| /* |
| * Copyright (C) 2017 Pengutronix, Juergen Borleis <kernel@pengutronix.de> |
| * |
| * Partially based on a patch from |
| * Copyright (c) 2014 Stefan Roese <sr@denx.de> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/mdio.h> |
| #include <linux/phy.h> |
| #include <linux/of.h> |
| |
| #include "lan9303.h" |
| |
| /* Generate phy-addr and -reg from the input address */ |
| #define PHY_ADDR(x) ((((x) >> 6) + 0x10) & 0x1f) |
| #define PHY_REG(x) (((x) >> 1) & 0x1f) |
| |
| struct lan9303_mdio { |
| struct mdio_device *device; |
| struct lan9303 chip; |
| }; |
| |
| static void lan9303_mdio_real_write(struct mdio_device *mdio, int reg, u16 val) |
| { |
| mdio->bus->write(mdio->bus, PHY_ADDR(reg), PHY_REG(reg), val); |
| } |
| |
| static int lan9303_mdio_write(void *ctx, uint32_t reg, uint32_t val) |
| { |
| struct lan9303_mdio *sw_dev = (struct lan9303_mdio *)ctx; |
| |
| reg <<= 2; /* reg num to offset */ |
| mutex_lock(&sw_dev->device->bus->mdio_lock); |
| lan9303_mdio_real_write(sw_dev->device, reg, val & 0xffff); |
| lan9303_mdio_real_write(sw_dev->device, reg + 2, (val >> 16) & 0xffff); |
| mutex_unlock(&sw_dev->device->bus->mdio_lock); |
| |
| return 0; |
| } |
| |
| static u16 lan9303_mdio_real_read(struct mdio_device *mdio, int reg) |
| { |
| return mdio->bus->read(mdio->bus, PHY_ADDR(reg), PHY_REG(reg)); |
| } |
| |
| static int lan9303_mdio_read(void *ctx, uint32_t reg, uint32_t *val) |
| { |
| struct lan9303_mdio *sw_dev = (struct lan9303_mdio *)ctx; |
| |
| reg <<= 2; /* reg num to offset */ |
| mutex_lock(&sw_dev->device->bus->mdio_lock); |
| *val = lan9303_mdio_real_read(sw_dev->device, reg); |
| *val |= (lan9303_mdio_real_read(sw_dev->device, reg + 2) << 16); |
| mutex_unlock(&sw_dev->device->bus->mdio_lock); |
| |
| return 0; |
| } |
| |
| int lan9303_mdio_phy_write(struct lan9303 *chip, int phy, int reg, u16 val) |
| { |
| struct lan9303_mdio *sw_dev = dev_get_drvdata(chip->dev); |
| |
| return mdiobus_write_nested(sw_dev->device->bus, phy, reg, val); |
| } |
| |
| int lan9303_mdio_phy_read(struct lan9303 *chip, int phy, int reg) |
| { |
| struct lan9303_mdio *sw_dev = dev_get_drvdata(chip->dev); |
| |
| return mdiobus_read_nested(sw_dev->device->bus, phy, reg); |
| } |
| |
| static const struct lan9303_phy_ops lan9303_mdio_phy_ops = { |
| .phy_read = lan9303_mdio_phy_read, |
| .phy_write = lan9303_mdio_phy_write, |
| }; |
| |
| static const struct regmap_config lan9303_mdio_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 32, |
| .reg_stride = 1, |
| .can_multi_write = true, |
| .max_register = 0x0ff, /* address bits 0..1 are not used */ |
| .reg_format_endian = REGMAP_ENDIAN_LITTLE, |
| |
| .volatile_table = &lan9303_register_set, |
| .wr_table = &lan9303_register_set, |
| .rd_table = &lan9303_register_set, |
| |
| .reg_read = lan9303_mdio_read, |
| .reg_write = lan9303_mdio_write, |
| |
| .cache_type = REGCACHE_NONE, |
| }; |
| |
| static int lan9303_mdio_probe(struct mdio_device *mdiodev) |
| { |
| struct lan9303_mdio *sw_dev; |
| int ret; |
| |
| sw_dev = devm_kzalloc(&mdiodev->dev, sizeof(struct lan9303_mdio), |
| GFP_KERNEL); |
| if (!sw_dev) |
| return -ENOMEM; |
| |
| sw_dev->chip.regmap = devm_regmap_init(&mdiodev->dev, NULL, sw_dev, |
| &lan9303_mdio_regmap_config); |
| if (IS_ERR(sw_dev->chip.regmap)) { |
| ret = PTR_ERR(sw_dev->chip.regmap); |
| dev_err(&mdiodev->dev, "regmap init failed: %d\n", ret); |
| return ret; |
| } |
| |
| /* link forward and backward */ |
| sw_dev->device = mdiodev; |
| dev_set_drvdata(&mdiodev->dev, sw_dev); |
| sw_dev->chip.dev = &mdiodev->dev; |
| |
| sw_dev->chip.ops = &lan9303_mdio_phy_ops; |
| |
| ret = lan9303_probe(&sw_dev->chip, mdiodev->dev.of_node); |
| if (ret != 0) |
| return ret; |
| |
| dev_info(&mdiodev->dev, "LAN9303 MDIO driver loaded successfully\n"); |
| |
| return 0; |
| } |
| |
| static void lan9303_mdio_remove(struct mdio_device *mdiodev) |
| { |
| struct lan9303_mdio *sw_dev = dev_get_drvdata(&mdiodev->dev); |
| |
| if (!sw_dev) |
| return; |
| |
| lan9303_remove(&sw_dev->chip); |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static const struct of_device_id lan9303_mdio_of_match[] = { |
| { .compatible = "smsc,lan9303-mdio" }, |
| { /* sentinel */ }, |
| }; |
| MODULE_DEVICE_TABLE(of, lan9303_mdio_of_match); |
| |
| static struct mdio_driver lan9303_mdio_driver = { |
| .mdiodrv.driver = { |
| .name = "LAN9303_MDIO", |
| .of_match_table = of_match_ptr(lan9303_mdio_of_match), |
| }, |
| .probe = lan9303_mdio_probe, |
| .remove = lan9303_mdio_remove, |
| }; |
| mdio_module_driver(lan9303_mdio_driver); |
| |
| MODULE_AUTHOR("Stefan Roese <sr@denx.de>, Juergen Borleis <kernel@pengutronix.de>"); |
| MODULE_DESCRIPTION("Driver for SMSC/Microchip LAN9303 three port ethernet switch in MDIO managed mode"); |
| MODULE_LICENSE("GPL v2"); |