| /* |
| * Nomadik clock implementation |
| * Copyright (C) 2013 ST-Ericsson AB |
| * License terms: GNU General Public License (GPL) version 2 |
| * Author: Linus Walleij <linus.walleij@linaro.org> |
| */ |
| |
| #define pr_fmt(fmt) "Nomadik SRC clocks: " fmt |
| |
| #include <linux/bitops.h> |
| #include <linux/slab.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/clk-provider.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/debugfs.h> |
| #include <linux/seq_file.h> |
| #include <linux/spinlock.h> |
| #include <linux/reboot.h> |
| |
| /* |
| * The Nomadik clock tree is described in the STN8815A12 DB V4.2 |
| * reference manual for the chip, page 94 ff. |
| * Clock IDs are in the STn8815 Reference Manual table 3, page 27. |
| */ |
| |
| #define SRC_CR 0x00U |
| #define SRC_CR_T0_ENSEL BIT(15) |
| #define SRC_CR_T1_ENSEL BIT(17) |
| #define SRC_CR_T2_ENSEL BIT(19) |
| #define SRC_CR_T3_ENSEL BIT(21) |
| #define SRC_CR_T4_ENSEL BIT(23) |
| #define SRC_CR_T5_ENSEL BIT(25) |
| #define SRC_CR_T6_ENSEL BIT(27) |
| #define SRC_CR_T7_ENSEL BIT(29) |
| #define SRC_XTALCR 0x0CU |
| #define SRC_XTALCR_XTALTIMEN BIT(20) |
| #define SRC_XTALCR_SXTALDIS BIT(19) |
| #define SRC_XTALCR_MXTALSTAT BIT(2) |
| #define SRC_XTALCR_MXTALEN BIT(1) |
| #define SRC_XTALCR_MXTALOVER BIT(0) |
| #define SRC_PLLCR 0x10U |
| #define SRC_PLLCR_PLLTIMEN BIT(29) |
| #define SRC_PLLCR_PLL2EN BIT(28) |
| #define SRC_PLLCR_PLL1STAT BIT(2) |
| #define SRC_PLLCR_PLL1EN BIT(1) |
| #define SRC_PLLCR_PLL1OVER BIT(0) |
| #define SRC_PLLFR 0x14U |
| #define SRC_PCKEN0 0x24U |
| #define SRC_PCKDIS0 0x28U |
| #define SRC_PCKENSR0 0x2CU |
| #define SRC_PCKSR0 0x30U |
| #define SRC_PCKEN1 0x34U |
| #define SRC_PCKDIS1 0x38U |
| #define SRC_PCKENSR1 0x3CU |
| #define SRC_PCKSR1 0x40U |
| |
| /* Lock protecting the SRC_CR register */ |
| static DEFINE_SPINLOCK(src_lock); |
| /* Base address of the SRC */ |
| static void __iomem *src_base; |
| |
| static int nomadik_clk_reboot_handler(struct notifier_block *this, |
| unsigned long code, |
| void *unused) |
| { |
| u32 val; |
| |
| /* The main chrystal need to be enabled for reboot to work */ |
| val = readl(src_base + SRC_XTALCR); |
| val &= ~SRC_XTALCR_MXTALOVER; |
| val |= SRC_XTALCR_MXTALEN; |
| pr_crit("force-enabling MXTALO\n"); |
| writel(val, src_base + SRC_XTALCR); |
| return NOTIFY_OK; |
| } |
| |
| static struct notifier_block nomadik_clk_reboot_notifier = { |
| .notifier_call = nomadik_clk_reboot_handler, |
| }; |
| |
| static const struct of_device_id nomadik_src_match[] __initconst = { |
| { .compatible = "stericsson,nomadik-src" }, |
| { /* sentinel */ } |
| }; |
| |
| static void __init nomadik_src_init(void) |
| { |
| struct device_node *np; |
| u32 val; |
| |
| np = of_find_matching_node(NULL, nomadik_src_match); |
| if (!np) { |
| pr_crit("no matching node for SRC, aborting clock init\n"); |
| return; |
| } |
| src_base = of_iomap(np, 0); |
| if (!src_base) { |
| pr_err("%s: must have src parent node with REGS (%s)\n", |
| __func__, np->name); |
