| /* |
| * Driver for the OV5645 camera sensor. |
| * |
| * Copyright (c) 2011-2015, The Linux Foundation. All rights reserved. |
| * Copyright (C) 2015 By Tech Design S.L. All Rights Reserved. |
| * Copyright (C) 2012-2013 Freescale Semiconductor, Inc. All Rights Reserved. |
| * |
| * Based on: |
| * - the OV5645 driver from QC msm-3.10 kernel on codeaurora.org: |
| * https://us.codeaurora.org/cgit/quic/la/kernel/msm-3.10/tree/drivers/ |
| * media/platform/msm/camera_v2/sensor/ov5645.c?h=LA.BR.1.2.4_rb1.41 |
| * - the OV5640 driver posted on linux-media: |
| * https://www.mail-archive.com/linux-media%40vger.kernel.org/msg92671.html |
| */ |
| |
| /* |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/bitops.h> |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/device.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/i2c.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_graph.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/slab.h> |
| #include <linux/types.h> |
| #include <media/v4l2-ctrls.h> |
| #include <media/v4l2-fwnode.h> |
| #include <media/v4l2-subdev.h> |
| |
| #define OV5645_VOLTAGE_ANALOG 2800000 |
| #define OV5645_VOLTAGE_DIGITAL_CORE 1500000 |
| #define OV5645_VOLTAGE_DIGITAL_IO 1800000 |
| |
| #define OV5645_SYSTEM_CTRL0 0x3008 |
| #define OV5645_SYSTEM_CTRL0_START 0x02 |
| #define OV5645_SYSTEM_CTRL0_STOP 0x42 |
| #define OV5645_CHIP_ID_HIGH 0x300a |
| #define OV5645_CHIP_ID_HIGH_BYTE 0x56 |
| #define OV5645_CHIP_ID_LOW 0x300b |
| #define OV5645_CHIP_ID_LOW_BYTE 0x45 |
| #define OV5645_AWB_MANUAL_CONTROL 0x3406 |
| #define OV5645_AWB_MANUAL_ENABLE BIT(0) |
| #define OV5645_AEC_PK_MANUAL 0x3503 |
| #define OV5645_AEC_MANUAL_ENABLE BIT(0) |
| #define OV5645_AGC_MANUAL_ENABLE BIT(1) |
| #define OV5645_TIMING_TC_REG20 0x3820 |
| #define OV5645_SENSOR_VFLIP BIT(1) |
| #define OV5645_ISP_VFLIP BIT(2) |
| #define OV5645_TIMING_TC_REG21 0x3821 |
| #define OV5645_SENSOR_MIRROR BIT(1) |
| #define OV5645_PRE_ISP_TEST_SETTING_1 0x503d |
| #define OV5645_TEST_PATTERN_MASK 0x3 |
| #define OV5645_SET_TEST_PATTERN(x) ((x) & OV5645_TEST_PATTERN_MASK) |
| #define OV5645_TEST_PATTERN_ENABLE BIT(7) |
| #define OV5645_SDE_SAT_U 0x5583 |
| #define OV5645_SDE_SAT_V 0x5584 |
| |
| struct reg_value { |
| u16 reg; |
| u8 val; |
| }; |
| |
| struct ov5645_mode_info { |
| u32 width; |
| u32 height; |
| const struct reg_value *data; |
| u32 data_size; |
| u32 pixel_clock; |
| u32 link_freq; |
| }; |
| |
| struct ov5645 { |
| struct i2c_client *i2c_client; |
| struct device *dev; |
| struct v4l2_subdev sd; |
| struct media_pad pad; |
| struct v4l2_fwnode_endpoint ep; |
| struct v4l2_mbus_framefmt fmt; |
| struct v4l2_rect crop; |
| struct clk *xclk; |
| |
| struct regulator *io_regulator; |
| struct regulator *core_regulator; |
| struct regulator *analog_regulator; |
| |
| const struct ov5645_mode_info *current_mode; |
| |
| struct v4l2_ctrl_handler ctrls; |
| struct v4l2_ctrl *pixel_clock; |
| struct v4l2_ctrl *link_freq; |
| |
| /* Cached register values */ |
| u8 aec_pk_manual; |
| u8 timing_tc_reg20; |
| u8 timing_tc_reg21; |
| |
| struct mutex power_lock; /* lock to protect power state */ |
| int power_count; |
| |
| struct gpio_desc *enable_gpio; |
| struct gpio_desc *rst_gpio; |
| }; |
| |
| static inline struct ov5645 *to_ov5645(struct v4l2_subdev *sd) |
| { |
| return container_of(sd, struct ov5645, sd); |
| } |
| |
| static const struct reg_value ov5645_global_init_setting[] = { |
| { 0x3103, 0x11 }, |
| { 0x3008, 0x82 }, |
| { 0x3008, 0x42 }, |
| { 0x3103, 0x03 }, |
| { 0x3503, 0x07 }, |
| { 0x3002, 0x1c }, |
| { 0x3006, 0xc3 }, |
| { 0x300e, 0x45 }, |
| { 0x3017, 0x00 }, |
| { 0x3018, 0x00 }, |
| { 0x302e, 0x0b }, |
| { 0x3037, 0x13 }, |
| { 0x3108, 0x01 }, |
| { 0x3611, 0x06 }, |
| { 0x3500, 0x00 }, |
| { 0x3501, 0x01 }, |
| { 0x3502, 0x00 }, |
| { 0x350a, 0x00 }, |
| { 0x350b, 0x3f }, |
| { 0x3620, 0x33 }, |
| { 0x3621, 0xe0 }, |
| { 0x3622, 0x01 }, |
| { 0x3630, 0x2e }, |
| { 0x3631, 0x00 }, |
| { 0x3632, 0x32 }, |
| { 0x3633, 0x52 }, |
| { 0x3634, 0x70 }, |
| { 0x3635, 0x13 }, |
| { 0x3636, 0x03 }, |
| { 0x3703, 0x5a }, |
| { 0x3704, 0xa0 }, |
| { 0x3705, 0x1a }, |
| { 0x3709, 0x12 }, |
| { 0x370b, 0x61 }, |
| { 0x370f, 0x10 }, |
| { 0x3715, 0x78 }, |
| { 0x3717, 0x01 }, |
| { 0x371b, 0x20 }, |
| { 0x3731, 0x12 }, |
| { 0x3901, 0x0a }, |
| { 0x3905, 0x02 }, |
| { 0x3906, 0x10 }, |
