| * Maxim 1027/1029/1031 Analog to Digital Converter (ADC) |
| |
| Required properties: |
| - compatible: Should be "maxim,max1027" or "maxim,max1029" or "maxim,max1031" |
| - reg: SPI chip select number for the device |
| - interrupt-parent: phandle to the parent interrupt controller |
| see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt |
| - interrupts: IRQ line for the ADC |
| see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt |
| |
| Recommended properties: |
| - spi-max-frequency: Definition as per |
| Documentation/devicetree/bindings/spi/spi-bus.txt |
| |
| Example: |
| adc@0 { |
| compatible = "maxim,max1027"; |
| reg = <0>; |
| interrupt-parent = <&gpio5>; |
| interrupts = <15 IRQ_TYPE_EDGE_RISING>; |
| spi-max-frequency = <1000000>; |
| }; |
