc(wusbhc); | |
| mutex_lock(&wusbhc->mutex); | |
| /* stop HC */ | |
| le_writel(0, whc->base + WUSBINTR); | |
| whc_write_wusbcmd(whc, WUSBCMD_RUN, 0); | |
| whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS, | |
| WUSBSTS_HCHALTED, WUSBSTS_HCHALTED, | |
| 100, "HC to halt"); | |
| wusb_cluster_id_put(wusbhc->cluster_id); | |
| mutex_unlock(&wusbhc->mutex); | |
| } | |
| static int whc_get_frame_number(struct usb_hcd *usb_hcd) | |
| { | |
| /* Frame numbers are not applicable to WUSB. */ | |
| return -ENOSYS; | |
| } | |
| /* | |
| * Queue an URB to the ASL or PZL | |
| */ | |
| static int whc_urb_enqueue(struct usb_hcd *usb_hcd, struct urb *urb, | |
| gfp_t mem_flags) | |
| { | |
| struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); | |
| struct whc *whc = wusbhc_to_whc(wusbhc); | |
| int ret; | |
| switch (usb_pipetype(urb->pipe)) { | |
| case PIPE_INTERRUPT: | |
| ret = pzl_urb_enqueue(whc, urb, mem_flags); | |
| break; | |
| case PIPE_ISOCHRONOUS: | |
| dev_err(&whc->umc->dev, "isochronous transfers unsupported\n"); | |
| ret = -ENOTSUPP; | |
| break; | |
| case PIPE_CONTROL: | |
| case PIPE_BULK: | |
| default: | |
| ret = asl_urb_enqueue(whc, urb, mem_flags); | |
| break; | |
| } | |
| return ret; | |
| } | |
| /* | |
| * Remove a queued URB from the ASL or PZL. | |
| */ | |
| static int whc_urb_dequeue(struct usb_hcd *usb_hcd, struct urb *urb, int status) | |
| { | |
| struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); | |
| struct whc *whc = wusbhc_to_whc(wusbhc); | |
| int ret; | |
| switch (usb_pipetype(urb->pipe)) { | |
| case PIPE_INTERRUPT: | |
| ret = pzl_urb_dequeue(whc, urb, status); | |
| break; | |
| case PIPE_ISOCHRONOUS: | |
| ret = -ENOTSUPP; | |
| break; | |
| case PIPE_CONTROL: | |
| case PIPE_BULK: | |
| default: | |
| ret = asl_urb_dequeue(whc, urb, status); | |
| break; | |
| } | |
| return ret; | |
| } | |
| /* | |
| * Wait for all URBs to the endpoint to be completed, then delete the | |
| * qset. | |
| */ | |
| static void whc_endpoint_disable(struct usb_hcd *usb_hcd, | |
| struct usb_host_endpoint *ep) | |
| { | |
| struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); | |
| struct whc *whc = wusbhc_to_whc(wusbhc); | |
| struct whc_qset *qset; | |
| qset = ep->hcpriv; | |
| if (qset) { | |
| ep->hcpriv = NULL; | |
| if (usb_endpoint_xfer_bulk(&ep->desc) | |
| || usb_endpoint_xfer_control(&ep->desc)) | |
| asl_qset_delete(whc, qset); | |
| else | |
| pzl_qset_delete(whc, qset); | |
| } | |
| } | |
| static void whc_endpoint_reset(struct usb_hcd *usb_hcd, | |
| struct usb_host_endpoint *ep) | |
| { | |
| struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); | |
| struct whc *whc = wusbhc_to_whc(wusbhc); | |
| struct whc_qset *qset; | |
| unsigned long flags; | |
| spin_lock_irqsave(&whc->lock, flags); | |
| qset = ep->hcpriv; | |
| if (qset) { | |
| qset->remove = 1; | |
| qset->reset = 1; | |
| if (usb_endpoint_xfer_bulk(&ep->desc) | |
| || usb_endpoint_xfer_control(&ep->desc)) | |
| queue_work(whc->workqueue, &whc->async_work); | |
| else | |
| queue_work(whc->workqueue, &whc->periodic_work); | |
| } | |
| spin_unlock_irqrestore(&whc->lock, flags); | |
| } | |
| static const struct hc_driver whc_hc_driver = { | |
| .description = "whci-hcd", | |
| .product_desc = "Wireless host controller", | |
| .hcd_priv_size = sizeof(struct whc) - sizeof(struct usb_hcd), | |
| .irq = whc_int_handler, | |
| .flags = HCD_USB2, | |
| .reset = whc_reset, | |
| .start = whc_start, | |
| .stop = whc_stop, | |
| .get_frame_number = whc_get_frame_number, | |
| .urb_enqueue = whc_urb_enqueue, | |
| .urb_dequeue = whc_urb_dequeue, | |
| .endpoint_disable = whc_endpoint_disable, | |
| .endpoint_reset = whc_endpoint_reset, | |
| .hub_status_data = wusbhc_rh_status_data, | |