| { 0x3719, 0x86 }, |
| { 0x3810, 0x00 }, |
| { 0x3811, 0x10 }, |
| { 0x3812, 0x00 }, |
| { 0x3821, 0x01 }, |
| { 0x3824, 0x01 }, |
| { 0x3826, 0x03 }, |
| { 0x3828, 0x08 }, |
| { 0x3a19, 0xf8 }, |
| { 0x3c01, 0x34 }, |
| { 0x3c04, 0x28 }, |
| { 0x3c05, 0x98 }, |
| { 0x3c07, 0x07 }, |
| { 0x3c09, 0xc2 }, |
| { 0x3c0a, 0x9c }, |
| { 0x3c0b, 0x40 }, |
| { 0x3c01, 0x34 }, |
| { 0x4001, 0x02 }, |
| { 0x4514, 0x00 }, |
| { 0x4520, 0xb0 }, |
| { 0x460b, 0x37 }, |
| { 0x460c, 0x20 }, |
| { 0x4818, 0x01 }, |
| { 0x481d, 0xf0 }, |
| { 0x481f, 0x50 }, |
| { 0x4823, 0x70 }, |
| { 0x4831, 0x14 }, |
| { 0x5000, 0xa7 }, |
| { 0x5001, 0x83 }, |
| { 0x501d, 0x00 }, |
| { 0x501f, 0x00 }, |
| { 0x503d, 0x00 }, |
| { 0x505c, 0x30 }, |
| { 0x5181, 0x59 }, |
| { 0x5183, 0x00 }, |
| { 0x5191, 0xf0 }, |
| { 0x5192, 0x03 }, |
| { 0x5684, 0x10 }, |
| { 0x5685, 0xa0 }, |
| { 0x5686, 0x0c }, |
| { 0x5687, 0x78 }, |
| { 0x5a00, 0x08 }, |
| { 0x5a21, 0x00 }, |
| { 0x5a24, 0x00 }, |
| { 0x3008, 0x02 }, |
| { 0x3503, 0x00 }, |
| { 0x5180, 0xff }, |
| { 0x5181, 0xf2 }, |
| { 0x5182, 0x00 }, |
| { 0x5183, 0x14 }, |
| { 0x5184, 0x25 }, |
| { 0x5185, 0x24 }, |
| { 0x5186, 0x09 }, |
| { 0x5187, 0x09 }, |
| { 0x5188, 0x0a }, |
| { 0x5189, 0x75 }, |
| { 0x518a, 0x52 }, |
| { 0x518b, 0xea }, |
| { 0x518c, 0xa8 }, |
| { 0x518d, 0x42 }, |
| { 0x518e, 0x38 }, |
| { 0x518f, 0x56 }, |
| { 0x5190, 0x42 }, |
| { 0x5191, 0xf8 }, |
| { 0x5192, 0x04 }, |
| { 0x5193, 0x70 }, |
| { 0x5194, 0xf0 }, |
| { 0x5195, 0xf0 }, |
| { 0x5196, 0x03 }, |
| { 0x5197, 0x01 }, |
| { 0x5198, 0x04 }, |
| { 0x5199, 0x12 }, |
| { 0x519a, 0x04 }, |
| { 0x519b, 0x00 }, |
| { 0x519c, 0x06 }, |
| { 0x519d, 0x82 }, |
| { 0x519e, 0x38 }, |
| { 0x5381, 0x1e }, |
| { 0x5382, 0x5b }, |
| { 0x5383, 0x08 }, |
| { 0x5384, 0x0a }, |
| { 0x5385, 0x7e }, |
| { 0x5386, 0x88 }, |
| { 0x5387, 0x7c }, |
| { 0x5388, 0x6c }, |
| { 0x5389, 0x10 }, |
| { 0x538a, 0x01 }, |
| { 0x538b, 0x98 }, |
| { 0x5300, 0x08 }, |
| { 0x5301, 0x30 }, |
| { 0x5302, 0x10 }, |
| { 0x5303, 0x00 }, |
| { 0x5304, 0x08 }, |
| { 0x5305, 0x30 }, |
| { 0x5306, 0x08 }, |
| { 0x5307, 0x16 }, |
| { 0x5309, 0x08 }, |
| { 0x530a, 0x30 }, |
| { 0x530b, 0x04 }, |
| { 0x530c, 0x06 }, |
| { 0x5480, 0x01 }, |
| { 0x5481, 0x08 }, |
| { 0x5482, 0x14 }, |
| { 0x5483, 0x28 }, |
| { 0x5484, 0x51 }, |
| { 0x5485, 0x65 }, |
| { 0x5486, 0x71 }, |
| { 0x5487, 0x7d }, |
| { 0x5488, 0x87 }, |
| { 0x5489, 0x91 }, |
| { 0x548a, 0x9a }, |
| { 0x548b, 0xaa }, |
| { 0x548c, 0xb8 }, |
| { 0x548d, 0xcd }, |
| { 0x548e, 0xdd }, |
| { 0x548f, 0xea }, |
| { 0x5490, 0x1d }, |
| { 0x5580, 0x02 }, |
| { 0x5583, 0x40 }, |
| { 0x5584, 0x10 }, |
| { 0x5589, 0x10 }, |
| { 0x558a, 0x00 }, |
| { 0x558b, 0xf8 }, |
| { 0x5800, 0x3f }, |
| { 0x5801, 0x16 }, |
| { 0x5802, 0x0e }, |
| { 0x5803, 0x0d }, |
| { 0x5804, 0x17 }, |
| { 0x5805, 0x3f }, |
| { 0x5806, 0x0b }, |
| { 0x5807, 0x06 }, |
| { 0x5808, 0x04 }, |
| { 0x5809, 0x04 }, |
| { 0x580a, 0x06 }, |
| { 0x580b, 0x0b }, |
| { 0x580c, 0x09 }, |
| { 0x580d, 0x03 }, |
| { 0x580e, 0x00 }, |
| { 0x580f, 0x00 }, |
| { 0x5810, 0x03 }, |
| { 0x5811, 0x08 }, |
| { 0x5812, 0x0a }, |
| { 0x5813, 0x03 }, |
| { 0x5814, 0x00 }, |
| { 0x5815, 0x00 }, |
| { 0x5816, 0x04 }, |
| { 0x5817, 0x09 }, |
| { 0x5818, 0x0f }, |
| { 0x5819, 0x08 }, |
| { 0x581a, 0x06 }, |
| { 0x581b, 0x06 }, |
| { 0x581c, 0x08 }, |
| { 0x581d, 0x0c }, |
| { 0x581e, 0x3f }, |
| { 0x581f, 0x1e }, |
| { 0x5820, 0x12 }, |
| { 0x5821, 0x13 }, |
| { 0x5822, 0x21 }, |
| { 0x5823, 0x3f }, |
| { 0x5824, 0x68 }, |
| { 0x5825, 0x28 }, |
| { 0x5826, 0x2c }, |
| { 0x5827, 0x28 }, |
| { 0x5828, 0x08 }, |
| { 0x5829, 0x48 }, |
| { 0x582a, 0x64 }, |
| { 0x582b, 0x62 }, |
| { 0x582c, 0x64 }, |
| { 0x582d, 0x28 }, |
| { 0x582e, 0x46 }, |
| { 0x582f, 0x62 }, |
| { 0x5830, 0x60 }, |
| { 0x5831, 0x62 }, |
| { 0x5832, 0x26 }, |
| { 0x5833, 0x48 }, |
| { 0x5834, 0x66 }, |
| { 0x5835, 0x44 }, |
| { 0x5836, 0x64 }, |
| { 0x5837, 0x28 }, |
| { 0x5838, 0x66 }, |
| { 0x5839, 0x48 }, |
| { 0x583a, 0x2c }, |
| { 0x583b, 0x28 }, |
| { 0x583c, 0x26 }, |
| { 0x583d, 0xae }, |
| { 0x5025, 0x00 }, |
| { 0x3a0f, 0x30 }, |
| { 0x3a10, 0x28 }, |
| { 0x3a1b, 0x30 }, |
| { 0x3a1e, 0x26 }, |
| { 0x3a11, 0x60 }, |
| { 0x3a1f, 0x14 }, |
| { 0x0601, 0x02 }, |
| { 0x3008, 0x42 }, |
| { 0x3008, 0x02 } |
| }; |
| |
| static const struct reg_value ov5645_setting_sxga[] = { |
| { 0x3612, 0xa9 }, |
