| /* | |
| * Copyright (C) 2003-2008 Takahiro Hirofuchi | |
| * | |
| * This is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, | |
| * USA. | |
| */ | |
| #include <asm/byteorder.h> | |
| #include <linux/kthread.h> | |
| #include <linux/usb.h> | |
| #include <linux/usb/hcd.h> | |
| #include "usbip_common.h" | |
| #include "stub.h" | |
| static int is_clear_halt_cmd(struct urb *urb) | |
| { | |
| struct usb_ctrlrequest *req; | |
| req = (struct usb_ctrlrequest *) urb->setup_packet; | |
| return (req->bRequest == USB_REQ_CLEAR_FEATURE) && | |
| (req->bRequestType == USB_RECIP_ENDPOINT) && | |
| (req->wValue == USB_ENDPOINT_HALT); | |
| } | |
| static int is_set_interface_cmd(struct urb *urb) | |
| { | |
| struct usb_ctrlrequest *req; | |
| req = (struct usb_ctrlrequest *) urb->setup_packet; | |
| return (req->bRequest == USB_REQ_SET_INTERFACE) && | |
| (req->bRequestType == USB_RECIP_INTERFACE); | |
| } | |
| static int is_set_configuration_cmd(struct urb *urb) | |
| { | |
| struct usb_ctrlrequest *req; | |
| req = (struct usb_ctrlrequest *) urb->setup_packet; | |
| return (req->bRequest == USB_REQ_SET_CONFIGURATION) && | |
| (req->bRequestType == USB_RECIP_DEVICE); | |
| } | |
| static int is_reset_device_cmd(struct urb *urb) | |
| { | |
| struct usb_ctrlrequest *req; | |
| __u16 value; | |
| __u16 index; | |
| req = (struct usb_ctrlrequest *) urb->setup_packet; | |
| value = le16_to_cpu(req->wValue); | |
| index = le16_to_cpu(req->wIndex); | |
| if ((req->bRequest == USB_REQ_SET_FEATURE) && | |
| (req->bRequestType == USB_RT_PORT) && | |
| (value == USB_PORT_FEAT_RESET)) { | |
| usbip_dbg_stub_rx("reset_device_cmd, port %u\n", index); | |
| return 1; | |
| } else | |
| return 0; | |
| } | |
| static int tweak_clear_halt_cmd(struct urb *urb) | |
| { | |
| struct usb_ctrlrequest *req; | |
| int target_endp; | |
| int target_dir; | |
| int target_pipe; | |
| int ret; | |
| req = (struct usb_ctrlrequest *) urb->setup_packet; | |
| /* | |
| * The stalled endpoint is specified in the wIndex value. The endpoint | |
| * of the urb is the target of this clear_halt request (i.e., control | |
| * endpoint). | |
| */ | |
| target_endp = le16_to_cpu(req->wIndex) & 0x000f; | |
| /* the stalled endpoint direction is IN or OUT?. USB_DIR_IN is 0x80. */ | |
| target_dir = le16_to_cpu(req->wIndex) & 0x0080; | |
| if (target_dir) | |
| target_pipe = usb_rcvctrlpipe(urb->dev, target_endp); | |
| else | |
| target_pipe = usb_sndctrlpipe(urb->dev, target_endp); | |
| ret = usb_clear_halt(urb->dev, target_pipe); | |
| if (ret < 0) | |
| dev_err(&urb->dev->dev, | |
| "usb_clear_halt error: devnum %d endp %d ret %d\n", | |
| urb->dev->devnum, target_endp, ret); | |
| else | |
| dev_info(&urb->dev->dev, | |
| "usb_clear_halt done: devnum %d endp %d\n", | |
| urb->dev->devnum, target_endp); | |
| return ret; | |
| } | |
| static int tweak_set_interface_cmd(struct urb *urb) | |
| { | |
| struct usb_ctrlrequest *req; | |
| __u16 alternate; | |
| __u16 interface; | |
| int ret; | |
| req = (struct usb_ctrlrequest *) urb->setup_packet; | |
| alternate = le16_to_cpu(req->wValue); | |
| interface = le16_to_cpu(req->wIndex); | |
| usbip_dbg_stub_rx("set_interface: inf %u alt %u\n", | |
