| /* | |
| * xhci-plat.c - xHCI host controller driver platform Bus Glue. | |
| * | |
| * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com | |
| * Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de> | |
| * | |
| * A lot of code borrowed from the Linux xHCI driver. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * version 2 as published by the Free Software Foundation. | |
| */ | |
| #include <linux/clk.h> | |
| #include <linux/dma-mapping.h> | |
| #include <linux/module.h> | |
| #include <linux/pci.h> | |
| #include <linux/of.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/usb/phy.h> | |
| #include <linux/slab.h> | |
| #include <linux/acpi.h> | |
| #include "xhci.h" | |
| #include "xhci-plat.h" | |
| #include "xhci-mvebu.h" | |
| #include "xhci-rcar.h" | |
| static struct hc_driver __read_mostly xhci_plat_hc_driver; | |
| static int xhci_plat_setup(struct usb_hcd *hcd); | |
| static int xhci_plat_start(struct usb_hcd *hcd); | |
| static const struct xhci_driver_overrides xhci_plat_overrides __initconst = { | |
| .extra_priv_size = sizeof(struct xhci_plat_priv), | |
| .reset = xhci_plat_setup, | |
| .start = xhci_plat_start, | |
| }; | |
| static void xhci_priv_plat_start(struct usb_hcd *hcd) | |
| { | |
| struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd); | |
| if (priv->plat_start) | |
| priv->plat_start(hcd); | |
| } | |
| static int xhci_priv_init_quirk(struct usb_hcd *hcd) | |
| { | |
| struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd); | |
| if (!priv->init_quirk) | |
| return 0; | |
| return priv->init_quirk(hcd); | |
| } | |
| static int xhci_priv_resume_quirk(struct usb_hcd *hcd) | |
| { | |
| struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd); | |
| if (!priv->resume_quirk) | |
| return 0; | |
| return priv->resume_quirk(hcd); | |
| } | |
| static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci) | |
| { | |
| /* | |
| * As of now platform drivers don't provide MSI support so we ensure | |
| * here that the generic code does not try to make a pci_dev from our | |
| * dev struct in order to setup MSI | |
| */ | |
| xhci->quirks |= XHCI_PLAT; | |
| } | |
| /* called during probe() after chip reset completes */ | |
| static int xhci_plat_setup(struct usb_hcd *hcd) | |
| { | |
| int ret; | |
| ret = xhci_priv_init_quirk(hcd); | |
| if (ret) | |
| return ret; | |
| return xhci_gen_setup(hcd, xhci_plat_quirks); | |
| } | |
| static int xhci_plat_start(struct usb_hcd *hcd) | |
| { | |
| xhci_priv_plat_start(hcd); | |
| return xhci_run(hcd); | |
| } | |
| #ifdef CONFIG_OF | |
| static const struct xhci_plat_priv xhci_plat_marvell_armada = { | |
| .init_quirk = xhci_mvebu_mbus_init_quirk, | |
| }; | |
| static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen2 = { | |
| .firmware_name = XHCI_RCAR_FIRMWARE_NAME_V1, | |
| .init_quirk = xhci_rcar_init_quirk, | |
| .plat_start = xhci_rcar_start, | |
| .resume_quirk = xhci_rcar_resume_quirk, | |
| }; | |
| static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen3 = { | |
| .init_quirk = xhci_rcar_init_quirk, | |
| .plat_start = xhci_rcar_start, | |