| { 0x3614, 0x50 }, |
| { 0x3618, 0x00 }, |
| { 0x3034, 0x18 }, |
| { 0x3035, 0x21 }, |
| { 0x3036, 0x70 }, |
| { 0x3600, 0x09 }, |
| { 0x3601, 0x43 }, |
| { 0x3708, 0x66 }, |
| { 0x370c, 0xc3 }, |
| { 0x3800, 0x00 }, |
| { 0x3801, 0x00 }, |
| { 0x3802, 0x00 }, |
| { 0x3803, 0x06 }, |
| { 0x3804, 0x0a }, |
| { 0x3805, 0x3f }, |
| { 0x3806, 0x07 }, |
| { 0x3807, 0x9d }, |
| { 0x3808, 0x05 }, |
| { 0x3809, 0x00 }, |
| { 0x380a, 0x03 }, |
| { 0x380b, 0xc0 }, |
| { 0x380c, 0x07 }, |
| { 0x380d, 0x68 }, |
| { 0x380e, 0x03 }, |
| { 0x380f, 0xd8 }, |
| { 0x3813, 0x06 }, |
| { 0x3814, 0x31 }, |
| { 0x3815, 0x31 }, |
| { 0x3820, 0x47 }, |
| { 0x3a02, 0x03 }, |
| { 0x3a03, 0xd8 }, |
| { 0x3a08, 0x01 }, |
| { 0x3a09, 0xf8 }, |
| { 0x3a0a, 0x01 }, |
| { 0x3a0b, 0xa4 }, |
| { 0x3a0e, 0x02 }, |
| { 0x3a0d, 0x02 }, |
| { 0x3a14, 0x03 }, |
| { 0x3a15, 0xd8 }, |
| { 0x3a18, 0x00 }, |
| { 0x4004, 0x02 }, |
| { 0x4005, 0x18 }, |
| { 0x4300, 0x32 }, |
| { 0x4202, 0x00 } |
| }; |
| |
| static const struct reg_value ov5645_setting_1080p[] = { |
| { 0x3612, 0xab }, |
| { 0x3614, 0x50 }, |
| { 0x3618, 0x04 }, |
| { 0x3034, 0x18 }, |
| { 0x3035, 0x11 }, |
| { 0x3036, 0x54 }, |
| { 0x3600, 0x08 }, |
| { 0x3601, 0x33 }, |
| { 0x3708, 0x63 }, |
| { 0x370c, 0xc0 }, |
| { 0x3800, 0x01 }, |
| { 0x3801, 0x50 }, |
| { 0x3802, 0x01 }, |
| { 0x3803, 0xb2 }, |
| { 0x3804, 0x08 }, |
| { 0x3805, 0xef }, |
| { 0x3806, 0x05 }, |
| { 0x3807, 0xf1 }, |
| { 0x3808, 0x07 }, |
| { 0x3809, 0x80 }, |
| { 0x380a, 0x04 }, |
| { 0x380b, 0x38 }, |
| { 0x380c, 0x09 }, |
| { 0x380d, 0xc4 }, |
| { 0x380e, 0x04 }, |
| { 0x380f, 0x60 }, |
| { 0x3813, 0x04 }, |
| { 0x3814, 0x11 }, |
| { 0x3815, 0x11 }, |
| { 0x3820, 0x47 }, |
| { 0x4514, 0x88 }, |
| { 0x3a02, 0x04 }, |
| { 0x3a03, 0x60 }, |
| { 0x3a08, 0x01 }, |
| { 0x3a09, 0x50 }, |
| { 0x3a0a, 0x01 }, |
| { 0x3a0b, 0x18 }, |
| { 0x3a0e, 0x03 }, |
| { 0x3a0d, 0x04 }, |
| { 0x3a14, 0x04 }, |
| { 0x3a15, 0x60 }, |
| { 0x3a18, 0x00 }, |
| { 0x4004, 0x06 }, |
| { 0x4005, 0x18 }, |
| { 0x4300, 0x32 }, |
| { 0x4202, 0x00 }, |
| { 0x4837, 0x0b } |
| }; |
| |
| static const struct reg_value ov5645_setting_full[] = { |
| { 0x3612, 0xab }, |
| { 0x3614, 0x50 }, |
| { 0x3618, 0x04 }, |
| { 0x3034, 0x18 }, |
| { 0x3035, 0x11 }, |
| { 0x3036, 0x54 }, |
| { 0x3600, 0x08 }, |
| { 0x3601, 0x33 }, |
| { 0x3708, 0x63 }, |
| { 0x370c, 0xc0 }, |
| { 0x3800, 0x00 }, |
| { 0x3801, 0x00 }, |
| { 0x3802, 0x00 }, |
| { 0x3803, 0x00 }, |
| { 0x3804, 0x0a }, |
| { 0x3805, 0x3f }, |
| { 0x3806, 0x07 }, |
| { 0x3807, 0x9f }, |
| { 0x3808, 0x0a }, |
| { 0x3809, 0x20 }, |
| { 0x380a, 0x07 }, |
| { 0x380b, 0x98 }, |
| { 0x380c, 0x0b }, |
| { 0x380d, 0x1c }, |
| { 0x380e, 0x07 }, |
| { 0x380f, 0xb0 }, |
| { 0x3813, 0x06 }, |
| { 0x3814, 0x11 }, |
| { 0x3815, 0x11 }, |
| { 0x3820, 0x47 }, |
| { 0x4514, 0x88 }, |
| { 0x3a02, 0x07 }, |
| { 0x3a03, 0xb0 }, |
| { 0x3a08, 0x01 }, |
| { 0x3a09, 0x27 }, |
| { 0x3a0a, 0x00 }, |
| { 0x3a0b, 0xf6 }, |
| { 0x3a0e, 0x06 }, |
| { 0x3a0d, 0x08 }, |
| { 0x3a14, 0x07 }, |
| { 0x3a15, 0xb0 }, |
| { 0x3a18, 0x01 }, |
| { 0x4004, 0x06 }, |
| { 0x4005, 0x18 }, |
| { 0x4300, 0x32 }, |
| { 0x4837, 0x0b }, |
| { 0x4202, 0x00 } |
| }; |
| |
| static const s64 link_freq[] = { |
| 222880000, |
| 334320000 |
| }; |
| |
| static const struct ov5645_mode_info ov5645_mode_info_data[] = { |
| { |
| .width = 1280, |
| .height = 960, |
| .data = ov5645_setting_sxga, |
| .data_size = ARRAY_SIZE(ov5645_setting_sxga), |
| .pixel_clock = 111440000, |
| .link_freq = 0 /* an index in link_freq[] */ |
| }, |
| { |
| .width = 1920, |
| .height = 1080, |
| .data = ov5645_setting_1080p, |
| .data_size = ARRAY_SIZE(ov5645_setting_1080p), |
| .pixel_clock = 167160000, |
| .link_freq = 1 /* an index in link_freq[] */ |
| }, |
| { |
| .width = 2592, |
| .height = 1944, |
| .data = ov5645_setting_full, |
| .data_size = ARRAY_SIZE(ov5645_setting_full), |
| .pixel_clock = 167160000, |
| .link_freq = 1 /* an index in link_freq[] */ |
| }, |
| }; |
| |
| static int ov5645_regulators_enable(struct ov5645 *ov5645) |
| { |
| int ret; |
| |
| ret = regulator_enable(ov5645->io_regulator); |
| if (ret < 0) { |
| dev_err(ov5645->dev, "set io voltage failed\n"); |
| return ret; |
| } |
| |
| ret = regulator_enable(ov5645->analog_regulator); |
| if (ret) { |
| dev_err(ov5645->dev, "set analog voltage failed\n"); |
| goto err_disable_io; |
| } |
