|  | /* | 
|  | * Copyright © 2009 Keith Packard | 
|  | * | 
|  | * Permission to use, copy, modify, distribute, and sell this software and its | 
|  | * documentation for any purpose is hereby granted without fee, provided that | 
|  | * the above copyright notice appear in all copies and that both that copyright | 
|  | * notice and this permission notice appear in supporting documentation, and | 
|  | * that the name of the copyright holders not be used in advertising or | 
|  | * publicity pertaining to distribution of the software without specific, | 
|  | * written prior permission.  The copyright holders make no representations | 
|  | * about the suitability of this software for any purpose.  It is provided "as | 
|  | * is" without express or implied warranty. | 
|  | * | 
|  | * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, | 
|  | * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO | 
|  | * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR | 
|  | * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, | 
|  | * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER | 
|  | * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE | 
|  | * OF THIS SOFTWARE. | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/i2c.h> | 
|  | #include "drm_dp_helper.h" | 
|  | #include "drmP.h" | 
|  |  | 
|  | /* Run a single AUX_CH I2C transaction, writing/reading data as necessary */ | 
|  | static int | 
|  | i2c_algo_dp_aux_transaction(struct i2c_adapter *adapter, int mode, | 
|  | uint8_t write_byte, uint8_t *read_byte) | 
|  | { | 
|  | struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; | 
|  | int ret; | 
|  |  | 
|  | ret = (*algo_data->aux_ch)(adapter, mode, | 
|  | write_byte, read_byte); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * I2C over AUX CH | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * Send the address. If the I2C link is running, this 'restarts' | 
|  | * the connection with the new address, this is used for doing | 
|  | * a write followed by a read (as needed for DDC) | 
|  | */ | 
|  | static int | 
|  | i2c_algo_dp_aux_address(struct i2c_adapter *adapter, u16 address, bool reading) | 
|  | { | 
|  | struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; | 
|  | int mode = MODE_I2C_START; | 
|  | int ret; | 
|  |  | 
|  | if (reading) | 
|  | mode |= MODE_I2C_READ; | 
|  | else | 
|  | mode |= MODE_I2C_WRITE; | 
|  | algo_data->address = address; | 
|  | algo_data->running = true; | 
|  | ret = i2c_algo_dp_aux_transaction(adapter, mode, 0, NULL); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Stop the I2C transaction. This closes out the link, sending | 
|  | * a bare address packet with the MOT bit turned off | 
|  | */ | 
|  | static void | 
|  | i2c_algo_dp_aux_stop(struct i2c_adapter *adapter, bool reading) | 
|  | { | 
|  | struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; | 
|  | int mode = MODE_I2C_STOP; | 
|  |  | 
|  | if (reading) | 
|  | mode |= MODE_I2C_READ; | 
|  | else | 
|  | mode |= MODE_I2C_WRITE; | 
|  | if (algo_data->running) { | 
|  | (void) i2c_algo_dp_aux_transaction(adapter, mode, 0, NULL); | 
|  | algo_data->running = false; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Write a single byte to the current I2C address, the | 
|  | * the I2C link must be running or this returns -EIO | 
|  | */ | 
|  | static int | 
|  | i2c_algo_dp_aux_put_byte(struct i2c_adapter *adapter, u8 byte) | 
|  | { | 
|  | struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; | 
|  | int ret; | 
|  |  | 
|  | if (!algo_data->running) | 
|  | return -EIO; | 
|  |  | 
|  | ret = i2c_algo_dp_aux_transaction(adapter, MODE_I2C_WRITE, byte, NULL); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Read a single byte from the current I2C address, the | 
|  | * I2C link must be running or this returns -EIO | 
|  | */ | 
|  | static int | 
|  | i2c_algo_dp_aux_get_byte(struct i2c_adapter *adapter, u8 *byte_ret) | 
|  | { | 
|  | struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; | 
|  | int ret; | 
|  |  | 
|  | if (!algo_data->running) | 
|  | return -EIO; | 
|  |  | 
|  | ret = i2c_algo_dp_aux_transaction(adapter, MODE_I2C_READ, 0, byte_ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int | 
|  | i2c_algo_dp_aux_xfer(struct i2c_adapter *adapter, | 
|  | struct i2c_msg *msgs, | 
|  | int num) | 
|  | { | 
|  | int ret = 0; | 
|  | bool reading = false; | 
|  | int m; | 
|  | int b; | 
|  |  | 
|  | for (m = 0; m < num; m++) { | 
|  | u16 len = msgs[m].len; | 
|  | u8 *buf = msgs[m].buf; | 
|  | reading = (msgs[m].flags & I2C_M_RD) != 0; | 
|  | ret = i2c_algo_dp_aux_address(adapter, msgs[m].addr, reading); | 
|  | if (ret < 0) | 
|  | break; | 
|  | if (reading) { | 
|  | for (b = 0; b < len; b++) { | 
|  | ret = i2c_algo_dp_aux_get_byte(adapter, &buf[b]); | 
|  | if (ret < 0) | 
|  | break; | 
|  | } | 
|  | } else { | 
|  | for (b = 0; b < len; b++) { | 
|  | ret = i2c_algo_dp_aux_put_byte(adapter, buf[b]); | 
|  | if (ret < 0) | 
|  | break; | 
|  | } | 
|  | } | 
|  | if (ret < 0) | 
|  | break; | 
|  | } | 
|  | if (ret >= 0) | 
|  | ret = num; | 
|  | i2c_algo_dp_aux_stop(adapter, reading); | 
|  | DRM_DEBUG_KMS("dp_aux_xfer return %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static u32 | 
|  | i2c_algo_dp_aux_functionality(struct i2c_adapter *adapter) | 
|  | { | 
|  | return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | | 
|  | I2C_FUNC_SMBUS_READ_BLOCK_DATA | | 
|  | I2C_FUNC_SMBUS_BLOCK_PROC_CALL | | 
|  | I2C_FUNC_10BIT_ADDR; | 
|  | } | 
|  |  | 
|  | static const struct i2c_algorithm i2c_dp_aux_algo = { | 
|  | .master_xfer	= i2c_algo_dp_aux_xfer, | 
|  | .functionality	= i2c_algo_dp_aux_functionality, | 
|  | }; | 
|  |  | 
|  | static void | 
|  | i2c_dp_aux_reset_bus(struct i2c_adapter *adapter) | 
|  | { | 
|  | (void) i2c_algo_dp_aux_address(adapter, 0, false); | 
|  | (void) i2c_algo_dp_aux_stop(adapter, false); | 
|  |  | 
|  | } | 
|  |  | 
|  | static int | 
|  | i2c_dp_aux_prepare_bus(struct i2c_adapter *adapter) | 
|  | { | 
|  | adapter->algo = &i2c_dp_aux_algo; | 
|  | adapter->retries = 3; | 
|  | i2c_dp_aux_reset_bus(adapter); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int | 
|  | i2c_dp_aux_add_bus(struct i2c_adapter *adapter) | 
|  | { | 
|  | int error; | 
|  |  | 
|  | error = i2c_dp_aux_prepare_bus(adapter); | 
|  | if (error) | 
|  | return error; | 
|  | error = i2c_add_adapter(adapter); | 
|  | return error; | 
|  | } | 
|  | EXPORT_SYMBOL(i2c_dp_aux_add_bus); |