| .resume_quirk = xhci_rcar_resume_quirk, | |
| }; | |
| static const struct of_device_id usb_xhci_of_match[] = { | |
| { | |
| .compatible = "generic-xhci", | |
| }, { | |
| .compatible = "xhci-platform", | |
| }, { | |
| .compatible = "marvell,armada-375-xhci", | |
| .data = &xhci_plat_marvell_armada, | |
| }, { | |
| .compatible = "marvell,armada-380-xhci", | |
| .data = &xhci_plat_marvell_armada, | |
| }, { | |
| .compatible = "renesas,xhci-r8a7790", | |
| .data = &xhci_plat_renesas_rcar_gen2, | |
| }, { | |
| .compatible = "renesas,xhci-r8a7791", | |
| .data = &xhci_plat_renesas_rcar_gen2, | |
| }, { | |
| .compatible = "renesas,xhci-r8a7793", | |
| .data = &xhci_plat_renesas_rcar_gen2, | |
| }, { | |
| .compatible = "renesas,xhci-r8a7795", | |
| .data = &xhci_plat_renesas_rcar_gen3, | |
| }, { | |
| .compatible = "renesas,xhci-r8a7796", | |
| .data = &xhci_plat_renesas_rcar_gen3, | |
| }, { | |
| .compatible = "renesas,rcar-gen2-xhci", | |
| .data = &xhci_plat_renesas_rcar_gen2, | |
| }, { | |
| .compatible = "renesas,rcar-gen3-xhci", | |
| .data = &xhci_plat_renesas_rcar_gen3, | |
| }, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(of, usb_xhci_of_match); | |
| #endif | |
| static int xhci_plat_probe(struct platform_device *pdev) | |
| { | |
| const struct of_device_id *match; | |
| const struct hc_driver *driver; | |
| struct device *sysdev; | |
| struct xhci_hcd *xhci; | |
| struct resource *res; | |
| struct usb_hcd *hcd; | |
| struct clk *clk; | |
| int ret; | |
| int irq; | |
| if (usb_disabled()) | |
| return -ENODEV; | |
| driver = &xhci_plat_hc_driver; | |
| irq = platform_get_irq(pdev, 0); | |
| if (irq < 0) | |
| return irq; | |
| /* | |
| * sysdev must point to a device that is known to the system firmware | |
| * or PCI hardware. We handle these three cases here: | |
| * 1. xhci_plat comes from firmware | |
| * 2. xhci_plat is child of a device from firmware (dwc3-plat) | |
| * 3. xhci_plat is grandchild of a pci device (dwc3-pci) | |
| */ | |
| for (sysdev = &pdev->dev; sysdev; sysdev = sysdev->parent) { | |
| if (is_of_node(sysdev->fwnode) || | |
| is_acpi_device_node(sysdev->fwnode)) | |
| break; | |
| #ifdef CONFIG_PCI | |
| else if (sysdev->bus == &pci_bus_type) | |
| break; | |
| #endif | |
| } | |
| if (!sysdev) | |
| sysdev = &pdev->dev; | |
| /* Try to set 64-bit DMA first */ | |
| if (WARN_ON(!sysdev->dma_mask)) | |
| /* Platform did not initialize dma_mask */ | |
| ret = dma_coerce_mask_and_coherent(sysdev, | |
| DMA_BIT_MASK(64)); | |
| else | |
| ret = dma_set_mask_and_coherent(sysdev, DMA_BIT_MASK(64)); | |
| /* If seting 64-bit DMA mask fails, fall back to 32-bit DMA mask */ | |
| if (ret) { | |
| ret = dma_set_mask_and_coherent(sysdev, DMA_BIT_MASK(32)); | |
| if (ret) | |
| return ret; | |
| } | |
| pm_runtime_set_active(&pdev->dev); | |
| pm_runtime_enable(&pdev->dev); | |
| pm_runtime_get_noresume(&pdev->dev); | |
| hcd = __usb_create_hcd(driver, sysdev, &pdev->dev, | |
| dev_name(&pdev->dev), NULL); | |
| if (!hcd) { | |
| ret = -ENOMEM; | |
| goto disable_runtime; | |
| } | |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| hcd->regs = devm_ioremap_resource(&pdev->dev, res); | |