| |
| ret = regulator_enable(ov5645->core_regulator); |
| if (ret) { |
| dev_err(ov5645->dev, "set core voltage failed\n"); |
| goto err_disable_analog; |
| } |
| |
| return 0; |
| |
| err_disable_analog: |
| regulator_disable(ov5645->analog_regulator); |
| err_disable_io: |
| regulator_disable(ov5645->io_regulator); |
| |
| return ret; |
| } |
| |
| static void ov5645_regulators_disable(struct ov5645 *ov5645) |
| { |
| int ret; |
| |
| ret = regulator_disable(ov5645->core_regulator); |
| if (ret < 0) |
| dev_err(ov5645->dev, "core regulator disable failed\n"); |
| |
| ret = regulator_disable(ov5645->analog_regulator); |
| if (ret < 0) |
| dev_err(ov5645->dev, "analog regulator disable failed\n"); |
| |
| ret = regulator_disable(ov5645->io_regulator); |
| if (ret < 0) |
| dev_err(ov5645->dev, "io regulator disable failed\n"); |
| } |
| |
| static int ov5645_write_reg(struct ov5645 *ov5645, u16 reg, u8 val) |
| { |
| u8 regbuf[3]; |
| int ret; |
| |
| regbuf[0] = reg >> 8; |
| regbuf[1] = reg & 0xff; |
| regbuf[2] = val; |
| |
| ret = i2c_master_send(ov5645->i2c_client, regbuf, 3); |
| if (ret < 0) |
| dev_err(ov5645->dev, "%s: write reg error %d: reg=%x, val=%x\n", |
| __func__, ret, reg, val); |
| |
| return ret; |
| } |
| |
| static int ov5645_read_reg(struct ov5645 *ov5645, u16 reg, u8 *val) |
| { |
| u8 regbuf[2]; |
| int ret; |
| |
| regbuf[0] = reg >> 8; |
| regbuf[1] = reg & 0xff; |
| |
| ret = i2c_master_send(ov5645->i2c_client, regbuf, 2); |
| if (ret < 0) { |
| dev_err(ov5645->dev, "%s: write reg error %d: reg=%x\n", |
| __func__, ret, reg); |
| return ret; |
| } |
| |
| ret = i2c_master_recv(ov5645->i2c_client, val, 1); |
| if (ret < 0) { |
| dev_err(ov5645->dev, "%s: read reg error %d: reg=%x\n", |
| __func__, ret, reg); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int ov5645_set_aec_mode(struct ov5645 *ov5645, u32 mode) |
| { |
| u8 val = ov5645->aec_pk_manual; |
| int ret; |
| |
| if (mode == V4L2_EXPOSURE_AUTO) |
| val &= ~OV5645_AEC_MANUAL_ENABLE; |
| else /* V4L2_EXPOSURE_MANUAL */ |
| val |= OV5645_AEC_MANUAL_ENABLE; |
| |
| ret = ov5645_write_reg(ov5645, OV5645_AEC_PK_MANUAL, val); |
| if (!ret) |
| ov5645->aec_pk_manual = val; |
| |
| return ret; |
| } |
| |
| static int ov5645_set_agc_mode(struct ov5645 *ov5645, u32 enable) |
| { |
| u8 val = ov5645->aec_pk_manual; |
| int ret; |
| |
| if (enable) |
| val &= ~OV5645_AGC_MANUAL_ENABLE; |
| else |
| val |= OV5645_AGC_MANUAL_ENABLE; |
| |
| ret = ov5645_write_reg(ov5645, OV5645_AEC_PK_MANUAL, val); |
| if (!ret) |
| ov5645->aec_pk_manual = val; |
| |
| return ret; |
| } |
| |
| static int ov5645_set_register_array(struct ov5645 *ov5645, |
| const struct reg_value *settings, |
| unsigned int num_settings) |
| { |
| unsigned int i; |
| int ret; |
| |
| for (i = 0; i < num_settings; ++i, ++settings) { |
| ret = ov5645_write_reg(ov5645, settings->reg, settings->val); |
| if (ret < 0) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int ov5645_set_power_on(struct ov5645 *ov5645) |
| { |
| int ret; |
| |
| ret = ov5645_regulators_enable(ov5645); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| ret = clk_prepare_enable(ov5645->xclk); |
| if (ret < 0) { |
| dev_err(ov5645->dev, "clk prepare enable failed\n"); |
| ov5645_regulators_disable(ov5645); |
| return ret; |
| } |
| |
| usleep_range(5000, 15000); |
| gpiod_set_value_cansleep(ov5645->enable_gpio, 1); |
| |
| usleep_range(1000, 2000); |
| gpiod_set_value_cansleep(ov5645->rst_gpio, 0); |
| |
| msleep(20); |
| |
| return 0; |
| } |
| |
| static void ov5645_set_power_off(struct ov5645 *ov5645) |
| { |
| gpiod_set_value_cansleep(ov5645->rst_gpio, 1); |
| gpiod_set_value_cansleep(ov5645->enable_gpio, 0); |
| clk_disable_unprepare(ov5645->xclk); |
| ov5645_regulators_disable(ov5645); |
| } |
| |
| static int ov5645_s_power(struct v4l2_subdev *sd, int on) |
| { |
| struct ov5645 *ov5645 = to_ov5645(sd); |
| int ret = 0; |
| |
| mutex_lock(&ov5645->power_lock); |
| |
| /* If the power count is modified from 0 to != 0 or from != 0 to 0, |
| * update the power state. |
| */ |
| if (ov5645->power_count == !on) { |
| if (on) { |
| ret = ov5645_set_power_on(ov5645); |
| if (ret < 0) |
| goto exit; |
| |
| ret = ov5645_set_register_array(ov5645, |
| ov5645_global_init_setting, |
| ARRAY_SIZE(ov5645_global_init_setting)); |
| if (ret < 0) { |
| dev_err(ov5645->dev, |
