| /* | |
| * I/O SAPIC support. | |
| * | |
| * Copyright (C) 1999 Intel Corp. | |
| * Copyright (C) 1999 Asit Mallick <asit.k.mallick@intel.com> | |
| * Copyright (C) 2000-2002 J.I. Lee <jung-ik.lee@intel.com> | |
| * Copyright (C) 1999-2000, 2002-2003 Hewlett-Packard Co. | |
| * David Mosberger-Tang <davidm@hpl.hp.com> | |
| * Copyright (C) 1999 VA Linux Systems | |
| * Copyright (C) 1999,2000 Walt Drummond <drummond@valinux.com> | |
| * | |
| * 00/04/19 D. Mosberger Rewritten to mirror more closely the x86 I/O | |
| * APIC code. In particular, we now have separate | |
| * handlers for edge and level triggered | |
| * interrupts. | |
| * 00/10/27 Asit Mallick, Goutham Rao <goutham.rao@intel.com> IRQ vector | |
| * allocation PCI to vector mapping, shared PCI | |
| * interrupts. | |
| * 00/10/27 D. Mosberger Document things a bit more to make them more | |
| * understandable. Clean up much of the old | |
| * IOSAPIC cruft. | |
| * 01/07/27 J.I. Lee PCI irq routing, Platform/Legacy interrupts | |
| * and fixes for ACPI S5(SoftOff) support. | |
| * 02/01/23 J.I. Lee iosapic pgm fixes for PCI irq routing from _PRT | |
| * 02/01/07 E. Focht <efocht@ess.nec.de> Redirectable interrupt | |
| * vectors in iosapic_set_affinity(), | |
| * initializations for /proc/irq/#/smp_affinity | |
| * 02/04/02 P. Diefenbaugh Cleaned up ACPI PCI IRQ routing. | |
| * 02/04/18 J.I. Lee bug fix in iosapic_init_pci_irq | |
| * 02/04/30 J.I. Lee bug fix in find_iosapic to fix ACPI PCI IRQ to | |
| * IOSAPIC mapping error | |
| * 02/07/29 T. Kochi Allocate interrupt vectors dynamically | |
| * 02/08/04 T. Kochi Cleaned up terminology (irq, global system | |
| * interrupt, vector, etc.) | |
| * 02/09/20 D. Mosberger Simplified by taking advantage of ACPI's | |
| * pci_irq code. | |
| * 03/02/19 B. Helgaas Make pcat_compat system-wide, not per-IOSAPIC. | |
| * Remove iosapic_address & gsi_base from | |
| * external interfaces. Rationalize | |
| * __init/__devinit attributes. | |
| * 04/12/04 Ashok Raj <ashok.raj@intel.com> Intel Corporation 2004 | |
| * Updated to work with irq migration necessary | |
| * for CPU Hotplug | |
| */ | |
| /* | |
| * Here is what the interrupt logic between a PCI device and the kernel looks | |
| * like: | |
| * | |
| * (1) A PCI device raises one of the four interrupt pins (INTA, INTB, INTC, | |
| * INTD). The device is uniquely identified by its bus-, and slot-number | |
| * (the function number does not matter here because all functions share | |
| * the same interrupt lines). | |
| * | |
| * (2) The motherboard routes the interrupt line to a pin on a IOSAPIC | |
| * controller. Multiple interrupt lines may have to share the same | |
| * IOSAPIC pin (if they're level triggered and use the same polarity). | |
| * Each interrupt line has a unique Global System Interrupt (GSI) number | |
| * which can be calculated as the sum of the controller's base GSI number | |
| * and the IOSAPIC pin number to which the line connects. | |
| * | |
| * (3) The IOSAPIC uses an internal routing table entries (RTEs) to map the | |
| * IOSAPIC pin into the IA-64 interrupt vector. This interrupt vector is then | |
| * sent to the CPU. | |
| * | |
| * (4) The kernel recognizes an interrupt as an IRQ. The IRQ interface is | |
| * used as architecture-independent interrupt handling mechanism in Linux. | |
| * As an IRQ is a number, we have to have | |
| * IA-64 interrupt vector number <-> IRQ number mapping. On smaller | |
| * systems, we use one-to-one mapping between IA-64 vector and IRQ. A | |
| * platform can implement platform_irq_to_vector(irq) and | |
| * platform_local_vector_to_irq(vector) APIs to differentiate the mapping. | |
| * Please see also arch/ia64/include/asm/hw_irq.h for those APIs. | |
| * | |
| * To sum up, there are three levels of mappings involved: | |
| * | |
| * PCI pin -> global system interrupt (GSI) -> IA-64 vector <-> IRQ | |
| * | |
| * Note: The term "IRQ" is loosely used everywhere in Linux kernel to | |
| * describe interrupts. Now we use "IRQ" only for Linux IRQ's. ISA IRQ | |
| * (isa_irq) is the only exception in this source code. | |
| */ | |
| #include <linux/acpi.h> | |
| #include <linux/init.h> | |
| #include <linux/irq.h> | |
| #include <linux/kernel.h> | |
| #include <linux/list.h> | |