| return; |
| } |
| |
| /* Set all timers to use the 2.4 MHz TIMCLK */ |
| val = readl(src_base + SRC_CR); |
| val |= SRC_CR_T0_ENSEL; |
| val |= SRC_CR_T1_ENSEL; |
| val |= SRC_CR_T2_ENSEL; |
| val |= SRC_CR_T3_ENSEL; |
| val |= SRC_CR_T4_ENSEL; |
| val |= SRC_CR_T5_ENSEL; |
| val |= SRC_CR_T6_ENSEL; |
| val |= SRC_CR_T7_ENSEL; |
| writel(val, src_base + SRC_CR); |
| |
| val = readl(src_base + SRC_XTALCR); |
| pr_info("SXTALO is %s\n", |
| (val & SRC_XTALCR_SXTALDIS) ? "disabled" : "enabled"); |
| pr_info("MXTAL is %s\n", |
| (val & SRC_XTALCR_MXTALSTAT) ? "enabled" : "disabled"); |
| if (of_property_read_bool(np, "disable-sxtalo")) { |
| /* The machine uses an external oscillator circuit */ |
| val |= SRC_XTALCR_SXTALDIS; |
| pr_info("disabling SXTALO\n"); |
| } |
| if (of_property_read_bool(np, "disable-mxtalo")) { |
| /* Disable this too: also run by external oscillator */ |
| val |= SRC_XTALCR_MXTALOVER; |
| val &= ~SRC_XTALCR_MXTALEN; |
| pr_info("disabling MXTALO\n"); |
| } |
| writel(val, src_base + SRC_XTALCR); |
| register_reboot_notifier(&nomadik_clk_reboot_notifier); |
| } |
| |
| /** |
| * struct clk_pll1 - Nomadik PLL1 clock |
| * @hw: corresponding clock hardware entry |
| * @id: PLL instance: 1 or 2 |
| */ |
| struct clk_pll { |
| struct clk_hw hw; |
| int id; |
| }; |
| |
| /** |
| * struct clk_src - Nomadik src clock |
| * @hw: corresponding clock hardware entry |
| * @id: the clock ID |
| * @group1: true if the clock is in group1, else it is in group0 |
| * @clkbit: bit 0...31 corresponding to the clock in each clock register |
| */ |
| struct clk_src { |
| struct clk_hw hw; |
| int id; |
| bool group1; |
| u32 clkbit; |
| }; |
| |
| #define to_pll(_hw) container_of(_hw, struct clk_pll, hw) |
| #define to_src(_hw) container_of(_hw, struct clk_src, hw) |
| |
| static int pll_clk_enable(struct clk_hw *hw) |
| { |
| struct clk_pll *pll = to_pll(hw); |
| u32 val; |
| |
| spin_lock(&src_lock); |
| val = readl(src_base + SRC_PLLCR); |
| if (pll->id == 1) { |
| if (val & SRC_PLLCR_PLL1OVER) { |
| val |= SRC_PLLCR_PLL1EN; |
| writel(val, src_base + SRC_PLLCR); |
| } |
| } else if (pll->id == 2) { |
| val |= SRC_PLLCR_PLL2EN; |
| writel(val, src_base + SRC_PLLCR); |
| } |
| spin_unlock(&src_lock); |
| return 0; |
| } |
| |
| static void pll_clk_disable(struct clk_hw *hw) |
| { |
| struct clk_pll *pll = to_pll(hw); |
| u32 val; |
| |
| spin_lock(&src_lock); |
| val = readl(src_base + SRC_PLLCR); |
| if (pll->id == 1) { |
| if (val & SRC_PLLCR_PLL1OVER) { |
| val &= ~SRC_PLLCR_PLL1EN; |
| writel(val, src_base + SRC_PLLCR); |
| } |
| } else if (pll->id == 2) { |
| val &= ~SRC_PLLCR_PLL2EN; |
| writel(val, src_base + SRC_PLLCR); |
| } |
| spin_unlock(&src_lock); |
| } |
| |
| static int pll_clk_is_enabled(struct clk_hw *hw) |
| { |
| struct clk_pll *pll = to_pll(hw); |
| u32 val; |
| |
| val = readl(src_base + SRC_PLLCR); |
| if (pll->id == 1) { |
| if (val & SRC_PLLCR_PLL1OVER) |
| return !!(val & SRC_PLLCR_PLL1EN); |
| } else if (pll->id == 2) { |
| return !!(val & SRC_PLLCR_PLL2EN); |