| "could not set init registers\n"); |
| ov5645_set_power_off(ov5645); |
| goto exit; |
| } |
| |
| ret = ov5645_write_reg(ov5645, OV5645_SYSTEM_CTRL0, |
| OV5645_SYSTEM_CTRL0_STOP); |
| if (ret < 0) { |
| ov5645_set_power_off(ov5645); |
| goto exit; |
| } |
| } else { |
| ov5645_set_power_off(ov5645); |
| } |
| } |
| |
| /* Update the power count. */ |
| ov5645->power_count += on ? 1 : -1; |
| WARN_ON(ov5645->power_count < 0); |
| |
| exit: |
| mutex_unlock(&ov5645->power_lock); |
| |
| return ret; |
| } |
| |
| static int ov5645_set_saturation(struct ov5645 *ov5645, s32 value) |
| { |
| u32 reg_value = (value * 0x10) + 0x40; |
| int ret; |
| |
| ret = ov5645_write_reg(ov5645, OV5645_SDE_SAT_U, reg_value); |
| if (ret < 0) |
| return ret; |
| |
| return ov5645_write_reg(ov5645, OV5645_SDE_SAT_V, reg_value); |
| } |
| |
| static int ov5645_set_hflip(struct ov5645 *ov5645, s32 value) |
| { |
| u8 val = ov5645->timing_tc_reg21; |
| int ret; |
| |
| if (value == 0) |
| val &= ~(OV5645_SENSOR_MIRROR); |
| else |
| val |= (OV5645_SENSOR_MIRROR); |
| |
| ret = ov5645_write_reg(ov5645, OV5645_TIMING_TC_REG21, val); |
| if (!ret) |
| ov5645->timing_tc_reg21 = val; |
| |
| return ret; |
| } |
| |
| static int ov5645_set_vflip(struct ov5645 *ov5645, s32 value) |
| { |
| u8 val = ov5645->timing_tc_reg20; |
| int ret; |
| |
| if (value == 0) |
| val |= (OV5645_SENSOR_VFLIP | OV5645_ISP_VFLIP); |
| else |
| val &= ~(OV5645_SENSOR_VFLIP | OV5645_ISP_VFLIP); |
| |
| ret = ov5645_write_reg(ov5645, OV5645_TIMING_TC_REG20, val); |
| if (!ret) |
| ov5645->timing_tc_reg20 = val; |
| |
| return ret; |
| } |
| |
| static int ov5645_set_test_pattern(struct ov5645 *ov5645, s32 value) |
| { |
| u8 val = 0; |
| |
| if (value) { |
| val = OV5645_SET_TEST_PATTERN(value - 1); |
| val |= OV5645_TEST_PATTERN_ENABLE; |
| } |
| |
| return ov5645_write_reg(ov5645, OV5645_PRE_ISP_TEST_SETTING_1, val); |
| } |
| |
| static const char * const ov5645_test_pattern_menu[] = { |
| "Disabled", |
| "Vertical Color Bars", |
| "Pseudo-Random Data", |
| "Color Square", |
| "Black Image", |
| }; |
| |
| static int ov5645_set_awb(struct ov5645 *ov5645, s32 enable_auto) |
| { |
| u8 val = 0; |
| |
| if (!enable_auto) |
| val = OV5645_AWB_MANUAL_ENABLE; |
| |
| return ov5645_write_reg(ov5645, OV5645_AWB_MANUAL_CONTROL, val); |
| } |
| |
| static int ov5645_s_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| struct ov5645 *ov5645 = container_of(ctrl->handler, |
| struct ov5645, ctrls); |
| int ret; |
| |
| mutex_lock(&ov5645->power_lock); |
| if (!ov5645->power_count) { |
| mutex_unlock(&ov5645->power_lock); |
| return 0; |
| } |
| |
| switch (ctrl->id) { |
| case V4L2_CID_SATURATION: |
| ret = ov5645_set_saturation(ov5645, ctrl->val); |
| break; |
| case V4L2_CID_AUTO_WHITE_BALANCE: |
| ret = ov5645_set_awb(ov5645, ctrl->val); |
| break; |
| case V4L2_CID_AUTOGAIN: |
| ret = ov5645_set_agc_mode(ov5645, ctrl->val); |
| break; |
| case V4L2_CID_EXPOSURE_AUTO: |
| ret = ov5645_set_aec_mode(ov5645, ctrl->val); |
| break; |
| case V4L2_CID_TEST_PATTERN: |
| ret = ov5645_set_test_pattern(ov5645, ctrl->val); |
| break; |
| case V4L2_CID_HFLIP: |
| ret = ov5645_set_hflip(ov5645, ctrl->val); |
| break; |
| case V4L2_CID_VFLIP: |
| ret = ov5645_set_vflip(ov5645, ctrl->val); |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| |
| mutex_unlock(&ov5645->power_lock); |
| |
| return ret; |
| } |
| |
| static struct v4l2_ctrl_ops ov5645_ctrl_ops = { |
| .s_ctrl = ov5645_s_ctrl, |
| }; |
| |
| static int ov5645_enum_mbus_code(struct v4l2_subdev *sd, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_mbus_code_enum *code) |
| { |
| if (code->index > 0) |
| return -EINVAL; |
| |
| code->code = MEDIA_BUS_FMT_UYVY8_2X8; |
| |
| return 0; |
| } |
| |
| static int ov5645_enum_frame_size(struct v4l2_subdev *subdev, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_frame_size_enum *fse) |
| { |
| if (fse->code != MEDIA_BUS_FMT_UYVY8_2X8) |
| return -EINVAL; |
| |
| if (fse->index >= ARRAY_SIZE(ov5645_mode_info_data)) |
| return -EINVAL; |
| |
| fse->min_width = ov5645_mode_info_data[fse->index].width; |
| fse->max_width = ov5645_mode_info_data[fse->index].width; |
| fse->min_height = ov5645_mode_info_data[fse->index].height; |
| fse->max_height = ov5645_mode_info_data[fse->index].height; |
| |
| return 0; |
| } |
| |
| static struct v4l2_mbus_framefmt * |