| #include <linux/pci.h> | |
| #include <linux/slab.h> | |
| #include <linux/smp.h> | |
| #include <linux/string.h> | |
| #include <linux/bootmem.h> | |
| #include <asm/delay.h> | |
| #include <asm/hw_irq.h> | |
| #include <asm/io.h> | |
| #include <asm/iosapic.h> | |
| #include <asm/machvec.h> | |
| #include <asm/processor.h> | |
| #include <asm/ptrace.h> | |
| #undef DEBUG_INTERRUPT_ROUTING | |
| #ifdef DEBUG_INTERRUPT_ROUTING | |
| #define DBG(fmt...) printk(fmt) | |
| #else | |
| #define DBG(fmt...) | |
| #endif | |
| static DEFINE_SPINLOCK(iosapic_lock); | |
| /* | |
| * These tables map IA-64 vectors to the IOSAPIC pin that generates this | |
| * vector. | |
| */ | |
| #define NO_REF_RTE 0 | |
| static struct iosapic { | |
| char __iomem *addr; /* base address of IOSAPIC */ | |
| unsigned int gsi_base; /* GSI base */ | |
| unsigned short num_rte; /* # of RTEs on this IOSAPIC */ | |
| int rtes_inuse; /* # of RTEs in use on this IOSAPIC */ | |
| #ifdef CONFIG_NUMA | |
| unsigned short node; /* numa node association via pxm */ | |
| #endif | |
| spinlock_t lock; /* lock for indirect reg access */ | |
| } iosapic_lists[NR_IOSAPICS]; | |
| struct iosapic_rte_info { | |
| struct list_head rte_list; /* RTEs sharing the same vector */ | |
| char rte_index; /* IOSAPIC RTE index */ | |
| int refcnt; /* reference counter */ | |
| struct iosapic *iosapic; | |
| } ____cacheline_aligned; | |
| static struct iosapic_intr_info { | |
| struct list_head rtes; /* RTEs using this vector (empty => | |
| * not an IOSAPIC interrupt) */ | |
| int count; /* # of registered RTEs */ | |
| u32 low32; /* current value of low word of | |
| * Redirection table entry */ | |
| unsigned int dest; /* destination CPU physical ID */ | |
| unsigned char dmode : 3; /* delivery mode (see iosapic.h) */ | |
| unsigned char polarity: 1; /* interrupt polarity | |
| * (see iosapic.h) */ | |
| unsigned char trigger : 1; /* trigger mode (see iosapic.h) */ | |
| } iosapic_intr_info[NR_IRQS]; | |
| static unsigned char pcat_compat; /* 8259 compatibility flag */ | |
| static inline void | |
| iosapic_write(struct iosapic *iosapic, unsigned int reg, u32 val) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(&iosapic->lock, flags); | |
| __iosapic_write(iosapic->addr, reg, val); | |
| spin_unlock_irqrestore(&iosapic->lock, flags); | |
| } | |
| /* | |
| * Find an IOSAPIC associated with a GSI | |
| */ | |
| static inline int | |
| find_iosapic (unsigned int gsi) | |
| { | |
| int i; | |
| for (i = 0; i < NR_IOSAPICS; i++) { | |
| if ((unsigned) (gsi - iosapic_lists[i].gsi_base) < | |
| iosapic_lists[i].num_rte) | |
| return i; | |
| } | |
| return -1; | |
| } | |
| static inline int __gsi_to_irq(unsigned int gsi) | |
| { | |
| int irq; | |
| struct iosapic_intr_info *info; | |
| struct iosapic_rte_info *rte; | |
| for (irq = 0; irq < NR_IRQS; irq++) { | |
| info = &iosapic_intr_info[irq]; | |
| list_for_each_entry(rte, &info->rtes, rte_list) | |
| if (rte->iosapic->gsi_base + rte->rte_index == gsi) | |
| return irq; | |
| } | |
| return -1; | |
| } | |
| int | |
| gsi_to_irq (unsigned int gsi) | |
| { | |
| unsigned long flags; | |
| int irq; | |
| spin_lock_irqsave(&iosapic_lock, flags); | |
| irq = __gsi_to_irq(gsi); | |
| spin_unlock_irqrestore(&iosapic_lock, flags); | |
| return irq; | |
| } | |
| static struct iosapic_rte_info *find_rte(unsigned int irq, unsigned int gsi) | |
| { | |
| struct iosapic_rte_info *rte; | |
| list_for_each_entry(rte, &iosapic_intr_info[irq].rtes, rte_list) | |
| if (rte->iosapic->gsi_base + rte->rte_index == gsi) | |
| return rte; | |
| return NULL; | |
| } | |
| static void | |
| set_rte (unsigned int gsi, unsigned int irq, unsigned int dest, int mask) | |
| { | |
| unsigned long pol, trigger, dmode; | |
| u32 low32, high32; | |
| int rte_index; | |
| char redir; | |
| struct iosapic_rte_info *rte; | |
| ia64_vector vector = irq_to_vector(irq); | |
| DBG(KERN_DEBUG"IOSAPIC: routing vector %d to 0x%x\n", vector, dest); | |
| rte = find_rte(irq, gsi); | |
| if (!rte) | |
| return; /* not an IOSAPIC interrupt */ | |
| rte_index = rte->rte_index; | |
| pol = iosapic_intr_info[irq].polarity; | |
| trigger = iosapic_intr_info[irq].trigger; | |
| dmode = iosapic_intr_info[irq].dmode; | |
