| /* |
| * Copyright 2005-2009 Analog Devices Inc. |
| * |
| * Licensed under the GPL-2 or later. |
| * |
| * Set up the interrupt priorities |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/irq.h> |
| #include <asm/blackfin.h> |
| |
| #include <asm/irq_handler.h> |
| #include <asm/bfin5xx_spi.h> |
| #include <asm/bfin_sport.h> |
| #include <asm/bfin_can.h> |
| #include <asm/bfin_dma.h> |
| #include <asm/dpmc.h> |
| |
| void __init program_IAR(void) |
| { |
| /* Program the IAR0 Register with the configured priority */ |
| bfin_write_SIC_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) | |
| ((CONFIG_IRQ_DMA_ERROR - 7) << IRQ_DMA_ERROR_POS) | |
| ((CONFIG_IRQ_ERROR - 7) << IRQ_ERROR_POS) | |
| ((CONFIG_IRQ_RTC - 7) << IRQ_RTC_POS) | |
| ((CONFIG_IRQ_PPI - 7) << IRQ_PPI_POS) | |
| ((CONFIG_IRQ_SPORT0_RX - 7) << IRQ_SPORT0_RX_POS) | |
| ((CONFIG_IRQ_SPORT0_TX - 7) << IRQ_SPORT0_TX_POS) | |
| ((CONFIG_IRQ_SPORT1_RX - 7) << IRQ_SPORT1_RX_POS)); |
| |
| bfin_write_SIC_IAR1(((CONFIG_IRQ_SPORT1_TX - 7) << IRQ_SPORT1_TX_POS) | |
| ((CONFIG_IRQ_TWI - 7) << IRQ_TWI_POS) | |
| ((CONFIG_IRQ_SPI - 7) << IRQ_SPI_POS) | |
| ((CONFIG_IRQ_UART0_RX - 7) << IRQ_UART0_RX_POS) | |
| ((CONFIG_IRQ_UART0_TX - 7) << IRQ_UART0_TX_POS) | |
| ((CONFIG_IRQ_UART1_RX - 7) << IRQ_UART1_RX_POS) | |
| ((CONFIG_IRQ_UART1_TX - 7) << IRQ_UART1_TX_POS) | |
| ((CONFIG_IRQ_CAN_RX - 7) << IRQ_CAN_RX_POS)); |
| |
| bfin_write_SIC_IAR2(((CONFIG_IRQ_CAN_TX - 7) << IRQ_CAN_TX_POS) | |
| ((CONFIG_IRQ_MAC_RX - 7) << IRQ_MAC_RX_POS) | |
| ((CONFIG_IRQ_MAC_TX - 7) << IRQ_MAC_TX_POS) | |
| ((CONFIG_IRQ_TIMER0 - 7) << IRQ_TIMER0_POS) | |
| ((CONFIG_IRQ_TIMER1 - 7) << IRQ_TIMER1_POS) | |
| ((CONFIG_IRQ_TIMER2 - 7) << IRQ_TIMER2_POS) | |
| ((CONFIG_IRQ_TIMER3 - 7) << IRQ_TIMER3_POS) | |
| ((CONFIG_IRQ_TIMER4 - 7) << IRQ_TIMER4_POS)); |
| |
| bfin_write_SIC_IAR3(((CONFIG_IRQ_TIMER5 - 7) << IRQ_TIMER5_POS) | |
| ((CONFIG_IRQ_TIMER6 - 7) << IRQ_TIMER6_POS) | |
| ((CONFIG_IRQ_TIMER7 - 7) << IRQ_TIMER7_POS) | |
| ((CONFIG_IRQ_PROG_INTA - 7) << IRQ_PROG_INTA_POS) | |
| ((CONFIG_IRQ_PORTG_INTB - 7) << IRQ_PORTG_INTB_POS) | |
| ((CONFIG_IRQ_MEM_DMA0 - 7) << IRQ_MEM_DMA0_POS) | |
| ((CONFIG_IRQ_MEM_DMA1 - 7) << IRQ_MEM_DMA1_POS) | |
| ((CONFIG_IRQ_WATCH - 7) << IRQ_WATCH_POS)); |
| |
| SSYNC(); |
| } |
| |
| #define SPI_ERR_MASK (BIT_STAT_TXCOL | BIT_STAT_RBSY | BIT_STAT_MODF | BIT_STAT_TXE) /* SPI_STAT */ |