| if (IS_ERR(hcd->regs)) { | |
| ret = PTR_ERR(hcd->regs); | |
| goto put_hcd; | |
| } | |
| hcd->rsrc_start = res->start; | |
| hcd->rsrc_len = resource_size(res); | |
| /* | |
| * Not all platforms have a clk so it is not an error if the | |
| * clock does not exists. | |
| */ | |
| clk = devm_clk_get(&pdev->dev, NULL); | |
| if (!IS_ERR(clk)) { | |
| ret = clk_prepare_enable(clk); | |
| if (ret) | |
| goto put_hcd; | |
| } else if (PTR_ERR(clk) == -EPROBE_DEFER) { | |
| ret = -EPROBE_DEFER; | |
| goto put_hcd; | |
| } | |
| xhci = hcd_to_xhci(hcd); | |
| match = of_match_node(usb_xhci_of_match, pdev->dev.of_node); | |
| if (match) { | |
| const struct xhci_plat_priv *priv_match = match->data; | |
| struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd); | |
| /* Just copy data for now */ | |
| if (priv_match) | |
| *priv = *priv_match; | |
| } | |
| device_wakeup_enable(hcd->self.controller); | |
| xhci->clk = clk; | |
| xhci->main_hcd = hcd; | |
| xhci->shared_hcd = __usb_create_hcd(driver, sysdev, &pdev->dev, | |
| dev_name(&pdev->dev), hcd); | |
| if (!xhci->shared_hcd) { | |
| ret = -ENOMEM; | |
| goto disable_clk; | |
| } | |
| if (device_property_read_bool(sysdev, "usb3-lpm-capable")) | |
| xhci->quirks |= XHCI_LPM_SUPPORT; | |
| if (device_property_read_bool(&pdev->dev, "quirk-broken-port-ped")) | |
| xhci->quirks |= XHCI_BROKEN_PORT_PED; | |
| hcd->usb_phy = devm_usb_get_phy_by_phandle(sysdev, "usb-phy", 0); | |
| if (IS_ERR(hcd->usb_phy)) { | |
| ret = PTR_ERR(hcd->usb_phy); | |
| if (ret == -EPROBE_DEFER) | |
| goto put_usb3_hcd; | |
| hcd->usb_phy = NULL; | |
| } else { | |
| ret = usb_phy_init(hcd->usb_phy); | |
| if (ret) | |
| goto put_usb3_hcd; | |
| } | |
| ret = usb_add_hcd(hcd, irq, IRQF_SHARED); | |
| if (ret) | |
| goto disable_usb_phy; | |
| if (HCC_MAX_PSA(xhci->hcc_params) >= 4) | |
| xhci->shared_hcd->can_do_streams = 1; | |
| ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED); | |
| if (ret) | |
| goto dealloc_usb2_hcd; | |
| device_enable_async_suspend(&pdev->dev); | |
| pm_runtime_put_noidle(&pdev->dev); | |
| /* | |
| * Prevent runtime pm from being on as default, users should enable | |
| * runtime pm using power/control in sysfs. | |
| */ | |
| pm_runtime_forbid(&pdev->dev); | |
| return 0; | |
| dealloc_usb2_hcd: | |
| usb_remove_hcd(hcd); | |
| disable_usb_phy: | |
| usb_phy_shutdown(hcd->usb_phy); | |
| put_usb3_hcd: | |
| usb_put_hcd(xhci->shared_hcd); | |
| disable_clk: | |
| if (!IS_ERR(clk)) | |
| clk_disable_unprepare(clk); | |
| put_hcd: | |
| usb_put_hcd(hcd); | |
| disable_runtime: | |
| pm_runtime_put_noidle(&pdev->dev); | |
| pm_runtime_disable(&pdev->dev); | |
| return ret; | |
| } | |
| static int xhci_plat_remove(struct platform_device *dev) | |
| { | |
| struct usb_hcd *hcd = platform_get_drvdata(dev); | |
| struct xhci_hcd *xhci = hcd_to_xhci(hcd); | |
| struct clk *clk = xhci->clk; | |
| xhci->xhc_state |= XHCI_STATE_REMOVING; | |
| usb_remove_hcd(xhci->shared_hcd); | |
| usb_phy_shutdown(hcd->usb_phy); | |
| usb_remove_hcd(hcd); | |
| usb_put_hcd(xhci->shared_hcd); | |
| if (!IS_ERR(clk)) | |