| redir = (dmode == IOSAPIC_LOWEST_PRIORITY) ? 1 : 0; | |
| #ifdef CONFIG_SMP | |
| set_irq_affinity_info(irq, (int)(dest & 0xffff), redir); | |
| #endif | |
| low32 = ((pol << IOSAPIC_POLARITY_SHIFT) | | |
| (trigger << IOSAPIC_TRIGGER_SHIFT) | | |
| (dmode << IOSAPIC_DELIVERY_SHIFT) | | |
| ((mask ? 1 : 0) << IOSAPIC_MASK_SHIFT) | | |
| vector); | |
| /* dest contains both id and eid */ | |
| high32 = (dest << IOSAPIC_DEST_SHIFT); | |
| iosapic_write(rte->iosapic, IOSAPIC_RTE_HIGH(rte_index), high32); | |
| iosapic_write(rte->iosapic, IOSAPIC_RTE_LOW(rte_index), low32); | |
| iosapic_intr_info[irq].low32 = low32; | |
| iosapic_intr_info[irq].dest = dest; | |
| } | |
| static void | |
| iosapic_nop (struct irq_data *data) | |
| { | |
| /* do nothing... */ | |
| } | |
| #ifdef CONFIG_KEXEC | |
| void | |
| kexec_disable_iosapic(void) | |
| { | |
| struct iosapic_intr_info *info; | |
| struct iosapic_rte_info *rte; | |
| ia64_vector vec; | |
| int irq; | |
| for (irq = 0; irq < NR_IRQS; irq++) { | |
| info = &iosapic_intr_info[irq]; | |
| vec = irq_to_vector(irq); | |
| list_for_each_entry(rte, &info->rtes, | |
| rte_list) { | |
| iosapic_write(rte->iosapic, | |
| IOSAPIC_RTE_LOW(rte->rte_index), | |
| IOSAPIC_MASK|vec); | |
| iosapic_eoi(rte->iosapic->addr, vec); | |
| } | |
| } | |
| } | |
| #endif | |
| static void | |
| mask_irq (struct irq_data *data) | |
| { | |
| unsigned int irq = data->irq; | |
| u32 low32; | |
| int rte_index; | |
| struct iosapic_rte_info *rte; | |
| if (!iosapic_intr_info[irq].count) | |
| return; /* not an IOSAPIC interrupt! */ | |
| /* set only the mask bit */ | |
| low32 = iosapic_intr_info[irq].low32 |= IOSAPIC_MASK; | |
| list_for_each_entry(rte, &iosapic_intr_info[irq].rtes, rte_list) { | |
| rte_index = rte->rte_index; | |
| iosapic_write(rte->iosapic, IOSAPIC_RTE_LOW(rte_index), low32); | |
| } | |
| } | |
| static void | |
| unmask_irq (struct irq_data *data) | |
| { | |
| unsigned int irq = data->irq; | |
| u32 low32; | |
| int rte_index; | |
| struct iosapic_rte_info *rte; | |
| if (!iosapic_intr_info[irq].count) | |
| return; /* not an IOSAPIC interrupt! */ | |
| low32 = iosapic_intr_info[irq].low32 &= ~IOSAPIC_MASK; | |
| list_for_each_entry(rte, &iosapic_intr_info[irq].rtes, rte_list) { | |
| rte_index = rte->rte_index; | |
| iosapic_write(rte->iosapic, IOSAPIC_RTE_LOW(rte_index), low32); | |
| } | |
| } | |
| static int | |
| iosapic_set_affinity(struct irq_data *data, const struct cpumask *mask, | |
| bool force) | |
| { | |
| #ifdef CONFIG_SMP | |
| unsigned int irq = data->irq; | |
| u32 high32, low32; | |
| int cpu, dest, rte_index; | |
| int redir = (irq & IA64_IRQ_REDIRECTED) ? 1 : 0; | |
| struct iosapic_rte_info *rte; | |
| struct iosapic *iosapic; | |
| irq &= (~IA64_IRQ_REDIRECTED); | |
| cpu = cpumask_first_and(cpu_online_mask, mask); | |
| if (cpu >= nr_cpu_ids) | |
| return -1; | |
| if (irq_prepare_move(irq, cpu)) | |
| return -1; | |
| dest = cpu_physical_id(cpu); | |
| if (!iosapic_intr_info[irq].count) | |
| return -1; /* not an IOSAPIC interrupt */ | |
| set_irq_affinity_info(irq, dest, redir); | |
| /* dest contains both id and eid */ | |
| high32 = dest << IOSAPIC_DEST_SHIFT; | |
| low32 = iosapic_intr_info[irq].low32 & ~(7 << IOSAPIC_DELIVERY_SHIFT); | |
| if (redir) | |
| /* change delivery mode to lowest priority */ | |
| low32 |= (IOSAPIC_LOWEST_PRIORITY << IOSAPIC_DELIVERY_SHIFT); | |
| else | |
| /* change delivery mode to fixed */ | |
| low32 |= (IOSAPIC_FIXED << IOSAPIC_DELIVERY_SHIFT); | |
| low32 &= IOSAPIC_VECTOR_MASK; | |
| low32 |= irq_to_vector(irq); | |
| iosapic_intr_info[irq].low32 = low32; | |
| iosapic_intr_info[irq].dest = dest; | |
| list_for_each_entry(rte, &iosapic_intr_info[irq].rtes, rte_list) { | |
| iosapic = rte->iosapic; | |
| rte_index = rte->rte_index; | |
| iosapic_write(iosapic, IOSAPIC_RTE_HIGH(rte_index), high32); | |
| iosapic_write(iosapic, IOSAPIC_RTE_LOW(rte_index), low32); | |
| } | |
| #endif | |
| return 0; | |
| } | |
| /* | |
| * Handlers for level-triggered interrupts. | |
| */ | |
| static unsigned int | |
| iosapic_startup_level_irq (struct irq_data *data) | |
| { | |
| unmask_irq(data); | |
| return 0; | |
| } | |
| static void | |
| iosapic_unmask_level_irq (struct irq_data *data) | |
| { | |
| unsigned int irq = data->irq; | |