| __ov5645_get_pad_format(struct ov5645 *ov5645, |
| struct v4l2_subdev_pad_config *cfg, |
| unsigned int pad, |
| enum v4l2_subdev_format_whence which) |
| { |
| switch (which) { |
| case V4L2_SUBDEV_FORMAT_TRY: |
| return v4l2_subdev_get_try_format(&ov5645->sd, cfg, pad); |
| case V4L2_SUBDEV_FORMAT_ACTIVE: |
| return &ov5645->fmt; |
| default: |
| return NULL; |
| } |
| } |
| |
| static int ov5645_get_format(struct v4l2_subdev *sd, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_format *format) |
| { |
| struct ov5645 *ov5645 = to_ov5645(sd); |
| |
| format->format = *__ov5645_get_pad_format(ov5645, cfg, format->pad, |
| format->which); |
| return 0; |
| } |
| |
| static struct v4l2_rect * |
| __ov5645_get_pad_crop(struct ov5645 *ov5645, struct v4l2_subdev_pad_config *cfg, |
| unsigned int pad, enum v4l2_subdev_format_whence which) |
| { |
| switch (which) { |
| case V4L2_SUBDEV_FORMAT_TRY: |
| return v4l2_subdev_get_try_crop(&ov5645->sd, cfg, pad); |
| case V4L2_SUBDEV_FORMAT_ACTIVE: |
| return &ov5645->crop; |
| default: |
| return NULL; |
| } |
| } |
| |
| static const struct ov5645_mode_info * |
| ov5645_find_nearest_mode(unsigned int width, unsigned int height) |
| { |
| int i; |
| |
| for (i = ARRAY_SIZE(ov5645_mode_info_data) - 1; i >= 0; i--) { |
| if (ov5645_mode_info_data[i].width <= width && |
| ov5645_mode_info_data[i].height <= height) |
| break; |
| } |
| |
| if (i < 0) |
| i = 0; |
| |
| return &ov5645_mode_info_data[i]; |
| } |
| |
| static int ov5645_set_format(struct v4l2_subdev *sd, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_format *format) |
| { |
| struct ov5645 *ov5645 = to_ov5645(sd); |
| struct v4l2_mbus_framefmt *__format; |
| struct v4l2_rect *__crop; |
| const struct ov5645_mode_info *new_mode; |
| int ret; |
| |
| __crop = __ov5645_get_pad_crop(ov5645, cfg, format->pad, |
| format->which); |
| |
| new_mode = ov5645_find_nearest_mode(format->format.width, |
| format->format.height); |
| __crop->width = new_mode->width; |
| __crop->height = new_mode->height; |
| |
| if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) { |
| ret = v4l2_ctrl_s_ctrl_int64(ov5645->pixel_clock, |
| new_mode->pixel_clock); |
| if (ret < 0) |
| return ret; |
| |
| ret = v4l2_ctrl_s_ctrl(ov5645->link_freq, |
| new_mode->link_freq); |
| if (ret < 0) |
| return ret; |
| |
| ov5645->current_mode = new_mode; |
| } |
| |
| __format = __ov5645_get_pad_format(ov5645, cfg, format->pad, |
| format->which); |
| __format->width = __crop->width; |
| __format->height = __crop->height; |
| __format->code = MEDIA_BUS_FMT_UYVY8_2X8; |
| __format->field = V4L2_FIELD_NONE; |
| __format->colorspace = V4L2_COLORSPACE_SRGB; |
| |
| format->format = *__format; |
| |
| return 0; |
| } |
| |
| static int ov5645_entity_init_cfg(struct v4l2_subdev *subdev, |
| struct v4l2_subdev_pad_config *cfg) |
| { |
| struct v4l2_subdev_format fmt = { 0 }; |
| |
| fmt.which = cfg ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE; |
| fmt.format.width = 1920; |
| fmt.format.height = 1080; |
| |
| ov5645_set_format(subdev, cfg, &fmt); |
| |
| return 0; |
| } |
| |
| static int ov5645_get_selection(struct v4l2_subdev *sd, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_selection *sel) |
| { |
| struct ov5645 *ov5645 = to_ov5645(sd); |
| |
| if (sel->target != V4L2_SEL_TGT_CROP) |
| return -EINVAL; |
| |
| sel->r = *__ov5645_get_pad_crop(ov5645, cfg, sel->pad, |
| sel->which); |
| return 0; |
| } |
| |
| static int ov5645_s_stream(struct v4l2_subdev *subdev, int enable) |
| { |
| struct ov5645 *ov5645 = to_ov5645(subdev); |
| int ret; |
| |
| if (enable) { |
| ret = ov5645_set_register_array(ov5645, |
| ov5645->current_mode->data, |
| ov5645->current_mode->data_size); |
| if (ret < 0) { |
| dev_err(ov5645->dev, "could not set mode %dx%d\n", |
| ov5645->current_mode->width, |
| ov5645->current_mode->height); |
| return ret; |
| } |
| ret = v4l2_ctrl_handler_setup(&ov5645->ctrls); |
| if (ret < 0) { |
| dev_err(ov5645->dev, "could not sync v4l2 controls\n"); |
| return ret; |
| } |
| ret = ov5645_write_reg(ov5645, OV5645_SYSTEM_CTRL0, |
| OV5645_SYSTEM_CTRL0_START); |
| if (ret < 0) |
| return ret; |
| } else { |
| ret = ov5645_write_reg(ov5645, OV5645_SYSTEM_CTRL0, |
| OV5645_SYSTEM_CTRL0_STOP); |
| if (ret < 0) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static const struct v4l2_subdev_core_ops ov5645_core_ops = { |