| } |
| return 1; |
| } |
| |
| static unsigned long pll_clk_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct clk_pll *pll = to_pll(hw); |
| u32 val; |
| |
| val = readl(src_base + SRC_PLLFR); |
| |
| if (pll->id == 1) { |
| u8 mul; |
| u8 div; |
| |
| mul = (val >> 8) & 0x3FU; |
| mul += 2; |
| div = val & 0x07U; |
| return (parent_rate * mul) >> div; |
| } |
| |
| if (pll->id == 2) { |
| u8 mul; |
| |
| mul = (val >> 24) & 0x3FU; |
| mul += 2; |
| return (parent_rate * mul); |
| } |
| |
| /* Unknown PLL */ |
| return 0; |
| } |
| |
| |
| static const struct clk_ops pll_clk_ops = { |
| .enable = pll_clk_enable, |
| .disable = pll_clk_disable, |
| .is_enabled = pll_clk_is_enabled, |
| .recalc_rate = pll_clk_recalc_rate, |
| }; |
| |
| static struct clk_hw * __init |
| pll_clk_register(struct device *dev, const char *name, |
| const char *parent_name, u32 id) |
| { |
| int ret; |
| struct clk_pll *pll; |
| struct clk_init_data init; |
| |
| if (id != 1 && id != 2) { |
| pr_err("%s: the Nomadik has only PLL 1 & 2\n", __func__); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| pll = kzalloc(sizeof(*pll), GFP_KERNEL); |
| if (!pll) |
| return ERR_PTR(-ENOMEM); |
| |
| init.name = name; |
| init.ops = &pll_clk_ops; |
| init.parent_names = (parent_name ? &parent_name : NULL); |
| init.num_parents = (parent_name ? 1 : 0); |
| pll->hw.init = &init; |
| pll->id = id; |
| |
| pr_debug("register PLL1 clock \"%s\"\n", name); |
| |
| ret = clk_hw_register(dev, &pll->hw); |
| if (ret) { |
| kfree(pll); |
| return ERR_PTR(ret); |
| } |
| |
| return &pll->hw; |
| } |
| |
| /* |
| * The Nomadik SRC clocks are gated, but not in the sense that |
| * you read-modify-write a register. Instead there are separate |
| * clock enable and clock disable registers. Writing a '1' bit in |
| * the enable register for a certain clock ungates that clock without |
| * affecting the other clocks. The disable register works the opposite |
| * way. |
| */ |
| |
| static int src_clk_enable(struct clk_hw *hw) |
| { |
| struct clk_src *sclk = to_src(hw); |
| u32 enreg = sclk->group1 ? SRC_PCKEN1 : SRC_PCKEN0; |
| u32 sreg = sclk->group1 ? SRC_PCKSR1 : SRC_PCKSR0; |
| |
| writel(sclk->clkbit, src_base + enreg); |
| /* spin until enabled */ |
| while (!(readl(src_base + sreg) & sclk->clkbit)) |
| cpu_relax(); |
| return 0; |
| } |
| |
| static void src_clk_disable(struct clk_hw *hw) |
| { |
| struct clk_src *sclk = to_src(hw); |
| u32 disreg = sclk->group1 ? SRC_PCKDIS1 : SRC_PCKDIS0; |
| u32 sreg = sclk->group1 ? SRC_PCKSR1 : SRC_PCKSR0; |
| |
| writel(sclk->clkbit, src_base + disreg); |
| /* spin until disabled */ |
| while (readl(src_base + sreg) & sclk->clkbit) |
| cpu_relax(); |
| } |
| |
| static int src_clk_is_enabled(struct clk_hw *hw) |
| { |
| struct clk_src *sclk = to_src(hw); |
| u32 sreg = sclk->group1 ? SRC_PCKSR1 : SRC_PCKSR0; |
| u32 val = readl(src_base + sreg); |
| |
| return !!(val & sclk->clkbit); |
| } |
| |
| static unsigned long |