| ia64_vector vec = irq_to_vector(irq); | |
| struct iosapic_rte_info *rte; | |
| int do_unmask_irq = 0; | |
| irq_complete_move(irq); | |
| if (unlikely(irqd_is_setaffinity_pending(data))) { | |
| do_unmask_irq = 1; | |
| mask_irq(data); | |
| } else | |
| unmask_irq(data); | |
| list_for_each_entry(rte, &iosapic_intr_info[irq].rtes, rte_list) | |
| iosapic_eoi(rte->iosapic->addr, vec); | |
| if (unlikely(do_unmask_irq)) { | |
| irq_move_masked_irq(data); | |
| unmask_irq(data); | |
| } | |
| } | |
| #define iosapic_shutdown_level_irq mask_irq | |
| #define iosapic_enable_level_irq unmask_irq | |
| #define iosapic_disable_level_irq mask_irq | |
| #define iosapic_ack_level_irq iosapic_nop | |
| static struct irq_chip irq_type_iosapic_level = { | |
| .name = "IO-SAPIC-level", | |
| .irq_startup = iosapic_startup_level_irq, | |
| .irq_shutdown = iosapic_shutdown_level_irq, | |
| .irq_enable = iosapic_enable_level_irq, | |
| .irq_disable = iosapic_disable_level_irq, | |
| .irq_ack = iosapic_ack_level_irq, | |
| .irq_mask = mask_irq, | |
| .irq_unmask = iosapic_unmask_level_irq, | |
| .irq_set_affinity = iosapic_set_affinity | |
| }; | |
| /* | |
| * Handlers for edge-triggered interrupts. | |
| */ | |
| static unsigned int | |
| iosapic_startup_edge_irq (struct irq_data *data) | |
| { | |
| unmask_irq(data); | |
| /* | |
| * IOSAPIC simply drops interrupts pended while the | |
| * corresponding pin was masked, so we can't know if an | |
| * interrupt is pending already. Let's hope not... | |
| */ | |
| return 0; | |
| } | |
| static void | |
| iosapic_ack_edge_irq (struct irq_data *data) | |
| { | |
| irq_complete_move(data->irq); | |
| irq_move_irq(data); | |
| } | |
| #define iosapic_enable_edge_irq unmask_irq | |
| #define iosapic_disable_edge_irq iosapic_nop | |
| static struct irq_chip irq_type_iosapic_edge = { | |
| .name = "IO-SAPIC-edge", | |
| .irq_startup = iosapic_startup_edge_irq, | |
| .irq_shutdown = iosapic_disable_edge_irq, | |
| .irq_enable = iosapic_enable_edge_irq, | |
| .irq_disable = iosapic_disable_edge_irq, | |
| .irq_ack = iosapic_ack_edge_irq, | |
| .irq_mask = mask_irq, | |
| .irq_unmask = unmask_irq, | |
| .irq_set_affinity = iosapic_set_affinity | |
| }; | |
| static unsigned int | |
| iosapic_version (char __iomem *addr) | |
| { | |
| /* | |
| * IOSAPIC Version Register return 32 bit structure like: | |
| * { | |
| * unsigned int version : 8; | |
| * unsigned int reserved1 : 8; | |
| * unsigned int max_redir : 8; | |
| * unsigned int reserved2 : 8; | |
| * } | |
| */ | |
| return __iosapic_read(addr, IOSAPIC_VERSION); | |
| } | |
| static int iosapic_find_sharable_irq(unsigned long trigger, unsigned long pol) | |
| { | |
| int i, irq = -ENOSPC, min_count = -1; | |
| struct iosapic_intr_info *info; | |
| /* | |
| * shared vectors for edge-triggered interrupts are not | |
| * supported yet | |
| */ | |
| if (trigger == IOSAPIC_EDGE) | |
| return -EINVAL; | |
| for (i = 0; i < NR_IRQS; i++) { | |
| info = &iosapic_intr_info[i]; | |
| if (info->trigger == trigger && info->polarity == pol && | |
| (info->dmode == IOSAPIC_FIXED || | |
| info->dmode == IOSAPIC_LOWEST_PRIORITY) && | |
| can_request_irq(i, IRQF_SHARED)) { | |
| if (min_count == -1 || info->count < min_count) { | |
| irq = i; | |
| min_count = info->count; | |
| } | |
| } | |
| } | |
| return irq; | |
| } | |
| /* | |
| * if the given vector is already owned by other, | |
| * assign a new vector for the other and make the vector available | |
| */ | |
| static void __init | |
| iosapic_reassign_vector (int irq) | |
| { | |
| int new_irq; | |
| if (iosapic_intr_info[irq].count) { | |
| new_irq = create_irq(); | |
| if (new_irq < 0) | |
| panic("%s: out of interrupt vectors!\n", __func__); | |
| printk(KERN_INFO "Reassigning vector %d to %d\n", | |
| irq_to_vector(irq), irq_to_vector(new_irq)); | |
| memcpy(&iosapic_intr_info[new_irq], &iosapic_intr_info[irq], | |
| sizeof(struct iosapic_intr_info)); | |
| INIT_LIST_HEAD(&iosapic_intr_info[new_irq].rtes); | |
| list_move(iosapic_intr_info[irq].rtes.next, | |
| &iosapic_intr_info[new_irq].rtes); | |
| memset(&iosapic_intr_info[irq], 0, | |
| sizeof(struct iosapic_intr_info)); | |
| iosapic_intr_info[irq].low32 = IOSAPIC_MASK; | |
| INIT_LIST_HEAD(&iosapic_intr_info[irq].rtes); | |