| #define SPORT_ERR_MASK (ROVF | RUVF | TOVF | TUVF) /* SPORT_STAT */ |
| #define PPI_ERR_MASK (0xFFFF & ~FLD) /* PPI_STATUS */ |
| #define EMAC_ERR_MASK (PHYINT | MMCINT | RXFSINT | TXFSINT | WAKEDET | RXDMAERR | TXDMAERR | STMDONE) /* EMAC_SYSTAT */ |
| #define UART_ERR_MASK (0x6) /* UART_IIR */ |
| #define CAN_ERR_MASK (EWTIF | EWRIF | EPIF | BOIF | WUIF | UIAIF | AAIF | RMLIF | UCEIF | EXTIF | ADIF) /* CAN_GIF */ |
| |
| static int error_int_mask; |
| |
| static void bf537_generic_error_mask_irq(struct irq_data *d) |
| { |
| error_int_mask &= ~(1L << (d->irq - IRQ_PPI_ERROR)); |
| if (!error_int_mask) |
| bfin_internal_mask_irq(IRQ_GENERIC_ERROR); |
| } |
| |
| static void bf537_generic_error_unmask_irq(struct irq_data *d) |
| { |
| bfin_internal_unmask_irq(IRQ_GENERIC_ERROR); |
| error_int_mask |= 1L << (d->irq - IRQ_PPI_ERROR); |
| } |
| |
| static struct irq_chip bf537_generic_error_irqchip = { |
| .name = "ERROR", |
| .irq_ack = bfin_ack_noop, |
| .irq_mask_ack = bf537_generic_error_mask_irq, |
| .irq_mask = bf537_generic_error_mask_irq, |
| .irq_unmask = bf537_generic_error_unmask_irq, |
| }; |
| |
| static void bf537_demux_error_irq(struct irq_desc *inta_desc) |
| { |
| int irq = 0; |
| |
| #if (defined(CONFIG_BF537) || defined(CONFIG_BF536)) |
| if (bfin_read_EMAC_SYSTAT() & EMAC_ERR_MASK) |
| irq = IRQ_MAC_ERROR; |
| else |
| #endif |
| if (bfin_read_SPORT0_STAT() & SPORT_ERR_MASK) |
| irq = IRQ_SPORT0_ERROR; |
| else if (bfin_read_SPORT1_STAT() & SPORT_ERR_MASK) |
| irq = IRQ_SPORT1_ERROR; |
| else if (bfin_read_PPI_STATUS() & PPI_ERR_MASK) |
| irq = IRQ_PPI_ERROR; |
| else if (bfin_read_CAN_GIF() & CAN_ERR_MASK) |
| irq = IRQ_CAN_ERROR; |
| else if (bfin_read_SPI_STAT() & SPI_ERR_MASK) |
| irq = IRQ_SPI_ERROR; |
| else if ((bfin_read_UART0_IIR() & UART_ERR_MASK) == UART_ERR_MASK) |
| irq = IRQ_UART0_ERROR; |
| else if ((bfin_read_UART1_IIR() & UART_ERR_MASK) == UART_ERR_MASK) |
| irq = IRQ_UART1_ERROR; |
| |
| if (irq) { |
| if (error_int_mask & (1L << (irq - IRQ_PPI_ERROR))) |
| bfin_handle_irq(irq); |
| else { |
| |
| switch (irq) { |
| case IRQ_PPI_ERROR: |
| bfin_write_PPI_STATUS(PPI_ERR_MASK); |
| break; |
| #if (defined(CONFIG_BF537) || defined(CONFIG_BF536)) |
| case IRQ_MAC_ERROR: |
| bfin_write_EMAC_SYSTAT(EMAC_ERR_MASK); |
| break; |
| #endif |