| clk_disable_unprepare(clk); | |
| usb_put_hcd(hcd); | |
| pm_runtime_set_suspended(&dev->dev); | |
| pm_runtime_disable(&dev->dev); | |
| return 0; | |
| } | |
| static int __maybe_unused xhci_plat_suspend(struct device *dev) | |
| { | |
| struct usb_hcd *hcd = dev_get_drvdata(dev); | |
| struct xhci_hcd *xhci = hcd_to_xhci(hcd); | |
| int ret; | |
| /* | |
| * xhci_suspend() needs `do_wakeup` to know whether host is allowed | |
| * to do wakeup during suspend. Since xhci_plat_suspend is currently | |
| * only designed for system suspend, device_may_wakeup() is enough | |
| * to dertermine whether host is allowed to do wakeup. Need to | |
| * reconsider this when xhci_plat_suspend enlarges its scope, e.g., | |
| * also applies to runtime suspend. | |
| */ | |
| ret = xhci_suspend(xhci, device_may_wakeup(dev)); | |
| if (!device_may_wakeup(dev) && !IS_ERR(xhci->clk)) | |
| clk_disable_unprepare(xhci->clk); | |
| return ret; | |
| } | |
| static int __maybe_unused xhci_plat_resume(struct device *dev) | |
| { | |
| struct usb_hcd *hcd = dev_get_drvdata(dev); | |
| struct xhci_hcd *xhci = hcd_to_xhci(hcd); | |
| int ret; | |
| if (!device_may_wakeup(dev) && !IS_ERR(xhci->clk)) | |
| clk_prepare_enable(xhci->clk); | |
| ret = xhci_priv_resume_quirk(hcd); | |
| if (ret) | |
| return ret; | |
| return xhci_resume(xhci, 0); | |
| } | |
| static int __maybe_unused xhci_plat_runtime_suspend(struct device *dev) | |
| { | |
| struct usb_hcd *hcd = dev_get_drvdata(dev); | |
| struct xhci_hcd *xhci = hcd_to_xhci(hcd); | |
| return xhci_suspend(xhci, true); | |
| } | |
| static int __maybe_unused xhci_plat_runtime_resume(struct device *dev) | |
| { | |
| struct usb_hcd *hcd = dev_get_drvdata(dev); | |
| struct xhci_hcd *xhci = hcd_to_xhci(hcd); | |
| return xhci_resume(xhci, 0); | |
| } | |
| static const struct dev_pm_ops xhci_plat_pm_ops = { | |
| SET_SYSTEM_SLEEP_PM_OPS(xhci_plat_suspend, xhci_plat_resume) | |
| SET_RUNTIME_PM_OPS(xhci_plat_runtime_suspend, | |
| xhci_plat_runtime_resume, | |
| NULL) | |
| }; | |
| static const struct acpi_device_id usb_xhci_acpi_match[] = { | |
| /* XHCI-compliant USB Controller */ | |
| { "PNP0D10", }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(acpi, usb_xhci_acpi_match); | |
| static struct platform_driver usb_xhci_driver = { | |
| .probe = xhci_plat_probe, | |
| .remove = xhci_plat_remove, | |
| .shutdown = usb_hcd_platform_shutdown, | |
| .driver = { | |
| .name = "xhci-hcd", | |
| .pm = &xhci_plat_pm_ops, | |
| .of_match_table = of_match_ptr(usb_xhci_of_match), | |
| .acpi_match_table = ACPI_PTR(usb_xhci_acpi_match), | |
| }, | |
| }; | |
| MODULE_ALIAS("platform:xhci-hcd"); | |
| static int __init xhci_plat_init(void) | |
| { | |
| xhci_init_driver(&xhci_plat_hc_driver, &xhci_plat_overrides); | |
| return platform_driver_register(&usb_xhci_driver); | |
| } | |
| module_init(xhci_plat_init); | |
| static void __exit xhci_plat_exit(void) | |
| { | |
| platform_driver_unregister(&usb_xhci_driver); | |
| } | |
| module_exit(xhci_plat_exit); | |
| MODULE_DESCRIPTION("xHCI Platform Host Controller Driver"); | |
| MODULE_LICENSE("GPL"); |