| } | |
| } | |
| static inline int irq_is_shared (int irq) | |
| { | |
| return (iosapic_intr_info[irq].count > 1); | |
| } | |
| struct irq_chip* | |
| ia64_native_iosapic_get_irq_chip(unsigned long trigger) | |
| { | |
| if (trigger == IOSAPIC_EDGE) | |
| return &irq_type_iosapic_edge; | |
| else | |
| return &irq_type_iosapic_level; | |
| } | |
| static int | |
| register_intr (unsigned int gsi, int irq, unsigned char delivery, | |
| unsigned long polarity, unsigned long trigger) | |
| { | |
| struct irq_chip *chip, *irq_type; | |
| int index; | |
| struct iosapic_rte_info *rte; | |
| index = find_iosapic(gsi); | |
| if (index < 0) { | |
| printk(KERN_WARNING "%s: No IOSAPIC for GSI %u\n", | |
| __func__, gsi); | |
| return -ENODEV; | |
| } | |
| rte = find_rte(irq, gsi); | |
| if (!rte) { | |
| rte = kzalloc(sizeof (*rte), GFP_ATOMIC); | |
| if (!rte) { | |
| printk(KERN_WARNING "%s: cannot allocate memory\n", | |
| __func__); | |
| return -ENOMEM; | |
| } | |
| rte->iosapic = &iosapic_lists[index]; | |
| rte->rte_index = gsi - rte->iosapic->gsi_base; | |
| rte->refcnt++; | |
| list_add_tail(&rte->rte_list, &iosapic_intr_info[irq].rtes); | |
| iosapic_intr_info[irq].count++; | |
| iosapic_lists[index].rtes_inuse++; | |
| } | |
| else if (rte->refcnt == NO_REF_RTE) { | |
| struct iosapic_intr_info *info = &iosapic_intr_info[irq]; | |
| if (info->count > 0 && | |
| (info->trigger != trigger || info->polarity != polarity)){ | |
| printk (KERN_WARNING | |
| "%s: cannot override the interrupt\n", | |
| __func__); | |
| return -EINVAL; | |
| } | |
| rte->refcnt++; | |
| iosapic_intr_info[irq].count++; | |
| iosapic_lists[index].rtes_inuse++; | |
| } | |
| iosapic_intr_info[irq].polarity = polarity; | |
| iosapic_intr_info[irq].dmode = delivery; | |
| iosapic_intr_info[irq].trigger = trigger; | |
| irq_type = iosapic_get_irq_chip(trigger); | |
| chip = irq_get_chip(irq); | |
| if (irq_type != NULL && chip != irq_type) { | |
| if (chip != &no_irq_chip) | |
| printk(KERN_WARNING | |
| "%s: changing vector %d from %s to %s\n", | |
| __func__, irq_to_vector(irq), | |
| chip->name, irq_type->name); | |
| chip = irq_type; | |
| } | |
| irq_set_chip_handler_name_locked(irq_get_irq_data(irq), chip, | |
| trigger == IOSAPIC_EDGE ? handle_edge_irq : handle_level_irq, | |
| NULL); | |
| return 0; | |
| } | |
| static unsigned int | |
| get_target_cpu (unsigned int gsi, int irq) | |
| { | |
| #ifdef CONFIG_SMP | |
| static int cpu = -1; | |
| extern int cpe_vector; | |
| cpumask_t domain = irq_to_domain(irq); | |
| /* | |
| * In case of vector shared by multiple RTEs, all RTEs that | |
| * share the vector need to use the same destination CPU. | |
| */ | |
| if (iosapic_intr_info[irq].count) | |
| return iosapic_intr_info[irq].dest; | |
| /* | |
| * If the platform supports redirection via XTP, let it | |
| * distribute interrupts. | |
| */ | |
| if (smp_int_redirect & SMP_IRQ_REDIRECTION) | |
| return cpu_physical_id(smp_processor_id()); | |
| /* | |
| * Some interrupts (ACPI SCI, for instance) are registered | |
| * before the BSP is marked as online. | |
| */ | |
| if (!cpu_online(smp_processor_id())) | |
| return cpu_physical_id(smp_processor_id()); | |
| #ifdef CONFIG_ACPI | |
| if (cpe_vector > 0 && irq_to_vector(irq) == IA64_CPEP_VECTOR) | |
| return get_cpei_target_cpu(); | |
| #endif | |
| #ifdef CONFIG_NUMA | |
| { | |
| int num_cpus, cpu_index, iosapic_index, numa_cpu, i = 0; | |
| const struct cpumask *cpu_mask; | |
| iosapic_index = find_iosapic(gsi); | |
| if (iosapic_index < 0 || | |
| iosapic_lists[iosapic_index].node == MAX_NUMNODES) | |
| goto skip_numa_setup; | |
| cpu_mask = cpumask_of_node(iosapic_lists[iosapic_index].node); | |
| num_cpus = 0; | |
| for_each_cpu_and(numa_cpu, cpu_mask, &domain) { | |
| if (cpu_online(numa_cpu)) | |
| num_cpus++; | |
| } | |
| if (!num_cpus) | |
| goto skip_numa_setup; | |
| /* Use irq assignment to distribute across cpus in node */ | |
| cpu_index = irq % num_cpus; | |
| for_each_cpu_and(numa_cpu, cpu_mask, &domain) | |
| if (cpu_online(numa_cpu) && i++ >= cpu_index) | |
| break; | |
| if (numa_cpu < nr_cpu_ids) | |
| return cpu_physical_id(numa_cpu); | |
| } | |
| skip_numa_setup: | |
| #endif | |
| /* | |
| * Otherwise, round-robin interrupt vectors across all the | |