| src_clk_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| return parent_rate; |
| } |
| |
| static const struct clk_ops src_clk_ops = { |
| .enable = src_clk_enable, |
| .disable = src_clk_disable, |
| .is_enabled = src_clk_is_enabled, |
| .recalc_rate = src_clk_recalc_rate, |
| }; |
| |
| static struct clk_hw * __init |
| src_clk_register(struct device *dev, const char *name, |
| const char *parent_name, u8 id) |
| { |
| int ret; |
| struct clk_src *sclk; |
| struct clk_init_data init; |
| |
| sclk = kzalloc(sizeof(*sclk), GFP_KERNEL); |
| if (!sclk) |
| return ERR_PTR(-ENOMEM); |
| |
| init.name = name; |
| init.ops = &src_clk_ops; |
| /* Do not force-disable the static SDRAM controller */ |
| if (id == 2) |
| init.flags = CLK_IGNORE_UNUSED; |
| else |
| init.flags = 0; |
| init.parent_names = (parent_name ? &parent_name : NULL); |
| init.num_parents = (parent_name ? 1 : 0); |
| sclk->hw.init = &init; |
| sclk->id = id; |
| sclk->group1 = (id > 31); |
| sclk->clkbit = BIT(id & 0x1f); |
| |
| pr_debug("register clock \"%s\" ID: %d group: %d bits: %08x\n", |
| name, id, sclk->group1, sclk->clkbit); |
| |
| ret = clk_hw_register(dev, &sclk->hw); |
| if (ret) { |
| kfree(sclk); |
| return ERR_PTR(ret); |
| } |
| |
| return &sclk->hw; |
| } |
| |
| #ifdef CONFIG_DEBUG_FS |
| |
| static u32 src_pcksr0_boot; |
| static u32 src_pcksr1_boot; |
| |
| static const char * const src_clk_names[] = { |
| "HCLKDMA0 ", |
| "HCLKSMC ", |
| "HCLKSDRAM ", |
| "HCLKDMA1 ", |
| "HCLKCLCD ", |
| "PCLKIRDA ", |
| "PCLKSSP ", |
| "PCLKUART0 ", |
| "PCLKSDI ", |
| "PCLKI2C0 ", |
| "PCLKI2C1 ", |
| "PCLKUART1 ", |
| "PCLMSP0 ", |
| "HCLKUSB ", |
| "HCLKDIF ", |
| "HCLKSAA ", |
| "HCLKSVA ", |
| "PCLKHSI ", |
| "PCLKXTI ", |
| "PCLKUART2 ", |
| "PCLKMSP1 ", |
| "PCLKMSP2 ", |
| "PCLKOWM ", |
| "HCLKHPI ", |
| "PCLKSKE ", |
| "PCLKHSEM ", |
| "HCLK3D ", |
| "HCLKHASH ", |
| "HCLKCRYP ", |
| "PCLKMSHC ", |
| "HCLKUSBM ", |
| "HCLKRNG ", |
| "RESERVED ", |
| "RESERVED ", |
| "RESERVED ", |
| "RESERVED ", |
| "CLDCLK ", |
| "IRDACLK ", |
| "SSPICLK ", |
| "UART0CLK ", |
| "SDICLK ", |
| "I2C0CLK ", |
| "I2C1CLK ", |
| "UART1CLK ", |
| "MSPCLK0 ", |
| "USBCLK ", |
| "DIFCLK ", |
| "IPI2CCLK ", |
| "IPBMCCLK ", |
| "HSICLKRX ", |
| "HSICLKTX ", |
| "UART2CLK ", |
| "MSPCLK1 ", |
| "MSPCLK2 ", |
| "OWMCLK ", |
| "RESERVED ", |
| "SKECLK ", |
| "RESERVED ", |
| "3DCLK ", |
| "PCLKMSP3 ", |
| "MSPCLK3 ", |
| "MSHCCLK ", |
| "USBMCLK ", |
| "RNGCCLK ", |
| }; |
| |
| static int nomadik_src_clk_show(struct seq_file *s, void *what) |
| { |
| int i; |
| u32 src_pcksr0 = readl(src_base + SRC_PCKSR0); |
| u32 src_pcksr1 = readl(src_base + SRC_PCKSR1); |
| u32 src_pckensr0 = readl(src_base + SRC_PCKENSR0); |
| u32 src_pckensr1 = readl(src_base + SRC_PCKENSR1); |
| |
| seq_puts(s, "Clock: Boot: Now: Request: ASKED:\n"); |
| for (i = 0; i < ARRAY_SIZE(src_clk_names); i++) { |
| u32 pcksrb = (i < 0x20) ? src_pcksr0_boot : src_pcksr1_boot; |
| u32 pcksr = (i < 0x20) ? src_pcksr0 : src_pcksr1; |
| u32 pckreq = (i < 0x20) ? src_pckensr0 : src_pckensr1; |