| .hub_control = wusbhc_rh_control, | |
| .start_port_reset = wusbhc_rh_start_port_reset, | |
| }; | |
| static int whc_probe(struct umc_dev *umc) | |
| { | |
| int ret; | |
| struct usb_hcd *usb_hcd; | |
| struct wusbhc *wusbhc; | |
| struct whc *whc; | |
| struct device *dev = &umc->dev; | |
| usb_hcd = usb_create_hcd(&whc_hc_driver, dev, "whci"); | |
| if (usb_hcd == NULL) { | |
| dev_err(dev, "unable to create hcd\n"); | |
| return -ENOMEM; | |
| } | |
| usb_hcd->wireless = 1; | |
| usb_hcd->self.sg_tablesize = 2048; /* somewhat arbitrary */ | |
| wusbhc = usb_hcd_to_wusbhc(usb_hcd); | |
| whc = wusbhc_to_whc(wusbhc); | |
| whc->umc = umc; | |
| ret = whc_init(whc); | |
| if (ret) | |
| goto error_whc_init; | |
| wusbhc->dev = dev; | |
| wusbhc->uwb_rc = uwb_rc_get_by_grandpa(umc->dev.parent); | |
| if (!wusbhc->uwb_rc) { | |
| ret = -ENODEV; | |
| dev_err(dev, "cannot get radio controller\n"); | |
| goto error_uwb_rc; | |
| } | |
| if (whc->n_devices > USB_MAXCHILDREN) { | |
| dev_warn(dev, "USB_MAXCHILDREN too low for WUSB adapter (%u ports)\n", | |
| whc->n_devices); | |
| wusbhc->ports_max = USB_MAXCHILDREN; | |
| } else | |
| wusbhc->ports_max = whc->n_devices; | |
| wusbhc->mmcies_max = whc->n_mmc_ies; | |
| wusbhc->start = whc_wusbhc_start; | |
| wusbhc->stop = whc_wusbhc_stop; | |
| wusbhc->mmcie_add = whc_mmcie_add; | |
| wusbhc->mmcie_rm = whc_mmcie_rm; | |
| wusbhc->dev_info_set = whc_dev_info_set; | |
| wusbhc->bwa_set = whc_bwa_set; | |
| wusbhc->set_num_dnts = whc_set_num_dnts; | |
| wusbhc->set_ptk = whc_set_ptk; | |
| wusbhc->set_gtk = whc_set_gtk; | |
| ret = wusbhc_create(wusbhc); | |
| if (ret) | |
| goto error_wusbhc_create; | |
| ret = usb_add_hcd(usb_hcd, whc->umc->irq, IRQF_SHARED); | |
| if (ret) { | |
| dev_err(dev, "cannot add HCD: %d\n", ret); | |
| goto error_usb_add_hcd; | |
| } | |
| device_wakeup_enable(usb_hcd->self.controller); | |
| ret = wusbhc_b_create(wusbhc); | |
| if (ret) { | |
| dev_err(dev, "WUSBHC phase B setup failed: %d\n", ret); | |
| goto error_wusbhc_b_create; | |
| } | |
| whc_dbg_init(whc); | |
| return 0; | |
| error_wusbhc_b_create: | |
| usb_remove_hcd(usb_hcd); | |
| error_usb_add_hcd: | |
| wusbhc_destroy(wusbhc); | |
| error_wusbhc_create: | |
| uwb_rc_put(wusbhc->uwb_rc); | |
| error_uwb_rc: | |
| whc_clean_up(whc); | |
| error_whc_init: | |
| usb_put_hcd(usb_hcd); | |
| return ret; | |
| } | |
| static void whc_remove(struct umc_dev *umc) | |
| { | |
| struct usb_hcd *usb_hcd = dev_get_drvdata(&umc->dev); | |
| struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); | |
| struct whc *whc = wusbhc_to_whc(wusbhc); | |
| if (usb_hcd) { | |
| whc_dbg_clean_up(whc); | |
| wusbhc_b_destroy(wusbhc); | |
| usb_remove_hcd(usb_hcd); | |
| wusbhc_destroy(wusbhc); | |
| uwb_rc_put(wusbhc->uwb_rc); | |
| whc_clean_up(whc); | |
| usb_put_hcd(usb_hcd); | |
| } | |
| } | |
| static struct umc_driver whci_hc_driver = { | |
| .name = "whci-hcd", | |
| .cap_id = UMC_CAP_ID_WHCI_WUSB_HC, | |
| .probe = whc_probe, | |
| .remove = whc_remove, | |
| }; | |
| static int __init whci_hc_driver_init(void) | |
| { | |
| return umc_driver_register(&whci_hc_driver); | |
| } | |
| module_init(whci_hc_driver_init); | |
| static void __exit whci_hc_driver_exit(void) | |
| { | |
| umc_driver_unregister(&whci_hc_driver); | |
| } | |
| module_exit(whci_hc_driver_exit); | |
| /* PCI device ID's that we handle (so it gets loaded) */ | |
| static struct pci_device_id __used whci_hcd_id_table[] = { | |
| { PCI_DEVICE_CLASS(PCI_CLASS_WIRELESS_WHCI, ~0) }, | |
| { /* empty last entry */ } | |
| }; | |
| MODULE_DEVICE_TABLE(pci, whci_hcd_id_table); | |
| MODULE_DESCRIPTION("WHCI Wireless USB host controller driver"); | |
| MODULE_AUTHOR("Cambridge Silicon Radio Ltd."); | |
| MODULE_LICENSE("GPL"); |