| * processors. (It'd be nice if we could be smarter in the | |
| * case of NUMA.) | |
| */ | |
| do { | |
| if (++cpu >= nr_cpu_ids) | |
| cpu = 0; | |
| } while (!cpu_online(cpu) || !cpumask_test_cpu(cpu, &domain)); | |
| return cpu_physical_id(cpu); | |
| #else /* CONFIG_SMP */ | |
| return cpu_physical_id(smp_processor_id()); | |
| #endif | |
| } | |
| static inline unsigned char choose_dmode(void) | |
| { | |
| #ifdef CONFIG_SMP | |
| if (smp_int_redirect & SMP_IRQ_REDIRECTION) | |
| return IOSAPIC_LOWEST_PRIORITY; | |
| #endif | |
| return IOSAPIC_FIXED; | |
| } | |
| /* | |
| * ACPI can describe IOSAPIC interrupts via static tables and namespace | |
| * methods. This provides an interface to register those interrupts and | |
| * program the IOSAPIC RTE. | |
| */ | |
| int | |
| iosapic_register_intr (unsigned int gsi, | |
| unsigned long polarity, unsigned long trigger) | |
| { | |
| int irq, mask = 1, err; | |
| unsigned int dest; | |
| unsigned long flags; | |
| struct iosapic_rte_info *rte; | |
| u32 low32; | |
| unsigned char dmode; | |
| struct irq_desc *desc; | |
| /* | |
| * If this GSI has already been registered (i.e., it's a | |
| * shared interrupt, or we lost a race to register it), | |
| * don't touch the RTE. | |
| */ | |
| spin_lock_irqsave(&iosapic_lock, flags); | |
| irq = __gsi_to_irq(gsi); | |
| if (irq > 0) { | |
| rte = find_rte(irq, gsi); | |
| if(iosapic_intr_info[irq].count == 0) { | |
| assign_irq_vector(irq); | |
| irq_init_desc(irq); | |
| } else if (rte->refcnt != NO_REF_RTE) { | |
| rte->refcnt++; | |
| goto unlock_iosapic_lock; | |
| } | |
| } else | |
| irq = create_irq(); | |
| /* If vector is running out, we try to find a sharable vector */ | |
| if (irq < 0) { | |
| irq = iosapic_find_sharable_irq(trigger, polarity); | |
| if (irq < 0) | |
| goto unlock_iosapic_lock; | |
| } | |
| desc = irq_to_desc(irq); | |
| raw_spin_lock(&desc->lock); | |
| dest = get_target_cpu(gsi, irq); | |
| dmode = choose_dmode(); | |
| err = register_intr(gsi, irq, dmode, polarity, trigger); | |
| if (err < 0) { | |
| raw_spin_unlock(&desc->lock); | |
| irq = err; | |
| goto unlock_iosapic_lock; | |
| } | |
| /* | |
| * If the vector is shared and already unmasked for other | |
| * interrupt sources, don't mask it. | |
| */ | |
| low32 = iosapic_intr_info[irq].low32; | |
| if (irq_is_shared(irq) && !(low32 & IOSAPIC_MASK)) | |
| mask = 0; | |
| set_rte(gsi, irq, dest, mask); | |
| printk(KERN_INFO "GSI %u (%s, %s) -> CPU %d (0x%04x) vector %d\n", | |
| gsi, (trigger == IOSAPIC_EDGE ? "edge" : "level"), | |
| (polarity == IOSAPIC_POL_HIGH ? "high" : "low"), | |
| cpu_logical_id(dest), dest, irq_to_vector(irq)); | |
| raw_spin_unlock(&desc->lock); | |
| unlock_iosapic_lock: | |
| spin_unlock_irqrestore(&iosapic_lock, flags); | |
| return irq; | |
| } | |
| void | |
| iosapic_unregister_intr (unsigned int gsi) | |
| { | |
| unsigned long flags; | |
| int irq, index; | |
| u32 low32; | |
| unsigned long trigger, polarity; | |
| unsigned int dest; | |
| struct iosapic_rte_info *rte; | |
| /* | |
| * If the irq associated with the gsi is not found, | |
| * iosapic_unregister_intr() is unbalanced. We need to check | |
| * this again after getting locks. | |
| */ | |
| irq = gsi_to_irq(gsi); | |
| if (irq < 0) { | |
| printk(KERN_ERR "iosapic_unregister_intr(%u) unbalanced\n", | |
| gsi); | |
| WARN_ON(1); | |
| return; | |
| } | |
| spin_lock_irqsave(&iosapic_lock, flags); | |
| if ((rte = find_rte(irq, gsi)) == NULL) { | |
| printk(KERN_ERR "iosapic_unregister_intr(%u) unbalanced\n", | |
| gsi); | |
| WARN_ON(1); | |
| goto out; | |
| } | |
| if (--rte->refcnt > 0) | |
| goto out; | |
| rte->refcnt = NO_REF_RTE; | |
| /* Mask the interrupt */ | |
| low32 = iosapic_intr_info[irq].low32 | IOSAPIC_MASK; | |
| iosapic_write(rte->iosapic, IOSAPIC_RTE_LOW(rte->rte_index), low32); | |
| iosapic_intr_info[irq].count--; | |
| index = find_iosapic(gsi); | |
| iosapic_lists[index].rtes_inuse--; | |
| WARN_ON(iosapic_lists[index].rtes_inuse < 0); | |
| trigger = iosapic_intr_info[irq].trigger; | |
| polarity = iosapic_intr_info[irq].polarity; | |
| dest = iosapic_intr_info[irq].dest; | |
| printk(KERN_INFO | |
| "GSI %u (%s, %s) -> CPU %d (0x%04x) vector %d unregistered\n", | |