| case IRQ_SPORT0_ERROR: |
| bfin_write_SPORT0_STAT(SPORT_ERR_MASK); |
| break; |
| |
| case IRQ_SPORT1_ERROR: |
| bfin_write_SPORT1_STAT(SPORT_ERR_MASK); |
| break; |
| |
| case IRQ_CAN_ERROR: |
| bfin_write_CAN_GIS(CAN_ERR_MASK); |
| break; |
| |
| case IRQ_SPI_ERROR: |
| bfin_write_SPI_STAT(SPI_ERR_MASK); |
| break; |
| |
| default: |
| break; |
| } |
| |
| pr_debug("IRQ %d:" |
| " MASKED PERIPHERAL ERROR INTERRUPT ASSERTED\n", |
| irq); |
| } |
| } else |
| pr_err("%s: IRQ ?: PERIPHERAL ERROR INTERRUPT ASSERTED BUT NO SOURCE FOUND\n", |
| __func__); |
| |
| } |
| |
| #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) |
| static int mac_rx_int_mask; |
| |
| static void bf537_mac_rx_mask_irq(struct irq_data *d) |
| { |
| mac_rx_int_mask &= ~(1L << (d->irq - IRQ_MAC_RX)); |
| if (!mac_rx_int_mask) |
| bfin_internal_mask_irq(IRQ_PH_INTA_MAC_RX); |
| } |
| |
| static void bf537_mac_rx_unmask_irq(struct irq_data *d) |
| { |
| bfin_internal_unmask_irq(IRQ_PH_INTA_MAC_RX); |
| mac_rx_int_mask |= 1L << (d->irq - IRQ_MAC_RX); |
| } |
| |
| static struct irq_chip bf537_mac_rx_irqchip = { |
| .name = "ERROR", |
| .irq_ack = bfin_ack_noop, |
| .irq_mask_ack = bf537_mac_rx_mask_irq, |
| .irq_mask = bf537_mac_rx_mask_irq, |
| .irq_unmask = bf537_mac_rx_unmask_irq, |
| }; |
| |
| static void bf537_demux_mac_rx_irq(struct irq_desc *desc) |
| { |
| if (bfin_read_DMA1_IRQ_STATUS() & (DMA_DONE | DMA_ERR)) |
| bfin_handle_irq(IRQ_MAC_RX); |
| else |
| bfin_demux_gpio_irq(desc); |
| } |
| #endif |
| |
| void __init init_mach_irq(void) |
| { |
| int irq; |
| |
| #if defined(CONFIG_BF537) || defined(CONFIG_BF536) |
| /* Clear EMAC Interrupt Status bits so we can demux it later */ |
| bfin_write_EMAC_SYSTAT(-1); |
| #endif |
| |
| irq_set_chained_handler(IRQ_GENERIC_ERROR, bf537_demux_error_irq); |
| for (irq = IRQ_PPI_ERROR; irq <= IRQ_UART1_ERROR; irq++) |
| irq_set_chip_and_handler(irq, &bf537_generic_error_irqchip, |
| handle_level_irq); |
| |
| #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) |
| irq_set_chained_handler(IRQ_PH_INTA_MAC_RX, bf537_demux_mac_rx_irq); |
| irq_set_chip_and_handler(IRQ_MAC_RX, &bf537_mac_rx_irqchip, handle_level_irq); |
| irq_set_chip_and_handler(IRQ_PORTH_INTA, &bf537_mac_rx_irqchip, handle_level_irq); |
| |
| irq_set_chained_handler(IRQ_MAC_ERROR, bfin_demux_mac_status_irq); |
| #endif |
| } |