| interface, alternate); | |
| ret = usb_set_interface(urb->dev, interface, alternate); | |
| if (ret < 0) | |
| dev_err(&urb->dev->dev, | |
| "usb_set_interface error: inf %u alt %u ret %d\n", | |
| interface, alternate, ret); | |
| else | |
| dev_info(&urb->dev->dev, | |
| "usb_set_interface done: inf %u alt %u\n", | |
| interface, alternate); | |
| return ret; | |
| } | |
| static int tweak_set_configuration_cmd(struct urb *urb) | |
| { | |
| struct stub_priv *priv = (struct stub_priv *) urb->context; | |
| struct stub_device *sdev = priv->sdev; | |
| struct usb_ctrlrequest *req; | |
| __u16 config; | |
| int err; | |
| req = (struct usb_ctrlrequest *) urb->setup_packet; | |
| config = le16_to_cpu(req->wValue); | |
| err = usb_set_configuration(sdev->udev, config); | |
| if (err && err != -ENODEV) | |
| dev_err(&sdev->udev->dev, "can't set config #%d, error %d\n", | |
| config, err); | |
| return 0; | |
| } | |
| static int tweak_reset_device_cmd(struct urb *urb) | |
| { | |
| struct stub_priv *priv = (struct stub_priv *) urb->context; | |
| struct stub_device *sdev = priv->sdev; | |
| dev_info(&urb->dev->dev, "usb_queue_reset_device\n"); | |
| if (usb_lock_device_for_reset(sdev->udev, NULL) < 0) { | |
| dev_err(&urb->dev->dev, "could not obtain lock to reset device\n"); | |
| return 0; | |
| } | |
| usb_reset_device(sdev->udev); | |
| usb_unlock_device(sdev->udev); | |
| return 0; | |
| } | |
| /* | |
| * clear_halt, set_interface, and set_configuration require special tricks. | |
| */ | |
| static void tweak_special_requests(struct urb *urb) | |
| { | |
| if (!urb || !urb->setup_packet) | |
| return; | |
| if (usb_pipetype(urb->pipe) != PIPE_CONTROL) | |
| return; | |
| if (is_clear_halt_cmd(urb)) | |
| /* tweak clear_halt */ | |
| tweak_clear_halt_cmd(urb); | |
| else if (is_set_interface_cmd(urb)) | |
| /* tweak set_interface */ | |
| tweak_set_interface_cmd(urb); | |
| else if (is_set_configuration_cmd(urb)) | |
| /* tweak set_configuration */ | |
| tweak_set_configuration_cmd(urb); | |
| else if (is_reset_device_cmd(urb)) | |
| tweak_reset_device_cmd(urb); | |
| else | |
| usbip_dbg_stub_rx("no need to tweak\n"); | |
| } | |
| /* | |
| * stub_recv_unlink() unlinks the URB by a call to usb_unlink_urb(). | |
| * By unlinking the urb asynchronously, stub_rx can continuously | |
| * process coming urbs. Even if the urb is unlinked, its completion | |
| * handler will be called and stub_tx will send a return pdu. | |
| * | |
| * See also comments about unlinking strategy in vhci_hcd.c. | |
| */ | |
| static int stub_recv_cmd_unlink(struct stub_device *sdev, | |
| struct usbip_header *pdu) | |
| { | |
| int ret; | |
| unsigned long flags; | |
| struct stub_priv *priv; | |
| spin_lock_irqsave(&sdev->priv_lock, flags); | |
| list_for_each_entry(priv, &sdev->priv_init, list) { | |
| if (priv->seqnum != pdu->u.cmd_unlink.seqnum) | |
| continue; | |
| dev_info(&priv->urb->dev->dev, "unlink urb %p\n", | |
| priv->urb); | |
| /* | |
| * This matched urb is not completed yet (i.e., be in | |
| * flight in usb hcd hardware/driver). Now we are | |
| * cancelling it. The unlinking flag means that we are | |
| * now not going to return the normal result pdu of a | |