| gsi, (trigger == IOSAPIC_EDGE ? "edge" : "level"), | |
| (polarity == IOSAPIC_POL_HIGH ? "high" : "low"), | |
| cpu_logical_id(dest), dest, irq_to_vector(irq)); | |
| if (iosapic_intr_info[irq].count == 0) { | |
| #ifdef CONFIG_SMP | |
| /* Clear affinity */ | |
| cpumask_setall(irq_get_affinity_mask(irq)); | |
| #endif | |
| /* Clear the interrupt information */ | |
| iosapic_intr_info[irq].dest = 0; | |
| iosapic_intr_info[irq].dmode = 0; | |
| iosapic_intr_info[irq].polarity = 0; | |
| iosapic_intr_info[irq].trigger = 0; | |
| iosapic_intr_info[irq].low32 |= IOSAPIC_MASK; | |
| /* Destroy and reserve IRQ */ | |
| destroy_and_reserve_irq(irq); | |
| } | |
| out: | |
| spin_unlock_irqrestore(&iosapic_lock, flags); | |
| } | |
| /* | |
| * ACPI calls this when it finds an entry for a platform interrupt. | |
| */ | |
| int __init | |
| iosapic_register_platform_intr (u32 int_type, unsigned int gsi, | |
| int iosapic_vector, u16 eid, u16 id, | |
| unsigned long polarity, unsigned long trigger) | |
| { | |
| static const char * const name[] = {"unknown", "PMI", "INIT", "CPEI"}; | |
| unsigned char delivery; | |
| int irq, vector, mask = 0; | |
| unsigned int dest = ((id << 8) | eid) & 0xffff; | |
| switch (int_type) { | |
| case ACPI_INTERRUPT_PMI: | |
| irq = vector = iosapic_vector; | |
| bind_irq_vector(irq, vector, CPU_MASK_ALL); | |
| /* | |
| * since PMI vector is alloc'd by FW(ACPI) not by kernel, | |
| * we need to make sure the vector is available | |
| */ | |
| iosapic_reassign_vector(irq); | |
| delivery = IOSAPIC_PMI; | |
| break; | |
| case ACPI_INTERRUPT_INIT: | |
| irq = create_irq(); | |
| if (irq < 0) | |
| panic("%s: out of interrupt vectors!\n", __func__); | |
| vector = irq_to_vector(irq); | |
| delivery = IOSAPIC_INIT; | |
| break; | |
| case ACPI_INTERRUPT_CPEI: | |
| irq = vector = IA64_CPE_VECTOR; | |
| BUG_ON(bind_irq_vector(irq, vector, CPU_MASK_ALL)); | |
| delivery = IOSAPIC_FIXED; | |
| mask = 1; | |
| break; | |
| default: | |
| printk(KERN_ERR "%s: invalid int type 0x%x\n", __func__, | |
| int_type); | |
| return -1; | |
| } | |
| register_intr(gsi, irq, delivery, polarity, trigger); | |
| printk(KERN_INFO | |
| "PLATFORM int %s (0x%x): GSI %u (%s, %s) -> CPU %d (0x%04x)" | |
| " vector %d\n", | |
| int_type < ARRAY_SIZE(name) ? name[int_type] : "unknown", | |
| int_type, gsi, (trigger == IOSAPIC_EDGE ? "edge" : "level"), | |
| (polarity == IOSAPIC_POL_HIGH ? "high" : "low"), | |
| cpu_logical_id(dest), dest, vector); | |
| set_rte(gsi, irq, dest, mask); | |
| return vector; | |
| } | |
| /* | |
| * ACPI calls this when it finds an entry for a legacy ISA IRQ override. | |
| */ | |
| void iosapic_override_isa_irq(unsigned int isa_irq, unsigned int gsi, | |
| unsigned long polarity, unsigned long trigger) | |
| { | |
| int vector, irq; | |
| unsigned int dest = cpu_physical_id(smp_processor_id()); | |
| unsigned char dmode; | |
| irq = vector = isa_irq_to_vector(isa_irq); | |
| BUG_ON(bind_irq_vector(irq, vector, CPU_MASK_ALL)); | |
| dmode = choose_dmode(); | |
| register_intr(gsi, irq, dmode, polarity, trigger); | |
| DBG("ISA: IRQ %u -> GSI %u (%s,%s) -> CPU %d (0x%04x) vector %d\n", | |
| isa_irq, gsi, trigger == IOSAPIC_EDGE ? "edge" : "level", | |
| polarity == IOSAPIC_POL_HIGH ? "high" : "low", | |
| cpu_logical_id(dest), dest, vector); | |
| set_rte(gsi, irq, dest, 1); | |
| } | |
| void __init | |
| ia64_native_iosapic_pcat_compat_init(void) | |
| { | |
| if (pcat_compat) { | |
| /* | |
| * Disable the compatibility mode interrupts (8259 style), | |
| * needs IN/OUT support enabled. | |
| */ | |
| printk(KERN_INFO | |
| "%s: Disabling PC-AT compatible 8259 interrupts\n", | |
| __func__); | |
| outb(0xff, 0xA1); | |
| outb(0xff, 0x21); | |
| } | |
| } | |
| void __init | |
| iosapic_system_init (int system_pcat_compat) | |
| { | |
| int irq; | |
| for (irq = 0; irq < NR_IRQS; ++irq) { | |
| iosapic_intr_info[irq].low32 = IOSAPIC_MASK; | |
| /* mark as unused */ | |
| INIT_LIST_HEAD(&iosapic_intr_info[irq].rtes); | |
| iosapic_intr_info[irq].count = 0; | |
| } | |
| pcat_compat = system_pcat_compat; | |
| if (pcat_compat) | |
| iosapic_pcat_compat_init(); | |
| } | |
| static inline int | |
| iosapic_alloc (void) | |
| { | |
| int index; | |