| u32 mask = BIT(i & 0x1f); |
| |
| seq_printf(s, "%s %s %s %s\n", |
| src_clk_names[i], |
| (pcksrb & mask) ? "on " : "off", |
| (pcksr & mask) ? "on " : "off", |
| (pckreq & mask) ? "on " : "off"); |
| } |
| return 0; |
| } |
| |
| static int nomadik_src_clk_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, nomadik_src_clk_show, NULL); |
| } |
| |
| static const struct file_operations nomadik_src_clk_debugfs_ops = { |
| .open = nomadik_src_clk_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| }; |
| |
| static int __init nomadik_src_clk_init_debugfs(void) |
| { |
| /* Vital for multiplatform */ |
| if (!src_base) |
| return -ENODEV; |
| src_pcksr0_boot = readl(src_base + SRC_PCKSR0); |
| src_pcksr1_boot = readl(src_base + SRC_PCKSR1); |
| debugfs_create_file("nomadik-src-clk", S_IFREG | S_IRUGO, |
| NULL, NULL, &nomadik_src_clk_debugfs_ops); |
| return 0; |
| } |
| device_initcall(nomadik_src_clk_init_debugfs); |
| |
| #endif |
| |
| static void __init of_nomadik_pll_setup(struct device_node *np) |
| { |
| struct clk_hw *hw; |
| const char *clk_name = np->name; |
| const char *parent_name; |
| u32 pll_id; |
| |
| if (!src_base) |
| nomadik_src_init(); |
| |
| if (of_property_read_u32(np, "pll-id", &pll_id)) { |
| pr_err("%s: PLL \"%s\" missing pll-id property\n", |
| __func__, clk_name); |
| return; |
| } |
| parent_name = of_clk_get_parent_name(np, 0); |
| hw = pll_clk_register(NULL, clk_name, parent_name, pll_id); |
| if (!IS_ERR(hw)) |
| of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw); |
| } |
| CLK_OF_DECLARE(nomadik_pll_clk, |
| "st,nomadik-pll-clock", of_nomadik_pll_setup); |
| |
| static void __init of_nomadik_hclk_setup(struct device_node *np) |
| { |
| struct clk_hw *hw; |
| const char *clk_name = np->name; |
| const char *parent_name; |
| |
| if (!src_base) |
| nomadik_src_init(); |
| |
| parent_name = of_clk_get_parent_name(np, 0); |
| /* |
| * The HCLK divides PLL1 with 1 (passthru), 2, 3 or 4. |
| */ |
| hw = clk_hw_register_divider(NULL, clk_name, parent_name, |
| 0, src_base + SRC_CR, |
| 13, 2, |
| CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO, |
| &src_lock); |
| if (!IS_ERR(hw)) |
| of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw); |
| } |
| CLK_OF_DECLARE(nomadik_hclk_clk, |
| "st,nomadik-hclk-clock", of_nomadik_hclk_setup); |
| |
| static void __init of_nomadik_src_clk_setup(struct device_node *np) |
| { |
| struct clk_hw *hw; |
| const char *clk_name = np->name; |
| const char *parent_name; |
| u32 clk_id; |
| |
| if (!src_base) |
| nomadik_src_init(); |
| |
| if (of_property_read_u32(np, "clock-id", &clk_id)) { |
| pr_err("%s: SRC clock \"%s\" missing clock-id property\n", |
| __func__, clk_name); |
| return; |
| } |
| parent_name = of_clk_get_parent_name(np, 0); |
| hw = src_clk_register(NULL, clk_name, parent_name, clk_id); |
| if (!IS_ERR(hw)) |
| of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw); |
| } |
| CLK_OF_DECLARE(nomadik_src_clk, |
| "st,nomadik-src-clock", of_nomadik_src_clk_setup); |