| .s_power = ov5645_s_power, |
| }; |
| |
| static const struct v4l2_subdev_video_ops ov5645_video_ops = { |
| .s_stream = ov5645_s_stream, |
| }; |
| |
| static const struct v4l2_subdev_pad_ops ov5645_subdev_pad_ops = { |
| .init_cfg = ov5645_entity_init_cfg, |
| .enum_mbus_code = ov5645_enum_mbus_code, |
| .enum_frame_size = ov5645_enum_frame_size, |
| .get_fmt = ov5645_get_format, |
| .set_fmt = ov5645_set_format, |
| .get_selection = ov5645_get_selection, |
| }; |
| |
| static const struct v4l2_subdev_ops ov5645_subdev_ops = { |
| .core = &ov5645_core_ops, |
| .video = &ov5645_video_ops, |
| .pad = &ov5645_subdev_pad_ops, |
| }; |
| |
| static int ov5645_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct device *dev = &client->dev; |
| struct device_node *endpoint; |
| struct ov5645 *ov5645; |
| u8 chip_id_high, chip_id_low; |
| u32 xclk_freq; |
| int ret; |
| |
| ov5645 = devm_kzalloc(dev, sizeof(struct ov5645), GFP_KERNEL); |
| if (!ov5645) |
| return -ENOMEM; |
| |
| ov5645->i2c_client = client; |
| ov5645->dev = dev; |
| |
| endpoint = of_graph_get_next_endpoint(dev->of_node, NULL); |
| if (!endpoint) { |
| dev_err(dev, "endpoint node not found\n"); |
| return -EINVAL; |
| } |
| |
| ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(endpoint), |
| &ov5645->ep); |
| if (ret < 0) { |
| dev_err(dev, "parsing endpoint node failed\n"); |
| return ret; |
| } |
| |
| of_node_put(endpoint); |
| |
| if (ov5645->ep.bus_type != V4L2_MBUS_CSI2) { |
| dev_err(dev, "invalid bus type, must be CSI2\n"); |
| return -EINVAL; |
| } |
| |
| /* get system clock (xclk) */ |
| ov5645->xclk = devm_clk_get(dev, "xclk"); |
| if (IS_ERR(ov5645->xclk)) { |
| dev_err(dev, "could not get xclk"); |
| return PTR_ERR(ov5645->xclk); |
| } |
| |
| ret = of_property_read_u32(dev->of_node, "clock-frequency", &xclk_freq); |
| if (ret) { |
| dev_err(dev, "could not get xclk frequency\n"); |
| return ret; |
| } |
| |
| if (xclk_freq != 23880000) { |
| dev_err(dev, "external clock frequency %u is not supported\n", |
| xclk_freq); |
| return -EINVAL; |
| } |
| |
| ret = clk_set_rate(ov5645->xclk, xclk_freq); |
| if (ret) { |
| dev_err(dev, "could not set xclk frequency\n"); |
| return ret; |
| } |
| |
| ov5645->io_regulator = devm_regulator_get(dev, "vdddo"); |
| if (IS_ERR(ov5645->io_regulator)) { |
| dev_err(dev, "cannot get io regulator\n"); |
| return PTR_ERR(ov5645->io_regulator); |
| } |
| |
| ret = regulator_set_voltage(ov5645->io_regulator, |
| OV5645_VOLTAGE_DIGITAL_IO, |
| OV5645_VOLTAGE_DIGITAL_IO); |
| if (ret < 0) { |
| dev_err(dev, "cannot set io voltage\n"); |
| return ret; |
| } |
| |
| ov5645->core_regulator = devm_regulator_get(dev, "vddd"); |
| if (IS_ERR(ov5645->core_regulator)) { |
| dev_err(dev, "cannot get core regulator\n"); |
| return PTR_ERR(ov5645->core_regulator); |
| } |
| |
| ret = regulator_set_voltage(ov5645->core_regulator, |
| OV5645_VOLTAGE_DIGITAL_CORE, |
| OV5645_VOLTAGE_DIGITAL_CORE); |
| if (ret < 0) { |
| dev_err(dev, "cannot set core voltage\n"); |
| return ret; |
| } |
| |
| ov5645->analog_regulator = devm_regulator_get(dev, "vdda"); |
| if (IS_ERR(ov5645->analog_regulator)) { |
| dev_err(dev, "cannot get analog regulator\n"); |
| return PTR_ERR(ov5645->analog_regulator); |
| } |
| |
| ret = regulator_set_voltage(ov5645->analog_regulator, |
| OV5645_VOLTAGE_ANALOG, |
| OV5645_VOLTAGE_ANALOG); |
| if (ret < 0) { |
| dev_err(dev, "cannot set analog voltage\n"); |
| return ret; |
| } |
| |
| ov5645->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_HIGH); |
| if (IS_ERR(ov5645->enable_gpio)) { |
| dev_err(dev, "cannot get enable gpio\n"); |
| return PTR_ERR(ov5645->enable_gpio); |
| } |
| |
| ov5645->rst_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); |
| if (IS_ERR(ov5645->rst_gpio)) { |
| dev_err(dev, "cannot get reset gpio\n"); |
| return PTR_ERR(ov5645->rst_gpio); |
| } |
| |
| mutex_init(&ov5645->power_lock); |
| |
| v4l2_ctrl_handler_init(&ov5645->ctrls, 9); |
| v4l2_ctrl_new_std(&ov5645->ctrls, &ov5645_ctrl_ops, |
| V4L2_CID_SATURATION, -4, 4, 1, 0); |
| v4l2_ctrl_new_std(&ov5645->ctrls, &ov5645_ctrl_ops, |
| V4L2_CID_HFLIP, 0, 1, 1, 0); |
| v4l2_ctrl_new_std(&ov5645->ctrls, &ov5645_ctrl_ops, |
| V4L2_CID_VFLIP, 0, 1, 1, 0); |
| v4l2_ctrl_new_std(&ov5645->ctrls, &ov5645_ctrl_ops, |
| V4L2_CID_AUTOGAIN, 0, 1, 1, 1); |
| v4l2_ctrl_new_std(&ov5645->ctrls, &ov5645_ctrl_ops, |