| for (index = 0; index < NR_IOSAPICS; index++) | |
| if (!iosapic_lists[index].addr) | |
| return index; | |
| printk(KERN_WARNING "%s: failed to allocate iosapic\n", __func__); | |
| return -1; | |
| } | |
| static inline void | |
| iosapic_free (int index) | |
| { | |
| memset(&iosapic_lists[index], 0, sizeof(iosapic_lists[0])); | |
| } | |
| static inline int | |
| iosapic_check_gsi_range (unsigned int gsi_base, unsigned int ver) | |
| { | |
| int index; | |
| unsigned int gsi_end, base, end; | |
| /* check gsi range */ | |
| gsi_end = gsi_base + ((ver >> 16) & 0xff); | |
| for (index = 0; index < NR_IOSAPICS; index++) { | |
| if (!iosapic_lists[index].addr) | |
| continue; | |
| base = iosapic_lists[index].gsi_base; | |
| end = base + iosapic_lists[index].num_rte - 1; | |
| if (gsi_end < base || end < gsi_base) | |
| continue; /* OK */ | |
| return -EBUSY; | |
| } | |
| return 0; | |
| } | |
| static int | |
| iosapic_delete_rte(unsigned int irq, unsigned int gsi) | |
| { | |
| struct iosapic_rte_info *rte, *temp; | |
| list_for_each_entry_safe(rte, temp, &iosapic_intr_info[irq].rtes, | |
| rte_list) { | |
| if (rte->iosapic->gsi_base + rte->rte_index == gsi) { | |
| if (rte->refcnt) | |
| return -EBUSY; | |
| list_del(&rte->rte_list); | |
| kfree(rte); | |
| return 0; | |
| } | |
| } | |
| return -EINVAL; | |
| } | |
| int iosapic_init(unsigned long phys_addr, unsigned int gsi_base) | |
| { | |
| int num_rte, err, index; | |
| unsigned int isa_irq, ver; | |
| char __iomem *addr; | |
| unsigned long flags; | |
| spin_lock_irqsave(&iosapic_lock, flags); | |
| index = find_iosapic(gsi_base); | |
| if (index >= 0) { | |
| spin_unlock_irqrestore(&iosapic_lock, flags); | |
| return -EBUSY; | |
| } | |
| addr = ioremap(phys_addr, 0); | |
| if (addr == NULL) { | |
| spin_unlock_irqrestore(&iosapic_lock, flags); | |
| return -ENOMEM; | |
| } | |
| ver = iosapic_version(addr); | |
| if ((err = iosapic_check_gsi_range(gsi_base, ver))) { | |
| iounmap(addr); | |
| spin_unlock_irqrestore(&iosapic_lock, flags); | |
| return err; | |
| } | |
| /* | |
| * The MAX_REDIR register holds the highest input pin number | |
| * (starting from 0). We add 1 so that we can use it for | |
| * number of pins (= RTEs) | |
| */ | |
| num_rte = ((ver >> 16) & 0xff) + 1; | |
| index = iosapic_alloc(); | |
| iosapic_lists[index].addr = addr; | |
| iosapic_lists[index].gsi_base = gsi_base; | |
| iosapic_lists[index].num_rte = num_rte; | |
| #ifdef CONFIG_NUMA | |
| iosapic_lists[index].node = MAX_NUMNODES; | |
| #endif | |
| spin_lock_init(&iosapic_lists[index].lock); | |
| spin_unlock_irqrestore(&iosapic_lock, flags); | |
| if ((gsi_base == 0) && pcat_compat) { | |
| /* | |
| * Map the legacy ISA devices into the IOSAPIC data. Some of | |
| * these may get reprogrammed later on with data from the ACPI | |
| * Interrupt Source Override table. | |
| */ | |
| for (isa_irq = 0; isa_irq < 16; ++isa_irq) | |
| iosapic_override_isa_irq(isa_irq, isa_irq, | |
| IOSAPIC_POL_HIGH, | |
| IOSAPIC_EDGE); | |
| } | |
| return 0; | |
| } | |
| int iosapic_remove(unsigned int gsi_base) | |
| { | |
| int i, irq, index, err = 0; | |
| unsigned long flags; | |
| spin_lock_irqsave(&iosapic_lock, flags); | |
| index = find_iosapic(gsi_base); | |
| if (index < 0) { | |
| printk(KERN_WARNING "%s: No IOSAPIC for GSI base %u\n", | |
| __func__, gsi_base); | |
| goto out; | |
| } | |
| if (iosapic_lists[index].rtes_inuse) { | |
| err = -EBUSY; | |
| printk(KERN_WARNING "%s: IOSAPIC for GSI base %u is busy\n", | |
| __func__, gsi_base); | |
| goto out; | |
| } | |
| for (i = gsi_base; i < gsi_base + iosapic_lists[index].num_rte; i++) { | |
| irq = __gsi_to_irq(i); | |
| if (irq < 0) | |
| continue; | |
| err = iosapic_delete_rte(irq, i); | |
| if (err) | |
| goto out; | |
| } | |
| iounmap(iosapic_lists[index].addr); | |
| iosapic_free(index); | |
| out: | |
| spin_unlock_irqrestore(&iosapic_lock, flags); | |
| return err; | |
| } | |
| #ifdef CONFIG_NUMA | |
| void map_iosapic_to_node(unsigned int gsi_base, int node) | |
| { | |
| int index; | |
| index = find_iosapic(gsi_base); | |
| if (index < 0) { | |
| printk(KERN_WARNING "%s: No IOSAPIC for GSI %u\n", | |
| __func__, gsi_base); | |
| return; | |
| } | |
| iosapic_lists[index].node = node; | |
| return; | |
| } | |
| #endif |