| * submission request, but going to return a result pdu | |
| * of the unlink request. | |
| */ | |
| priv->unlinking = 1; | |
| /* | |
| * In the case that unlinking flag is on, prev->seqnum | |
| * is changed from the seqnum of the cancelling urb to | |
| * the seqnum of the unlink request. This will be used | |
| * to make the result pdu of the unlink request. | |
| */ | |
| priv->seqnum = pdu->base.seqnum; | |
| spin_unlock_irqrestore(&sdev->priv_lock, flags); | |
| /* | |
| * usb_unlink_urb() is now out of spinlocking to avoid | |
| * spinlock recursion since stub_complete() is | |
| * sometimes called in this context but not in the | |
| * interrupt context. If stub_complete() is executed | |
| * before we call usb_unlink_urb(), usb_unlink_urb() | |
| * will return an error value. In this case, stub_tx | |
| * will return the result pdu of this unlink request | |
| * though submission is completed and actual unlinking | |
| * is not executed. OK? | |
| */ | |
| /* In the above case, urb->status is not -ECONNRESET, | |
| * so a driver in a client host will know the failure | |
| * of the unlink request ? | |
| */ | |
| ret = usb_unlink_urb(priv->urb); | |
| if (ret != -EINPROGRESS) | |
| dev_err(&priv->urb->dev->dev, | |
| "failed to unlink a urb %p, ret %d\n", | |
| priv->urb, ret); | |
| return 0; | |
| } | |
| usbip_dbg_stub_rx("seqnum %d is not pending\n", | |
| pdu->u.cmd_unlink.seqnum); | |
| /* | |
| * The urb of the unlink target is not found in priv_init queue. It was | |
| * already completed and its results is/was going to be sent by a | |
| * CMD_RET pdu. In this case, usb_unlink_urb() is not needed. We only | |
| * return the completeness of this unlink request to vhci_hcd. | |
| */ | |
| stub_enqueue_ret_unlink(sdev, pdu->base.seqnum, 0); | |
| spin_unlock_irqrestore(&sdev->priv_lock, flags); | |
| return 0; | |
| } | |
| static int valid_request(struct stub_device *sdev, struct usbip_header *pdu) | |
| { | |
| struct usbip_device *ud = &sdev->ud; | |
| int valid = 0; | |
| if (pdu->base.devid == sdev->devid) { | |
| spin_lock_irq(&ud->lock); | |
| if (ud->status == SDEV_ST_USED) { | |
| /* A request is valid. */ | |
| valid = 1; | |
| } | |
| spin_unlock_irq(&ud->lock); | |
| } | |
| return valid; | |
| } | |
| static struct stub_priv *stub_priv_alloc(struct stub_device *sdev, | |
| struct usbip_header *pdu) | |
| { | |
| struct stub_priv *priv; | |
| struct usbip_device *ud = &sdev->ud; | |
| unsigned long flags; | |
| spin_lock_irqsave(&sdev->priv_lock, flags); | |
| priv = kmem_cache_zalloc(stub_priv_cache, GFP_ATOMIC); | |
| if (!priv) { | |
| dev_err(&sdev->udev->dev, "alloc stub_priv\n"); | |
| spin_unlock_irqrestore(&sdev->priv_lock, flags); | |
| usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC); | |
| return NULL; | |
| } | |
| priv->seqnum = pdu->base.seqnum; | |
| priv->sdev = sdev; | |
| /* | |
| * After a stub_priv is linked to a list_head, | |
| * our error handler can free allocated data. | |
| */ | |
| list_add_tail(&priv->list, &sdev->priv_init); | |
| spin_unlock_irqrestore(&sdev->priv_lock, flags); | |
| return priv; | |
| } | |
| static int get_pipe(struct stub_device *sdev, int epnum, int dir) | |
| { | |
| struct usb_device *udev = sdev->udev; | |