| V4L2_CID_AUTO_WHITE_BALANCE, 0, 1, 1, 1); |
| v4l2_ctrl_new_std_menu(&ov5645->ctrls, &ov5645_ctrl_ops, |
| V4L2_CID_EXPOSURE_AUTO, V4L2_EXPOSURE_MANUAL, |
| 0, V4L2_EXPOSURE_AUTO); |
| v4l2_ctrl_new_std_menu_items(&ov5645->ctrls, &ov5645_ctrl_ops, |
| V4L2_CID_TEST_PATTERN, |
| ARRAY_SIZE(ov5645_test_pattern_menu) - 1, |
| 0, 0, ov5645_test_pattern_menu); |
| ov5645->pixel_clock = v4l2_ctrl_new_std(&ov5645->ctrls, |
| &ov5645_ctrl_ops, |
| V4L2_CID_PIXEL_RATE, |
| 1, INT_MAX, 1, 1); |
| ov5645->link_freq = v4l2_ctrl_new_int_menu(&ov5645->ctrls, |
| &ov5645_ctrl_ops, |
| V4L2_CID_LINK_FREQ, |
| ARRAY_SIZE(link_freq) - 1, |
| 0, link_freq); |
| if (ov5645->link_freq) |
| ov5645->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY; |
| |
| ov5645->sd.ctrl_handler = &ov5645->ctrls; |
| |
| if (ov5645->ctrls.error) { |
| dev_err(dev, "%s: control initialization error %d\n", |
| __func__, ov5645->ctrls.error); |
| ret = ov5645->ctrls.error; |
| goto free_ctrl; |
| } |
| |
| v4l2_i2c_subdev_init(&ov5645->sd, client, &ov5645_subdev_ops); |
| ov5645->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; |
| ov5645->pad.flags = MEDIA_PAD_FL_SOURCE; |
| ov5645->sd.dev = &client->dev; |
| ov5645->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; |
| |
| ret = media_entity_pads_init(&ov5645->sd.entity, 1, &ov5645->pad); |
| if (ret < 0) { |
| dev_err(dev, "could not register media entity\n"); |
| goto free_ctrl; |
| } |
| |
| ret = ov5645_s_power(&ov5645->sd, true); |
| if (ret < 0) { |
| dev_err(dev, "could not power up OV5645\n"); |
| goto free_entity; |
| } |
| |
| ret = ov5645_read_reg(ov5645, OV5645_CHIP_ID_HIGH, &chip_id_high); |
| if (ret < 0 || chip_id_high != OV5645_CHIP_ID_HIGH_BYTE) { |
| dev_err(dev, "could not read ID high\n"); |
| ret = -ENODEV; |
| goto power_down; |
| } |
| ret = ov5645_read_reg(ov5645, OV5645_CHIP_ID_LOW, &chip_id_low); |
| if (ret < 0 || chip_id_low != OV5645_CHIP_ID_LOW_BYTE) { |
| dev_err(dev, "could not read ID low\n"); |
| ret = -ENODEV; |
| goto power_down; |
| } |
| |
| dev_info(dev, "OV5645 detected at address 0x%02x\n", client->addr); |
| |
| ret = ov5645_read_reg(ov5645, OV5645_AEC_PK_MANUAL, |
| &ov5645->aec_pk_manual); |
| if (ret < 0) { |
| dev_err(dev, "could not read AEC/AGC mode\n"); |
| ret = -ENODEV; |
| goto power_down; |
| } |
| |
| ret = ov5645_read_reg(ov5645, OV5645_TIMING_TC_REG20, |
| &ov5645->timing_tc_reg20); |
| if (ret < 0) { |
| dev_err(dev, "could not read vflip value\n"); |
| ret = -ENODEV; |
| goto power_down; |
| } |
| |
| ret = ov5645_read_reg(ov5645, OV5645_TIMING_TC_REG21, |
| &ov5645->timing_tc_reg21); |
| if (ret < 0) { |
| dev_err(dev, "could not read hflip value\n"); |
| ret = -ENODEV; |
| goto power_down; |
| } |
| |
| ov5645_s_power(&ov5645->sd, false); |
| |
| ret = v4l2_async_register_subdev(&ov5645->sd); |
| if (ret < 0) { |
| dev_err(dev, "could not register v4l2 device\n"); |
| goto free_entity; |
| } |
| |
| ov5645_entity_init_cfg(&ov5645->sd, NULL); |
| |
| return 0; |
| |
| power_down: |
| ov5645_s_power(&ov5645->sd, false); |
| free_entity: |
| media_entity_cleanup(&ov5645->sd.entity); |
| free_ctrl: |
| v4l2_ctrl_handler_free(&ov5645->ctrls); |
| mutex_destroy(&ov5645->power_lock); |
| |
| return ret; |
| } |
| |
| static int ov5645_remove(struct i2c_client *client) |
| { |
| struct v4l2_subdev *sd = i2c_get_clientdata(client); |
| struct ov5645 *ov5645 = to_ov5645(sd); |
| |
| v4l2_async_unregister_subdev(&ov5645->sd); |
| media_entity_cleanup(&ov5645->sd.entity); |
| v4l2_ctrl_handler_free(&ov5645->ctrls); |
| mutex_destroy(&ov5645->power_lock); |
| |
| return 0; |
| } |
| |
| static const struct i2c_device_id ov5645_id[] = { |
| { "ov5645", 0 }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(i2c, ov5645_id); |
| |
| static const struct of_device_id ov5645_of_match[] = { |
| { .compatible = "ovti,ov5645" }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, ov5645_of_match); |
| |
| static struct i2c_driver ov5645_i2c_driver = { |
| .driver = { |
| .of_match_table = of_match_ptr(ov5645_of_match), |
| .name = "ov5645", |
| }, |
| .probe = ov5645_probe, |
| .remove = ov5645_remove, |
| .id_table = ov5645_id, |
| }; |
| |
| module_i2c_driver(ov5645_i2c_driver); |
| |
| MODULE_DESCRIPTION("Omnivision OV5645 Camera Driver"); |
| MODULE_AUTHOR("Todor Tomov <todor.tomov@linaro.org>"); |
| MODULE_LICENSE("GPL v2"); |