| struct usb_host_endpoint *ep; | |
| struct usb_endpoint_descriptor *epd = NULL; | |
| if (dir == USBIP_DIR_IN) | |
| ep = udev->ep_in[epnum & 0x7f]; | |
| else | |
| ep = udev->ep_out[epnum & 0x7f]; | |
| if (!ep) { | |
| dev_err(&sdev->udev->dev, "no such endpoint?, %d\n", | |
| epnum); | |
| BUG(); | |
| } | |
| epd = &ep->desc; | |
| if (usb_endpoint_xfer_control(epd)) { | |
| if (dir == USBIP_DIR_OUT) | |
| return usb_sndctrlpipe(udev, epnum); | |
| else | |
| return usb_rcvctrlpipe(udev, epnum); | |
| } | |
| if (usb_endpoint_xfer_bulk(epd)) { | |
| if (dir == USBIP_DIR_OUT) | |
| return usb_sndbulkpipe(udev, epnum); | |
| else | |
| return usb_rcvbulkpipe(udev, epnum); | |
| } | |
| if (usb_endpoint_xfer_int(epd)) { | |
| if (dir == USBIP_DIR_OUT) | |
| return usb_sndintpipe(udev, epnum); | |
| else | |
| return usb_rcvintpipe(udev, epnum); | |
| } | |
| if (usb_endpoint_xfer_isoc(epd)) { | |
| if (dir == USBIP_DIR_OUT) | |
| return usb_sndisocpipe(udev, epnum); | |
| else | |
| return usb_rcvisocpipe(udev, epnum); | |
| } | |
| /* NOT REACHED */ | |
| dev_err(&sdev->udev->dev, "get pipe, epnum %d\n", epnum); | |
| return 0; | |
| } | |
| static void masking_bogus_flags(struct urb *urb) | |
| { | |
| int xfertype; | |
| struct usb_device *dev; | |
| struct usb_host_endpoint *ep; | |
| int is_out; | |
| unsigned int allowed; | |
| if (!urb || urb->hcpriv || !urb->complete) | |
| return; | |
| dev = urb->dev; | |
| if ((!dev) || (dev->state < USB_STATE_UNAUTHENTICATED)) | |
| return; | |
| ep = (usb_pipein(urb->pipe) ? dev->ep_in : dev->ep_out) | |
| [usb_pipeendpoint(urb->pipe)]; | |
| if (!ep) | |
| return; | |
| xfertype = usb_endpoint_type(&ep->desc); | |
| if (xfertype == USB_ENDPOINT_XFER_CONTROL) { | |
| struct usb_ctrlrequest *setup = | |
| (struct usb_ctrlrequest *) urb->setup_packet; | |
| if (!setup) | |
| return; | |
| is_out = !(setup->bRequestType & USB_DIR_IN) || | |
| !setup->wLength; | |
| } else { | |
| is_out = usb_endpoint_dir_out(&ep->desc); | |
| } | |
| /* enforce simple/standard policy */ | |
| allowed = (URB_NO_TRANSFER_DMA_MAP | URB_NO_INTERRUPT | | |
| URB_DIR_MASK | URB_FREE_BUFFER); | |
| switch (xfertype) { | |
| case USB_ENDPOINT_XFER_BULK: | |
| if (is_out) | |
| allowed |= URB_ZERO_PACKET; | |
| /* FALLTHROUGH */ | |
| case USB_ENDPOINT_XFER_CONTROL: | |
| allowed |= URB_NO_FSBR; /* only affects UHCI */ | |
| /* FALLTHROUGH */ | |
| default: /* all non-iso endpoints */ | |
| if (!is_out) | |
| allowed |= URB_SHORT_NOT_OK; | |
| break; | |
| case USB_ENDPOINT_XFER_ISOC: | |
| allowed |= URB_ISO_ASAP; | |
| break; | |
| } | |
| urb->transfer_flags &= allowed; | |
| } | |
| static void stub_recv_cmd_submit(struct stub_device *sdev, | |
| struct usbip_header *pdu) | |
| { | |
| int ret; | |
| struct stub_priv *priv; | |
| struct usbip_device *ud = &sdev->ud; | |
| struct usb_device *udev = sdev->udev; | |
| int pipe = get_pipe(sdev, pdu->base.ep, pdu->base.direction); | |
| priv = stub_priv_alloc(sdev, pdu); | |
| if (!priv) | |
| return; | |
| /* setup a urb */ | |
| if (usb_pipeisoc(pipe)) | |
| priv->urb = usb_alloc_urb(pdu->u.cmd_submit.number_of_packets, | |
| GFP_KERNEL); | |
| else | |
| priv->urb = usb_alloc_urb(0, GFP_KERNEL); | |
| if (!priv->urb) { | |
| usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC); | |
| return; | |
| } | |
| /* allocate urb transfer buffer, if needed */ | |
| if (pdu->u.cmd_submit.transfer_buffer_length > 0) { | |
| priv->urb->transfer_buffer = | |
| kzalloc(pdu->u.cmd_submit.transfer_buffer_length, | |
| GFP_KERNEL); | |
| if (!priv->urb->transfer_buffer) { | |
| usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC); | |
| return; | |
| } | |
| } | |
| /* copy urb setup packet */ | |
| priv->urb->setup_packet = kmemdup(&pdu->u.cmd_submit.setup, 8, | |
| GFP_KERNEL); | |
| if (!priv->urb->setup_packet) { | |
| dev_err(&udev->dev, "allocate setup_packet\n"); | |
| usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC); | |
| return; | |
| } | |
| /* set other members from the base header of pdu */ | |
| priv->urb->context = (void *) priv; | |
| priv->urb->dev = udev; | |
| priv->urb->pipe = pipe; | |
| priv->urb->complete = stub_complete; | |
| usbip_pack_pdu(pdu, priv->urb, USBIP_CMD_SUBMIT, 0); | |
| if (usbip_recv_xbuff(ud, priv->urb) < 0) | |
| return; | |
| if (usbip_recv_iso(ud, priv->urb) < 0) | |
| return; | |
| /* no need to submit an intercepted request, but harmless? */ | |
| tweak_special_requests(priv->urb); | |
| masking_bogus_flags(priv->urb); | |
| /* urb is now ready to submit */ | |
| ret = usb_submit_urb(priv->urb, GFP_KERNEL); | |
| if (ret == 0) | |
| usbip_dbg_stub_rx("submit urb ok, seqnum %u\n", | |
| pdu->base.seqnum); | |
| else { | |
| dev_err(&udev->dev, "submit_urb error, %d\n", ret); | |
| usbip_dump_header(pdu); | |
| usbip_dump_urb(priv->urb); | |
| /* | |
| * Pessimistic. | |
| * This connection will be discarded. | |
| */ | |
| usbip_event_add(ud, SDEV_EVENT_ERROR_SUBMIT); | |
| } | |
| usbip_dbg_stub_rx("Leave\n"); | |
| } | |
| /* recv a pdu */ | |
| static void stub_rx_pdu(struct usbip_device *ud) | |
| { | |
| int ret; | |
| struct usbip_header pdu; | |
| struct stub_device *sdev = container_of(ud, struct stub_device, ud); | |
| struct device *dev = &sdev->udev->dev; | |
| usbip_dbg_stub_rx("Enter\n"); | |
| memset(&pdu, 0, sizeof(pdu)); | |
| /* receive a pdu header */ | |
| ret = usbip_recv(ud->tcp_socket, &pdu, sizeof(pdu)); | |
| if (ret != sizeof(pdu)) { | |
| dev_err(dev, "recv a header, %d\n", ret); | |
| usbip_event_add(ud, SDEV_EVENT_ERROR_TCP); | |
| return; | |
| } | |
| usbip_header_correct_endian(&pdu, 0); | |
| if (usbip_dbg_flag_stub_rx) | |
| usbip_dump_header(&pdu); | |
| if (!valid_request(sdev, &pdu)) { | |
| dev_err(dev, "recv invalid request\n"); | |
| usbip_event_add(ud, SDEV_EVENT_ERROR_TCP); | |
| return; | |
| } | |
| switch (pdu.base.command) { | |
| case USBIP_CMD_UNLINK: | |
| stub_recv_cmd_unlink(sdev, &pdu); | |
| break; | |
| case USBIP_CMD_SUBMIT: | |
| stub_recv_cmd_submit(sdev, &pdu); | |
| break; | |
| default: | |
| /* NOTREACHED */ | |
| dev_err(dev, "unknown pdu\n"); | |
| usbip_event_add(ud, SDEV_EVENT_ERROR_TCP); | |
| break; | |
| } | |
| } | |
| int stub_rx_loop(void *data) | |
| { | |
| struct usbip_device *ud = data; | |
| while (!kthread_should_stop()) { | |
| if (usbip_event_happened(ud)) | |
| break; | |
| stub_rx_pdu(ud); | |
| } | |
| return 0; | |
| } |